Age | Commit message (Collapse) | Author |
|
iptables sockopts were kludged into an unnecessary check, this properly
relegates them to the {get,set}SockOptIP functions.
PiperOrigin-RevId: 328395135
|
|
When SO_LINGER option is enabled, the close will not return until all the
queued messages are sent and acknowledged for the socket or linger timeout is
reached. If the option is not set, close will return immediately. This option
is mainly supported for connection oriented protocols such as TCP.
PiperOrigin-RevId: 328350576
|
|
We still deviate a bit from linux in how long we will actually wait in
FIN-WAIT-2. Linux seems to cap it with TIME_WAIT_LEN and it's not completely
obvious as to why it's done that way. For now I think we can ignore that and
fix it if it really is an issue.
PiperOrigin-RevId: 328324922
|
|
When a loopback interface is configurd with an address and associated
subnet, the loopback should treat all addresses in that subnet as an
address it owns.
This is mimicking linux behaviour as seen below:
```
$ ip addr show dev lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ...
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
$ ping 192.0.2.1
PING 192.0.2.1 (192.0.2.1) 56(84) bytes of data.
^C
--- 192.0.2.1 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 1018ms
$ ping 192.0.2.2
PING 192.0.2.2 (192.0.2.2) 56(84) bytes of data.
^C
--- 192.0.2.2 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2039ms
$ sudo ip addr add 192.0.2.1/24 dev lo
$ ip addr show dev lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ...
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet 192.0.2.1/24 scope global lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
$ ping 192.0.2.1
PING 192.0.2.1 (192.0.2.1) 56(84) bytes of data.
64 bytes from 192.0.2.1: icmp_seq=1 ttl=64 time=0.131 ms
64 bytes from 192.0.2.1: icmp_seq=2 ttl=64 time=0.046 ms
64 bytes from 192.0.2.1: icmp_seq=3 ttl=64 time=0.048 ms
^C
--- 192.0.2.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2042ms
rtt min/avg/max/mdev = 0.046/0.075/0.131/0.039 ms
$ ping 192.0.2.2
PING 192.0.2.2 (192.0.2.2) 56(84) bytes of data.
64 bytes from 192.0.2.2: icmp_seq=1 ttl=64 time=0.131 ms
64 bytes from 192.0.2.2: icmp_seq=2 ttl=64 time=0.069 ms
64 bytes from 192.0.2.2: icmp_seq=3 ttl=64 time=0.049 ms
64 bytes from 192.0.2.2: icmp_seq=4 ttl=64 time=0.035 ms
^C
--- 192.0.2.2 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3049ms
rtt min/avg/max/mdev = 0.035/0.071/0.131/0.036 ms
```
Test: integration_test.TestLoopbackAcceptAllInSubnet
PiperOrigin-RevId: 328188546
|
|
Add tests for socket re-bind/listen of client and server sockets
with the older connection still in TIME_WAIT state and with
SO_REUSEADDR enabled.
PiperOrigin-RevId: 327924702
|
|
It frequently times out under GoTSAN.
PiperOrigin-RevId: 327894343
|
|
The order of unlink events (dir event/file event) is undefined,
so make tests accept both orderings.
PiperOrigin-RevId: 327873316
|
|
gVisor emulates 4.6 kernel versions, and test doesn't work on 5.0 versions
(observed on our Ubuntu18.04 image). Skip it.
PiperOrigin-RevId: 327845037
|
|
They time out.
PiperOrigin-RevId: 327830892
|
|
PiperOrigin-RevId: 327686558
|
|
Accept 128 + SIGNAL as well as SIGNAL as valid
returns for fork/exec tests.
Also, make changes so that test compiles in opensource. Test
had compile errors on latest Ubuntu 16.04 image with updated bazel to
3.4.0 (as well as base 2.0) used for Kokoro tests.
PiperOrigin-RevId: 327510310
|
|
Tests that we have the correct initial (empty) state for ip6tables.
#3549
PiperOrigin-RevId: 327477657
|
|
Skip check for ECN bits in native/linux tests. General advice
for the ECN field is to leave the setting to the kernel, so
behavior of the test is undefined for different kernels.
http://www.masterraghu.com/subjects/np/introduction/unix_network_programming_v1.3/ch07lev1sec6.html
PiperOrigin-RevId: 327451414
|
|
test_eintr now passes in the Python runtime tests.
Updates #3515.
PiperOrigin-RevId: 327441081
|
|
Some machines return 128 + signal for failures. Accept that
as a valid result.
PiperOrigin-RevId: 327326113
|
|
tv_usec field should be a multiple of 4K to pass
in open source on linux/native, so make it one.
PiperOrigin-RevId: 327288405
|
|
Skip InvalidOffset and InvalidLength for Linux as the test is invalid for
later Kernel versions.
Add UnsupportedFile test as this check is in all kernel versions.
PiperOrigin-RevId: 327248035
|
|
Some systems return 128 + errno instead of just errno, which is the case
here.
PiperOrigin-RevId: 327247836
|
|
Setting timeouts for sockets on GCP images (debian) for usecs only
respects multiples of 4K. Set the test with a multiple of 4K with a comment.
PiperOrigin-RevId: 327093848
|
|
Fixes python runtime test test_glob.
Updates #3515
We were checking is the to-be-opened dentry is a dir or not before resolving
symlinks. We should check that after resolving symlinks.
This was preventing us from opening a symlink which pointed to a directory
with O_DIRECTORY.
Also added this check in tmpfs and removed a duplicate check.
PiperOrigin-RevId: 327085895
|
|
PiperOrigin-RevId: 326686761
|
|
Fixes php runtime test ext/standard/tests/file/readfile_basic.phpt
Fixes #3516
fsgofers only want the access mode in the OpenFlags passed to Create(). If more
flags are supplied (like O_APPEND in this case), read/write from that fd will
fail with EBADF. See runsc/fsgofer/fsgofer.go:WriteAt()
VFS2 was providing more than just access modes. So filtering the flags using
p9.OpenFlagsModeMask == linux.O_ACCMODE fixes the issue.
Gofer in VFS1 also only extracts the access mode flags while making the create
RPC. See pkg/sentry/fs/gofer/path.go:Create()
Even in VFS2, when we open a handle, we extract out only the access mode flags
+ O_TRUNC.
See third_party/gvisor/pkg/sentry/fsimpl/gofer/handle.go:openHandle()
Added a test for this.
PiperOrigin-RevId: 326574829
|
|
Netstack's TIME-WAIT state for a TCP socket could be terminated prematurely if
the socket entered TIME-WAIT using shutdown(..., SHUT_RDWR) and then was closed
using close(). This fixes that bug and updates the tests to verify that Netstack
correctly honors TIME-WAIT under such conditions.
Fixes #3106
PiperOrigin-RevId: 326456443
|
|
Fixes php test ext/standard/tests/file/touch_variation5.phpt on vfs2.
Updates #3516
Also spotted a bug with O_EXCL, where we did not return EEXIST when we tried
to open the root of the filesystem with O_EXCL | O_CREAT.
Added some more tests for open() corner cases.
PiperOrigin-RevId: 326346863
|
|
IPPacketInfo.DestinationAddr should hold the destination of the IP
packet, not the source. This change fixes that bug.
PiperOrigin-RevId: 325910766
|
|
It was changed in the Linux kernel:
commit f0628c524fd188c3f9418e12478dfdfadacba815
Date: Fri Apr 24 16:06:16 2020 +0800
net: Replace the limit of TCP_LINGER2 with TCP_FIN_TIMEOUT_MAX
PiperOrigin-RevId: 325493859
|
|
PiperOrigin-RevId: 325472312
|
|
/proc/sys/net/ipv4/tcp_recovery is used to enable RACK loss
recovery in TCP.
PiperOrigin-RevId: 325157807
|
|
Updates #1479, #2923.
PiperOrigin-RevId: 324658826
|
|
PiperOrigin-RevId: 324657612
|
|
Before kernel version 4.16-rc6, fuse mount is protected by
capable(CAP_SYS_ADMIN). After this version, it uses
ns_capable(CAP_SYS_ADMIN) to protect. Before the 4.16 kernel,
it was not allowed to mount fuse file systems without the
global CAP_SYS_ADMIN.
Fixes #3360
|
|
A new network namespace has only the local route table.
PiperOrigin-RevId: 324303629
|
|
PiperOrigin-RevId: 324249991
|
|
Return on success should be 0, not size of the struct copied out.
PiperOrigin-RevId: 324029193
|
|
PiperOrigin-RevId: 324017310
|
|
Compare Linux's fs/eventpoll.c:do_epoll_ctl(). I don't know where EPOLLRDHUP
came from.
PiperOrigin-RevId: 323874419
|
|
PiperOrigin-RevId: 323715260
|
|
PiperOrigin-RevId: 323426851
|
|
PiperOrigin-RevId: 322904430
|
|
PiperOrigin-RevId: 322890087
|
|
Allow FUSE filesystems to be mounted using libfuse.
The appropriate flags and mount options are parsed and
understood by fusefs.
|
|
PiperOrigin-RevId: 322859907
|
|
Fixes #3334
PiperOrigin-RevId: 322846384
|
|
Helps in fixing open syscall tests: AppendConcurrentWrite and AppendOnly.
We also now update the file size for seekable special files (regular files)
which we were not doing earlier.
Updates #2923
PiperOrigin-RevId: 322670843
|
|
Updates #173
PiperOrigin-RevId: 322665518
|
|
Temporarily skip these, on bhaskherh@'s advice.
PiperOrigin-RevId: 322664955
|
|
Updates #173
PiperOrigin-RevId: 321690756
|
|
Packet sockets also seem to allow double binding and do not return an error on
linux. This was tested by running the syscall test in a linux namespace as root
and the current test DoubleBind fails@HEAD.
Passes after this change.
Updates #173
PiperOrigin-RevId: 321445137
|
|
gVisor incorrectly returns the wrong ARP type for SIOGIFHWADDR. This breaks
tcpdump as it tries to interpret the packets incorrectly.
Similarly, SIOCETHTOOL is used by tcpdump to query interface properties which
fails with an EINVAL since we don't implement it. For now change it to return
EOPNOTSUPP to indicate that we don't support the query rather than return
EINVAL.
NOTE: ARPHRD types for link endpoints are distinct from NIC capabilities
and NIC flags. In Linux all 3 exist eg. ARPHRD types are stored in dev->type
field while NIC capabilities are more like the device features which can be
queried using SIOCETHTOOL but not modified and NIC Flags are fields that can
be modified from user space. eg. NIC status (UP/DOWN/MULTICAST/BROADCAST) etc.
Updates #2746
PiperOrigin-RevId: 321436525
|
|
PiperOrigin-RevId: 321411758
|