Age | Commit message (Collapse) | Author |
|
When ignored, the trap should be executed which generates
a SIGSEGV as in the above case.
PiperOrigin-RevId: 293618489
|
|
These were out-of-band notes that can help provide additional context
and simplify automated imports.
PiperOrigin-RevId: 293525915
|
|
From RFC 793 s3.9 p58 Event Processing:
If RECEIVE Call arrives in CLOSED state and the user has access to such a
connection, the return should be "error: connection does not exist"
Fixes #1598
PiperOrigin-RevId: 293494287
|
|
PiperOrigin-RevId: 293411655
|
|
PiperOrigin-RevId: 293271055
|
|
Tests 65k connection attempts on common types of sockets to check for port
leaks.
Also fixes a bug where dual-stack sockets wouldn't properly re-queue
segments received while closing.
PiperOrigin-RevId: 293241166
|
|
The timer ID is copied out to the argument.
Fixes #1738
PiperOrigin-RevId: 293210801
|
|
So it can be included in fuchsia's syscall tests
PiperOrigin-RevId: 293208306
|
|
* Tests are picked for a shard differently. It now picks one test from each
block, instead of picking the whole block. This makes the same kind of tests
spreads across different shards.
* Reduce the number of connect() calls in TCPListenClose.
PiperOrigin-RevId: 293019281
|
|
If the support is Ignored, then the call is still executed. We
simply rely on it to fall through to the int3. Therefore, we
must also bail on the vendor check.
PiperOrigin-RevId: 292620558
|
|
PiperOrigin-RevId: 292458933
|
|
PiperOrigin-RevId: 292445329
|
|
This avoids conflicting definitions of GetSocketPairs() in outer namespace when
multiple such cc files are complied for one binary.
PiperOrigin-RevId: 292420885
|
|
PiperOrigin-RevId: 292419699
|
|
When sending a RST on shutdown we need to double check the
state after acquiring the work mutex as the endpoint could
have transitioned out of a connected state from the time
we checked it and we acquired the workMutex.
I added two tests but sadly neither reproduce the panic. I am
going to leave the tests in as they are good to have anyway.
PiperOrigin-RevId: 292393800
|
|
Splice must not allow negative offsets. Writes also must not allow offset +
size to overflow int64. Reads are similarly broken, but not just in splice
(b/148095030).
Reported-by: syzbot+0e1ff0b95fb2859b4190@syzkaller.appspotmail.com
PiperOrigin-RevId: 292361208
|
|
PiperOrigin-RevId: 292233574
|
|
Special files can have additional requirements for granularity.
For example, read from eventfd returns EINVAL if a size is less 8 bytes.
Reported-by: syzbot+3905f5493bec08eb7b02@syzkaller.appspotmail.com
PiperOrigin-RevId: 292002926
|
|
Test command:
$ ip route get 1.1.1.1
Fixes: #1099
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/1121 from tanjianfeng:fix-1099 e6919f3d4ede5aa51a48b3d2be0d7a4b482dd53d
PiperOrigin-RevId: 291990716
|
|
This isn't in the libc wrapper, but it is in the syscall itself.
Discovered by @xiaobo55x in #1625.
PiperOrigin-RevId: 291973931
|
|
And Type* over Type *. This is basically a whitespace only change.
gVisor code already prefers left-alignment of pointers and references, but
clang-format formats for consistency with the majority of a file, and some
files leaned the wrong way. This is a one-time pass to make us completely
conforming.
Autogenerated with:
$ find . \( -name "*.cc" -or -name "*.c" -or -name "*.h" \) \
| xargs clang-format -i -style="{BasedOnStyle: Google, \
DerivePointerAlignment: false, PointerAlignment: Left}"
PiperOrigin-RevId: 291972421
|
|
PiperOrigin-RevId: 291869423
|
|
PiperOrigin-RevId: 291844200
|
|
PiperOrigin-RevId: 291774815
|
|
PiperOrigin-RevId: 291745021
|
|
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: Id9d6ae98305a4057d55d622ea4c3ac2228fea212
|
|
PiperOrigin-RevId: 291022423
|
|
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I9b2b2e0d84946c10cf136abeef6c60642fa3b6ec
|
|
PiperOrigin-RevId: 290846481
|
|
PiperOrigin-RevId: 290840370
|
|
Bug 68320120 was revived because TODOs referenced the IP_RECVTOS bug instead
of the IPV6_RECVTCLASS bug.
PiperOrigin-RevId: 290820178
|
|
Note that these simply will use the same logic as getxattr and setxattr, which
is not yet implemented for most filesystems.
PiperOrigin-RevId: 290800960
|
|
PiperOrigin-RevId: 290789087
|
|
It is used for signalfd where the maximum signal is 64.
PiperOrigin-RevId: 290331008
|
|
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I277d6c708bbf5c3edd7c3568941cfd01dc122e17
|
|
These can remain disabled until we actually support extended attributes.
The following modifications were also made:
1. Disable save/restore on tests that change file permissions. Restore will not
work properly for these tests, since it will try to open the file with
read-write after it has been read- or write-only.
2. Change user.abc to user.test.
PiperOrigin-RevId: 290123941
|
|
All inbound segments for connections in ESTABLISHED state are delivered to the
endpoint's queue but for every segment delivered we also queue the endpoint for
processing to a selected processor. This ensures that when there are a large
number of connections in ESTABLISHED state the inbound packets are all handled
by a small number of goroutines and significantly reduces the amount of work the
goscheduler has to perform.
We let connections in other states follow the current path where the
endpoint's goroutine directly handles the segments.
Updates #231
PiperOrigin-RevId: 289728325
|
|
PiperOrigin-RevId: 289718534
|
|
Fixes #1490
Fixes #1495
PiperOrigin-RevId: 289523250
|
|
PiperOrigin-RevId: 289467083
|
|
This test fails on ubuntu 18.04 because preadv2 for some reason returns
EOPNOTSUPP instead of EINVAL. Instead of root-causing the failure, I'm dropping
the flag in the preadv2 call since it isn't under test in this scenario.
PiperOrigin-RevId: 289188358
|
|
Problems with different platform architectures have been solved.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
PiperOrigin-RevId: 289010316
|
|
This change calls a new Truncate method on the EndpointReader in RecvMsg for
both netlink and unix sockets. This allows readers such as sockets to peek at
the length of data without actually reading it to a buffer.
Fixes #993 #1240
PiperOrigin-RevId: 288800167
|
|
Panic found by syzakller.
PiperOrigin-RevId: 288799046
|
|
PiperOrigin-RevId: 288767927
|
|
PiperOrigin-RevId: 288642552
|
|
The write tests are fitted to Linux-specific behavior, but it is not
well-specified. Tweak the tests to allow for both acceptable outcomes.
PiperOrigin-RevId: 288606386
|
|
PiperOrigin-RevId: 287217899
|
|
Added the ability to get/set the IP_RECVTOS socket option on UDP endpoints. If
enabled, TOS from the incoming Network Header passed as ancillary data in the
ControlMessages.
Test:
* Added unit test to udp_test.go that tests getting/setting as well as
verifying that we receive expected TOS from incoming packet.
* Added a syscall test
PiperOrigin-RevId: 287029703
|