Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 381515399
|
|
PiperOrigin-RevId: 381508674
|
|
These aren't useful and create opportunities for flakes.
PiperOrigin-RevId: 380889223
|
|
This test checks if an incoming ACK is dropped by the listener when the
accept queue is full. The ACK receive handling could race with the test
invoking accept on the DUT, causing the test to be flaky. Add a wait
time before invoking accept on the DUT to give cycles for the incoming
ACK to be handled/dropped by the listener.
PiperOrigin-RevId: 378770225
|
|
The bug id was not adding anything relevant here
PiperOrigin-RevId: 378485983
|
|
If the ACK completing the handshake has FIN or data, requeue the segment
for further processing by the newly established endpoint. Otherwise,
the segments would have to be retransmitted by the peer to be processed
by the established endpoint. Doing this, keeps the behavior in parity
with Linux.
This also addresses a test flake with TCPNonBlockingConnectClose where
the ACK (completing the handshake) and multiple retransmitted FINACKs
from the peer could be dropped by the listener, when using syncookies
and the accept queue is full. The handshake could eventually get
completed with a retransmitted FINACK, without actual processing of
FIN. This can cause the poll with POLLRDHUP on the accepted socket to
sometimes time out before the next FINACK retransmission.
PiperOrigin-RevId: 377651695
|
|
Forwards the testing verbose flag to the packetimpact test runner. This is
necessary for debugging inside packetimpact tests. When this flag is present,
all t.Logs in the packetimpact test wil be shown in the resulting test output.
PiperOrigin-RevId: 377614550
|
|
Fixes the erronously signaled fatal error when the sniffer receive timeout
duration is less than one usec. This was caused by the converstion from float64
to int64; the integer conversion truncated the floating point to 0, which
signaled the fatal error.
PiperOrigin-RevId: 377600179
|
|
The current implementation has a bug where TCP listener does not ignore
RSTs from the peer. While handling RST+ACK from the peer, this bug can
complete handshakes that use syncookies. This results in half-open
connection delivered to the accept queue.
Fixes #6076
PiperOrigin-RevId: 376868749
|
|
Adds support for the SO_BINDTODEVICE socket option in ICMP sockets with an
accompanying packetimpact test to exercise use of this socket option.
Adds a unit test to exercise the NIC selection logic introduced by this change.
The remaining unit tests for ICMP sockets need to be added in a subsequent CL.
See https://gvisor.dev/issues/5623 for the list of remaining unit tests.
Adds a "timeout" field to PacketimpactTestInfo, necessary due to the long
runtime of the newly added packetimpact test.
Fixes #5678
Fixes #4896
Updates #5623
Updates #5681
Updates #5763
Updates #5956
Updates #5966
Updates #5967
PiperOrigin-RevId: 376271581
|
|
Moves specification of subsequent layers to the Payload field of the ICMP and
ICMPv6 layers.
Removes the need to manually encode type-specific ICMP or ICMPv6 headers, such
as the "pointer" header of parameter problem messages, in the payload. This is
necessary prework to enable matching of more type-specific headers, such as
"ident" of echo requests.
Fixes a bug where the "reserved" header defined by ICMPv6 RFC 4443 was being
incorrectly encoded by ToBytes. This change fixes the implementation by copying
the payload into Payload, instead of the MessageBody.
PiperOrigin-RevId: 376026420
|
|
Add missing protocol state to TCPINFO struct and update packetimpact.
This re-arranges the TCP state definitions to align with Linux.
Fixes #478
PiperOrigin-RevId: 374996751
|
|
When recovering from a zero-receive-window situation, and asked to
send out an ACK, ensure that we apply SWS avoidance in our window
updates.
Fixes #5984
PiperOrigin-RevId: 373689578
|
|
On receiving an ICMP error during handshake, the error is propagated
by reading `endpoint.lastError`. This can race with the socket layer
invoking getsockopt() with SO_ERROR where the same value is read and
cleared, causing the handshake to bail out with a non-error state.
Fix the race by checking for lastError state and failing the
handshake with ErrConnectionAborted if the lastError was read and
cleared by say SO_ERROR.
The race mentioned in the bug, is caught only with the newly added
tcp_test unit test, where we have control over stopping/resuming
protocol loop. Adding a packetimpact test as well for sanity testing
of ICMP error handling during handshake.
Fixes #5922
PiperOrigin-RevId: 372135662
|
|
PiperOrigin-RevId: 369505182
|
|
PiperOrigin-RevId: 368938936
|
|
- Change the accept queue full condition for a listening endpoint
to only honor completed (and delivered) connections.
- Use syncookies if the number of incomplete connections is beyond
listen backlog. This also cleans up the SynThreshold option code
as that is no longer used with this change.
- Added a new stack option to unconditionally generate syncookies.
Similar to sysctl -w net.ipv4.tcp_syncookies=2 on Linux.
- Enable keeping of incomplete connections beyond listen backlog.
- Drop incoming SYNs only if the accept queue is filled up.
- Drop incoming ACKs that complete handshakes when accept queue is full
- Enable the stack to accept one more connection than programmed by
listen backlog.
- Handle backlog argument being zero, negative for listen, as Linux.
- Add syscall and packetimpact tests to reflect the changes above.
- Remove TCPConnectBacklog test which is polling for completed
connections on the client side which is not reflective of whether
the accept queue is filled up by the test. The modified syscall test
in this CL addresses testing of connecting sockets.
Fixes #3153
PiperOrigin-RevId: 366935921
|
|
Split usermem package to help remove syserror dependency in go_marshal.
New hostarch package contains code not dependent on syserror.
PiperOrigin-RevId: 365651233
|
|
- Don't cleanup containers in Network.Cleanup, otherwise containers will
be killed and removed several times.
- Don't set AutoRemove for containers. This will prevent the confusing
'removal already in progress' messages.
Fixes #3795
PiperOrigin-RevId: 364404414
|
|
The tests were not using the correct windowSize so the testing segments were
actually within the window for seqNumOffset=0 tests. The issue is already fixed
by #5674.
PiperOrigin-RevId: 364252630
|
|
Netstack does not check ACK number for FIN-ACK packets and goes into TIMEWAIT
unconditionally. Fixing the state machine will give us back the retransmission
of FIN.
PiperOrigin-RevId: 363301883
|
|
TCP, in CLOSING state, MUST send an ACK with next expected SEQ number after
receiving any segment with OTW SEQ number and remain in the same state.
While I am here, I also changed shutdown to behave the same as other calls
in posix_server.
PiperOrigin-RevId: 362976955
|
|
The test queries for RTO via TCP_INFO and applies that to the
rest of the test. The RTO is estimated by processing incoming ACK.
There is a race in the test where we may query for RTO before the
incoming ACK was processed. Fix the race in the test by letting the
DUT complete a payload receive, thus estimating RTO before proceeding
to query the RTO. Bump up the time correction to reduce flakes.
PiperOrigin-RevId: 362865904
|
|
By default net.ipv4.ping_group_range is set to "1 0" and no one (even the root)
can create an ICMP socket. Setting it to "0 0" allows root, which we are inside
the container, to create ICMP sockets for packetimpact tests.
PiperOrigin-RevId: 362454201
|
|
- Implement Stringer for it so that we can improve error messages.
- Use TCPFlags through the code base. There used to be a mixed usage of byte,
uint8 and int as TCP flags.
PiperOrigin-RevId: 361940150
|
|
Fix a race where the DUT could send out test data before it received the
peer window advertisement. Such a race results in the DUT taking longer
time to retransmit zero window probe, thus causing the test to fail
receiving the last expected probe.
To ensure this ordering, piggyback a non-zero payload with the zero
window advertisement and let the DUT receive that, before continuing
with the test.
PiperOrigin-RevId: 361640241
|
|
The syscall package has been deprecated in favor of golang.org/x/sys.
Note that syscall is still used in some places because the following don't seem
to have an equivalent in unix package:
- syscall.SysProcIDMap
- syscall.Credential
Updates #214
PiperOrigin-RevId: 361332034
|
|
Some OSs behave slightly differently, but still within the RFC. It can be useful
to have access to uname information from the testbench.
PiperOrigin-RevId: 361193766
|
|
One of the preparation to decouple underlying buffer implementation.
There are still some methods that tie to VectorisedView, and they will be
changed gradually in later CLs.
This CL also introduce a new ICMPv6ChecksumParams to replace long list of
parameters when calling ICMPv6Checksum, aiming to be more descriptive.
PiperOrigin-RevId: 360778149
|
|
- Removed (*testbench.Connection)(&conn) like casts
- Removed redundant definition of Drain, Close and ExpectFrame
PiperOrigin-RevId: 360727788
|
|
Without this change, the error produced is quite useless:
--- FAIL: TestZeroWindowProbeRetransmit (11.44s)
tcp_zero_window_probe_retransmit_test.go:81: expected a probe with sequence number 824638527212: loop 5
FAIL
PiperOrigin-RevId: 359796370
|
|
- open flags can be different on different OSs, by putting SetNonblocking into
the posix_server rather than the testbench, we can always get the right value
for O_NONBLOCK
- merged the tcp_queue_{send,receive}_in_syn_sent into a single file
PiperOrigin-RevId: 359620630
|
|
Remove unused argument while I'm here and avoid returning
syscall.Errno(0) which should rather be a nil error.
PiperOrigin-RevId: 358227396
|
|
Previously, we make two connect attempts. If the first attempt is still on
going when the second attempt is made, the test will fail. This change deflakes
the situation by not making the second attempt, instead, we poll for the first
attempt's completion and read the errno from SO_ERROR.
PiperOrigin-RevId: 358104769
|
|
- TCP_INFO is used to get the RTO instead of calculating it manually.
PiperOrigin-RevId: 358032487
|
|
- Wrap comments at 80 columns
- Avoid duplicating the number of retries (5)
- Reduce indentation
- Use (*testing.T).Fatal rather than (*testing.T).Fatalf
PiperOrigin-RevId: 358017412
|
|
Remove flaky tcp_reordering_test as it does not check reordering. We have
added new reorder tests in tcp_rack_test.go
PiperOrigin-RevId: 357278769
|
|
Deflake this test by retransmitting the ACK and retrying RST
expectation after the supposed state transition to CLOSED.
This gives time for the state transition to complete.
Without such a retransmit from the test, the ACK could get silently
dropped by the listener when the passively connecting endpoint
has not yet completely updated the state (in gVisor this would be
endpoint state and decrement of synRcvdCount).
PiperOrigin-RevId: 356825562
|
|
The test will sometimes fail on Bind calls using the old RPCTimeout.
PiperOrigin-RevId: 356646668
|
|
PiperOrigin-RevId: 355645297
|
|
Netstack today will send dupACK's with no rate limit for incoming out of
window segments. This can result in ACK loops for example if a TCP socket
connects to itself (actually permitted by TCP). Where the ACK sent in
response to packets being out of order itself gets considered as an out
of window segment resulting in another ACK being generated.
PiperOrigin-RevId: 355206877
|
|
PiperOrigin-RevId: 355067082
|
|
...to prevent panicking in case of failure.
PiperOrigin-RevId: 354970257
|
|
When these specific tests were first added, they would fail when ran by
kokoro during the presubmit tests (but they always passed locally).
These tests are now passing, so they can be re-enabled. Unclear what
changed, one hypothesis is the move from kokoro to buildkite.
Fixes #4971
PiperOrigin-RevId: 354425395
|
|
There used to be a race condition where we may call Close before the connection
is established. Adding poll support so that we can eliminate this kind of race.
Startblock:
has LGTM from iyerm
and then
add reviewer tamird
PiperOrigin-RevId: 354369130
|
|
Previously, sending on an unconnected UDP socket would ignore the
SO_BINDTODEVICE option. Send on the configured interface when an UDP socket
is bound to an interface through setsockop SO_BINDTODEVICE.
Add packetimpact tests exercising UDP reads and writes with every combination
of bound/unbound, broadcast/multicast/unicast destination, and bound/not-bound
to device.
PiperOrigin-RevId: 354299670
|
|
This CL adds support for the following fields:
- RTT, RTTVar, RTO
- send congestion window (sndCwnd) and send slow start threshold (sndSsthresh)
- congestion control state(CaState)
- ReorderSeen
PiperOrigin-RevId: 354195361
|
|
Fix the test to rely on more deterministic retransmission interval
computations by skipping the initial probe transmission time as that
can be non-deterministic given arbitrary time taken for the DUT to
receive a send command and initiate a send.
Fixes #5080
PiperOrigin-RevId: 354146256
|
|
- Added packetimpact tests for RACK.
PiperOrigin-RevId: 353282342
|
|
These are primarily simplification and lint mistakes. However, minor
fixes are also included and tests added where appropriate.
PiperOrigin-RevId: 351425971
|