Age | Commit message (Collapse) | Author |
|
Msgqueue tests were using fork() to run create a separate thread of
execution for passing messages back and forth over a queue. However,
the child process after a fork() may only use async-signal-safe
functions, which at a minimum exclude gtest asserts.
Instead, use threads.
PiperOrigin-RevId: 389073744
|
|
For file-based mmap tests, the underlying file system may not support
mmaps depending on the sandbox configuration. This is case when
caching is disabled for goferfs.
PiperOrigin-RevId: 389052722
|
|
In this case, the task is already a subreaper, so setting this bit is a noop.
Updates #2323
PiperOrigin-RevId: 388828034
|
|
PiperOrigin-RevId: 388819374
|
|
This change makes these tests easier to run on systems that have their temp
directory in another location.
PiperOrigin-RevId: 388601202
|
|
PiperOrigin-RevId: 388497055
|
|
PiperOrigin-RevId: 388494554
|
|
Implement Queue.Copy and add more tests for it.
Updates #135
|
|
Add support for msgsnd and msgrcv and enable syscall tests.
Updates #135
|
|
Updates #135
|
|
Updates #135
|
|
This change will allow us to remove the default link in a packetimpact test so
we can reduce indeterministic behaviors as required in https://fxbug.dev/78430.
This will also help with testing #1388.
Updates #578, #1388.
PiperOrigin-RevId: 387896847
|
|
PiperOrigin-RevId: 387885663
|
|
For comparison:
```
$ docker run --rm -it ubuntu:focal bash -c 'cat /proc/self/status'
Name: cat
Umask: 0022
State: R (running)
Tgid: 1
Ngid: 0
Pid: 1
PPid: 0
TracerPid: 0
Uid: 0 0 0 0
Gid: 0 0 0 0
FDSize: 64
Groups:
NStgid: 1
NSpid: 1
NSpgid: 1
NSsid: 1
VmPeak: 2660 kB
VmSize: 2660 kB
VmLck: 0 kB
VmPin: 0 kB
VmHWM: 528 kB
VmRSS: 528 kB
...
$ docker run --runtime=runsc-vfs2 --rm -it ubuntu:focal bash -c 'cat /proc/self/status'
Name: cat
State: R (running)
Tgid: 1
Pid: 1
PPid: 0
TracerPid: 0
Uid: 0 0 0 0
Gid: 0 0 0 0
FDSize: 4
Groups:
VmSize: 10708 kB
VmRSS: 3124 kB
VmData: 316 kB
...
```
Fixes #6374
PiperOrigin-RevId: 387465655
|
|
PiperOrigin-RevId: 387431049
|
|
|
|
PiperOrigin-RevId: 386988406
|
|
PiperOrigin-RevId: 386533065
|
|
Reported-by: syzbot+beb099a67f670386a367@syzkaller.appspotmail.com
PiperOrigin-RevId: 386521361
|
|
PiperOrigin-RevId: 386511209
|
|
The self-admittedly arbitrary threshold of 20% of alarms being sent to the main
thread was being breached. I saw a run of of ~20-23% [1]. We should allow for a
little more breathing room.
1 - https://buildkite.com/gvisor/pipeline/builds/7400
PiperOrigin-RevId: 386503482
|
|
The benchmark check fails if any of the socket syscalls fail with
EINTR. We see this manifest in S/R lifecycles since S/R has a high
probability of aborting these syscalls with EINTR.
PiperOrigin-RevId: 386480365
|
|
...and rename the library to socket_util.
PiperOrigin-RevId: 386348306
|
|
PiperOrigin-RevId: 386323389
|
|
PiperOrigin-RevId: 385944428
|
|
PiperOrigin-RevId: 385940836
|
|
PiperOrigin-RevId: 385937353
|
|
The gofer session is killed when a gofer backed volume is unmounted. The
gofer monitor catches the disconnect and kills the container. This changes
the gofer monitor to only care about the rootfs connections, which cannot
be unmounted.
Fixes #6259
PiperOrigin-RevId: 385929039
|
|
PiperOrigin-RevId: 385894869
|
|
TCP is fully supported. As with SO_RCVBUF, other transport protocols perform
no-ops per DefaultSocketOptionsHandler.OnSetReceiveBufferSize.
PiperOrigin-RevId: 385023239
|
|
PiperOrigin-RevId: 384823097
|
|
Tested via:
```
bazel test \
//test/syscalls:socket_ipv4_udp_unbound_loopback_nogotsan_test_runsc_ptrace
--runs_per_test=2000
```
PiperOrigin-RevId: 384773477
|
|
PiperOrigin-RevId: 384586164
|
|
Add support for msgget, and msgctl(IPC_RMID), and enable msgqueue
syscall tests.
Updates #135
|
|
Updates #135
|
|
Instead, roll the output scraping into the main runner. Pass a perf flag to
the runner in order to control leak checking, apply tags via the macro and
appropriately disable logging. This may be removed in the future.
PiperOrigin-RevId: 384348035
|
|
Set stdio ownership based on the container's user to ensure the
user can open/read/write to/from stdios.
1. stdios in the host are changed to have the owner be the same
uid/gid of the process running the sandbox. This ensures that the
sandbox has full control over it.
2. stdios owner owner inside the sandbox is changed to match the
container's user to give access inside the container and make it
behave the same as runc.
Fixes #6180
PiperOrigin-RevId: 384347009
|
|
PiperOrigin-RevId: 384295543
|
|
PiperOrigin-RevId: 383689096
|
|
This test single handedly causes the syscalls:socket_inet_loopback_test test
variants to take more than an hour to run on some of our testing environments.
Reduce how aggressively this test tries to replicate a fixed flake. This is a
regression test.
PiperOrigin-RevId: 382849039
|
|
In gVisor today its possible that when trying to bind a TCP socket
w/ SO_REUSEADDR specified and requesting the kernel pick a port by
setting port to zero can result in a previously bound port being
returned. This behaviour is incorrect as the user is clearly requesting
a free port. The behaviour is fine when the user explicity specifies
a port.
This change now checks if the user specified a port when making a port
reservation for a TCP port and only returns unbound ports even if
SO_REUSEADDR was specified.
Fixes #6209
PiperOrigin-RevId: 382607638
|
|
PiperOrigin-RevId: 382202462
|
|
PiperOrigin-RevId: 382194711
|
|
When TUN is created with IFF_NO_PI flag, there will be no Ethernet header and no packet info, therefore, both read and write will fail.
This commit fix this bug.
|
|
dns
PiperOrigin-RevId: 381949375
|
|
PiperOrigin-RevId: 381896875
|
|
PiperOrigin-RevId: 381515399
|
|
PiperOrigin-RevId: 381508674
|
|
This creates new user and network namespaces for all tests in
`:socket_inet_loopback_isolated_test_linux`.
PiperOrigin-RevId: 381374120
|
|
Compare
if (!thread_group_leader(tracee))
tracee = rcu_dereference(tracee->group_leader);
in security/yama/yama_lsm.c:ptracer_exception_found().
PiperOrigin-RevId: 381074242
|