summaryrefslogtreecommitdiffhomepage
path: root/test/syscalls/linux/BUILD
AgeCommit message (Collapse)Author
2020-09-21Fix socket_ipv4_udp_unbound_test_native in opensource.Zach Koopmans
Calls to recv sometimes fail with EAGAIN, so call select beforehand. PiperOrigin-RevId: 332943156
2020-09-18Use a tmpfs file for shared anonymous and /dev/zero mmap on VFS2.Jamie Liu
This is more consistent with Linux (see comment on MM.NewSharedAnonMappable()). We don't do the same thing on VFS1 for reasons documented by the updated comment. PiperOrigin-RevId: 332514849
2020-09-16Receive broadcast packets on interested endpointsGhanan Gowripalan
When a broadcast packet is received by the stack, the packet should be delivered to each endpoint that may be interested in the packet. This includes all any address and specified broadcast address listeners. Test: integration_test.TestReuseAddrAndBroadcast PiperOrigin-RevId: 332060652
2020-08-31Remove __fuchsia__ definesTamir Duberstein
These mostly guard linux-only headers; check for linux instead. PiperOrigin-RevId: 329362762
2020-08-28Don't bind loopback to all IPs in an IPv6 subnetGhanan Gowripalan
An earlier change considered the loopback bound to all addresses in an assigned subnet. This should have only be done for IPv4 to maintain compatability with Linux: ``` $ ip addr show dev lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ... link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever $ ping 2001:db8::1 PING 2001:db8::1(2001:db8::1) 56 data bytes ^C --- 2001:db8::1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3062ms $ ping 2001:db8::2 PING 2001:db8::2(2001:db8::2) 56 data bytes ^C --- 2001:db8::2 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2030ms $ sudo ip addr add 2001:db8::1/64 dev lo $ ping 2001:db8::1 PING 2001:db8::1(2001:db8::1) 56 data bytes 64 bytes from 2001:db8::1: icmp_seq=1 ttl=64 time=0.055 ms 64 bytes from 2001:db8::1: icmp_seq=2 ttl=64 time=0.074 ms 64 bytes from 2001:db8::1: icmp_seq=3 ttl=64 time=0.073 ms 64 bytes from 2001:db8::1: icmp_seq=4 ttl=64 time=0.071 ms ^C --- 2001:db8::1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3075ms rtt min/avg/max/mdev = 0.055/0.068/0.074/0.007 ms $ ping 2001:db8::2 PING 2001:db8::2(2001:db8::2) 56 data bytes From 2001:db8::1 icmp_seq=1 Destination unreachable: No route From 2001:db8::1 icmp_seq=2 Destination unreachable: No route From 2001:db8::1 icmp_seq=3 Destination unreachable: No route From 2001:db8::1 icmp_seq=4 Destination unreachable: No route ^C --- 2001:db8::2 ping statistics --- 4 packets transmitted, 0 received, +4 errors, 100% packet loss, time 3070ms ``` Test: integration_test.TestLoopbackAcceptAllInSubnet PiperOrigin-RevId: 329011566
2020-08-25Expose basic coverage information to userspace through kcov interface.Dean Deng
In Linux, a kernel configuration is set that compiles the kernel with a custom function that is called at the beginning of every basic block, which updates the memory-mapped coverage information. The Go coverage tool does not allow us to inject arbitrary instructions into basic blocks, but it does provide data that we can convert to a kcov-like format and transfer them to userspace through a memory mapping. Note that this is not a strict implementation of kcov, which is especially tricky to do because we do not have the same coverage tools available in Go that that are available for the actual Linux kernel. In Linux, a kernel configuration is set that compiles the kernel with a custom function that is called at the beginning of every basic block to write program counters to the kcov memory mapping. In Go, however, coverage tools only give us a count of basic blocks as they are executed. Every time we return to userspace, we collect the coverage information and write out PCs for each block that was executed, providing userspace with the illusion that the kcov data is always up to date. For convenience, we also generate a unique synthetic PC for each block instead of using actual PCs. Finally, we do not provide thread-specific coverage data (each kcov instance only contains PCs executed by the thread owning it); instead, we will supply data for any file specified by -- instrumentation_filter. Also, fix issue in nogo that was causing pkg/coverage:coverage_nogo compilation to fail. PiperOrigin-RevId: 328426526
2020-08-24Consider loopback bound to all addresses in subnetGhanan Gowripalan
When a loopback interface is configurd with an address and associated subnet, the loopback should treat all addresses in that subnet as an address it owns. This is mimicking linux behaviour as seen below: ``` $ ip addr show dev lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ... link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever $ ping 192.0.2.1 PING 192.0.2.1 (192.0.2.1) 56(84) bytes of data. ^C --- 192.0.2.1 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1018ms $ ping 192.0.2.2 PING 192.0.2.2 (192.0.2.2) 56(84) bytes of data. ^C --- 192.0.2.2 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2039ms $ sudo ip addr add 192.0.2.1/24 dev lo $ ip addr show dev lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ... link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet 192.0.2.1/24 scope global lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever $ ping 192.0.2.1 PING 192.0.2.1 (192.0.2.1) 56(84) bytes of data. 64 bytes from 192.0.2.1: icmp_seq=1 ttl=64 time=0.131 ms 64 bytes from 192.0.2.1: icmp_seq=2 ttl=64 time=0.046 ms 64 bytes from 192.0.2.1: icmp_seq=3 ttl=64 time=0.048 ms ^C --- 192.0.2.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2042ms rtt min/avg/max/mdev = 0.046/0.075/0.131/0.039 ms $ ping 192.0.2.2 PING 192.0.2.2 (192.0.2.2) 56(84) bytes of data. 64 bytes from 192.0.2.2: icmp_seq=1 ttl=64 time=0.131 ms 64 bytes from 192.0.2.2: icmp_seq=2 ttl=64 time=0.069 ms 64 bytes from 192.0.2.2: icmp_seq=3 ttl=64 time=0.049 ms 64 bytes from 192.0.2.2: icmp_seq=4 ttl=64 time=0.035 ms ^C --- 192.0.2.2 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3049ms rtt min/avg/max/mdev = 0.035/0.071/0.131/0.036 ms ``` Test: integration_test.TestLoopbackAcceptAllInSubnet PiperOrigin-RevId: 328188546
2020-08-21Move udp port exhaustion tests to a 'nogotsan' one.Ting-Yu Wang
It frequently times out under GoTSAN. PiperOrigin-RevId: 327894343
2020-08-19Fix return for rseq_test.Zach Koopmans
Accept 128 + SIGNAL as well as SIGNAL as valid returns for fork/exec tests. Also, make changes so that test compiles in opensource. Test had compile errors on latest Ubuntu 16.04 image with updated bazel to 3.4.0 (as well as base 2.0) used for Kokoro tests. PiperOrigin-RevId: 327510310
2020-08-19ip6tables: test initial stateKevin Krakauer
Tests that we have the correct initial (empty) state for ip6tables. #3549 PiperOrigin-RevId: 327477657
2020-08-18Fix readahead test for opensource.Zach Koopmans
Skip InvalidOffset and InvalidLength for Linux as the test is invalid for later Kernel versions. Add UnsupportedFile test as this check is in all kernel versions. PiperOrigin-RevId: 327248035
2020-07-23Internal change.gVisor bot
PiperOrigin-RevId: 322859907
2020-07-11Stub out SO_DETACH_FILTER.Bhasker Hariharan
Updates #2746 PiperOrigin-RevId: 320757963
2020-07-01Port fallocate to VFS2.Zach Koopmans
PiperOrigin-RevId: 319283715
2020-06-29Refactor udp_socket_testZach Koopmans
Bring udp_socket_test into complianc by: - Eliminating IsRunningOnGvisor() invocations. - Wrapping sockets in RAII FileDescriptor objects. - Creating a Bind() method so that the first bind happens on port 0. PiperOrigin-RevId: 318909396
2020-06-27Port GETOWN, SETOWN fcntls to vfs2.Dean Deng
Also make some fixes to vfs1's F_SETOWN. The fcntl test now entirely passes on vfs2. Fixes #2920. PiperOrigin-RevId: 318669529
2020-06-26IPv6 raw sockets. Needed for ip6tables.Kevin Krakauer
IPv6 raw sockets never include the IPv6 header. PiperOrigin-RevId: 318582989
2020-06-23Support inotify in vfs2 gofer fs.Dean Deng
Because there is no inode structure stored in the sandbox, inotify watches must be held on the dentry. This would be an issue in the presence of hard links, where multiple dentries would need to share the same set of watches, but in VFS2, we do not support the internal creation of hard links on gofer fs. As a result, we make the assumption that every dentry corresponds to a unique inode. Furthermore, dentries can be cached and then evicted, even if the underlying file has not be deleted. We must prevent this from occurring if there are any watches that would be lost. Note that if the dentry was deleted or invalidated (d.vfsd.IsDead()), we should still destroy it along with its watches. Additionally, when a dentry’s last watch is removed, we cache it if it also has zero references. This way, the dentry can eventually be evicted from memory if it is no longer needed. This is accomplished with a new dentry method, OnZeroWatches(), which is called by Inotify.RmWatch and Inotify.Release. Note that it must be called after all inotify locks are released to avoid violating lock order. Stress tests are added to make sure that inotify operations don't deadlock with gofer.OnZeroWatches. Updates #1479. PiperOrigin-RevId: 317958034
2020-06-17Implement POSIX locksFabricio Voznika
- Change FileDescriptionImpl Lock/UnlockPOSIX signature to take {start,length,whence}, so the correct offset can be calculated in the implementations. - Create PosixLocker interface to make it possible to share the same locking code from different implementations. Closes #1480 PiperOrigin-RevId: 316910286
2020-06-15Correctly set the test VFS environment variable.Rahat Mahmood
Also fix test bugs uncovered now that they aren't silently skipped on VFS2. Updates #1487. PiperOrigin-RevId: 316415807
2020-06-11Merge pull request #2705 from lubinszARM:pr_sigfp_nestedgVisor bot
PiperOrigin-RevId: 315979564
2020-06-09Implement flock(2) in VFS2Fabricio Voznika
LockFD is the generic implementation that can be embedded in FileDescriptionImpl implementations. Unique lock ID is maintained in vfs.FileDescription and is created on demand. Updates #1480 PiperOrigin-RevId: 315604825
2020-06-05Fix error code returned due to Port exhaustion.Bhasker Hariharan
For TCP sockets gVisor incorrectly returns EAGAIN when no ephemeral ports are available to bind during a connect. Linux returns EADDRNOTAVAIL. This change fixes gVisor to return the correct code and adds a test for the same. This change also fixes a minor bug for ping sockets where connect() would fail with EINVAL unless the socket was bound first. Also added tests for testing UDP Port exhaustion and Ping socket port exhaustion. PiperOrigin-RevId: 314988525
2020-05-29Port inotify to vfs2, with support in tmpfs.Dean Deng
Support in other filesystem impls is still needed. Unlike in Linux and vfs1, we need to plumb inotify down to each filesystem implementation in order to keep track of links/inode structures properly. IN_EXCL_UNLINK still needs to be implemented, as well as a few inotify hooks that are not present in either vfs1 or vfs2. Those will be addressed in subsequent changes. Updates #1479. PiperOrigin-RevId: 313781995
2020-05-15passed the syscall test case 'fpsig_nested' on Arm64 platformBin Lu
Some functions were added for Arm64 platform: a, get_fp/set_fp b, inline_tgkill Test step: bazel test //test/syscalls:fpsig_nested_test_runsc_ptrace Signed-off-by: Bin Lu <bin.lu@arm.com>
2020-05-14Merge pull request #2663 from lubinszARM:pr_sigfp_forkgVisor bot
PiperOrigin-RevId: 311573552
2020-05-13Resolve remaining TODOs for tmpfs.Nicolas Lacasse
Closes #1197 PiperOrigin-RevId: 311438223
2020-05-11Internal change.gVisor bot
PiperOrigin-RevId: 310941717
2020-05-11passed the syscall test case 'fpsig_fork' on Arm64 platformBin Lu
Some functions were added for Arm64 platform: a, get_fp/set_fp b, inline_tgkill Test step: bazel test //test/syscalls:fpsig_fork_test_runsc_ptrace Signed-off-by: Bin Lu <bin.lu@arm.com>
2020-04-28Fix Unix socket permissions.Dean Deng
Enforce write permission checks in BoundEndpointAt, which corresponds to the permission checks in Linux (net/unix/af_unix.c:unix_find_other). Also, create bound socket files with the correct permissions in VFS2. Fixes #2324. PiperOrigin-RevId: 308949084
2020-04-14Merge pull request #2375 from lubinszARM:pr_exec_binarygVisor bot
PiperOrigin-RevId: 306432289
2020-04-09Dedup netlink utility functions in tests.Ting-Yu Wang
PiperOrigin-RevId: 305749697
2020-04-08splice: cap splice calls to MAX_RW_COUNTAndrei Vagin
The Linux does the same. Reported-by: syzbot+e81716e8956e92e9d56b@syzkaller.appspotmail.com PiperOrigin-RevId: 305625439
2020-04-08Enable exec_binary syscall test on Arm64Bin Lu
Signed-off-by: Bin Lu <bin.lu@arm.com>
2020-03-18Enable syscall sysret_test on arm64.Haibo Xu
Fixes #2058 Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I05750d238a6425d3a47fae15720901f4dd924a32
2020-03-12Remove flaky network namespace test that uses clone().Ting-Yu Wang
PiperOrigin-RevId: 300626011
2020-03-05Stub oom_score_adj and oom_score.Ian Lewis
Adds an oom_score_adj and oom_score proc file stub. oom_score_adj accepts writes of values -1000 to 1000 and persists the value with the task. New tasks inherit the parent's oom_score_adj. oom_score is a read-only stub that always returns the value '0'. Issue #202 PiperOrigin-RevId: 299245355
2020-03-05Merge pull request #2036 from xiaobo55x:syscall_testgVisor bot
PiperOrigin-RevId: 299151227
2020-03-03Move temp_umask to test/util.Adin Scannell
PiperOrigin-RevId: 298667595
2020-03-02Fix syscall test build error on arm64.Haibo Xu
The error was introduced in the merge of PR #1471. Some codes are missing when adding bazel select_arch command to the test/syscall/linux/BUILD file. Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I8cae3f4ae78c2e14671f3ac6e7361dc2806d9305
2020-02-28Hide /dev/net/tun when using hostinet.Ting-Yu Wang
/dev/net/tun does not currently work with hostinet. This has caused some program starts failing because it thinks the feature exists. PiperOrigin-RevId: 297876196
2020-02-21Implement tap/tun device in vfs.Ting-Yu Wang
PiperOrigin-RevId: 296526279
2020-02-20Initial network namespace support.gVisor bot
TCP/IP will work with netstack networking. hostinet doesn't work, and sockets will have the same behavior as it is now. Before the userspace is able to create device, the default loopback device can be used to test. /proc/net and /sys/net will still be connected to the root network stack; this is the same behavior now. Issue #1833 PiperOrigin-RevId: 296309389
2020-02-19Include more test files in exports_filesgVisor bot
So that they can be included by Fuchsia's syscall tests PiperOrigin-RevId: 296030383
2020-02-12Include more test files in exports_filesgVisor bot
So that they can be included by Fuchsia's syscall tests PiperOrigin-RevId: 294654890
2020-02-07Support listxattr and removexattr syscalls.Dean Deng
Note that these are only implemented for tmpfs, and other impls will still return EOPNOTSUPP. PiperOrigin-RevId: 293899385
2020-02-07Refactor syscall testsJay Zhuang
- Move shared helpers V4Multicast and V4Broadcast to socket_test_util - Add unnamed namespace so socket_ipv4_tcp_unbound_external_networking_test.cc and socket_ipv4_udp_unbound_external_networking_test.cc can be compiled together - Add test files to "exports_files" so they can be included by Fuchsia's syscall test setup PiperOrigin-RevId: 293880429
2020-02-04Support RTM_NEWADDR and RTM_GETLINK in (rt)netlink.Ting-Yu Wang
PiperOrigin-RevId: 293271055
2020-02-04Add socket connection stress test.Ian Gudger
Tests 65k connection attempts on common types of sockets to check for port leaks. Also fixes a bug where dual-stack sockets wouldn't properly re-queue segments received while closing. PiperOrigin-RevId: 293241166
2020-02-04Include socket_ip_udp_loopback.cc in exportes_filesJay Zhuang
So it can be included in fuchsia's syscall tests PiperOrigin-RevId: 293208306
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 21:49:59 +0000