summaryrefslogtreecommitdiffhomepage
path: root/test
AgeCommit message (Collapse)Author
2020-12-04Initialize has_tid for correctness.Adin Scannell
PiperOrigin-RevId: 345763209
2020-12-04Introduce IPv4 options serializer and add RouterAlert to IGMPBruno Dal Bo
PiperOrigin-RevId: 345701623
2020-12-03Implement command IPC_INFO for semctl.Jing Chen
PiperOrigin-RevId: 345589628
2020-12-03Implement `fcntl` options `F_GETSIG` and `F_SETSIG`.Etienne Perot
These options allow overriding the signal that gets sent to the process when I/O operations are available on the file descriptor, rather than the default `SIGIO` signal. Doing so also populates `siginfo` to contain extra information about which file descriptor caused the event (`si_fd`) and what events happened on it (`si_band`). The logic around which FD is populated within `si_fd` matches Linux's, which means it has some weird edge cases where that value may not actually refer to a file descriptor that is still valid. This CL also ports extra S/R logic regarding async handler in VFS2. Without this, async I/O handlers aren't properly re-registered after S/R. PiperOrigin-RevId: 345436598
2020-12-03Support partitions for other tests.Adin Scannell
PiperOrigin-RevId: 345399936
2020-12-02Abandon reassembly of a packet if fragments overlapArthur Sfez
However, receiving duplicated fragments will not cause reassembly to fail. This is what Linux does too: https://github.com/torvalds/linux/blob/38525c6/net/ipv4/inet_fragment.c#L355 PiperOrigin-RevId: 345309546
2020-12-02Skip generating an empty (broken) test case.Adin Scannell
It's possible that all the cases in a given batch are excluded if the offsets line up just right, which will cause the test to fail. Don't generate an invalid test in this case. PiperOrigin-RevId: 345276588
2020-12-02Fix chown test.Adin Scannell
PiperOrigin-RevId: 345265342
2020-12-02Skip CanKillAllPIDs when running natively.Adin Scannell
This is quite disruptive to run in some environments. PiperOrigin-RevId: 345247206
2020-12-02Add /proc/sys/kernel/sem.Jing Chen
PiperOrigin-RevId: 345178956
2020-12-01Avoid wrong error messagesZeling Feng
Stop showing wrong timeout values in packetimpact test error messages. e.g. "got frames ... want ... during -123ms" PiperOrigin-RevId: 345144938
2020-12-01Typo fix.Etienne Perot
PiperOrigin-RevId: 345062676
2020-11-30Fix deadlock in UDP handleControlPacket path.Bhasker Hariharan
Fixing the sendto deadlock exposed yet another deadlock where a lock inversion occurs on the handleControlPacket path where e.mu and demuxer.epsByNIC.mu are acquired in reverse order from say when RegisterTransportEndpoint is called in endpoint.Connect(). This fix sidesteps the issue by just making endpoint.state an atomic and gets rid of the need to acquire e.mu in e.HandleControlPacket. PiperOrigin-RevId: 344939895
2020-11-30Do not os.Exit() from test/benchmarks/harness.Harness.Init with no args.Jamie Liu
PiperOrigin-RevId: 344896991
2020-11-25Support listener-side MLDv1Ghanan Gowripalan
...as defined by RFC 2710. Querier (router)-side MLDv1 is not yet supported. The core state machine is shared with IGMPv2. This is guarded behind a flag (ipv6.Options.MLDEnabled). Tests: ip_test.TestMGP* Bug #4861 PiperOrigin-RevId: 344344095
2020-11-25[3/3] Support isolated containers for parallel packetimpact testsZeling Feng
To create DUTs in parallel, we need to create goroutines to do the setup. The old code base has a lot of t.Fatal(f) usage in those setup functions which is not great for this change: "FailNow must be called from the goroutine running the test or benchmark function, not from other goroutines created during the test" (https://golang.org/pkg/testing/#T.FailNow). - Cleanup all t.Fatal(f) usage in DUT.Prepare() - use goroutines to create DUTs in parallel PiperOrigin-RevId: 344275809
2020-11-24[2/3] Support isolated containers for parallel packetimpact testsZeling Feng
Added a new flag num_duts to the test runner to create multiple DUTs for the testbench can connect to. PiperOrigin-RevId: 344195435
2020-11-24Report correct pointer value for "bad next header" ICMP errorJulian Elischer
Because the code handles a bad header as "payload" right up to the last moment we need to make sure payload handling does not remove the error information. Fixes #4909 PiperOrigin-RevId: 344141690
2020-11-24Fix a potential indefinite blocking in packetimpact testbenchZeling Feng
1. setsockopt(SO_RCVTIMEO, 0) == never timeout 2. float64(time.Microsecond/time.Second) == 0 3. packetimpact tests use a lot of 1s timeouts This becomes a more significant problem because of a recent change that binds the sniffer only on the specific testNet interface so now the traffic on the ctrlNet cannot wake up the blocking call anymore. PiperOrigin-RevId: 344123465
2020-11-23[1/3] Support isolated containers for parallel packetimpact testsZeling Feng
Summary of the approach: the test runner will set up a few DUTs according to a flag and pass all the test networks to the testbench. The testbench will only reside in a single container. The testbench will put all the test networks into a buffered channel which served as a semaphore and now the user can freely use t.Parallel() in (sub)tests and the true parallelism will be determined by how many DUTs are configured. Creating DUTs on demand is not supported yet, the test author should determine the number of DUTs to be used statically. Specifically in this change: - Don't export any global variables about the test network in testbench. - Sniffer only binds on the local interface because it will be possible to have multiple interfaces to multiple DUTs in a single testbench container. - Migrate existing tests to stop using global variables. PiperOrigin-RevId: 343965962
2020-11-23Fail gracefully if Docker is not configured with ipv6.Adin Scannell
PiperOrigin-RevId: 343927315
2020-11-23Omit sandbox from chown test.Adin Scannell
This test fails because it must include additional UIDs. Omit the bazel sandbox to ensure that it can function correctly. PiperOrigin-RevId: 343927190
2020-11-23Ignore permission failures in CheckDuplicatesRecursively.Adin Scannell
Not all files are always accessible by the process itself. This was specifically seen with map_files, but there's no rule that every entry must be accessible by the process itself. PiperOrigin-RevId: 343919117
2020-11-19Internal change.gVisor bot
PiperOrigin-RevId: 343419851
2020-11-19Propagate IP address prefix from host to netstackFabricio Voznika
Closes #4022 PiperOrigin-RevId: 343378647
2020-11-19Don't hold AddressEndpoints for multicast addressesGhanan Gowripalan
Group addressable endpoints can simply check if it has joined the multicast group without maintaining address endpoints. This also helps remove the dependency on AddressableEndpoint from GroupAddressableEndpoint. Now that group addresses are not tracked with address endpoints, we can avoid accidentally obtaining a route with a multicast local address. PiperOrigin-RevId: 343336912
2020-11-18[netstack] Move SO_KEEPALIVE and SO_ACCEPTCONN option to SocketOptions.Ayush Ranjan
PiperOrigin-RevId: 343217712
2020-11-18[netstack] Move SO_REUSEPORT and SO_REUSEADDR option to SocketOptions.Ayush Ranjan
This changes also introduces: - `SocketOptionsHandler` interface which can be implemented by endpoints to handle endpoint specific behavior on SetSockOpt. This is analogous to what Linux does. - `DefaultSocketOptionsHandler` which is a default implementation of the above. This is embedded in all endpoints so that we don't have to uselessly implement empty functions. Endpoints with specific behavior can override the embedded method by manually defining its own implementation. PiperOrigin-RevId: 343158301
2020-11-18[netstack] Move SO_NO_CHECK option to SocketOptions.Ayush Ranjan
PiperOrigin-RevId: 343146856
2020-11-18Remove the redundant containerIP parameterZeling Feng
PiperOrigin-RevId: 343144023
2020-11-18[netstack] Move SO_PASSCRED option to SocketOptions.Ayush Ranjan
This change also makes the following fixes: - Make SocketOptions use atomic operations instead of having to acquire/drop locks upon each get/set option. - Make documentation more consistent. - Remove tcpip.SocketOptions from socketOpsCommon because it already exists in transport.Endpoint. - Refactors get/set socket options tests to be easily extendable. PiperOrigin-RevId: 343103780
2020-11-17Add support for TTY in multi-containerFabricio Voznika
Fixes #2714 PiperOrigin-RevId: 342950412
2020-11-17Fix possible deadlock in UDP.Write().Bhasker Hariharan
In UDP endpoint.Write() sendUDP is called with e.mu Rlocked. But if this happens to send a datagram over loopback which ends up generating an ICMP response of say ErrNoPortReachable, the handling of the response in HandleControlPacket also acquires e.mu using RLock. This is mostly fine unless there is a competing caller trying to acquire e.mu in exclusive mode using Lock(). This will deadlock as a caller waiting in Lock() disallows an new RLocks() to ensure it can actually acquire the Lock. This is documented here https://golang.org/pkg/sync/#RWMutex. This change releases the endpoint mutex before calling sendUDP to resolve the possibility of the deadlock. Reported-by: syzbot+537989797548c66e8ee3@syzkaller.appspotmail.com Reported-by: syzbot+eb0b73b4ab486f7673ba@syzkaller.appspotmail.com PiperOrigin-RevId: 342894148
2020-11-17Fix SO_ERROR behavior for TCP in gVisor.Bhasker Hariharan
Fixes the behaviour of SO_ERROR for tcp sockets where in linux it returns sk->sk_err and if sk->sk_err is 0 then it returns sk->sk_soft_err. In gVisor TCP we endpoint.HardError is the equivalent of sk->sk_err and endpoint.LastError holds soft errors. This change brings this into alignment with Linux such that both hard/soft errors are cleared when retrieved using getsockopt(.. SO_ERROR) is called on a socket. Fixes #3812 PiperOrigin-RevId: 342868552
2020-11-16Reset watchdog timer between sendfile() iterations.Jamie Liu
As part of this, change Task.interrupted() to not drain Task.interruptChan, and do so explicitly using new function Task.unsetInterrupted() instead. PiperOrigin-RevId: 342768365
2020-11-16Remove ARP address workaroundGhanan Gowripalan
- Make AddressableEndpoint optional for NetworkEndpoint. Not all NetworkEndpoints need to support addressing (e.g. ARP), so AddressableEndpoint should only be implemented for protocols that support addressing such as IPv4 and IPv6. With this change, tcpip.ErrNotSupported will be returned by the stack when attempting to modify addresses on a network endpoint that does not support addressing. Now that packets are fully handled at the network layer, and (with this change) addresses are optional for network endpoints, we no longer need the workaround for ARP where a fake ARP address was added to each NIC that performs ARP so that packets would be delivered to the ARP layer. PiperOrigin-RevId: 342722547
2020-11-16Add packetimpact tests for ICMPv6 Error message for fragmentToshi Kikuchi
Updates #4427 PiperOrigin-RevId: 342703931
2020-11-13Requested Comment/Message wording changesJulian Elischer
PiperOrigin-RevId: 342366891
2020-11-13Disable save/restore in PartialBadBufferTest.SendMsgTCP.Jamie Liu
PiperOrigin-RevId: 342314586
2020-11-12Deflake tcp_socket test.Mithun Iyer
Increase the wait time for the thread to be blocked on read/write syscall. PiperOrigin-RevId: 342204627
2020-11-12Refactor SOL_SOCKET optionsNayana Bidari
Store all the socket level options in a struct and call {Get/Set}SockOpt on this struct. This will avoid implementing socket level options on all endpoints. This CL contains implementing one socket level option for tcp and udp endpoints. PiperOrigin-RevId: 342203981
2020-11-12Change AllocationSize to SizeWithPadding as requestedJulian Elischer
RELNOTES: n/a PiperOrigin-RevId: 342176296
2020-11-11Teach netstack how to add options to IPv4 packetsJulian Elischer
Most packets don't have options but they are an integral part of the standard. Teaching the ipv4 code how to handle them will simplify future testing and use. Because Options are so rare it is worth making sure that the extra work is kept out of the fast path as much as possible. Prior to this change, all usages of the IHL field of the IPv4Fields/Encode system set it to the same constant value except in a couple of tests for bad values. From this change IHL will not be a constant as it will depend on the size of any Options. Since ipv4.Encode() now handles the options it becomes a possible source of errors to let the callers set this value, so remove it entirely and calculate the value from the size of the Options if present (or not) therefore guaranteeing a correct value. Fixes #4709 RELNOTES: n/a PiperOrigin-RevId: 341864765
2020-11-10Add debug logs to startup benchmark.Zach Koopmans
PiperOrigin-RevId: 341757694
2020-11-10Internal changeJamie Liu
PiperOrigin-RevId: 341732791
2020-11-10Add all base and fs tests to Continuous Tests.Zach Koopmans
PiperOrigin-RevId: 341660511
2020-11-09Additions to ICMP and IPv4 parsersJulian Elischer
Teach ICMP.Parser/ToBytes to handle some non echo ICMP packets. Teach IPv4.Parser that fragments only have a payload, not an upper layer. Fix IPv4 and IPv6 reassembly tests to handle the change. Fixes #4758 PiperOrigin-RevId: 341549665
2020-11-09Skip `EventHUp` notify in `FIN_WAIT2` on a socket close.Mithun Iyer
This Notify was added as part of cl/279106406; but notifying `EventHUp` in `FIN_WAIT2` is incorrect, as we want to only notify later on `TIME_WAIT` or a reset. However, we do need to notify any blocked waiters of an activity on the endpoint with `EventIn`|`EventOut`. PiperOrigin-RevId: 341490913
2020-11-09net: connect to the ipv4 localhost returns ENETUNREACH if the address isn't setAndrei Vagin
cl/340002915 modified the code to return EADDRNOTAVAIL if connect is called for a localhost address which isn't set. But actually, Linux returns EADDRNOTAVAIL for ipv6 addresses and ENETUNREACH for ipv4 addresses. Updates #4735 PiperOrigin-RevId: 341479129
2020-11-09parameterize regexp in netdevs.ParseDevicesZeling Feng
PiperOrigin-RevId: 341470647
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 23:50:21 +0000