Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 368749894
|
|
We do not currently run random save tests.
PiperOrigin-RevId: 368309921
|
|
Fix a race where the ACK completing the handshake can be dropped by
a closing listener without RST to the peer. The listener close would
reset the accepted queue and that causes the connecting endpoint
in SYNRCVD state to drop the ACK thinking the queue if filled up.
PiperOrigin-RevId: 368165509
|
|
It's a common pattern in test code to reinterpret_cast<sockaddr*> from
sockaddr_* structs. Make AsSockAddr() for them so code looks better.
Note: Why not a wrapper type for `sockaddr_storage` and etc?
It's also a common need to have a local in-out variable of socklen_t.
Creating a wrapper type may however lead to this wrong code:
Wrapper addr;
socklen_t addrlen = sizeof(addr);
where sizeof(Wrapper) may not equal to sizeof(sockaddr_storage).
PiperOrigin-RevId: 368126229
|
|
PiperOrigin-RevId: 367730917
|
|
Move maxListenBacklog check to the caller of endpoint Listen so that it
is applicable to Unix domain sockets as well.
This was changed in cl/366935921.
Reported-by: syzbot+a35ae7cdfdde0c41cf7a@syzkaller.appspotmail.com
PiperOrigin-RevId: 367728052
|
|
- Change the accept queue full condition for a listening endpoint
to only honor completed (and delivered) connections.
- Use syncookies if the number of incomplete connections is beyond
listen backlog. This also cleans up the SynThreshold option code
as that is no longer used with this change.
- Added a new stack option to unconditionally generate syncookies.
Similar to sysctl -w net.ipv4.tcp_syncookies=2 on Linux.
- Enable keeping of incomplete connections beyond listen backlog.
- Drop incoming SYNs only if the accept queue is filled up.
- Drop incoming ACKs that complete handshakes when accept queue is full
- Enable the stack to accept one more connection than programmed by
listen backlog.
- Handle backlog argument being zero, negative for listen, as Linux.
- Add syscall and packetimpact tests to reflect the changes above.
- Remove TCPConnectBacklog test which is polling for completed
connections on the client side which is not reflective of whether
the accept queue is filled up by the test. The modified syscall test
in this CL addresses testing of connecting sockets.
Fixes #3153
PiperOrigin-RevId: 366935921
|
|
PiperOrigin-RevId: 366923274
|
|
PiperOrigin-RevId: 366907152
|
|
There's no reason to actually increment the semaphore, it just introduces the
chance of a race.
PiperOrigin-RevId: 366851795
|
|
Allow user mounting a verity fs on an existing mount by specifying mount
flags root_hash and lower_path.
PiperOrigin-RevId: 366843846
|
|
PiperOrigin-RevId: 366573366
|
|
A skeleton implementation of cgroupfs. It supports trivial cpu and
memory controllers with no support for hierarchies.
PiperOrigin-RevId: 366561126
|
|
PiperOrigin-RevId: 366344222
|
|
PiperOrigin-RevId: 366292533
|
|
PiperOrigin-RevId: 365092320
|
|
On Linux these are meant to be equivalent to POLLIN/POLLOUT. Rather
than hack these on in sys_poll etc it felt cleaner to just cleanup
the call sites to notify for both events. This is what linux does
as well.
Fixes #5544
PiperOrigin-RevId: 364859977
|
|
Also adds support for clearing the setuid bit when appropriate (writing,
truncating, changing size, changing UID, or changing GID).
VFS2 only.
PiperOrigin-RevId: 364661835
|
|
syserror allows packages to register translators for errors. These
translators should be called prior to checking if the error is valid,
otherwise it may not account for possible errors that can be returned
from different packages, e.g. safecopy.BusError => syserror.EFAULT.
Second attempt, it passes tests now :-)
PiperOrigin-RevId: 363714508
|
|
There is a race in handling new incoming connections on a listening
endpoint that causes the endpoint to reply to more incoming SYNs than
what is permitted by the listen backlog.
The race occurs when there is a successful passive connection handshake
and the synRcvdCount counter is decremented, followed by the endpoint
delivered to the accept queue. In the window of time between
synRcvdCount decrementing and the endpoint being enqueued for accept,
new incoming SYNs can be handled without honoring the listen backlog
value, as the backlog could be perceived not full.
Fixes #5637
PiperOrigin-RevId: 363279372
|
|
PiperOrigin-RevId: 363276495
|
|
Terminating tasks from other tests can mess up with the task
list of the current test. Tests were changed to look for added/removed
tasks, ignoring other tasks that may exist while the test is running.
PiperOrigin-RevId: 363084261
|
|
With /proc/sys/net/ipv4/ip_local_port_range implemented, the socket stress
test runs in a more normal time and doesn't need to sacrifice coverage to
prevent timeouts.
PiperOrigin-RevId: 362443366
|
|
Kernels after 3b830a9c return EAGAIN in this case.
PiperOrigin-RevId: 361936327
|
|
Speeds up the socket stress tests by a couple orders of magnitude.
PiperOrigin-RevId: 361721050
|
|
Thread from earlier test can show up in `/proc/self/tasks` while the
thread tears down. Account for that when searching for procs for the
first time in the test.
PiperOrigin-RevId: 361689673
|
|
Remove part of test that was making it flaky. It runs for native only,
so not really important since it's not testing gVisor.
Before: http://sponge2/37557c41-298e-408d-9b54-50ba3d41e22f
After: http://sponge2/7bca72be-cb9b-42f8-8c54-af4956c39455
PiperOrigin-RevId: 361611512
|
|
io.Reader.ReadFull returns the number of bytes copied and an error if fewer
bytes were read.
PiperOrigin-RevId: 360247614
|
|
PiperOrigin-RevId: 359591577
|
|
One precondition of VFS.PrepareRenameAt is that the `from` and `to` dentries
are not the same. Kernfs was not checking this, which could lead to a deadlock.
PiperOrigin-RevId: 359385974
|
|
Restrict ptrace(2) according to the default configurations of the YAMA security
module (mode 1), which is a common default among various Linux distributions.
The new access checks only permit the tracer to proceed if one of the following
conditions is met:
a) The tracer is already attached to the tracee.
b) The target is a descendant of the tracer.
c) The target has explicitly given permission to the tracer through the
PR_SET_PTRACER prctl.
d) The tracer has CAP_SYS_PTRACE.
See security/yama/yama_lsm.c for more details.
Note that these checks are added to CanTrace, which is checked for
PTRACE_ATTACH as well as some other operations, e.g., checking a process'
memory layout through /proc/[pid]/mem.
Since this patch adds restrictions to ptrace, it may break compatibility for
applications run by non-root users that, for instance, rely on being able to
trace processes that are not descended from the tracer (e.g., `gdb -p`). YAMA
restrictions can be turned off by setting /proc/sys/kernel/yama/ptrace_scope
to 0, or exceptions can be made on a per-process basis with the PR_SET_PTRACER
prctl.
Reported-by: syzbot+622822d8bca08c99e8c8@syzkaller.appspotmail.com
PiperOrigin-RevId: 359237723
|
|
Reported-by: syzbot+f2489ba0b999a45d1ad1@syzkaller.appspotmail.com
PiperOrigin-RevId: 358866218
|
|
Also skips a test if the setsockopt to increase send buffer did not result in an
increase. This is possible when the underlying socket is a host backed unix
domain socket as in such cases gVisor does not permit increasing SO_SNDBUF.
PiperOrigin-RevId: 358285158
|
|
Individual test cases must not rely on being executed in a clean environment.
PiperOrigin-RevId: 358207468
|
|
PiperOrigin-RevId: 357224877
|
|
PiperOrigin-RevId: 357031904
|
|
PiperOrigin-RevId: 357015186
|
|
PiperOrigin-RevId: 356868412
|
|
The limits for snd/rcv buffers for unix domain socket is controlled by the
following sysctls on linux
- net.core.rmem_default
- net.core.rmem_max
- net.core.wmem_default
- net.core.wmem_max
Today in gVisor we do not expose these sysctls but we do support setting the
equivalent in netstack via stack.Options() method. But AF_UNIX sockets in gVisor
can be used without netstack, with hostinet or even without any networking stack
at all. Which means ideally these sysctls need to live as globals in gVisor.
But rather than make this a big change for now we hardcode the limits in the
AF_UNIX implementation itself (which in itself is better than where we were
before) where it SO_SNDBUF was hardcoded to 16KiB. Further we bump the initial
limit to a default value of 208 KiB to match linux from the paltry 16 KiB we use
today.
Updates #5132
PiperOrigin-RevId: 356665498
|
|
PiperOrigin-RevId: 356587965
|
|
Reported-by: syzbot+9ffc71246fe72c73fc25@syzkaller.appspotmail.com
PiperOrigin-RevId: 356536113
|
|
PiperOrigin-RevId: 356450303
|
|
We previously return EINVAL when connecting to port 0, however this is not the
observed behavior on Linux. One of the observable effects after connecting to
port 0 on Linux is that getpeername() will fail with ENOTCONN.
PiperOrigin-RevId: 356413451
|
|
Reported-by: syzbot+d54bc27a15aefe52c330@syzkaller.appspotmail.com
PiperOrigin-RevId: 356406975
|
|
According to vfs.FilesystemImpl.RenameAt documentation:
- If the last path component in rp is "." or "..", and opts.Flags contains
RENAME_NOREPLACE, RenameAt returns EEXIST.
- If the last path component in rp is "." or "..", and opts.Flags does not
contain RENAME_NOREPLACE, RenameAt returns EBUSY.
Reported-by: syzbot+6189786e64fe13fe43f8@syzkaller.appspotmail.com
PiperOrigin-RevId: 355959266
|
|
PiperOrigin-RevId: 355506299
|
|
Netstack today will send dupACK's with no rate limit for incoming out of
window segments. This can result in ACK loops for example if a TCP socket
connects to itself (actually permitted by TCP). Where the ACK sent in
response to packets being out of order itself gets considered as an out
of window segment resulting in another ACK being generated.
PiperOrigin-RevId: 355206877
|
|
Also sync syscall test expectations on Fuchisa.
PiperOrigin-RevId: 355163492
|
|
Individual test cases must not rely on being executed in a clean environment.
PiperOrigin-RevId: 354730126
|
|
PiperOrigin-RevId: 354615220
|