Age | Commit message (Collapse) | Author |
|
Add missing protocol state to TCPINFO struct and update packetimpact.
This re-arranges the TCP state definitions to align with Linux.
Fixes #478
PiperOrigin-RevId: 374996751
|
|
When recovering from a zero-receive-window situation, and asked to
send out an ACK, ensure that we apply SWS avoidance in our window
updates.
Fixes #5984
PiperOrigin-RevId: 373689578
|
|
On receiving an ICMP error during handshake, the error is propagated
by reading `endpoint.lastError`. This can race with the socket layer
invoking getsockopt() with SO_ERROR where the same value is read and
cleared, causing the handshake to bail out with a non-error state.
Fix the race by checking for lastError state and failing the
handshake with ErrConnectionAborted if the lastError was read and
cleared by say SO_ERROR.
The race mentioned in the bug, is caught only with the newly added
tcp_test unit test, where we have control over stopping/resuming
protocol loop. Adding a packetimpact test as well for sanity testing
of ICMP error handling during handshake.
Fixes #5922
PiperOrigin-RevId: 372135662
|
|
PiperOrigin-RevId: 369505182
|
|
PiperOrigin-RevId: 368938936
|
|
- Change the accept queue full condition for a listening endpoint
to only honor completed (and delivered) connections.
- Use syncookies if the number of incomplete connections is beyond
listen backlog. This also cleans up the SynThreshold option code
as that is no longer used with this change.
- Added a new stack option to unconditionally generate syncookies.
Similar to sysctl -w net.ipv4.tcp_syncookies=2 on Linux.
- Enable keeping of incomplete connections beyond listen backlog.
- Drop incoming SYNs only if the accept queue is filled up.
- Drop incoming ACKs that complete handshakes when accept queue is full
- Enable the stack to accept one more connection than programmed by
listen backlog.
- Handle backlog argument being zero, negative for listen, as Linux.
- Add syscall and packetimpact tests to reflect the changes above.
- Remove TCPConnectBacklog test which is polling for completed
connections on the client side which is not reflective of whether
the accept queue is filled up by the test. The modified syscall test
in this CL addresses testing of connecting sockets.
Fixes #3153
PiperOrigin-RevId: 366935921
|
|
Split usermem package to help remove syserror dependency in go_marshal.
New hostarch package contains code not dependent on syserror.
PiperOrigin-RevId: 365651233
|
|
- Don't cleanup containers in Network.Cleanup, otherwise containers will
be killed and removed several times.
- Don't set AutoRemove for containers. This will prevent the confusing
'removal already in progress' messages.
Fixes #3795
PiperOrigin-RevId: 364404414
|
|
The tests were not using the correct windowSize so the testing segments were
actually within the window for seqNumOffset=0 tests. The issue is already fixed
by #5674.
PiperOrigin-RevId: 364252630
|
|
Netstack does not check ACK number for FIN-ACK packets and goes into TIMEWAIT
unconditionally. Fixing the state machine will give us back the retransmission
of FIN.
PiperOrigin-RevId: 363301883
|
|
TCP, in CLOSING state, MUST send an ACK with next expected SEQ number after
receiving any segment with OTW SEQ number and remain in the same state.
While I am here, I also changed shutdown to behave the same as other calls
in posix_server.
PiperOrigin-RevId: 362976955
|
|
The test queries for RTO via TCP_INFO and applies that to the
rest of the test. The RTO is estimated by processing incoming ACK.
There is a race in the test where we may query for RTO before the
incoming ACK was processed. Fix the race in the test by letting the
DUT complete a payload receive, thus estimating RTO before proceeding
to query the RTO. Bump up the time correction to reduce flakes.
PiperOrigin-RevId: 362865904
|
|
By default net.ipv4.ping_group_range is set to "1 0" and no one (even the root)
can create an ICMP socket. Setting it to "0 0" allows root, which we are inside
the container, to create ICMP sockets for packetimpact tests.
PiperOrigin-RevId: 362454201
|
|
- Implement Stringer for it so that we can improve error messages.
- Use TCPFlags through the code base. There used to be a mixed usage of byte,
uint8 and int as TCP flags.
PiperOrigin-RevId: 361940150
|
|
Fix a race where the DUT could send out test data before it received the
peer window advertisement. Such a race results in the DUT taking longer
time to retransmit zero window probe, thus causing the test to fail
receiving the last expected probe.
To ensure this ordering, piggyback a non-zero payload with the zero
window advertisement and let the DUT receive that, before continuing
with the test.
PiperOrigin-RevId: 361640241
|
|
The syscall package has been deprecated in favor of golang.org/x/sys.
Note that syscall is still used in some places because the following don't seem
to have an equivalent in unix package:
- syscall.SysProcIDMap
- syscall.Credential
Updates #214
PiperOrigin-RevId: 361332034
|
|
Some OSs behave slightly differently, but still within the RFC. It can be useful
to have access to uname information from the testbench.
PiperOrigin-RevId: 361193766
|
|
One of the preparation to decouple underlying buffer implementation.
There are still some methods that tie to VectorisedView, and they will be
changed gradually in later CLs.
This CL also introduce a new ICMPv6ChecksumParams to replace long list of
parameters when calling ICMPv6Checksum, aiming to be more descriptive.
PiperOrigin-RevId: 360778149
|
|
- Removed (*testbench.Connection)(&conn) like casts
- Removed redundant definition of Drain, Close and ExpectFrame
PiperOrigin-RevId: 360727788
|
|
Without this change, the error produced is quite useless:
--- FAIL: TestZeroWindowProbeRetransmit (11.44s)
tcp_zero_window_probe_retransmit_test.go:81: expected a probe with sequence number 824638527212: loop 5
FAIL
PiperOrigin-RevId: 359796370
|
|
- open flags can be different on different OSs, by putting SetNonblocking into
the posix_server rather than the testbench, we can always get the right value
for O_NONBLOCK
- merged the tcp_queue_{send,receive}_in_syn_sent into a single file
PiperOrigin-RevId: 359620630
|
|
Remove unused argument while I'm here and avoid returning
syscall.Errno(0) which should rather be a nil error.
PiperOrigin-RevId: 358227396
|
|
Previously, we make two connect attempts. If the first attempt is still on
going when the second attempt is made, the test will fail. This change deflakes
the situation by not making the second attempt, instead, we poll for the first
attempt's completion and read the errno from SO_ERROR.
PiperOrigin-RevId: 358104769
|
|
- TCP_INFO is used to get the RTO instead of calculating it manually.
PiperOrigin-RevId: 358032487
|
|
- Wrap comments at 80 columns
- Avoid duplicating the number of retries (5)
- Reduce indentation
- Use (*testing.T).Fatal rather than (*testing.T).Fatalf
PiperOrigin-RevId: 358017412
|
|
Remove flaky tcp_reordering_test as it does not check reordering. We have
added new reorder tests in tcp_rack_test.go
PiperOrigin-RevId: 357278769
|
|
Deflake this test by retransmitting the ACK and retrying RST
expectation after the supposed state transition to CLOSED.
This gives time for the state transition to complete.
Without such a retransmit from the test, the ACK could get silently
dropped by the listener when the passively connecting endpoint
has not yet completely updated the state (in gVisor this would be
endpoint state and decrement of synRcvdCount).
PiperOrigin-RevId: 356825562
|
|
The test will sometimes fail on Bind calls using the old RPCTimeout.
PiperOrigin-RevId: 356646668
|
|
PiperOrigin-RevId: 355645297
|
|
Netstack today will send dupACK's with no rate limit for incoming out of
window segments. This can result in ACK loops for example if a TCP socket
connects to itself (actually permitted by TCP). Where the ACK sent in
response to packets being out of order itself gets considered as an out
of window segment resulting in another ACK being generated.
PiperOrigin-RevId: 355206877
|
|
PiperOrigin-RevId: 355067082
|
|
...to prevent panicking in case of failure.
PiperOrigin-RevId: 354970257
|
|
When these specific tests were first added, they would fail when ran by
kokoro during the presubmit tests (but they always passed locally).
These tests are now passing, so they can be re-enabled. Unclear what
changed, one hypothesis is the move from kokoro to buildkite.
Fixes #4971
PiperOrigin-RevId: 354425395
|
|
There used to be a race condition where we may call Close before the connection
is established. Adding poll support so that we can eliminate this kind of race.
Startblock:
has LGTM from iyerm
and then
add reviewer tamird
PiperOrigin-RevId: 354369130
|
|
Previously, sending on an unconnected UDP socket would ignore the
SO_BINDTODEVICE option. Send on the configured interface when an UDP socket
is bound to an interface through setsockop SO_BINDTODEVICE.
Add packetimpact tests exercising UDP reads and writes with every combination
of bound/unbound, broadcast/multicast/unicast destination, and bound/not-bound
to device.
PiperOrigin-RevId: 354299670
|
|
This CL adds support for the following fields:
- RTT, RTTVar, RTO
- send congestion window (sndCwnd) and send slow start threshold (sndSsthresh)
- congestion control state(CaState)
- ReorderSeen
PiperOrigin-RevId: 354195361
|
|
Fix the test to rely on more deterministic retransmission interval
computations by skipping the initial probe transmission time as that
can be non-deterministic given arbitrary time taken for the DUT to
receive a send command and initiate a send.
Fixes #5080
PiperOrigin-RevId: 354146256
|
|
- Added packetimpact tests for RACK.
PiperOrigin-RevId: 353282342
|
|
These are primarily simplification and lint mistakes. However, minor
fixes are also included and tests added where appropriate.
PiperOrigin-RevId: 351425971
|
|
This includes minor fix-ups:
* Handle SIGTERM in runsc debug, to exit gracefully.
* Fix cmd.debug.go opening all profiles as RDONLY.
* Fix the test name in fio_test.go, and encode the block size in the test.
PiperOrigin-RevId: 350205718
|
|
When the scaled receive window size > 65535 (max uint16), we advertise
the scaled value as 65535, but are not adjusting the saved receive
window value when doing so. This would keep our current window
calculation logic to be incorrect, as the saved receive window value
is different from what was advertised.
Fixes #4903
PiperOrigin-RevId: 347771340
|
|
Adds IPv6 extension header serializer and Hop by Hop options serializer.
Add RouterAlert option serializer and use it in MLD.
Fixed #4996
Startblock:
has LGTM from marinaciocea
and then
add reviewer ghanan
PiperOrigin-RevId: 347174537
|
|
Without this change, this test produces quite opaque errors as valid TCP
segments are not logged; what we see in the end is any random traffic that
happened *after* the final TCP segment.
PiperOrigin-RevId: 346864169
|
|
PiperOrigin-RevId: 346852543
|
|
PiperOrigin-RevId: 346840424
|
|
PiperOrigin-RevId: 346818310
|
|
Recursive make is difficult to follow and debug. Drop this by using
internal functions, which, while difficult, are easier than trying to
following recursive invokations.
Further simplify the Makefile by collapsing the image bits and removing
the tools/vm directory, which is effectively unused.
Fixes #4952
PiperOrigin-RevId: 346569133
|
|
PiperOrigin-RevId: 346487763
|
|
Prior to this change tcpdump would fail to create its output file
because the destination directory was owned by root. This would later
cause killall to fail, as tcpdump was not running. Check exit code of
tcpdump/tshark to produce better error messages should this regress.
PiperOrigin-RevId: 346353911
|
|
Avoid action at a distance where both `snifferArgs` and `snifferProg`
must stay in sync.
PiperOrigin-RevId: 346341231
|