summaryrefslogtreecommitdiffhomepage
path: root/test
AgeCommit message (Collapse)Author
2020-07-01Update preadv2/pwritev2 flag handling in vfs2.Dean Deng
We do not support RWF_SYNC/RWF_DSYNC and probably shouldn't silently accept them, since the user may incorrectly believe that we are synchronizing I/O. Remove the pwritev2 test verifying that we support these flags. gvisor.dev/issue/2601 is the tracking bug for deciding which RWF_.* flags we need and supporting them. Updates #2923, #2601. PiperOrigin-RevId: 319351286
2020-07-01[vfs2][gofer] Fix mmap syscall test.Ayush Ranjan
We were not invalidating mappings when the file size changed in shared mode. Enabled the syscall test for vfs2. Updates #2923 PiperOrigin-RevId: 319346569
2020-07-01Port vfs1 implementation of sync_file_range to vfs2.Dean Deng
Currently, we always perform a full-file sync which could be extremely expensive for some applications. Although vfs1 did not fully support sync_file_range, there were some optimizations that allowed us skip some unnecessary write-outs. Updates #2923, #1897. PiperOrigin-RevId: 319324213
2020-07-01TCP receive should block when in SYN-SENT state.Mithun Iyer
The application can choose to initiate a non-blocking connect and later block on a read, when the endpoint is still in SYN-SENT state. PiperOrigin-RevId: 319311016
2020-07-01Use directory fds in sticky test to avoid permission issues.Dean Deng
After we change credentials, it is possible that we no longer have access to the sticky directory where we are trying to delete files. Use an open fd so this is not an issue. PiperOrigin-RevId: 319306255
2020-07-01Port fallocate to VFS2.Zach Koopmans
PiperOrigin-RevId: 319283715
2020-07-01Add test env variable "fuchsia"Jay Zhuang
... so that Fuchsia gets the same special cases applied to gVisor in tests when this envrionment variable is set. PiperOrigin-RevId: 319239064
2020-07-01Complete async signal delivery support in vfs2.Dean Deng
- Support FIOASYNC, FIO{SET,GET}OWN, SIOC{G,S}PGRP (refactor getting/setting owner in the process). - Unset signal recipient when setting owner with pid == 0 and valid owner type. Updates #2923. PiperOrigin-RevId: 319231420
2020-06-30Fix two bugs in TCP sender.Bhasker Hariharan
a) When GSO is in use we should not cap the segment to maxPayloadSize in sender.maybeSendSegment as the GSO logic will cap the segment to the correct size. Without this the host GSO is not used as we end up breaking up large segments into small MSS sized segments before writing the packets to the host. b) The check to not split a segment due to it not fitting in the receiver window when there are pending segments is incorrect as segments in writeList can be really large as we just take the write call's buffer size and create a single large segment. So a write of say 128KB will just be 1 segment in the writeList. The linux code checks if 1 MSS sized segments fits in the receiver's window and if not then does not split the current segment. gVisor's check was incorrect that it was checking if the whole segment which could be >>> 1 MSS would fit in the receiver's window. This was causing us to prematurely stop sending and falling back to retransmit timer/probe from the other end to send data. This was seen when running HTTPD benchmarks where @ HEAD when sending large files the benchmark was taking forever to run. The tcp_splitseg_mss_test.go is being deleted as the test as written doesn't test what is intended correctly. This is because GSO is enabled by default and the reason the MSS+1 sized segment is sent is because GSO is in use. A proper test will require disabling GSO on linux and netstack which is going to take a bit of work in packetimpact to do it correctly. Separately a new test probably should be written that verifies that a segment > availableWindow is not split if the availableWindow is < 1 MSS. Fixes #3107 PiperOrigin-RevId: 319172089
2020-06-30Remove struct packing to fix compiler warning.Dean Deng
-Waddress-of-packed-member warns on inet_aton() being used with a packed struct member. This was added in cl/291990716. PiperOrigin-RevId: 319111253
2020-06-30Add build target for the provisional style guide.Dean Deng
This includes the provisional style guide in the website and fixes the broken link from CONTRIBUTING.md. The style guide will be located under the "Community" category as it's related to contributing to the project. Also, add missing includes that were causing some presubmits to fail. PiperOrigin-RevId: 319061410
2020-06-29Refactor udp_socket_testZach Koopmans
Bring udp_socket_test into complianc by: - Eliminating IsRunningOnGvisor() invocations. - Wrapping sockets in RAII FileDescriptor objects. - Creating a Bind() method so that the first bind happens on port 0. PiperOrigin-RevId: 318909396
2020-06-27Port GETOWN, SETOWN fcntls to vfs2.Dean Deng
Also make some fixes to vfs1's F_SETOWN. The fcntl test now entirely passes on vfs2. Fixes #2920. PiperOrigin-RevId: 318669529
2020-06-27Support sticky bit in vfs2.Dean Deng
Updates #2923. PiperOrigin-RevId: 318648128
2020-06-26Add tests for eventfd/timerfd/inotify operations that should return ESPIPE.Dean Deng
PiperOrigin-RevId: 318585377
2020-06-26IPv6 raw sockets. Needed for ip6tables.Kevin Krakauer
IPv6 raw sockets never include the IPv6 header. PiperOrigin-RevId: 318582989
2020-06-26Implement SO_NO_CHECK socket option.gVisor bot
SO_NO_CHECK is used to skip the UDP checksum generation on a TX socket (UDP checksum is optional on IPv4). Test: - TestNoChecksum - SoNoCheckOffByDefault (UdpSocketTest) - SoNoCheck (UdpSocketTest) Fixes #3055 PiperOrigin-RevId: 318575215
2020-06-26Packetimpact test for IPv6 unknown options actionZeling Feng
The Option Type identifiers are internally encoded such that their highest-order two bits specify the action that must be taken if the processing IPv6 node does not recognize the Option Type: 00 - skip over this option and continue processing the header. 01 - discard the packet. 10 - discard the packet and, regardless of whether or not the packet's Destination Address was a multicast address, send an ICMP Parameter Problem, Code 2, message to the packet's Source Address, pointing to the unrecognized Option Type. 11 - discard the packet and, only if the packet's Destination Address was not a multicast address, send an ICMP Parameter Problem, Code 2, message to the packet's Source Address, pointing to the unrecognized Option Type. PiperOrigin-RevId: 318566613
2020-06-26Require CAP_SYS_ADMIN in the root user namespace for TTY theftKevin Krakauer
PiperOrigin-RevId: 318563543
2020-06-26Support IPv6 extension headers in packetimpact tests.Zeling Feng
- IPv6 HopByHop Options Extension Header - IPv6 Destination Options Extension Header PiperOrigin-RevId: 318551425
2020-06-26Support inotify IN_ONESHOT.Dean Deng
Also, while we're here, make sure that gofer inotify events are generated when files are created in remote revalidating mode. Updates #1479. PiperOrigin-RevId: 318536354
2020-06-25Test that the fuse device can be openedRidwan Sharif
2020-06-25Moved FUSE device under the fuse directoryRidwan Sharif
2020-06-25Add FUSE character deviceRidwan Sharif
This change adds a FUSE character device backed by devtmpfs. This device will be used to establish a connection between the FUSE server daemon and fusefs. The FileDescriptionImpl methods will be implemented as we flesh out fusefs some more. The tests assert that the device can be opened and used.
2020-06-24Fix procfs bugs in vfs2.Dean Deng
- Support writing on proc/[pid]/{uid,gid}map - Return EIO for writing to static files. Updates #2923. PiperOrigin-RevId: 318188503
2020-06-24Internal change.gVisor bot
PiperOrigin-RevId: 318180382
2020-06-24Port /dev/net/tun device to VFS2.Nicolas Lacasse
Updates #2912 #1035 PiperOrigin-RevId: 318162565
2020-06-23Add support for SO_REUSEADDR to TCP sockets/endpoints.Ian Gudger
For TCP sockets, SO_REUSEADDR relaxes the rules for binding addresses. gVisor/netstack already supported a behavior similar to SO_REUSEADDR, but did not allow disabling it. This change brings the SO_REUSEADDR behavior closer to the behavior implemented by Linux and adds a new SO_REUSEADDR disabled behavior. Like Linux, SO_REUSEADDR is now disabled by default. PiperOrigin-RevId: 317984380
2020-06-23Port /dev/tty device to VFS2.Nicolas Lacasse
Support is limited to the functionality that exists in VFS1. Updates #2923 #1035 PiperOrigin-RevId: 317981417
2020-06-23Complete inotify IN_EXCL_UNLINK implementation in VFS2.Dean Deng
Events were only skipped on parent directories after their children were unlinked; events on the unlinked file itself need to be skipped as well. As a result, all Watches.Notify() calls need to know whether the dentry where the call came from was unlinked. Updates #1479. PiperOrigin-RevId: 317979476
2020-06-23Nit fix: Create and use a std::string object for `const char*`.Ting-Yu Wang
PiperOrigin-RevId: 317973144
2020-06-23Support inotify in vfs2 gofer fs.Dean Deng
Because there is no inode structure stored in the sandbox, inotify watches must be held on the dentry. This would be an issue in the presence of hard links, where multiple dentries would need to share the same set of watches, but in VFS2, we do not support the internal creation of hard links on gofer fs. As a result, we make the assumption that every dentry corresponds to a unique inode. Furthermore, dentries can be cached and then evicted, even if the underlying file has not be deleted. We must prevent this from occurring if there are any watches that would be lost. Note that if the dentry was deleted or invalidated (d.vfsd.IsDead()), we should still destroy it along with its watches. Additionally, when a dentry’s last watch is removed, we cache it if it also has zero references. This way, the dentry can eventually be evicted from memory if it is no longer needed. This is accomplished with a new dentry method, OnZeroWatches(), which is called by Inotify.RmWatch and Inotify.Release. Note that it must be called after all inotify locks are released to avoid violating lock order. Stress tests are added to make sure that inotify operations don't deadlock with gofer.OnZeroWatches. Updates #1479. PiperOrigin-RevId: 317958034
2020-06-23Deflake proc test: Don't fail on DT_UNKNOWN.Ting-Yu Wang
Per manual page: "All applications must properly handle a return of DT_UNKNOWN." PiperOrigin-RevId: 317957013
2020-06-23Port readahead to VFS2.Nicolas Lacasse
It preserves the same functionality (almost none) as in VFS1. Updates #2923 #1035 PiperOrigin-RevId: 317943522
2020-06-23Internal change.gVisor bot
PiperOrigin-RevId: 317941748
2020-06-22Check for invalid trailing / when traversing path in gofer OpenAt.Dean Deng
Updates #2923. PiperOrigin-RevId: 317700049
2020-06-22Allow readdir(/proc/[tid]/net) to return EINVAL on a zombie task.Nicolas Lacasse
Despite what the man page says, linux will return EINVAL when calling getdents() an a /proc/[tid]/net file corresponding to a zombie task. This causes readdir() to return a null pointer AND errno=EINVAL. See fs/proc/proc_net.c:proc_tgid_net_readdir() for where this occurs. We have tests that recursively read /proc, and are likely to hit this when running natively, so we must catch and handle this case. PiperOrigin-RevId: 317674168
2020-06-19Enable passing vfs2 tests.Dean Deng
I forgot to update getdents earlier. Several thousand runs of the fsync and proc_net_unix tests all passed as well. Updates #2923. PiperOrigin-RevId: 317415488
2020-06-19Use internal tmpfs in test runner, even when running with overlay.Nicolas Lacasse
PiperOrigin-RevId: 317377571
2020-06-19Port fadvise64 to vfs2.Dean Deng
Like vfs1, we have a trivial implementation that ignores all valid advice. Updates #2923. PiperOrigin-RevId: 317349505
2020-06-19Fix vfs2 handling of preadv2/pwritev2 flags.Dean Deng
Check for unsupported flags, and silently support RWF_HIPRI by doing nothing. From pkg/abi/linux/file.go: "gVisor does not implement the RWF_HIPRI feature, but the flag is accepted as a valid flag argument for preadv2/pwritev2." Updates #2923. PiperOrigin-RevId: 317330631
2020-06-19Don't adjust parent link count if we replace a child dir with another.Dean Deng
Updates #2923. PiperOrigin-RevId: 317314460
2020-06-19Fix synthetic file bugs in gofer fs.Dean Deng
Always check if a synthetic file already exists at a location before creating a file there, and do not try to delete synthetic gofer files from the remote fs. This fixes runsc_ptrace socket tests that create/unlink synthetic, named socket files. Updates #2923. PiperOrigin-RevId: 317293648
2020-06-18Fix vfs2 tmpfs link permission checks.Dean Deng
Updates #2923. PiperOrigin-RevId: 317246916
2020-06-18Enable more VFS2 syscall testsFabricio Voznika
Updates #2923 PiperOrigin-RevId: 317185798
2020-06-18Remove various uses of 'whitelist'Michael Pratt
Updates #2972 PiperOrigin-RevId: 317113059
2020-06-18Support setsockopt SO_SNDBUF/SO_RCVBUF for raw/udp sockets.Bhasker Hariharan
Updates #173,#6 Fixes #2888 PiperOrigin-RevId: 317087652
2020-06-17Add TempTmpMount testFabricio Voznika
This currently doesn't work with VSF2. Add test to ensure it's not missed. Updates #1487 PiperOrigin-RevId: 317013792
2020-06-17Move mount configutation to RunOptsFabricio Voznika
Separate mount configuration from links and move it to RunOpts, like the other options. PiperOrigin-RevId: 317010158
2020-06-17Add test for stat("/proc/net/snmp").Ian Gudger
PiperOrigin-RevId: 316974863
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 13:15:25 +0000