| Age | Commit message (Collapse) | Author |
|---|
|
PiperOrigin-RevId: 339504677
|
|
PiperOrigin-RevId: 339476515
|
|
#4641 fixed the PHP runtime test ext/standard/tests/network/bug20134.phpt.
We should start testing it again.
Also excluded another flaky test. Seems like a test bug.
PiperOrigin-RevId: 339475716
|
|
PiperOrigin-RevId: 339459247
|
|
This change wakes up any waiters when we receive an ICMP port unreachable
control packet on an UDP socket as well as sets waiter.EventErr in
the result returned by Readiness() when e.lastError is not nil.
The latter is required where an epoll()/poll() is done after the error
is already handled since we will never notify again in such cases.
PiperOrigin-RevId: 339370469
|
|
This PR implements /proc/[pid]/mem for `pkg/sentry/fs` (refer to #2716) and `pkg/sentry/fsimpl`.
@majek
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/4060 from lnsp:proc-pid-mem 2caf9021254646f441be618a9bb5528610e44d43
PiperOrigin-RevId: 339369629
|
|
Updates #3921
PiperOrigin-RevId: 339195417
|
|
PiperOrigin-RevId: 339166854
|
|
Control messages collected when peeking into a socket were being leaked.
PiperOrigin-RevId: 339114961
|
|
PiperOrigin-RevId: 338805321
|
|
Inode number consistency checks are now skipped in save/restore tests for
reasons described in greatest detail in StatTest.StateDoesntChangeAfterRename.
They pass in VFS1 due to the bug described in new test case
SimpleStatTest.DifferentFilesHaveDifferentDeviceInodeNumberPairs.
Fixes #1663
PiperOrigin-RevId: 338776148
|
|
Handle "Resource temporarily unavailable" EAGAIN errors with a select
call before calling recvmsg.
Also rename similar helper call from "RecvMsgTimeout" to "RecvTimeout",
because it calls "recv".
PiperOrigin-RevId: 338761695
|
|
This caused test flakes.
PiperOrigin-RevId: 338758723
|
|
Also updated a test which only fails with VFS1.
PiperOrigin-RevId: 338704940
|
|
The SO_ACCEPTCONN option is used only on getsockopt(). When this option is
specified, getsockopt() indicates whether socket listening is enabled for
the socket. A value of zero indicates that socket listening is disabled;
non-zero that it is enabled.
PiperOrigin-RevId: 338703206
|
|
Earlier the count was dropped only after calling e.deliverAccepted. This lead to
an issue where there were no connections in SYN-RCVD state for the listening
endpoint but e.synRcvdCount would not be zero because it was being reduced only
when handleSynSegment returned after deliverAccepted returned.
This issue is seen when the Nth SYN for a listen backlog of size N which would
cause the listen backlog to be full gets dropped occasionally. This happens when
the new SYN comes at when the previous completed endpoint has been delivered to
the accept queue but the synRcvdCount hasn't yet been decremented because the
goroutine running handleSynSegment has not yet completed.
PiperOrigin-RevId: 338690646
|
|
Our current reference leak checker uses finalizers to verify whether an object
has reached zero references before it is garbage collected. There are multiple
problems with this mechanism, so a rewrite is in order.
With finalizers, there is no way to guarantee that a finalizer will run before
the program exits. When an unreachable object with a finalizer is garbage
collected, its finalizer will be added to a queue and run asynchronously. The
best we can do is run garbage collection upon sandbox exit to make sure that
all finalizers are enqueued.
Furthermore, if there is a chain of finalized objects, e.g. A points to B
points to C, garbage collection needs to run multiple times before all of the
finalizers are enqueued. The first GC run will register the finalizer for A but
not free it. It takes another GC run to free A, at which point B's finalizer
can be registered. As a result, we need to run GC as many times as the length
of the longest such chain to have a somewhat reliable leak checker.
Finally, a cyclical chain of structs pointing to one another will never be
garbage collected if a finalizer is set. This is a well-known issue with Go
finalizers (https://github.com/golang/go/issues/7358). Using leak checking on
filesystem objects that produce cycles will not work and even result in memory
leaks.
The new leak checker stores reference counted objects in a global map when
leak check is enabled and removes them once they are destroyed. At sandbox
exit, any remaining objects in the map are considered as leaked. This provides
a deterministic way of detecting leaks without relying on the complexities of
finalizers and garbage collection.
This approach has several benefits over the former, including:
- Always detects leaks of objects that should be destroyed very close to
sandbox exit. The old checker very rarely detected these leaks, because it
relied on garbage collection to be run in a short window of time.
- Panics if we forgot to enable leak check on a ref-counted object (we will try
to remove it from the map when it is destroyed, but it will never have been
added).
- Can store extra logging information in the map values without adding to the
size of the ref count struct itself. With the size of just an int64, the ref
count object remains compact, meaning frequent operations like IncRef/DecRef
are more cache-efficient.
- Can aggregate leak results in a single report after the sandbox exits.
Instead of having warnings littered in the log, which were
non-deterministically triggered by garbage collection, we can print all
warning messages at once. Note that this could also be a limitation--the
sandbox must exit properly for leaks to be detected.
Some basic benchmarking indicates that this change does not significantly
affect performance when leak checking is enabled, which is understandable
since registering/unregistering is only done once for each filesystem object.
Updates #1486.
PiperOrigin-RevId: 338685972
|
|
Previously a link endpoint was passed to
stack.LinkAddressResolver.LinkAddressRequest. With this change,
implementations that want a route for the link address request may
find one through the stack. Other implementations that want to send
a packet without a route may continue to do so using the network
interface directly.
Test: - arp_test.TestLinkAddressRequest
- ipv6.TestLinkAddressRequest
PiperOrigin-RevId: 338577474
|
|
Currently, this Fault() function does not work properly on the arm platform.
After modification, sigaltstack_test_runsc_kvm can be passed on
Arm64.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
The python:test_subprocess enumerates all possible file descriptors and fails
by timeout if the limit is too high.
There is a know thing about docker that it sets this limit to 1M by default,
but on native linux, this limit will be between 1K to 32K.
PiperOrigin-RevId: 338197239
|
|
bhaskerh@ fixed a bunch of the EADDRINUSE flakes in #3662 so we should
unexclude them.
I have also tested other flaky tests on this list and removed those that do
not flake anymore.
PiperOrigin-RevId: 338158545
|
|
PiperOrigin-RevId: 337971497
|
|
- Check the sticky bit in overlay.filesystem.UnlinkAt(). Fixes
StickyTest.StickyBitPermDenied.
- When configuring a VFS2 overlay in runsc, copy the lower layer's root
owner/group/mode to the upper layer's root (as in the VFS1 equivalent,
boot.addOverlay()). This makes the overlay root owned by UID/GID 65534 with
mode 0755 rather than owned by UID/GID 0 with mode 01777. Fixes
CreateTest.CreateFailsOnUnpermittedDir, which assumes that the test cannot
create files in /.
- MknodTest.UnimplementedTypesReturnError assumes that the creation of device
special files is not supported. However, while the VFS2 gofer client still
doesn't support device special files, VFS2 tmpfs does, and in the overlay
test dimension mknod() targets a tmpfs upper layer. The test initially has
all capabilities, including CAP_MKNOD, so its creation of these files
succeeds. Constrain these tests to VFS1.
- Rename overlay.nonDirectoryFD to overlay.regularFileFD and only use it for
regular files, using the original FD for pipes and device special files. This
is more consistent with Linux (which gets the original inode_operations, and
therefore file_operations, for these file types from ovl_fill_inode() =>
init_special_inode()) and fixes remaining mknod and pipe tests.
- Read/write 1KB at a time in PipeTest.Streaming, rather than 4 bytes. This
isn't strictly necessary, but it makes the test less obnoxiously slow on
ptrace.
Fixes #4407
PiperOrigin-RevId: 337971042
|
|
ualarm(2) is obsolete. Move IntervalTimer into a test util, where it can be
used by flock tests.
These tests were flaky with TSAN, probably because it slowed the tests down
enough that the alarm was expiring before flock() was called. Use an interval
timer so that even if we miss the first alarm (or more), flock() is still
guaranteed to be interrupted.
PiperOrigin-RevId: 337578751
|
|
Reported-by: syzbot+5466463b7604c2902875@syzkaller.appspotmail.com
PiperOrigin-RevId: 337451896
|
|
By exposing an ALL_TESTS list in defs.bzl we can make sure all packetimpact
users get to agree on the list of all tests. A defect in this approach is that
we have to keep a list of packetimpact_testbench rules in the BUILD file. An
helper validate_all_tests has been added to help keep BUILD and .bzl files in
sync.
PiperOrigin-RevId: 337411839
|
|
Currently strace+debug is always enabled as the setting from
the upper layer isn't passed to _syscall_test(). And it will
negatively affect the performance tests. This patch fixes this
issue.
The "debug" argument of _syscall_test() is also made mandatory
to prevent this happening again.
//test/perf:getpid_benchmark_runsc_kvm
-----------------------------------------------------
Benchmark Time CPU Iterations
-----------------------------------------------------
Before:
BM_Getpid 28119 ns 28157 ns 25926
After:
BM_Getpid 947 ns 939 ns 777778
Fixes #4509
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
|
|
Tests are written in C++ and there is no reason to run them with gotsan without
gVisor.
PiperOrigin-RevId: 336783276
|
|
The fix in commit 028e045da93b7c1c26417e80e4b4e388b86a713d was incorrect as
it can cause the right edge of the window to shrink when we announce
a zero window due to receive buffer being full as its done before the check
for seeing if the window is being shrunk because of the selected window.
Further the window was calculated purely on available space but in cases where
we are getting full sized segments it makes more sense to use the actual bytes
being held. This CL changes to use the lower of the total available space vs
the available space in the maximal window we could advertise minus the actual
payload bytes being held.
This change also cleans up the code so that the window selection logic is
not duplicated between getSendParams() and windowCrossedACKThresholdLocked.
PiperOrigin-RevId: 336404827
|
|
PiperOrigin-RevId: 336393190
|
|
Add parser and formatting for golang benchmarks for docker benchmarks.
Change adds a library for printing and parsing Test parameters and metrics.
Benchmarks use the library to print parameters in the Benchmark title
(e.g. the name field in b.Run()), and to report CustomMetrics. Parser
uses the library to parse printed data from benchmark output and
put it into BigQuery structs.
PiperOrigin-RevId: 336365628
|
|
PiperOrigin-RevId: 336350318
|
|
test/syscalls/linux/iptables.cc:130:3:
error: C99 designator 'name' outside aggregate initializer
130 | };
|
PiperOrigin-RevId: 336331738
|
|
This change also adds support to go_stateify for detecting an appropriate
receiver name, avoiding a large number of false positives.
PiperOrigin-RevId: 335994587
|
|
PiperOrigin-RevId: 335927821
|
|
Most of the IPv4 fragmentation code was moved in the fragmentation
package and it is reused by IPv6 fragmentation.
Test:
- pkg/tcpip/network/ipv4:ipv4_test
- pkg/tcpip/network/ipv6:ipv6_test
- pkg/tcpip/network/fragmentation:fragmentation_test
Fixes #4389
PiperOrigin-RevId: 335714280
|
|
Updates #267
PiperOrigin-RevId: 335713923
|
|
Updates #1487
PiperOrigin-RevId: 335516732
|
|
PiperOrigin-RevId: 335516625
|
|
PiperOrigin-RevId: 335429072
|
|
- When the KCOV_ENABLE_TRACE ioctl is called with the trace kind KCOV_TRACE_PC,
the kcov mode should be set to KCOV_*MODE*_TRACE_PC.
- When the owning task of kcov exits, the memory mapping should not be cleared
so it can be used by other tasks.
- Add more tests (also tested on native Linux kcov).
PiperOrigin-RevId: 335202585
|
|
PiperOrigin-RevId: 335070320
|
|
PiperOrigin-RevId: 334716351
|
|
Adds support for the IPv6-compatible redirect target. Redirection is a limited
form of DNAT, where the destination is always the localhost.
Updates #3549.
PiperOrigin-RevId: 334698344
|
|
There is a new random issue on some Arm64 machines.
This scene can be summarized as following:
Sometimes, the content of the func() pointer is still 0 opcode.
The probability of this kind of issue is very low,
currently only available on some machines.
After inserting a simple memory barrier, this issue was gone.
The code to directly use the memory barrier is as follows:
memcpy(reinterpret_cast<void*>(addr), machine_code, sizeof(machine_code));
isb()
func = reinterpret_cast<uint32_t (*)(void)>(addr);
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
Closes #3374
PiperOrigin-RevId: 334505627
|
|
PiperOrigin-RevId: 334478850
|
|
Like matchers, targets should use a module-like register/lookup system. This
replaces the brittle switch statements we had before.
The only behavior change is supporing IPT_GET_REVISION_TARGET. This makes it
much easier to add IPv6 redirect in the next change.
Updates #3549.
PiperOrigin-RevId: 334469418
|
|
PiperOrigin-RevId: 334419854
|
|
When the socket is set with SO_LINGER and close()'d in the initial state, it
should not linger and return immediately.
PiperOrigin-RevId: 334263149
|
