summaryrefslogtreecommitdiffhomepage
path: root/test/packetimpact
AgeCommit message (Collapse)Author
2020-11-23[1/3] Support isolated containers for parallel packetimpact testsZeling Feng
Summary of the approach: the test runner will set up a few DUTs according to a flag and pass all the test networks to the testbench. The testbench will only reside in a single container. The testbench will put all the test networks into a buffered channel which served as a semaphore and now the user can freely use t.Parallel() in (sub)tests and the true parallelism will be determined by how many DUTs are configured. Creating DUTs on demand is not supported yet, the test author should determine the number of DUTs to be used statically. Specifically in this change: - Don't export any global variables about the test network in testbench. - Sniffer only binds on the local interface because it will be possible to have multiple interfaces to multiple DUTs in a single testbench container. - Migrate existing tests to stop using global variables. PiperOrigin-RevId: 343965962
2020-11-19Don't hold AddressEndpoints for multicast addressesGhanan Gowripalan
Group addressable endpoints can simply check if it has joined the multicast group without maintaining address endpoints. This also helps remove the dependency on AddressableEndpoint from GroupAddressableEndpoint. Now that group addresses are not tracked with address endpoints, we can avoid accidentally obtaining a route with a multicast local address. PiperOrigin-RevId: 343336912
2020-11-18Remove the redundant containerIP parameterZeling Feng
PiperOrigin-RevId: 343144023
2020-11-16Add packetimpact tests for ICMPv6 Error message for fragmentToshi Kikuchi
Updates #4427 PiperOrigin-RevId: 342703931
2020-11-13Requested Comment/Message wording changesJulian Elischer
PiperOrigin-RevId: 342366891
2020-11-12Change AllocationSize to SizeWithPadding as requestedJulian Elischer
RELNOTES: n/a PiperOrigin-RevId: 342176296
2020-11-11Teach netstack how to add options to IPv4 packetsJulian Elischer
Most packets don't have options but they are an integral part of the standard. Teaching the ipv4 code how to handle them will simplify future testing and use. Because Options are so rare it is worth making sure that the extra work is kept out of the fast path as much as possible. Prior to this change, all usages of the IHL field of the IPv4Fields/Encode system set it to the same constant value except in a couple of tests for bad values. From this change IHL will not be a constant as it will depend on the size of any Options. Since ipv4.Encode() now handles the options it becomes a possible source of errors to let the callers set this value, so remove it entirely and calculate the value from the size of the Options if present (or not) therefore guaranteeing a correct value. Fixes #4709 RELNOTES: n/a PiperOrigin-RevId: 341864765
2020-11-09Additions to ICMP and IPv4 parsersJulian Elischer
Teach ICMP.Parser/ToBytes to handle some non echo ICMP packets. Teach IPv4.Parser that fragments only have a payload, not an upper layer. Fix IPv4 and IPv6 reassembly tests to handle the change. Fixes #4758 PiperOrigin-RevId: 341549665
2020-11-09parameterize regexp in netdevs.ParseDevicesZeling Feng
PiperOrigin-RevId: 341470647
2020-11-04Make the regex for inet6Line in packetimpact/netdevs more accurateZeling Feng
PiperOrigin-RevId: 340763455
2020-10-29Add IPv4 reassembly packetimpact testArthur Sfez
The IPv6 reassembly test was also refactored to be easily extended with more cases. PiperOrigin-RevId: 339768605
2020-10-29Add support for bare IPv4 in packetimpact testsArthur Sfez
PiperOrigin-RevId: 339699771
2020-10-28Add the payload directly to the ICMPv4 typeArthur Sfez
This makes handling inbound fragmented packets easier, because a fragmented packet might not have an actual ICMP header but only a payload. After this change, the ICMPv4 is the last layer you can get because the payload is embedded in it. Note that this makes it consistent with the ICMPv6 implementation. While I'm here, I've also added the Ident and Sequence fields on the ICMPv4 type. Defaults are still zero. PiperOrigin-RevId: 339577094
2020-10-28Bump honnef.co/go/tools to v0.0.1-2020.1.6Ting-Yu Wang
PiperOrigin-RevId: 339476515
2020-10-15Syncing packetimpact tests in different directoriesZeling Feng
By exposing an ALL_TESTS list in defs.bzl we can make sure all packetimpact users get to agree on the list of all tests. A defect in this approach is that we have to keep a list of packetimpact_testbench rules in the BUILD file. An helper validate_all_tests has been added to help keep BUILD and .bzl files in sync. PiperOrigin-RevId: 337411839
2020-10-09Set expect_failure flags on tests that currently fails on fuchsiaZeling Feng
PiperOrigin-RevId: 336350318
2020-10-07Add staticcheck and staticstyle analyzers.Adin Scannell
This change also adds support to go_stateify for detecting an appropriate receiver name, avoiding a large number of false positives. PiperOrigin-RevId: 335994587
2020-10-06Add support for IPv6 fragmentationArthur Sfez
Most of the IPv4 fragmentation code was moved in the fragmentation package and it is reused by IPv6 fragmentation. Test: - pkg/tcpip/network/ipv4:ipv4_test - pkg/tcpip/network/ipv6:ipv6_test - pkg/tcpip/network/fragmentation:fragmentation_test Fixes #4389 PiperOrigin-RevId: 335714280
2020-09-28Fix lingering of TCP socket in the initial state.Nayana Bidari
When the socket is set with SO_LINGER and close()'d in the initial state, it should not linger and return immediately. PiperOrigin-RevId: 334263149
2020-09-24Change segment/pending queue to use receive buffer limits.Bhasker Hariharan
segment_queue today has its own standalone limit of MaxUnprocessedSegments but this can be a problem in UnlockUser() we do not release the lock till there are segments to be processed. What can happen is as handleSegments dequeues packets more keep getting queued and we will never release the lock. This can keep happening even if the receive buffer is full because nothing can read() till we release the lock. Further having a separate limit for pending segments makes it harder to track memory usage etc. Unifying the limits makes it easier to reason about memory in use and makes the overall buffer behaviour more consistent. PiperOrigin-RevId: 333508122
2020-09-23Clean up flag.* usage in packetimpact's runner.RegisterFlagsZeling Feng
PiperOrigin-RevId: 333400865
2020-09-18Enqueue TCP sends arriving in SYN_SENT state.Mithun Iyer
TCP needs to enqueue any send requests arriving when the connection is in SYN_SENT state. The data should be sent out soon after completion of the connection handshake. Fixes #3995 PiperOrigin-RevId: 332482041
2020-09-16Cleanup device name confusion in packetimpact testbenchZeling Feng
There are two device names on the test net. - The sniffer/injector device which is always a linux device. Only the testbench library is interested in this device. - The device which is on the DUT. It happens to be the same device as the former if DUT is linux. An individual test might be interested in this device if the test cares about the device name. PiperOrigin-RevId: 332112968
2020-09-16Automated rollback of changelist 329526153Nayana Bidari
PiperOrigin-RevId: 332097286
2020-09-14Test RST handling in TIME_WAIT.Mithun Iyer
gVisor stack ignores RSTs when in TIME_WAIT which is not the default Linux behavior. Add a packetimpact test to test the same. Also update code comments to reflect the rationale for the current gVisor behavior. PiperOrigin-RevId: 331629879
2020-09-11Use correct test device name in Fuchsia packetimpactAmanda Tait
Packetimpact on Fuchsia was formerly using the Linux test device name. This change fixes that. PiperOrigin-RevId: 331211518
2020-09-03Avoid grpc_implTamir Duberstein
PiperOrigin-RevId: 329902747
2020-09-02Add support to run packetimpact tests against FuchsiaZeling Feng
blaze test <test_name>_fuchsia_test will run the corresponding packetimpact test against fuchsia. PiperOrigin-RevId: 329835290
2020-09-01Fix handling of unacceptable ACKs during close.Mithun Iyer
On receiving an ACK with unacceptable ACK number, in a closing state, TCP, needs to reply back with an ACK with correct seq and ack numbers and remain in same state. This change is as per RFC793 page 37, but with a difference that it does not apply to ESTABLISHED state, just as in Linux. Also add more tests to check for OTW sequence number and unacceptable ack numbers in these states. Fixes #3785 PiperOrigin-RevId: 329616283
2020-09-01Automated rollback of changelist 328350576Nayana Bidari
PiperOrigin-RevId: 329526153
2020-08-31Set errno on response when syscall actually failsJay Zhuang
This prevents setting stale errno on responses. Also fixes TestDiscardsUDPPacketsWithMcastSourceAddressV6 to use correct multicast addresses in test. Fixes #3793 PiperOrigin-RevId: 329391155
2020-08-28Include command output on errorTamir Duberstein
Currently the logs produce TestOne: packetimpact_test.go:182: listing devices on ... container: process terminated with status: 126 which is not actionable; presumably the `ip` command output is interesting. PiperOrigin-RevId: 329032105
2020-08-25Add nogo support to go_binary and go_test targets.Adin Scannell
Updates #3374 PiperOrigin-RevId: 328378700
2020-08-25Support SO_LINGER socket option.Nayana Bidari
When SO_LINGER option is enabled, the close will not return until all the queued messages are sent and acknowledged for the socket or linger timeout is reached. If the option is not set, close will return immediately. This option is mainly supported for connection oriented protocols such as TCP. PiperOrigin-RevId: 328350576
2020-08-24Internal change.gVisor bot
PiperOrigin-RevId: 328157101
2020-08-14Update README for packetimpactNayana Bidari
PiperOrigin-RevId: 326733912
2020-08-14Give the ICMP Code its own typeJulian Elischer
This is a preparatory commit for a larger commit working on ICMP generation in error cases. This is removal of technical debt and cleanup in the gvisor code as part of gvisor issue 2211. Updates #2211. PiperOrigin-RevId: 326615389
2020-08-06Add bzl_library rules for .bzl files without one.Adin Scannell
PiperOrigin-RevId: 325280924
2020-08-06Merge pull request #3511 from amscanne:packetimpact-testsgVisor bot
PiperOrigin-RevId: 325269275
2020-08-06Join IPv4 all-systems group on NIC enableGhanan Gowripalan
Test: - stack_test.TestJoinLeaveMulticastOnNICEnableDisable - integration_test.TestIncomingMulticastAndBroadcast PiperOrigin-RevId: 325185259
2020-08-04Enable "make packetimpact-tests" to work.Adin Scannell
This required minor fixes to the bazel wrapper. The "dut_platform" is also changed to "native" to line-up with the system call tests and remove the hard-coded "linux" and "netstack" strings.
2020-07-29Test UDP socket bound to ANY can receive unicastJay Zhuang
PiperOrigin-RevId: 323773771
2020-07-28More test cases on receiving UDP mcast/bcastJay Zhuang
PiperOrigin-RevId: 323553832
2020-07-27Ask for *testing.T instead of storing itJay Zhuang
Storing *testing.T on test helper structs is problematic when subtests are used, because it is possible for nested tests to call Fatal on parent test, which incorrect terminates the parent test. For example func TestOuter(t *testing.T) { dut := NewDUT(t) t.Run("first test", func(t *testing.T) { dut.FallibleCall() }) t.Run("second test", func(t *testing.T) { dut.FallibleCall() } } In the example above, assuming `FallibleCall` calls `t.Fatal` on the `t` it holds, if `dut.FallibleCall` fails in "first test", it will call `Fatal` on the parent `t`, quitting `TestOuter`. This is not a behavior we want. PiperOrigin-RevId: 323350241
2020-07-26Add profiling to dockerutilZach Koopmans
Adds profiling with `runsc debug` or pprof to dockerutil. All targets using dockerutil should now be able to use profiling. In addition, modifies existing benchmarks to use profiling. PiperOrigin-RevId: 323298634
2020-07-22make connect(2) fail when dest is unreachableKevin Krakauer
Previously, ICMP destination unreachable datagrams were ignored by TCP endpoints. This caused connect to hang when an intermediate router couldn't find a route to the host. This manifested as a Kokoro error when Docker IPv6 was enabled. The Ruby image test would try to install the sinatra gem and hang indefinitely attempting to use an IPv6 address. Fixes #3079.
2020-07-20Add standard entrypoints for test targets.Adin Scannell
PiperOrigin-RevId: 322265513
2020-07-17DUT logs in test failure messages in packetimpactJay Zhuang
DUT logs will include logs from the posix server and gVisor, which provides a way to instrument the DUT during test failures. PiperOrigin-RevId: 321816647
2020-07-17Test UDP packets with mcast source addr are discardedJay Zhuang
PiperOrigin-RevId: 321790802
2020-07-14Test IPv6 fragment reassemblyZeling Feng
A packetimpact test for: "A node must be able to accept a fragmented packet that, after reassembly, is as large as 1500 octets." PiperOrigin-RevId: 321210729
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 06:35:27 +0000