Age | Commit message (Collapse) | Author |
|
Contrary to the comment on the socket test, the failure was due to an issue
with goferfs rather than kernfs.
PiperOrigin-RevId: 353918021
|
|
This also causes inotify events to be generated when reading files for exec.
This change also requires us to adjust splice+inotify tests due to
discrepancies between gVisor and Linux behavior. Note that these discrepancies
existed before; we just did not exercise them previously. See comment for more
details.
Fixes #5348.
PiperOrigin-RevId: 353907187
|
|
If data is sent over a stream socket that will not fit all at once, it will
be sent over multiple packets. SCM Rights should only be sent with the first
packet (see net/unix/af_unix.c:unix_stream_sendmsg in Linux).
Reported-by: syzbot+aa26482e9c4887aff259@syzkaller.appspotmail.com
PiperOrigin-RevId: 353886442
|
|
This CL moves {S,G}etsockopt of SO_SNDBUF from all endpoints to socketops. For
unix sockets, we do not support setting of this option.
PiperOrigin-RevId: 353871484
|
|
IN_CLOSE should only be generated when a file description loses its last
reference; not when a file descriptor is closed.
See fs/file_table.c:__fput.
Updates #5348.
PiperOrigin-RevId: 353810697
|
|
Individual test cases must not rely on being executed in a clean environment.
PiperOrigin-RevId: 353684155
|
|
The test was execve itself into `/bin/true`, so the test was
not actually executing.
PiperOrigin-RevId: 353676855
|
|
Fixes #5113.
PiperOrigin-RevId: 353313374
|
|
For an active OPEN call with unspecified foreign socket, TCP MUST
return error: foreign socket unspecified
PiperOrigin-RevId: 352961691
|
|
PiperOrigin-RevId: 352905565
|
|
On ARM64, when ptrace stops on a system call, it uses the x7 register to
indicate whether the stop has been signalled from syscall entry or syscall
exit. This means that we can't get a value of this register and we can't change
it. More details are in the comment for tracehook_report_syscall in
arch/arm64/kernel/ptrace.c.
This happens only if we stop on a system call, so let's queue a signal, resume
a stub thread and catch it on a signal handling.
Fixes: #5238
PiperOrigin-RevId: 352668695
|
|
IPv4 previously accepts the packet, while IPv6 panics. Neither is the behavior
in Linux.
splice() in Linux has different behavior than in gVisor. This change documents
it in the SpliceTooLong test.
Reported-by: syzbot+b550e78e5c24d1d521f2@syzkaller.appspotmail.com
PiperOrigin-RevId: 352091286
|
|
PiperOrigin-RevId: 352068182
|
|
io.Writer.Write requires err to be non-nil if n < len(v).
We could allow this but it will be irreversible if users depend on this
behavior.
Ported the test that discovered this.
PiperOrigin-RevId: 352065946
|
|
Also fix test expectation for UDP sendto() case in tuntap syscall test.
Fixes #5155
PiperOrigin-RevId: 352056612
|
|
- Remove the pipe package's dependence on the buffer package, which becomes
unused as a result. The buffer package is currently intended to serve two use
cases, pipes and temporary buffers, and does neither optimally as a result;
this change facilitates retooling the buffer package to better serve the
latter.
- Pass callbacks taking safemem.BlockSeq to the internal pipe I/O methods,
which makes most callbacks trivial.
- Fix VFS1's splice() and tee() to immediately return if a pipe returns a
partial write.
PiperOrigin-RevId: 351911375
|
|
Return EEXIST when overwritting a file as long as the caller has exec
permission on the parent directory, even if the caller doesn't have
write permission.
Also reordered the mount write check, which happens before permission
is checked.
Closes #5164
PiperOrigin-RevId: 351868123
|
|
This change implements TLP details enumerated in
https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.5.1.
Fixes #5083
PiperOrigin-RevId: 351467357
|
|
These are primarily simplification and lint mistakes. However, minor
fixes are also included and tests added where appropriate.
PiperOrigin-RevId: 351425971
|
|
PiperOrigin-RevId: 350646249
|
|
Read now takes a destination io.Writer, count, options. Keeping the method name
Read, in contrast to the Write method.
This enables:
* direct transfer of views under VV
* zero copy
It also eliminates the need for sentry to keep a slice of view because
userspace had requested a read that is smaller than the view returned, removing
the complexity there.
Read/Peek/ReadPacket are now consolidated together and some duplicate code is
removed.
PiperOrigin-RevId: 350636322
|
|
PiperOrigin-RevId: 350438564
|
|
IPv4 was always supported but UDP never supported joining/leaving IPv6
multicast groups via socket options.
Add: IPPROTO_IPV6, IPV6_JOIN_GROUP/IPV6_ADD_MEMBERSHIP
Remove: IPPROTO_IPV6, IPV6_LEAVE_GROUP/IPV6_DROP_MEMBERSHIP
Test: integration_test.TestUDPAddRemoveMembershipSocketOption
PiperOrigin-RevId: 350396072
|
|
PiperOrigin-RevId: 350246333
|
|
Reported-by: syzbot+814105309d2ae8651084@syzkaller.appspotmail.com
PiperOrigin-RevId: 350159452
|
|
PiperOrigin-RevId: 349607959
|
|
PiperOrigin-RevId: 349490873
|
|
PiperOrigin-RevId: 349458984
|
|
PiperOrigin-RevId: 349314945
|
|
The buildkite syscall tests start with a lot of C++ warnings. This
cleans that up a little.
|
|
open() has to return ENXIO in this case.
O_PATH isn't supported by vfs1.
PiperOrigin-RevId: 348820478
|
|
PiperOrigin-RevId: 348720223
|
|
PiperOrigin-RevId: 348056159
|
|
PiperOrigin-RevId: 348055514
|
|
PiperOrigin-RevId: 347711998
|
|
PiperOrigin-RevId: 347650354
|
|
There are surprisingly few syscall tests that run with hostinet. For example
running the following command only returns two results:
`bazel query test/syscalls:all | grep hostnet`
I think as a result, as our control messages evolved, hostinet was left
behind. Update it to support all control messages netstack supports.
This change also updates sentry's control message parsing logic to make it up to
date with all the control messages we support.
PiperOrigin-RevId: 347508892
|
|
SO_OOBINLINE option is set/get as boolean value, which is the same as linux.
As we currently do not support disabling this option, we always return it as
true.
PiperOrigin-RevId: 347413905
|
|
We do not rely on error for getsockopt options(which have boolean values)
anymore. This will cause issue in sendmsg where we used to return error
for IPV6_V6Only option. Fix the panic by returning error (for sockets other
than TCP and UDP) if the address does not match the type(AF_INET/AF_INET6) of
the socket.
PiperOrigin-RevId: 347063838
|
|
PiperOrigin-RevId: 346973338
|
|
Fixes #5004
PiperOrigin-RevId: 346643745
|
|
PiperOrigin-RevId: 345976554
|
|
The next test case is perfectly valid, which creates a test directory
with appropriate permissions and ensures that you can't create a file.
This test case assumes that the root directory has certain permissions.
In this case, we may have EROFS instead of a permission error, but it's
perfectly plausible that no error occurs at all. The test is not valid.
PiperOrigin-RevId: 345764412
|
|
PiperOrigin-RevId: 345763209
|
|
PiperOrigin-RevId: 345589628
|
|
These options allow overriding the signal that gets sent to the process when
I/O operations are available on the file descriptor, rather than the default
`SIGIO` signal. Doing so also populates `siginfo` to contain extra information
about which file descriptor caused the event (`si_fd`) and what events happened
on it (`si_band`). The logic around which FD is populated within `si_fd`
matches Linux's, which means it has some weird edge cases where that value may
not actually refer to a file descriptor that is still valid.
This CL also ports extra S/R logic regarding async handler in VFS2.
Without this, async I/O handlers aren't properly re-registered after S/R.
PiperOrigin-RevId: 345436598
|
|
PiperOrigin-RevId: 345399936
|
|
PiperOrigin-RevId: 345265342
|
|
This is quite disruptive to run in some environments.
PiperOrigin-RevId: 345247206
|
|
PiperOrigin-RevId: 345178956
|