summaryrefslogtreecommitdiffhomepage
path: root/test/packetimpact
AgeCommit message (Collapse)Author
2020-07-03Improve failure messageTamir Duberstein
Currently this test produces an error resembling tcp_zero_window_probe_retransmit_test.go:92: zero probe came sooner interval 3200179405 probe 4 which is approximately useless. PiperOrigin-RevId: 319572263
2020-07-03Update build rule to appease deprecationTamir Duberstein
Before this change, running packetimpact tests produces: parameter 'direct' must contain a list of elements, and may no longer accept a depset. The deprecated behavior may be temporarily re-enabled by setting --incompatible_disable_depset_inputs=false The positional parameter to depset has been changed to mean `direct` rather than its previous meaning of `items`. The documentation[0] explains: A positional parameter distinct from other parameters for legacy support. If --incompatible_disable_depset_items is false, this parameter serves as the value of items. If --incompatible_disable_depset_items is true, this parameter serves as the value of direct. See the documentation for these parameters for more details. [0] https://docs.bazel.build/versions/master/skylark/lib/globals.html PiperOrigin-RevId: 319555138
2020-07-01TCP receive should block when in SYN-SENT state.Mithun Iyer
The application can choose to initiate a non-blocking connect and later block on a read, when the endpoint is still in SYN-SENT state. PiperOrigin-RevId: 319311016
2020-06-30Fix two bugs in TCP sender.Bhasker Hariharan
a) When GSO is in use we should not cap the segment to maxPayloadSize in sender.maybeSendSegment as the GSO logic will cap the segment to the correct size. Without this the host GSO is not used as we end up breaking up large segments into small MSS sized segments before writing the packets to the host. b) The check to not split a segment due to it not fitting in the receiver window when there are pending segments is incorrect as segments in writeList can be really large as we just take the write call's buffer size and create a single large segment. So a write of say 128KB will just be 1 segment in the writeList. The linux code checks if 1 MSS sized segments fits in the receiver's window and if not then does not split the current segment. gVisor's check was incorrect that it was checking if the whole segment which could be >>> 1 MSS would fit in the receiver's window. This was causing us to prematurely stop sending and falling back to retransmit timer/probe from the other end to send data. This was seen when running HTTPD benchmarks where @ HEAD when sending large files the benchmark was taking forever to run. The tcp_splitseg_mss_test.go is being deleted as the test as written doesn't test what is intended correctly. This is because GSO is enabled by default and the reason the MSS+1 sized segment is sent is because GSO is in use. A proper test will require disabling GSO on linux and netstack which is going to take a bit of work in packetimpact to do it correctly. Separately a new test probably should be written that verifies that a segment > availableWindow is not split if the availableWindow is < 1 MSS. Fixes #3107 PiperOrigin-RevId: 319172089
2020-06-26Packetimpact test for IPv6 unknown options actionZeling Feng
The Option Type identifiers are internally encoded such that their highest-order two bits specify the action that must be taken if the processing IPv6 node does not recognize the Option Type: 00 - skip over this option and continue processing the header. 01 - discard the packet. 10 - discard the packet and, regardless of whether or not the packet's Destination Address was a multicast address, send an ICMP Parameter Problem, Code 2, message to the packet's Source Address, pointing to the unrecognized Option Type. 11 - discard the packet and, only if the packet's Destination Address was not a multicast address, send an ICMP Parameter Problem, Code 2, message to the packet's Source Address, pointing to the unrecognized Option Type. PiperOrigin-RevId: 318566613
2020-06-26Support IPv6 extension headers in packetimpact tests.Zeling Feng
- IPv6 HopByHop Options Extension Header - IPv6 Destination Options Extension Header PiperOrigin-RevId: 318551425
2020-06-17Move mount configutation to RunOptsFabricio Voznika
Separate mount configuration from links and move it to RunOpts, like the other options. PiperOrigin-RevId: 317010158
2020-06-15TCP to honor updated window size during handshake.Mithun Iyer
In passive open cases, we transition to Established state after initializing endpoint's sender and receiver. With this we lose out on any updates coming from the ACK that completes the handshake. This change ensures that we uniformly transition to Established in all cases and does minor cleanups. Fixes #2938 PiperOrigin-RevId: 316567014
2020-06-12Make GenerateRandomPayload available to all testsTony Gong
Moved the function for generating a payload of random byets of a specified length into the testbench package so that it's availbale for all tests to use. Added a test case to the IPv4 ID uniqueness test which uses a payload length of 512 bytes. This test case passes for gVisor currently, whereas the test case with a small payload of 11 bytes fails because gVisor only assigns the ID field if the IP payload is sufficiently large. PiperOrigin-RevId: 316185097
2020-06-11Replace use of %v in packetimpact testsMithun Iyer
PiperOrigin-RevId: 316027588
2020-06-11Add test for reordering.Ian Gudger
Tests the effect of reordering on retransmission and window size. Test covers the expected behavior of both Linux and netstack, however, netstack does not behave as expected. Further, the current expected behavior of netstack is not ideal and should be adjusted in the future. PiperOrigin-RevId: 316015184
2020-06-11Refactor packetimpact Connection typesgVisor bot
Reorganize the Connection types such that the defined types no longer expose the lower-level functions SendFrame and CreateFrame. These methods are still exported on the underlying Connection type, and thus can be accessed via a type-cast. In future, defined types should have one or more type-safe versions of the send() method on Connection, e.g. UDPIPv4 has Send() which allows the UDP header to be overridden and SendIP() which allows both the IPv4 and UDP headers to be modified. testbench.Connection gets a SendFrameStateless method which sends frames without updating the state of any of the layers. This should be used when sending out-of-band control messages such as ICMP messages, as using the normal Send method can result in errors when attempting to update the TCP state using an ICMP packet. Also remove the localAddr field of testbench.Connection and instead compute it on the fly as needed for UDPIPv4 and TCPIPv4. PiperOrigin-RevId: 315969714
2020-06-05Handle TCP segment split cases as per MSS.Mithun Iyer
- Always split segments larger than MSS. Currently, we base the segment split decision as a function of the send congestion window and MSS, which could be greater than the MSS advertised by remote. - While splitting segments, ensure the PSH flag is reset when there are segments that are queued to be sent. - With TCP_CORK, hold up segments up until MSS. Fix a bug in computing available send space before attempting to coalesce segments. Fixes #2832 PiperOrigin-RevId: 314802928
2020-06-03Avoid TCP segment split when out of sender window.Mithun Iyer
If the entire segment cannot be accommodated in the receiver advertised window and if there are still unacknowledged pending segments, skip splitting the segment. The segment transmit would get retried by the retransmit handler. PiperOrigin-RevId: 314538523
2020-06-01Internal change.gVisor bot
PiperOrigin-RevId: 314157710
2020-05-29Test TCP should queue RECEIVE request in SYN-SENTZeling Feng
PiperOrigin-RevId: 313878910
2020-05-29Move TCP to CLOSED from SYN-RCVD on RST.Mithun Iyer
RST handling is broken when the TCP state transitions from SYN-SENT to SYN-RCVD in case of simultaneous open. An incoming RST should trigger cleanup of the endpoint. RFC793, section 3.9, page 70. Fixes #2814 PiperOrigin-RevId: 313828777
2020-05-29Internal change.gVisor bot
PiperOrigin-RevId: 313821986
2020-05-28Add pcap logging to pcaketimpact.Ian Gudger
This makes debugging packetimpact tests much easier. PiperOrigin-RevId: 313662654
2020-05-26Automated rollback of changelist 311424257gVisor bot
PiperOrigin-RevId: 313300554
2020-05-20Test that we have PAWS mechanismZeling Feng
If there is a Timestamps option in the arriving segment and SEG.TSval < TS.Recent and if TS.Recent is valid, then treat the arriving segment as not acceptable: Send an acknowledgement in reply as specified in RFC-793 page 69 and drop the segment. https://tools.ietf.org/html/rfc1323#page-19 PiperOrigin-RevId: 312590678
2020-05-20Internal change.gVisor bot
PiperOrigin-RevId: 312559963
2020-05-18Support TCP options for packetimpactZeling Feng
PiperOrigin-RevId: 312119730
2020-05-14Internal change.gVisor bot
PiperOrigin-RevId: 311645222
2020-05-13Fix TCP segment retransmit timeout handling.Mithun Iyer
As per RFC 1122 and Linux retransmit timeout handling: - The segment retransmit timeout needs to exponentially increase and cap at a predefined value. - TCP connection needs to timeout after a predefined number of segment retransmissions. - TCP connection should not timeout when the retranmission timeout exceeds MaxRTO, predefined upper bound. Fixes #2673 PiperOrigin-RevId: 311463961
2020-05-13Automated rollback of changelist 311285868Bhasker Hariharan
PiperOrigin-RevId: 311424257
2020-05-13Replace test_runner.sh bash script with Go.Ian Gudger
PiperOrigin-RevId: 311285868
2020-05-11Internal change.gVisor bot
PiperOrigin-RevId: 311011004
2020-05-11Internal change.gVisor bot
PiperOrigin-RevId: 310949277
2020-05-08Add UDP send/recv packetimpact tests.Bhasker Hariharan
Fixes #2654 PiperOrigin-RevId: 310642216
2020-05-08Send ACK to OTW SEQs/unacc ACKs in CLOSE_WAITZeling Feng
This fixed the corresponding packetimpact test. PiperOrigin-RevId: 310593470
2020-05-07Internal change.gVisor bot
PiperOrigin-RevId: 310409922
2020-05-06Internal change.gVisor bot
PiperOrigin-RevId: 310213705
2020-05-05Support TCP zero window probes.Mithun Iyer
As per RFC 1122 4.2.2.17, when the remote advertizes zero receive window, the sender needs to probe for the window-size to become non-zero starting from the next retransmission interval. The TCP connection needs to be kept open as long as the remote is acknowledging the zero window probes. We reuse the retransmission timers to support this. Fixes #1644 PiperOrigin-RevId: 310021575
2020-05-04Internal change.gVisor bot
PiperOrigin-RevId: 309832671
2020-05-01Fix include type.Adin Scannell
PiperOrigin-RevId: 309506957
2020-05-01Internal change.gVisor bot
PiperOrigin-RevId: 309467878
2020-04-30Make tcp_close_wait_ack_test more accurateZeling Feng
Previously the test used an out-dated window size which is advertised during the handshake to generate testing packets, but the window size has changed since the handshake; currently it is using the most recent one which is advertised in DUT's ACK to our FIN packet to generate the testing outside-the-window packets. PiperOrigin-RevId: 309222921
2020-04-28Internal change.gVisor bot
PiperOrigin-RevId: 308940886
2020-04-24Add ICMP6 param problem testEyal Soha
Tested: When run on Linux, a correct ICMPv6 response is received. On netstack, no ICMPv6 response is received. PiperOrigin-RevId: 308343113
2020-04-24Better error message from ExpectFrameEyal Soha
Display the errors as diffs between the expected and wanted frame. PiperOrigin-RevId: 308333271
2020-04-24Improve and update packetimpact README.mdEyal Soha
PiperOrigin-RevId: 308328860
2020-04-24Standardize all Docker images.Adin Scannell
This change moves all Docker images to a standard location, and abstracts the build process so that they can be maintained in an automated fashion. This also allows the images to be architecture-independent. All images will now be referred to by the test framework via the canonical `gvisor.dev/images/<name>`, where `<name>` is a function of the path within the source tree. In a subsequent change, continuous integration will be added so that the images will always be correct and available locally. In the end, using `bazel` for Docker containers is simply not possible. Given that we already have the need to use `make` with the base container (for Docker), we extend this approach to get more flexibility. This change also adds a self-documenting and powerful Makefile that is intended to replace the collection of scripts in scripts. Canonical (self-documenting) targets can be added here for targets that understand which images need to be loaded and/or built. PiperOrigin-RevId: 308322438
2020-04-23Fix Layer merge and add unit testsEyal Soha
mergo was improperly merging nil and empty strings PiperOrigin-RevId: 308170862
2020-04-23Fix test output so that filenames have the correct path.Eyal Soha
Tested: Intentionally introduce an error and then run: blaze test --test_output=streamed //third_party/gvisor/test/packetimpact/tests:tcp_outside_the_window_linux_test PiperOrigin-RevId: 308114194
2020-04-23Simplify Docker test infrastructure.Adin Scannell
This change adds a layer of abstraction around the internal Docker APIs, and eliminates all direct dependencies on Dockerfiles in the infrastructure. A subsequent change will automated the generation of local images (with efficient caching). Note that this change drops the use of bazel container rules, as that experiment does not seem to be viable. PiperOrigin-RevId: 308095430
2020-04-23Run failing packetimpact test and expect failure.Eyal Soha
This will make it easier to notice if a code change causes an existing test to pass. PiperOrigin-RevId: 308057978
2020-04-22Add comments about deepcopy in Layer.incoming()Eyal Soha
PiperOrigin-RevId: 307812340
2020-04-21Don't ignore override if it is longer than layerStatesgVisor bot
PiperOrigin-RevId: 307708653
2020-04-19Don't accept segments outside the receive windowEyal Soha
Fixed to match RFC 793 page 69. Fixes #1607 PiperOrigin-RevId: 307334892
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 01:42:38 +0000