summaryrefslogtreecommitdiffhomepage
path: root/test/syscalls/linux/socket_inet_loopback.cc
AgeCommit message (Collapse)Author
2020-01-21Merge pull request #1492 from majek:err_typo_in_netstack_testsgVisor bot
PiperOrigin-RevId: 290840370
2020-01-14Changes TCP packet dispatch to use a pool of goroutines.Bhasker Hariharan
All inbound segments for connections in ESTABLISHED state are delivered to the endpoint's queue but for every segment delivered we also queue the endpoint for processing to a selected processor. This ensures that when there are a large number of connections in ESTABLISHED state the inbound packets are all handled by a small number of goroutines and significantly reduces the amount of work the goscheduler has to perform. We let connections in other states follow the current path where the endpoint's goroutine directly handles the segments. Updates #231 PiperOrigin-RevId: 289728325
2020-01-13Allow dual stack sockets to operate on AF_INETTamir Duberstein
Fixes #1490 Fixes #1495 PiperOrigin-RevId: 289523250
2020-01-09Deflake a couple of TCP syscall tests when run under gotsan.Bhasker Hariharan
PiperOrigin-RevId: 289010316
2019-12-18net/tcp: allow to call listen without bindAndrei Vagin
When listen(2) is called on an unbound socket, the socket is automatically bound to a random free port with the local address set to INADDR_ANY. PiperOrigin-RevId: 286305906
2019-12-18Switch to netinet/tcp.h and poll.h to for better platform portability.Jay Zhuang
PiperOrigin-RevId: 286249699
2019-12-11Add support for TCP_USER_TIMEOUT option.Bhasker Hariharan
The implementation follows the linux behavior where specifying a TCP_USER_TIMEOUT will cause the resend timer to honor the user specified timeout rather than the default rto based timeout. Further it alters when connections are timedout due to keepalive failures. It does not alter the behavior of when keepalives are sent. This is as per the linux behavior. PiperOrigin-RevId: 285099795
2019-12-05Reduce flakiness under gotsan runs.Bhasker Hariharan
TcpPortReuseMultiThread creates lots of connections which result in a lot of goroutines in the sentry. This can cause gotsan runs to take really long and timeout. Increasing listen backlog and reducing number of connections should help the connections complete faster as well as reduce the number of goroutines that gotsan needs to track. PiperOrigin-RevId: 284046018
2019-11-11Update ephemeral port reservation tests.Ian Gudger
The existing tests which are disabled on gVisor are failing because we default to SO_REUSEADDR being enabled for TCP sockets. Update the test comments. Also add new tests for enabled SO_REUSEADDR. PiperOrigin-RevId: 279862275
2019-11-07Add support for TIME_WAIT timeout.Bhasker Hariharan
This change adds explicit support for honoring the 2MSL timeout for sockets in TIME_WAIT state. It also adds support for the TCP_LINGER2 option that allows modification of the FIN_WAIT2 state timeout duration for a given socket. It also adds an option to modify the Stack wide TIME_WAIT timeout but this is only for testing. On Linux this is fixed at 60s. Further, we also now correctly process RST's in CLOSE_WAIT and close the socket similar to linux without moving it to error state. We also now handle SYN in ESTABLISHED state as per RFC5961#section-4.1. Earlier we would just drop these SYNs. Which can result in some tests that pass on linux to fail on gVisor. Netstack now honors TIME_WAIT correctly as well as handles the following cases correctly. - TCP RSTs in TIME_WAIT are ignored. - A duplicate TCP FIN during TIME_WAIT extends the TIME_WAIT and a dup ACK is sent in response to the FIN as the dup FIN indicates potential loss of the original final ACK. - An out of order segment during TIME_WAIT generates a dup ACK. - A new SYN w/ a sequence number > the highest sequence number in the previous connection closes the TIME_WAIT early and opens a new connection. Further to make the SYN case work correctly the ISN (Initial Sequence Number) generation for Netstack has been updated to be as per RFC. Its not a pure random number anymore and follows the recommendation in https://tools.ietf.org/html/rfc6528#page-3. The current hash used is not a cryptographically secure hash function. A separate change will update the hash function used to Siphash similar to what is used in Linux. PiperOrigin-RevId: 279106406
2019-10-30Store endpoints inside multiPortEndpoint in a sorted orderAndrei Vagin
It is required to guarantee the same order of endpoints after save/restore. PiperOrigin-RevId: 277598665
2019-08-06Fix for a panic due to writing to a closed accept channel.Bhasker Hariharan
This can happen because endpoint.Close() closes the accept channel first and then drains/resets any accepted but not delivered connections. But there can be connections that are connected but not delivered to the channel as the channel was full. But closing the channel can cause these writes to fail with a write to a closed channel. The correct solution is to abort any connections in SYN-RCVD state and drain/abort all completed connections before closing the accept channel. PiperOrigin-RevId: 261951132
2019-06-10Fixes to listen backlog handling.Bhasker Hariharan
Changes netstack to confirm to current linux behaviour where if the backlog is full then we drop the SYN and do not send a SYN-ACK. Similarly we allow upto backlog connections to be in SYN-RCVD state as long as the backlog is not full. We also now drop a SYN if syn cookies are in use and the backlog for the listening endpoint is full. Added new tests to confirm the behaviour. Also reverted the change to increase the backlog in TcpPortReuseMultiThread syscall test. Fixes #236 PiperOrigin-RevId: 252500462
2019-06-06Try increase listen backlog.Rahat Mahmood
PiperOrigin-RevId: 251928000
2019-05-03Proper cleanup of sockets that used REUSEPORTChris Kuiper
Fixed a small logic error that broke proper accounting of MultiPortEndpoints. PiperOrigin-RevId: 246502126 Change-Id: I1a7d6ea134f811612e545676212899a3707bc2c2
2019-04-29Change copyright notice to "The gVisor Authors"Michael Pratt
Based on the guidelines at https://opensource.google.com/docs/releasing/authors/. 1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./' 2. Manual fixup of "Google Inc" references. 3. Add AUTHORS file. Authors may request to be added to this file. 4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS. Fixes #209 PiperOrigin-RevId: 245823212 Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
2019-04-29Allow and document bug ids in gVisor codebase.Nicolas Lacasse
PiperOrigin-RevId: 245818639 Change-Id: I03703ef0fb9b6675955637b9fe2776204c545789
2019-04-29Appease googletest deprecationTamir Duberstein
PiperOrigin-RevId: 245788366 Change-Id: I17bbecf8493132dbe95564c34c45b838194bfabb
2019-04-26Remove syscall tests' dependency on glogTamir Duberstein
PiperOrigin-RevId: 245469859 Change-Id: I0610e477cc3a884275852e83028ecfb501f2c039
2019-02-08Use socket address functions in unbound IPv4 UDP tests.Ian Gudger
Also switch to the correct casing style for local address variables. PiperOrigin-RevId: 233161128 Change-Id: Ibc4a10a5d3ab04c40907aa885e8237b255c65a79
2019-01-23Fix cases of missing braces on ifMichael Pratt
PiperOrigin-RevId: 230641540 Change-Id: Icccc3cdeec191138940f0ecea0a29798359d2b1f
2018-12-28Implement SO_REUSEPORT for TCP and UDP socketsAndrei Vagin
This option allows multiple sockets to be bound to the same port. Incoming packets are distributed to sockets using a hash based on source and destination addresses. This means that all packets from one sender will be received by the same server socket. PiperOrigin-RevId: 227153413 Change-Id: I59b6edda9c2209d5b8968671e9129adb675920cf
2018-12-20test: deflake socket_inet_loopback.Zhaozhong Ni
PiperOrigin-RevId: 226350590 Change-Id: Idff080705f644f8f78ce92b53c77eecc37e002e7
2018-12-10Open source system call tests.Brian Geffon
PiperOrigin-RevId: 224886231 Change-Id: I0fccb4d994601739d8b16b1d4e6b31f40297fb22
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 17:04:27 +0000