summaryrefslogtreecommitdiffhomepage
path: root/test/syscalls/linux
AgeCommit message (Collapse)Author
2020-02-24Merge pull request #1886 from avagin:arm64-travis-cigVisor bot
PiperOrigin-RevId: 296975376
2020-02-21arm64: add a travis build ciAndrei Vagin
Build runsc and run "runsc do ls". Signed-off-by: Andrei Vagin <avagin@gmail.com>
2020-02-21Implement tap/tun device in vfs.Ting-Yu Wang
PiperOrigin-RevId: 296526279
2020-02-20Initial network namespace support.gVisor bot
TCP/IP will work with netstack networking. hostinet doesn't work, and sockets will have the same behavior as it is now. Before the userspace is able to create device, the default loopback device can be used to test. /proc/net and /sys/net will still be connected to the root network stack; this is the same behavior now. Issue #1833 PiperOrigin-RevId: 296309389
2020-02-19Add basic microbenchmarks.Adin Scannell
PiperOrigin-RevId: 296104390
2020-02-19Include more test files in exports_filesgVisor bot
So that they can be included by Fuchsia's syscall tests PiperOrigin-RevId: 296030383
2020-02-18Enable IPV6_RECVTCLASS socket option for datagram socketsgVisor bot
Added the ability to get/set the IP_RECVTCLASS socket option on UDP endpoints. If enabled, traffic class from the incoming Network Header passed as ancillary data in the ControlMessages. Adding Get/SetSockOptBool to decrease the overhead of getting/setting simple options. (This was absorbed in a CL that will be landing before this one). Test: * Added unit test to udp_test.go that tests getting/setting as well as verifying that we receive expected TOS from incoming packet. * Added a syscall test for verifying getting/setting * Removed test skip for existing syscall test to enable end to end test. PiperOrigin-RevId: 295840218
2020-02-18Deflake fallocate syscall test.gVisor bot
- Retry if fallocate returns EINTR. - If fallocate fails, don't try to fstat and confirm the result. PiperOrigin-RevId: 295789790
2020-02-13Internal change.gVisor bot
PiperOrigin-RevId: 294952610
2020-02-12Include more test files in exports_filesgVisor bot
So that they can be included by Fuchsia's syscall tests PiperOrigin-RevId: 294654890
2020-02-10Internal change.Zach Koopmans
PiperOrigin-RevId: 294250370
2020-02-07Support listxattr and removexattr syscalls.Dean Deng
Note that these are only implemented for tmpfs, and other impls will still return EOPNOTSUPP. PiperOrigin-RevId: 293899385
2020-02-07Refactor syscall testsJay Zhuang
- Move shared helpers V4Multicast and V4Broadcast to socket_test_util - Add unnamed namespace so socket_ipv4_tcp_unbound_external_networking_test.cc and socket_ipv4_udp_unbound_external_networking_test.cc can be compiled together - Add test files to "exports_files" so they can be included by Fuchsia's syscall test setup PiperOrigin-RevId: 293880429
2020-02-06Fix test case on AMD.Adin Scannell
When ignored, the trap should be executed which generates a SIGSEGV as in the above case. PiperOrigin-RevId: 293618489
2020-02-05Add notes to relevant tests.Adin Scannell
These were out-of-band notes that can help provide additional context and simplify automated imports. PiperOrigin-RevId: 293525915
2020-02-05recv() on a closed TCP socket returns ENOTCONNEyal Soha
From RFC 793 s3.9 p58 Event Processing: If RECEIVE Call arrives in CLOSED state and the user has access to such a connection, the return should be "error: connection does not exist" Fixes #1598 PiperOrigin-RevId: 293494287
2020-02-05Disable get/set xattrs until list/remove exist too.Nicolas Lacasse
PiperOrigin-RevId: 293411655
2020-02-04Support RTM_NEWADDR and RTM_GETLINK in (rt)netlink.Ting-Yu Wang
PiperOrigin-RevId: 293271055
2020-02-04Add socket connection stress test.Ian Gudger
Tests 65k connection attempts on common types of sockets to check for port leaks. Also fixes a bug where dual-stack sockets wouldn't properly re-queue segments received while closing. PiperOrigin-RevId: 293241166
2020-02-04timer_create(2) should return 0 on successMichael Pratt
The timer ID is copied out to the argument. Fixes #1738 PiperOrigin-RevId: 293210801
2020-02-04Include socket_ip_udp_loopback.cc in exportes_filesJay Zhuang
So it can be included in fuchsia's syscall tests PiperOrigin-RevId: 293208306
2020-02-03Reduce run time for //test/syscalls:socket_inet_loopback_test_runsc_ptrace.Ting-Yu Wang
* Tests are picked for a shard differently. It now picks one test from each block, instead of picking the whole block. This makes the same kind of tests spreads across different shards. * Reduce the number of connect() calls in TCPListenClose. PiperOrigin-RevId: 293019281
2020-01-31Fix logic around AMD/Intel cases.Adin Scannell
If the support is Ignored, then the call is still executed. We simply rely on it to fall through to the int3. Therefore, we must also bail on the vendor check. PiperOrigin-RevId: 292620558
2020-01-30Simplify testing link rules.Adin Scannell
PiperOrigin-RevId: 292458933
2020-01-30Merge pull request #1471 from xiaobo55x:syscall_testgVisor bot
PiperOrigin-RevId: 292445329
2020-01-30Wrap all GetSocketPairs() in unnamed namespacesJay Zhuang
This avoids conflicting definitions of GetSocketPairs() in outer namespace when multiple such cc files are complied for one binary. PiperOrigin-RevId: 292420885
2020-01-30Merge pull request #1630 from xiaobo55x:kOLargeFilegVisor bot
PiperOrigin-RevId: 292419699
2020-01-30Fix for panic in endpoint.Close().Bhasker Hariharan
When sending a RST on shutdown we need to double check the state after acquiring the work mutex as the endpoint could have transitioned out of a connected state from the time we checked it and we acquired the workMutex. I added two tests but sadly neither reproduce the panic. I am going to leave the tests in as they are good to have anyway. PiperOrigin-RevId: 292393800
2020-01-30Enforce splice offset limitsMichael Pratt
Splice must not allow negative offsets. Writes also must not allow offset + size to overflow int64. Reads are similarly broken, but not just in splice (b/148095030). Reported-by: syzbot+0e1ff0b95fb2859b4190@syzkaller.appspotmail.com PiperOrigin-RevId: 292361208
2020-01-29Add support for TCP_DEFER_ACCEPT.Bhasker Hariharan
PiperOrigin-RevId: 292233574
2020-01-28fs/splice: don't report partial errors for special filesAndrei Vagin
Special files can have additional requirements for granularity. For example, read from eventfd returns EINVAL if a size is less 8 bytes. Reported-by: syzbot+3905f5493bec08eb7b02@syzkaller.appspotmail.com PiperOrigin-RevId: 292002926
2020-01-28netlink: add support for RTM_F_LOOKUP_TABLEJianfeng Tan
Test command: $ ip route get 1.1.1.1 Fixes: #1099 Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com> COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/1121 from tanjianfeng:fix-1099 e6919f3d4ede5aa51a48b3d2be0d7a4b482dd53d PiperOrigin-RevId: 291990716
2020-01-28Check sigsetsize in rt_sigactionMichael Pratt
This isn't in the libc wrapper, but it is in the syscall itself. Discovered by @xiaobo55x in #1625. PiperOrigin-RevId: 291973931
2020-01-28Prefer Type& over Type &Michael Pratt
And Type* over Type *. This is basically a whitespace only change. gVisor code already prefers left-alignment of pointers and references, but clang-format formats for consistency with the majority of a file, and some files leaned the wrong way. This is a one-time pass to make us completely conforming. Autogenerated with: $ find . \( -name "*.cc" -or -name "*.c" -or -name "*.h" \) \ | xargs clang-format -i -style="{BasedOnStyle: Google, \ DerivePointerAlignment: false, PointerAlignment: Left}" PiperOrigin-RevId: 291972421
2020-01-27Create platform_util for tests.Adin Scannell
PiperOrigin-RevId: 291869423
2020-01-27Fix header ordering and format all C++ code.Adin Scannell
PiperOrigin-RevId: 291844200
2020-01-27Update bug number for supporting extended attribute namespaces.Dean Deng
PiperOrigin-RevId: 291774815
2020-01-27Standardize on tools directory.Adin Scannell
PiperOrigin-RevId: 291745021
2020-01-23Unify the kOLargeFile definition in syscall tests.Haibo Xu
Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: Id9d6ae98305a4057d55d622ea4c3ac2228fea212
2020-01-22Merge pull request #1629 from xiaobo55x:fault_testgVisor bot
PiperOrigin-RevId: 291022423
2020-01-22Enable fault() syscall test on arm64.Haibo Xu
Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I9b2b2e0d84946c10cf136abeef6c60642fa3b6ec
2020-01-21Change to standard types.Adin Scannell
PiperOrigin-RevId: 290846481
2020-01-21Merge pull request #1492 from majek:err_typo_in_netstack_testsgVisor bot
PiperOrigin-RevId: 290840370
2020-01-21Correct todos referencing IPV6_RECVTCLASSRyan Heacock
Bug 68320120 was revived because TODOs referenced the IP_RECVTOS bug instead of the IPV6_RECVTCLASS bug. PiperOrigin-RevId: 290820178
2020-01-21Add syscalls for lgetxattr, fgetxattr, lsetxattr, and fsetxattr.Dean Deng
Note that these simply will use the same logic as getxattr and setxattr, which is not yet implemented for most filesystems. PiperOrigin-RevId: 290800960
2020-01-21Merge pull request #1546 from lubinszARM:pr_syscall_test_procgVisor bot
PiperOrigin-RevId: 290789087
2020-01-17Convert EventMask to uint64Andrei Vagin
It is used for signalfd where the maximum signal is 64. PiperOrigin-RevId: 290331008
2020-01-17Enable build of test/syscall tests on arm64.Haibo Xu
Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I277d6c708bbf5c3edd7c3568941cfd01dc122e17
2020-01-16Disable xattr tests.Dean Deng
These can remain disabled until we actually support extended attributes. The following modifications were also made: 1. Disable save/restore on tests that change file permissions. Restore will not work properly for these tests, since it will try to open the file with read-write after it has been read- or write-only. 2. Change user.abc to user.test. PiperOrigin-RevId: 290123941
2020-01-14Changes TCP packet dispatch to use a pool of goroutines.Bhasker Hariharan
All inbound segments for connections in ESTABLISHED state are delivered to the endpoint's queue but for every segment delivered we also queue the endpoint for processing to a selected processor. This ensures that when there are a large number of connections in ESTABLISHED state the inbound packets are all handled by a small number of goroutines and significantly reduces the amount of work the goscheduler has to perform. We let connections in other states follow the current path where the endpoint's goroutine directly handles the segments. Updates #231 PiperOrigin-RevId: 289728325
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 21:42:06 +0000