summaryrefslogtreecommitdiffhomepage
path: root/test
AgeCommit message (Collapse)Author
2021-01-20Fix typo boundry -> boundary.Dean Deng
PiperOrigin-RevId: 352905565
2021-01-19platform/ptrace: workaround a kernel ptrace issue on ARM64Andrei Vagin
On ARM64, when ptrace stops on a system call, it uses the x7 register to indicate whether the stop has been signalled from syscall entry or syscall exit. This means that we can't get a value of this register and we can't change it. More details are in the comment for tracehook_report_syscall in arch/arm64/kernel/ptrace.c. This happens only if we stop on a system call, so let's queue a signal, resume a stub thread and catch it on a signal handling. Fixes: #5238 PiperOrigin-RevId: 352668695
2021-01-19Ensure that IP{V6}_RECVORIGDSTADDR yields the post-NAT address and port.Kevin Krakauer
PiperOrigin-RevId: 352624174
2021-01-15Correctly return EMSGSIZE when packet is too big in raw socket.Ting-Yu Wang
IPv4 previously accepts the packet, while IPv6 panics. Neither is the behavior in Linux. splice() in Linux has different behavior than in gVisor. This change documents it in the SpliceTooLong test. Reported-by: syzbot+b550e78e5c24d1d521f2@syzkaller.appspotmail.com PiperOrigin-RevId: 352091286
2021-01-15Add fsstress testsFabricio Voznika
Updates #5273 PiperOrigin-RevId: 352088736
2021-01-15Support TEST_PREMATURE_EXIT_FILE in syscall testsFabricio Voznika
PiperOrigin-RevId: 352068182
2021-01-15Add sanity check on return values from WriteTing-Yu Wang
io.Writer.Write requires err to be non-nil if n < len(v). We could allow this but it will be irreversible if users depend on this behavior. Ported the test that discovered this. PiperOrigin-RevId: 352065946
2021-01-15Add tests for cases of ARP failures on TCP connectMithun Iyer
Also fix test expectation for UDP sendto() case in tuntap syscall test. Fixes #5155 PiperOrigin-RevId: 352056612
2021-01-14Simplify the pipe implementation.Jamie Liu
- Remove the pipe package's dependence on the buffer package, which becomes unused as a result. The buffer package is currently intended to serve two use cases, pipes and temporary buffers, and does neither optimally as a result; this change facilitates retooling the buffer package to better serve the latter. - Pass callbacks taking safemem.BlockSeq to the internal pipe I/O methods, which makes most callbacks trivial. - Fix VFS1's splice() and tee() to immediately return if a pipe returns a partial write. PiperOrigin-RevId: 351911375
2021-01-14Check for existence before permissionsFabricio Voznika
Return EEXIST when overwritting a file as long as the caller has exec permission on the parent directory, even if the caller doesn't have write permission. Also reordered the mount write check, which happens before permission is checked. Closes #5164 PiperOrigin-RevId: 351868123
2021-01-13Switch uses of os.Getenv that check for empty string to os.LookupEnv.Dean Deng
Whether the variable was found is already returned by syscall.Getenv. os.Getenv drops this value while os.Lookupenv passes it along. PiperOrigin-RevId: 351674032
2021-01-13Fix minor typosMichael Pratt
PiperOrigin-RevId: 351606635
2021-01-12Delete shim v1Fabricio Voznika
gvisor-containerd-shim is not compatible with containerd 1.1 or earlier. Starting from containerd 1.2, shim v2 is the preferred interface. PiperOrigin-RevId: 351485556
2021-01-12[rack] Set up TLP timer and configure timeout.Ayush Ranjan
This change implements TLP details enumerated in https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.5.1. Fixes #5083 PiperOrigin-RevId: 351467357
2021-01-12Fix simple mistakes identified by goreportcard.Adin Scannell
These are primarily simplification and lint mistakes. However, minor fixes are also included and tests added where appropriate. PiperOrigin-RevId: 351425971
2021-01-07Fix tuntap_test to cleanup after CreateInterfaceNoCapMithun Iyer
PiperOrigin-RevId: 350646249
2021-01-07netstack: Refactor tcpip.Endpoint.ReadTing-Yu Wang
Read now takes a destination io.Writer, count, options. Keeping the method name Read, in contrast to the Write method. This enables: * direct transfer of views under VV * zero copy It also eliminates the need for sentry to keep a slice of view because userspace had requested a read that is smaller than the view returned, removing the complexity there. Read/Peek/ReadPacket are now consolidated together and some duplicate code is removed. PiperOrigin-RevId: 350636322
2021-01-07Fix native benchmarks.Adin Scannell
PiperOrigin-RevId: 350509137
2021-01-06Run external networking testKevin Krakauer
PiperOrigin-RevId: 350438564
2021-01-06Support add/remove IPv6 multicast group sock optGhanan Gowripalan
IPv4 was always supported but UDP never supported joining/leaving IPv6 multicast groups via socket options. Add: IPPROTO_IPV6, IPV6_JOIN_GROUP/IPV6_ADD_MEMBERSHIP Remove: IPPROTO_IPV6, IPV6_LEAVE_GROUP/IPV6_DROP_MEMBERSHIP Test: integration_test.TestUDPAddRemoveMembershipSocketOption PiperOrigin-RevId: 350396072
2021-01-05Don't check that msg_flags contains MSG_ERRQUEUE on gvisor platforms.Andrei Vagin
PiperOrigin-RevId: 350246333
2021-01-05Add benchmarks targets to BuildKite.Adin Scannell
This includes minor fix-ups: * Handle SIGTERM in runsc debug, to exit gracefully. * Fix cmd.debug.go opening all profiles as RDONLY. * Fix the test name in fio_test.go, and encode the block size in the test. PiperOrigin-RevId: 350205718
2021-01-05fs/fuse: check that a task has a specified file descriptorAndrei Vagin
Reported-by: syzbot+814105309d2ae8651084@syzkaller.appspotmail.com PiperOrigin-RevId: 350159452
2020-12-30Add test for open(2) with O_WRONLY|O_RDWR.Dean Deng
PiperOrigin-RevId: 349607959
2020-12-29Deflake TestBindOverlay in //test/e2e:integration_testTing-Yu Wang
Test failure happens when `echo` writes late: * Server nc shuts down write when it sees EOF from stdin. * Client nc closes the connection when it detects EOF from socket and no data in internal write buffer. Using `-q` flag to make server not shutting down write in the beginning, while letting connection to be closed by client. As `-q` flag's default value varies in different netcat versions, we always specify it to prevent future breakage. PiperOrigin-RevId: 349504016
2020-12-29Simplify profiling and benchmarks.Adin Scannell
- Tweak the benchmarks to work with b.N where appropriate. In many cases, b.N was simply being ignored. This creates an implicit dependency in the user passing a reasonable benchtime (less than or equal to the actual runtime of the test, or using the X syntax) otherwise the test runs forever. - In cases where the above is impossible, explicitly set benchtime from the test wrapper, to prevent the above behavior (tensorflow). - Drop the *Reverse variants, which are simply hey benchmarks. We should just add a hey benchmark. The platforms benchmarks already include a native platform, and thus these benchmarks are incredibly confusing. (In other words, BenchmarkNginxReverse has nothing to do with an nginx benchmark for runsc.) - Remove the redunant Harness object, which contains no state, in order to slightly simplify the code. - Make Block and Heap profiling actually work, but setting appropriate runtime parameters (and plumbing them through the config). - Split the profiling into two phases: start and stop, since some will need to be started early, and others will need to happen at the end. PiperOrigin-RevId: 349495377
2020-12-29Deflake semaphore_test_nativeJing Chen
PiperOrigin-RevId: 349490873
2020-12-29Export socket_ipv6_udp_unbound_loopback.ccTamir Duberstein
PiperOrigin-RevId: 349458984
2020-12-28Merge pull request #5166 from kevinGC:bk-warningsgVisor bot
PiperOrigin-RevId: 349314945
2020-12-23Resolve compiler warningsKevin Krakauer
The buildkite syscall tests start with a lot of C++ warnings. This cleans that up a little.
2020-12-23vfs1: don't allow to open socket filesAndrei Vagin
open() has to return ENXIO in this case. O_PATH isn't supported by vfs1. PiperOrigin-RevId: 348820478
2020-12-22Internal change.gVisor bot
PiperOrigin-RevId: 348720223
2020-12-17Internal change.gVisor bot
PiperOrigin-RevId: 348089449
2020-12-17Fix seek on /proc/pid/cmdline when task is zombie.Nicolas Lacasse
PiperOrigin-RevId: 348056159
2020-12-17[netstack] Implement IP(V6)_RECVERR socket option.Ayush Ranjan
PiperOrigin-RevId: 348055514
2020-12-17Set max memory not minFabricio Voznika
Closes #5048 PiperOrigin-RevId: 348050472
2020-12-16Ensure correctness of saved receive windowMithun Iyer
When the scaled receive window size > 65535 (max uint16), we advertise the scaled value as 65535, but are not adjusting the saved receive window value when doing so. This would keep our current window calculation logic to be incorrect, as the saved receive window value is different from what was advertised. Fixes #4903 PiperOrigin-RevId: 347771340
2020-12-15Implement command SEM_INFO and SEM_STAT for semctl.Jing Chen
PiperOrigin-RevId: 347711998
2020-12-15Fix error code for connect in raw sockets.Nayana Bidari
PiperOrigin-RevId: 347650354
2020-12-14[netstack] Update raw socket and hostinet control message parsing.Ayush Ranjan
There are surprisingly few syscall tests that run with hostinet. For example running the following command only returns two results: `bazel query test/syscalls:all | grep hostnet` I think as a result, as our control messages evolved, hostinet was left behind. Update it to support all control messages netstack supports. This change also updates sentry's control message parsing logic to make it up to date with all the control messages we support. PiperOrigin-RevId: 347508892
2020-12-14Move SO_ERROR and SO_OOBINLINE option to socketops.Nayana Bidari
SO_OOBINLINE option is set/get as boolean value, which is the same as linux. As we currently do not support disabling this option, we always return it as true. PiperOrigin-RevId: 347413905
2020-12-12Introduce IPv6 extension header serialization facilitiesBruno Dal Bo
Adds IPv6 extension header serializer and Hop by Hop options serializer. Add RouterAlert option serializer and use it in MLD. Fixed #4996 Startblock: has LGTM from marinaciocea and then add reviewer ghanan PiperOrigin-RevId: 347174537
2020-12-11Fix long running bazel build jobs.Zach Koopmans
- Skip the bazel clean command on the last run of the benchmark. - Use --test.benchtime=1ns to force running the benchmark once (https://github.com/golang/go/issues/32051) PiperOrigin-RevId: 347124606
2020-12-11Fix panic when IPv4 address is used in sendmsg for IPv6 socketsNayana Bidari
We do not rely on error for getsockopt options(which have boolean values) anymore. This will cause issue in sendmsg where we used to return error for IPV6_V6Only option. Fix the panic by returning error (for sockets other than TCP and UDP) if the address does not match the type(AF_INET/AF_INET6) of the socket. PiperOrigin-RevId: 347063838
2020-12-11Adjust requests to be constant equal to b.N in network tests.Zach Koopmans
For "hey", requests >= concurrency. b.N can be set by the --test.benchtime={b.N}x. The previous setting of b.N * c can be surprisingly slow for larger c. Set the requests to max(b.N, c) and log to the user if it is c. PiperOrigin-RevId: 347053675
2020-12-11Remove existing nogo exceptions.Adin Scannell
PiperOrigin-RevId: 347047550
2020-12-11Make semctl IPC_INFO cmd return the index of highest used entry.Jing Chen
PiperOrigin-RevId: 346973338
2020-12-10Log window sizeTamir Duberstein
Without this change, this test produces quite opaque errors as valid TCP segments are not logged; what we see in the end is any random traffic that happened *after* the final TCP segment. PiperOrigin-RevId: 346864169
2020-12-10Uncomment payload generationTamir Duberstein
PiperOrigin-RevId: 346852543
2020-12-10Correctly align non-matching layersTamir Duberstein
PiperOrigin-RevId: 346840424
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 05:05:18 +0000