Age | Commit message (Collapse) | Author |
|
ualarm(2) is obsolete. Move IntervalTimer into a test util, where it can be
used by flock tests.
These tests were flaky with TSAN, probably because it slowed the tests down
enough that the alarm was expiring before flock() was called. Use an interval
timer so that even if we miss the first alarm (or more), flock() is still
guaranteed to be interrupted.
PiperOrigin-RevId: 337578751
|
|
Reported-by: syzbot+5466463b7604c2902875@syzkaller.appspotmail.com
PiperOrigin-RevId: 337451896
|
|
The fix in commit 028e045da93b7c1c26417e80e4b4e388b86a713d was incorrect as
it can cause the right edge of the window to shrink when we announce
a zero window due to receive buffer being full as its done before the check
for seeing if the window is being shrunk because of the selected window.
Further the window was calculated purely on available space but in cases where
we are getting full sized segments it makes more sense to use the actual bytes
being held. This CL changes to use the lower of the total available space vs
the available space in the maximal window we could advertise minus the actual
payload bytes being held.
This change also cleans up the code so that the window selection logic is
not duplicated between getSendParams() and windowCrossedACKThresholdLocked.
PiperOrigin-RevId: 336404827
|
|
test/syscalls/linux/iptables.cc:130:3:
error: C99 designator 'name' outside aggregate initializer
130 | };
|
PiperOrigin-RevId: 336331738
|
|
Updates #267
PiperOrigin-RevId: 335713923
|
|
- When the KCOV_ENABLE_TRACE ioctl is called with the trace kind KCOV_TRACE_PC,
the kcov mode should be set to KCOV_*MODE*_TRACE_PC.
- When the owning task of kcov exits, the memory mapping should not be cleared
so it can be used by other tasks.
- Add more tests (also tested on native Linux kcov).
PiperOrigin-RevId: 335202585
|
|
Adds support for the IPv6-compatible redirect target. Redirection is a limited
form of DNAT, where the destination is always the localhost.
Updates #3549.
PiperOrigin-RevId: 334698344
|
|
PiperOrigin-RevId: 334478850
|
|
Like matchers, targets should use a module-like register/lookup system. This
replaces the brittle switch statements we had before.
The only behavior change is supporing IPT_GET_REVISION_TARGET. This makes it
much easier to add IPv6 redirect in the next change.
Updates #3549.
PiperOrigin-RevId: 334469418
|
|
PiperOrigin-RevId: 334419854
|
|
When the socket is set with SO_LINGER and close()'d in the initial state, it
should not linger and return immediately.
PiperOrigin-RevId: 334263149
|
|
Previously, we did not check the kcov mode when performing task work. As a
result, disabling kcov did not do anything.
Also avoid expensive atomic RMW when consuming coverage data. We don't need the
swap if the value is already zero (which is most of the time), and it is ok if
there are slight inconsistencies due to a race between coverage data generation
(incrementing the value) and consumption (reading a nonzero value and writing
zero).
PiperOrigin-RevId: 334049207
|
|
PiperOrigin-RevId: 333461380
|
|
Mostly simplifies SKIP_IF statements and adds some more documentation.
Also, mknod is now supported by gofer fs, so remove SKIP_IFs related to this.
PiperOrigin-RevId: 333449932
|
|
PiperOrigin-RevId: 332961666
|
|
Calls to recv sometimes fail with EAGAIN, so call select beforehand.
PiperOrigin-RevId: 332943156
|
|
"DefaultValueEqZero" is only valid if the test is in a
sandbox. Our CI VMs often have "/proc/sys/net/ipv4/ip_forward" set
to 1.
PiperOrigin-RevId: 332910859
|
|
PiperOrigin-RevId: 332907453
|
|
`recv` calls with MSG_DONTWAIT can fail with EAGAIN randomly
in tests. Fix this by calling `select` on sockets with a timeout
prior to attempting a `recv`.
PiperOrigin-RevId: 332873735
|
|
PiperOrigin-RevId: 332760843
|
|
Unfortunately, I think TSC misalignment means that we can't really expect any
consistent correspondence between a TSC-based VDSO and the sentry's view of
time on the KVM platform.
PiperOrigin-RevId: 332576147
|
|
PiperOrigin-RevId: 332546659
|
|
Updates #1199
PiperOrigin-RevId: 332539197
|
|
This is more consistent with Linux (see comment on MM.NewSharedAnonMappable()).
We don't do the same thing on VFS1 for reasons documented by the updated
comment.
PiperOrigin-RevId: 332514849
|
|
Updates #3549.
PiperOrigin-RevId: 332501660
|
|
SO_LINGER is a socket level option and should be stored on all endpoints even
though it is used to linger only for TCP endpoints.
PiperOrigin-RevId: 332369252
|
|
This change includes overlay, special regular gofer files, and hostfs.
Fixes #3589.
PiperOrigin-RevId: 332330860
|
|
PiperOrigin-RevId: 332281930
|
|
PiperOrigin-RevId: 332097286
|
|
When a broadcast packet is received by the stack, the packet should be
delivered to each endpoint that may be interested in the packet. This
includes all any address and specified broadcast address listeners.
Test: integration_test.TestReuseAddrAndBroadcast
PiperOrigin-RevId: 332060652
|
|
PiperOrigin-RevId: 331940975
|
|
Make setting STATX_SIZE a no-op, if it is valid for the given permissions and
file type.
Also update proc tests, which were overfitted before.
Fixes #3842.
Updates #1193.
PiperOrigin-RevId: 331861087
|
|
PiperOrigin-RevId: 331824411
|
|
Currently the returned offset is an index, and we can't
use it to find the next fd to serialize, because getdents
should iterate correctly despite mutation of fds. Instead,
we can return the next fd to serialize plus 2 (which
accounts for "." and "..") as the offset.
Fixes: #3894
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
|
|
These operations require CAP_SYS_ADMIN in the root user namespace. There's no
easy way to check that other than trying the operation and seeing what happens.
PiperOrigin-RevId: 331242256
|
|
Overlayfs does not persist a directory's inode number even while it is mounted.
See fs/overlayfs/inode.c:ovl_map_dev_ino(). VFS2 generates a new inode number
for directories everytime in lookup.
PiperOrigin-RevId: 331045037
|
|
Overlayfs intentionally does not compute nlink for directories (because it can
be really expensive). Linux returns 1, VFS2 returns 2 and VFS1 actually
calculates the correct value.
PiperOrigin-RevId: 330967139
|
|
- BindSocketThenOpen test was expecting the incorrect error when opening
a socket. Fixed that.
- VirtualFilesystem.BindEndpointAt should not require pop.Path.Begin.Ok()
because the filesystem implementations do not need to walk to the parent
dentry. This check also exists for MknodAt, MkdirAt, RmdirAt, SymlinkAt and
UnlinkAt but those filesystem implementations also need to walk to the parent
denty. So that check is valid. Added some syscall tests to test this.
PiperOrigin-RevId: 330625220
|
|
PiperOrigin-RevId: 330554450
|
|
Accept on gVisor will return an error if a socket in the accept queue was closed
before Accept() was called. Linux will return the new fd even if the returned
socket is already closed by the peer say due to a RST being sent by the peer.
This seems to be intentional in linux more details on the github issue.
Fixes #3780
PiperOrigin-RevId: 329828404
|
|
PiperOrigin-RevId: 329638946
|
|
These were problematic for vfs2 gofers before correctly implementing separate
read/write handles.
PiperOrigin-RevId: 329613261
|
|
Updates #2972
PiperOrigin-RevId: 329584905
|
|
PiperOrigin-RevId: 329526153
|
|
These mostly guard linux-only headers; check for linux instead.
PiperOrigin-RevId: 329362762
|
|
An earlier change considered the loopback bound to all addresses in an
assigned subnet. This should have only be done for IPv4 to maintain
compatability with Linux:
```
$ ip addr show dev lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ...
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
$ ping 2001:db8::1
PING 2001:db8::1(2001:db8::1) 56 data bytes
^C
--- 2001:db8::1 ping statistics ---
4 packets transmitted, 0 received, 100% packet loss, time 3062ms
$ ping 2001:db8::2
PING 2001:db8::2(2001:db8::2) 56 data bytes
^C
--- 2001:db8::2 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2030ms
$ sudo ip addr add 2001:db8::1/64 dev lo
$ ping 2001:db8::1
PING 2001:db8::1(2001:db8::1) 56 data bytes
64 bytes from 2001:db8::1: icmp_seq=1 ttl=64 time=0.055 ms
64 bytes from 2001:db8::1: icmp_seq=2 ttl=64 time=0.074 ms
64 bytes from 2001:db8::1: icmp_seq=3 ttl=64 time=0.073 ms
64 bytes from 2001:db8::1: icmp_seq=4 ttl=64 time=0.071 ms
^C
--- 2001:db8::1 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3075ms
rtt min/avg/max/mdev = 0.055/0.068/0.074/0.007 ms
$ ping 2001:db8::2
PING 2001:db8::2(2001:db8::2) 56 data bytes
From 2001:db8::1 icmp_seq=1 Destination unreachable: No route
From 2001:db8::1 icmp_seq=2 Destination unreachable: No route
From 2001:db8::1 icmp_seq=3 Destination unreachable: No route
From 2001:db8::1 icmp_seq=4 Destination unreachable: No route
^C
--- 2001:db8::2 ping statistics ---
4 packets transmitted, 0 received, +4 errors, 100% packet loss, time 3070ms
```
Test: integration_test.TestLoopbackAcceptAllInSubnet
PiperOrigin-RevId: 329011566
|
|
This mainly involved enabling kernfs' client filesystems to provide a
StatFS implementation.
Fixes #3411, #3515.
PiperOrigin-RevId: 329009864
|
|
Also, add corresponding EOF tests for splice/sendfile.
Discovered by syzkaller.
PiperOrigin-RevId: 328975990
|
|
Reported-by: syzbot+074ec22c42305725b79f@syzkaller.appspotmail.com
PiperOrigin-RevId: 328963899
|
|
Updates #3780.
PiperOrigin-RevId: 328922573
|