summaryrefslogtreecommitdiffhomepage
path: root/test/syscalls/BUILD
AgeCommit message (Collapse)Author
2021-06-29Add SIOCGIFFLAGS ioctl support to hostinet.Lucas Manning
PiperOrigin-RevId: 382194711
2021-06-24Run `:socket_inet_loopback_isolated_test_linux` tests in a container.Etienne Perot
This creates new user and network namespaces for all tests in `:socket_inet_loopback_isolated_test_linux`. PiperOrigin-RevId: 381374120
2021-06-22`socket_inet_loopback`: Split off tests that need isolation in their own file.Etienne Perot
This allows these tests, which can cause flakiness when run in the same network namespace as the other `socket_inet_loopback` tests, to run as separate tests in their own environment. It also means that all of the shards of those tests can be more isolated from each other as well. PiperOrigin-RevId: 380930198
2021-05-26Add verity getdents testsChong Cai
PiperOrigin-RevId: 376001603
2021-05-14Add verity_mmap testsChong Cai
PiperOrigin-RevId: 373854462
2021-04-22Add mlock syscall testFabricio Voznika
PiperOrigin-RevId: 369993733
2021-04-05Add initial verity ioctl syscall testsChong Cai
PiperOrigin-RevId: 366907152
2021-04-05Allow user mount for verity fsChong Cai
Allow user mounting a verity fs on an existing mount by specifying mount flags root_hash and lower_path. PiperOrigin-RevId: 366843846
2021-04-03Remove eternal and enormous tests.Adin Scannell
PiperOrigin-RevId: 366573366
2021-04-02Implement cgroupfs.Rahat Mahmood
A skeleton implementation of cgroupfs. It supports trivial cpu and memory controllers with no support for hierarchies. PiperOrigin-RevId: 366561126
2021-03-11Remove special casing of socket stress testKevin Krakauer
With /proc/sys/net/ipv4/ip_local_port_range implemented, the socket stress test runs in a more normal time and doesn't need to sacrifice coverage to prevent timeouts. PiperOrigin-RevId: 362443366
2021-02-10Support setgid directories in tmpfs and kernfsKevin Krakauer
PiperOrigin-RevId: 356868412
2021-02-09kernel: reparentLocked has to update children maps of old and new parentsAndrei Vagin
Reported-by: syzbot+9ffc71246fe72c73fc25@syzkaller.appspotmail.com PiperOrigin-RevId: 356536113
2021-01-29setgid directory syscall testsKevin Krakauer
PiperOrigin-RevId: 354615220
2021-01-19platform/ptrace: workaround a kernel ptrace issue on ARM64Andrei Vagin
On ARM64, when ptrace stops on a system call, it uses the x7 register to indicate whether the stop has been signalled from syscall entry or syscall exit. This means that we can't get a value of this register and we can't change it. More details are in the comment for tracehook_report_syscall in arch/arm64/kernel/ptrace.c. This happens only if we stop on a system call, so let's queue a signal, resume a stub thread and catch it on a signal handling. Fixes: #5238 PiperOrigin-RevId: 352668695
2021-01-06Run external networking testKevin Krakauer
PiperOrigin-RevId: 350438564
2021-01-06Support add/remove IPv6 multicast group sock optGhanan Gowripalan
IPv4 was always supported but UDP never supported joining/leaving IPv6 multicast groups via socket options. Add: IPPROTO_IPV6, IPV6_JOIN_GROUP/IPV6_ADD_MEMBERSHIP Remove: IPPROTO_IPV6, IPV6_LEAVE_GROUP/IPV6_DROP_MEMBERSHIP Test: integration_test.TestUDPAddRemoveMembershipSocketOption PiperOrigin-RevId: 350396072
2020-12-14[netstack] Update raw socket and hostinet control message parsing.Ayush Ranjan
There are surprisingly few syscall tests that run with hostinet. For example running the following command only returns two results: `bazel query test/syscalls:all | grep hostnet` I think as a result, as our control messages evolved, hostinet was left behind. Update it to support all control messages netstack supports. This change also updates sentry's control message parsing logic to make it up to date with all the control messages we support. PiperOrigin-RevId: 347508892
2020-12-03Support partitions for other tests.Adin Scannell
PiperOrigin-RevId: 345399936
2020-10-31net/tcpip: connect to unset loopback address has to return EADDRNOTAVAILAndrei Vagin
In the docker container, the ipv6 loopback address is not set, and connect("::1") has to return ENEADDRNOTAVAIL in this case. Without this fix, it returns EHOSTUNREACH. PiperOrigin-RevId: 340002915
2020-10-06Implement membarrier(2) commands other than *_SYNC_CORE.Jamie Liu
Updates #267 PiperOrigin-RevId: 335713923
2020-09-28Support inotify in overlayfs.Dean Deng
Fixes #1479, #317. PiperOrigin-RevId: 334258052
2020-08-28Implement StatFS for various VFS2 filesystems.Rahat Mahmood
This mainly involved enabling kernfs' client filesystems to provide a StatFS implementation. Fixes #3411, #3515. PiperOrigin-RevId: 329009864
2020-08-25Expose basic coverage information to userspace through kcov interface.Dean Deng
In Linux, a kernel configuration is set that compiles the kernel with a custom function that is called at the beginning of every basic block, which updates the memory-mapped coverage information. The Go coverage tool does not allow us to inject arbitrary instructions into basic blocks, but it does provide data that we can convert to a kcov-like format and transfer them to userspace through a memory mapping. Note that this is not a strict implementation of kcov, which is especially tricky to do because we do not have the same coverage tools available in Go that that are available for the actual Linux kernel. In Linux, a kernel configuration is set that compiles the kernel with a custom function that is called at the beginning of every basic block to write program counters to the kcov memory mapping. In Go, however, coverage tools only give us a count of basic blocks as they are executed. Every time we return to userspace, we collect the coverage information and write out PCs for each block that was executed, providing userspace with the illusion that the kcov data is always up to date. For convenience, we also generate a unique synthetic PC for each block instead of using actual PCs. Finally, we do not provide thread-specific coverage data (each kcov instance only contains PCs executed by the thread owning it); instead, we will supply data for any file specified by -- instrumentation_filter. Also, fix issue in nogo that was causing pkg/coverage:coverage_nogo compilation to fail. PiperOrigin-RevId: 328426526
2020-08-24Consider loopback bound to all addresses in subnetGhanan Gowripalan
When a loopback interface is configurd with an address and associated subnet, the loopback should treat all addresses in that subnet as an address it owns. This is mimicking linux behaviour as seen below: ``` $ ip addr show dev lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ... link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever $ ping 192.0.2.1 PING 192.0.2.1 (192.0.2.1) 56(84) bytes of data. ^C --- 192.0.2.1 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1018ms $ ping 192.0.2.2 PING 192.0.2.2 (192.0.2.2) 56(84) bytes of data. ^C --- 192.0.2.2 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2039ms $ sudo ip addr add 192.0.2.1/24 dev lo $ ip addr show dev lo 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ... link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet 192.0.2.1/24 scope global lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever $ ping 192.0.2.1 PING 192.0.2.1 (192.0.2.1) 56(84) bytes of data. 64 bytes from 192.0.2.1: icmp_seq=1 ttl=64 time=0.131 ms 64 bytes from 192.0.2.1: icmp_seq=2 ttl=64 time=0.046 ms 64 bytes from 192.0.2.1: icmp_seq=3 ttl=64 time=0.048 ms ^C --- 192.0.2.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2042ms rtt min/avg/max/mdev = 0.046/0.075/0.131/0.039 ms $ ping 192.0.2.2 PING 192.0.2.2 (192.0.2.2) 56(84) bytes of data. 64 bytes from 192.0.2.2: icmp_seq=1 ttl=64 time=0.131 ms 64 bytes from 192.0.2.2: icmp_seq=2 ttl=64 time=0.069 ms 64 bytes from 192.0.2.2: icmp_seq=3 ttl=64 time=0.049 ms 64 bytes from 192.0.2.2: icmp_seq=4 ttl=64 time=0.035 ms ^C --- 192.0.2.2 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3049ms rtt min/avg/max/mdev = 0.035/0.071/0.131/0.036 ms ``` Test: integration_test.TestLoopbackAcceptAllInSubnet PiperOrigin-RevId: 328188546
2020-08-21Move udp port exhaustion tests to a 'nogotsan' one.Ting-Yu Wang
It frequently times out under GoTSAN. PiperOrigin-RevId: 327894343
2020-08-20Enable strace+debug in syscall testsFabricio Voznika
This is done to ease troubleshooting when tests fail. runsc logs are not stored when tests passe, so this will only affect failing tests and should not increase log storage too badly. PiperOrigin-RevId: 327717551
2020-08-19ip6tables: test initial stateKevin Krakauer
Tests that we have the correct initial (empty) state for ip6tables. #3549 PiperOrigin-RevId: 327477657
2020-08-13Disable vfs2 for socket_stress_test.Ayush Ranjan
PiperOrigin-RevId: 326553620
2020-08-10Enable VFS2 by default for all syscall tests.Ayush Ranjan
Fixes #2923 PiperOrigin-RevId: 325904734
2020-08-07Support separate read/write handles in fsimpl/gofer.dentry.Jamie Liu
PiperOrigin-RevId: 325490674
2020-07-24Enable open testAyush Ranjan
Updates #2923 PiperOrigin-RevId: 322953552
2020-07-23Port sendfile to vfs2.Nicolas Lacasse
And do some refactoring of the wait logic in sendfile/splice/tee. Updates #1035 #2923 PiperOrigin-RevId: 322815521
2020-07-09Gate FUSE behind a runsc flagRidwan Sharif
This change gates all FUSE commands (by gating /dev/fuse) behind a runsc flag. In order to use FUSE commands, use the --fuse flag with the --vfs2 flag. Check if FUSE is enabled by running dmesg in the sandbox.
2020-07-07Fix mknod and inotify syscall testAyush Ranjan
This change fixes a few things: - creating sockets using mknod(2) is supported via vfs2 - fsgofer can create regular files via mknod(2) - mode = 0 for mknod(2) will be interpreted as regular file in vfs2 as well Updates #2923 PiperOrigin-RevId: 320074267
2020-07-01Update preadv2/pwritev2 flag handling in vfs2.Dean Deng
We do not support RWF_SYNC/RWF_DSYNC and probably shouldn't silently accept them, since the user may incorrectly believe that we are synchronizing I/O. Remove the pwritev2 test verifying that we support these flags. gvisor.dev/issue/2601 is the tracking bug for deciding which RWF_.* flags we need and supporting them. Updates #2923, #2601. PiperOrigin-RevId: 319351286
2020-07-01[vfs2][gofer] Fix mmap syscall test.Ayush Ranjan
We were not invalidating mappings when the file size changed in shared mode. Enabled the syscall test for vfs2. Updates #2923 PiperOrigin-RevId: 319346569
2020-07-01Port vfs1 implementation of sync_file_range to vfs2.Dean Deng
Currently, we always perform a full-file sync which could be extremely expensive for some applications. Although vfs1 did not fully support sync_file_range, there were some optimizations that allowed us skip some unnecessary write-outs. Updates #2923, #1897. PiperOrigin-RevId: 319324213
2020-07-01Port fallocate to VFS2.Zach Koopmans
PiperOrigin-RevId: 319283715
2020-07-01Complete async signal delivery support in vfs2.Dean Deng
- Support FIOASYNC, FIO{SET,GET}OWN, SIOC{G,S}PGRP (refactor getting/setting owner in the process). - Unset signal recipient when setting owner with pid == 0 and valid owner type. Updates #2923. PiperOrigin-RevId: 319231420
2020-06-27Support sticky bit in vfs2.Dean Deng
Updates #2923. PiperOrigin-RevId: 318648128
2020-06-26IPv6 raw sockets. Needed for ip6tables.Kevin Krakauer
IPv6 raw sockets never include the IPv6 header. PiperOrigin-RevId: 318582989
2020-06-24Fix procfs bugs in vfs2.Dean Deng
- Support writing on proc/[pid]/{uid,gid}map - Return EIO for writing to static files. Updates #2923. PiperOrigin-RevId: 318188503
2020-06-24Port /dev/net/tun device to VFS2.Nicolas Lacasse
Updates #2912 #1035 PiperOrigin-RevId: 318162565
2020-06-23Port /dev/tty device to VFS2.Nicolas Lacasse
Support is limited to the functionality that exists in VFS1. Updates #2923 #1035 PiperOrigin-RevId: 317981417
2020-06-23Port readahead to VFS2.Nicolas Lacasse
It preserves the same functionality (almost none) as in VFS1. Updates #2923 #1035 PiperOrigin-RevId: 317943522
2020-06-22Check for invalid trailing / when traversing path in gofer OpenAt.Dean Deng
Updates #2923. PiperOrigin-RevId: 317700049
2020-06-19Enable passing vfs2 tests.Dean Deng
I forgot to update getdents earlier. Several thousand runs of the fsync and proc_net_unix tests all passed as well. Updates #2923. PiperOrigin-RevId: 317415488
2020-06-19Port fadvise64 to vfs2.Dean Deng
Like vfs1, we have a trivial implementation that ignores all valid advice. Updates #2923. PiperOrigin-RevId: 317349505
2020-06-19Fix vfs2 handling of preadv2/pwritev2 flags.Dean Deng
Check for unsupported flags, and silently support RWF_HIPRI by doing nothing. From pkg/abi/linux/file.go: "gVisor does not implement the RWF_HIPRI feature, but the flag is accepted as a valid flag argument for preadv2/pwritev2." Updates #2923. PiperOrigin-RevId: 317330631
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 02:26:53 +0000