| Age | Commit message (Collapse) | Author |
|---|
|
When the scaled receive window size > 65535 (max uint16), we advertise
the scaled value as 65535, but are not adjusting the saved receive
window value when doing so. This would keep our current window
calculation logic to be incorrect, as the saved receive window value
is different from what was advertised.
Fixes #4903
PiperOrigin-RevId: 347771340
|
|
Without this change, this test produces quite opaque errors as valid TCP
segments are not logged; what we see in the end is any random traffic that
happened *after* the final TCP segment.
PiperOrigin-RevId: 346864169
|
|
PiperOrigin-RevId: 346852543
|
|
Recursive make is difficult to follow and debug. Drop this by using
internal functions, which, while difficult, are easier than trying to
following recursive invokations.
Further simplify the Makefile by collapsing the image bits and removing
the tools/vm directory, which is effectively unused.
Fixes #4952
PiperOrigin-RevId: 346569133
|
|
With the recent changes db36d948fa63ce950d94a5e8e9ebc37956543661, we try
to balance the receive window advertisements between payload lengths vs
segment overhead length. This works fine when segment size are much
higher than the overhead, but not otherwise. In cases where the segment
length is smaller than the segment overhead, we may end up not
advertising zero receive window for long time and end up tail-dropping
segments. This is especially pronounced when application socket reads
are slow or stopped. In this change we do not grow the right edge of
the receive window for smaller segment sizes similar to Linux.
Also, we keep track of the socket buffer usage and let the window grow
if the application is actively reading data.
Fixes #4903
PiperOrigin-RevId: 345832012
|
|
However, receiving duplicated fragments will not cause reassembly to
fail. This is what Linux does too:
https://github.com/torvalds/linux/blob/38525c6/net/ipv4/inet_fragment.c#L355
PiperOrigin-RevId: 345309546
|
|
To create DUTs in parallel, we need to create goroutines to do the setup. The
old code base has a lot of t.Fatal(f) usage in those setup functions which is
not great for this change: "FailNow must be called from the goroutine running
the test or benchmark function, not from other goroutines created during the
test" (https://golang.org/pkg/testing/#T.FailNow).
- Cleanup all t.Fatal(f) usage in DUT.Prepare()
- use goroutines to create DUTs in parallel
PiperOrigin-RevId: 344275809
|
|
Added a new flag num_duts to the test runner to create multiple DUTs for the
testbench can connect to.
PiperOrigin-RevId: 344195435
|
|
Summary of the approach: the test runner will set up a few DUTs according to
a flag and pass all the test networks to the testbench. The testbench will only
reside in a single container. The testbench will put all the test networks into
a buffered channel which served as a semaphore and now the user can freely use
t.Parallel() in (sub)tests and the true parallelism will be determined by how
many DUTs are configured. Creating DUTs on demand is not supported yet, the
test author should determine the number of DUTs to be used statically.
Specifically in this change:
- Don't export any global variables about the test network in testbench.
- Sniffer only binds on the local interface because it will be possible to have
multiple interfaces to multiple DUTs in a single testbench container.
- Migrate existing tests to stop using global variables.
PiperOrigin-RevId: 343965962
|
|
Updates #4427
PiperOrigin-RevId: 342703931
|
|
Teach ICMP.Parser/ToBytes to handle some non echo ICMP packets.
Teach IPv4.Parser that fragments only have a payload, not an upper layer.
Fix IPv4 and IPv6 reassembly tests to handle the change.
Fixes #4758
PiperOrigin-RevId: 341549665
|
|
The IPv6 reassembly test was also refactored to be easily extended with
more cases.
PiperOrigin-RevId: 339768605
|
|
This makes handling inbound fragmented packets easier, because a fragmented
packet might not have an actual ICMP header but only a payload. After this
change, the ICMPv4 is the last layer you can get because the payload is
embedded in it.
Note that this makes it consistent with the ICMPv6 implementation.
While I'm here, I've also added the Ident and Sequence fields on the ICMPv4
type. Defaults are still zero.
PiperOrigin-RevId: 339577094
|
|
By exposing an ALL_TESTS list in defs.bzl we can make sure all packetimpact
users get to agree on the list of all tests. A defect in this approach is that
we have to keep a list of packetimpact_testbench rules in the BUILD file. An
helper validate_all_tests has been added to help keep BUILD and .bzl files in
sync.
PiperOrigin-RevId: 337411839
|
|
PiperOrigin-RevId: 336350318
|
|
Most of the IPv4 fragmentation code was moved in the fragmentation
package and it is reused by IPv6 fragmentation.
Test:
- pkg/tcpip/network/ipv4:ipv4_test
- pkg/tcpip/network/ipv6:ipv6_test
- pkg/tcpip/network/fragmentation:fragmentation_test
Fixes #4389
PiperOrigin-RevId: 335714280
|
|
When the socket is set with SO_LINGER and close()'d in the initial state, it
should not linger and return immediately.
PiperOrigin-RevId: 334263149
|
|
segment_queue today has its own standalone limit of MaxUnprocessedSegments but
this can be a problem in UnlockUser() we do not release the lock till there are
segments to be processed. What can happen is as handleSegments dequeues packets
more keep getting queued and we will never release the lock. This can keep
happening even if the receive buffer is full because nothing can read() till we
release the lock.
Further having a separate limit for pending segments makes it harder to track
memory usage etc. Unifying the limits makes it easier to reason about memory in
use and makes the overall buffer behaviour more consistent.
PiperOrigin-RevId: 333508122
|
|
TCP needs to enqueue any send requests arriving when the connection is in
SYN_SENT state. The data should be sent out soon after completion of the
connection handshake.
Fixes #3995
PiperOrigin-RevId: 332482041
|
|
PiperOrigin-RevId: 332097286
|
|
gVisor stack ignores RSTs when in TIME_WAIT which is not the default
Linux behavior. Add a packetimpact test to test the same.
Also update code comments to reflect the rationale for the current
gVisor behavior.
PiperOrigin-RevId: 331629879
|
|
On receiving an ACK with unacceptable ACK number, in a closing state,
TCP, needs to reply back with an ACK with correct seq and ack numbers and
remain in same state. This change is as per RFC793 page 37, but with a
difference that it does not apply to ESTABLISHED state, just as in Linux.
Also add more tests to check for OTW sequence number and unacceptable
ack numbers in these states.
Fixes #3785
PiperOrigin-RevId: 329616283
|
|
PiperOrigin-RevId: 329526153
|
|
This prevents setting stale errno on responses.
Also fixes TestDiscardsUDPPacketsWithMcastSourceAddressV6 to use correct
multicast addresses in test.
Fixes #3793
PiperOrigin-RevId: 329391155
|
|
When SO_LINGER option is enabled, the close will not return until all the
queued messages are sent and acknowledged for the socket or linger timeout is
reached. If the option is not set, close will return immediately. This option
is mainly supported for connection oriented protocols such as TCP.
PiperOrigin-RevId: 328350576
|
|
This is a preparatory commit for a larger commit working on
ICMP generation in error cases.
This is removal of technical debt and cleanup in the gvisor code
as part of gvisor issue 2211.
Updates #2211.
PiperOrigin-RevId: 326615389
|
|
PiperOrigin-RevId: 325269275
|
|
Test:
- stack_test.TestJoinLeaveMulticastOnNICEnableDisable
- integration_test.TestIncomingMulticastAndBroadcast
PiperOrigin-RevId: 325185259
|
|
This required minor fixes to the bazel wrapper. The "dut_platform" is
also changed to "native" to line-up with the system call tests and
remove the hard-coded "linux" and "netstack" strings.
|
|
PiperOrigin-RevId: 323773771
|
|
PiperOrigin-RevId: 323553832
|
|
Storing *testing.T on test helper structs is problematic when
subtests are used, because it is possible for nested tests to call
Fatal on parent test, which incorrect terminates the parent test.
For example
func TestOuter(t *testing.T) {
dut := NewDUT(t)
t.Run("first test", func(t *testing.T) {
dut.FallibleCall()
})
t.Run("second test", func(t *testing.T) {
dut.FallibleCall()
}
}
In the example above, assuming `FallibleCall` calls `t.Fatal` on the
`t` it holds, if `dut.FallibleCall` fails in "first test", it will
call `Fatal` on the parent `t`, quitting `TestOuter`. This is not a
behavior we want.
PiperOrigin-RevId: 323350241
|
|
Previously, ICMP destination unreachable datagrams were ignored by TCP
endpoints. This caused connect to hang when an intermediate router
couldn't find a route to the host.
This manifested as a Kokoro error when Docker IPv6 was enabled. The Ruby
image test would try to install the sinatra gem and hang indefinitely
attempting to use an IPv6 address.
Fixes #3079.
|
|
PiperOrigin-RevId: 321790802
|
|
A packetimpact test for: "A node must be able to accept a fragmented packet
that, after reassembly, is as large as 1500 octets."
PiperOrigin-RevId: 321210729
|
|
Also ironed out all the bugs found on the IPv6 code path that affects socket
bind, send and receive.
PiperOrigin-RevId: 321202653
|
|
PiperOrigin-RevId: 321000340
|
|
RFC 6864 imposes various restrictions on the uniqueness of the IPv4
Identification field for non-atomic datagrams, defined as an IP datagram that
either can be fragmented (DF=0) or is already a fragment (MF=1 or positive
fragment offset). In order to be compliant, the ID field is assigned for all
non-atomic datagrams.
Add a TCP unit test that induces retransmissions and checks that the IPv4
ID field is unique every time. Add basic handling of the IP_MTU_DISCOVER
socket option so that the option can be used to disable PMTU discovery,
effectively setting DF=0. Attempting to set the sockopt to anything other
than disabled will fail because PMTU discovery is currently not implemented,
and the default behavior matches that of disabled.
PiperOrigin-RevId: 320081842
|
|
Currently this test produces an error resembling
tcp_zero_window_probe_retransmit_test.go:92: zero probe came sooner interval 3200179405 probe 4
which is approximately useless.
PiperOrigin-RevId: 319572263
|
|
The application can choose to initiate a non-blocking connect and
later block on a read, when the endpoint is still in SYN-SENT state.
PiperOrigin-RevId: 319311016
|
|
a) When GSO is in use we should not cap the segment to maxPayloadSize in
sender.maybeSendSegment as the GSO logic will cap the segment to the correct
size. Without this the host GSO is not used as we end up breaking up large
segments into small MSS sized segments before writing the packets to the
host.
b) The check to not split a segment due to it not fitting in the receiver window
when there are pending segments is incorrect as segments in writeList can be
really large as we just take the write call's buffer size and create a single
large segment. So a write of say 128KB will just be 1 segment in the
writeList.
The linux code checks if 1 MSS sized segments fits in the receiver's window
and if not then does not split the current segment. gVisor's check was
incorrect that it was checking if the whole segment which could be >>> 1 MSS
would fit in the receiver's window. This was causing us to prematurely stop
sending and falling back to retransmit timer/probe from the other end to send
data.
This was seen when running HTTPD benchmarks where @ HEAD when sending large
files the benchmark was taking forever to run.
The tcp_splitseg_mss_test.go is being deleted as the test as written doesn't
test what is intended correctly. This is because GSO is enabled by default and
the reason the MSS+1 sized segment is sent is because GSO is in use. A proper
test will require disabling GSO on linux and netstack which is going to take a
bit of work in packetimpact to do it correctly.
Separately a new test probably should be written that verifies that a segment >
availableWindow is not split if the availableWindow is < 1 MSS.
Fixes #3107
PiperOrigin-RevId: 319172089
|
|
The Option Type identifiers are internally encoded such that their
highest-order two bits specify the action that must be taken if the
processing IPv6 node does not recognize the Option Type:
00 - skip over this option and continue processing the header.
01 - discard the packet.
10 - discard the packet and, regardless of whether or not the
packet's Destination Address was a multicast address, send an
ICMP Parameter Problem, Code 2, message to the packet's
Source Address, pointing to the unrecognized Option Type.
11 - discard the packet and, only if the packet's Destination
Address was not a multicast address, send an ICMP Parameter
Problem, Code 2, message to the packet's Source Address,
pointing to the unrecognized Option Type.
PiperOrigin-RevId: 318566613
|
|
In passive open cases, we transition to Established state after
initializing endpoint's sender and receiver. With this we lose out
on any updates coming from the ACK that completes the handshake.
This change ensures that we uniformly transition to Established in all
cases and does minor cleanups.
Fixes #2938
PiperOrigin-RevId: 316567014
|
|
Moved the function for generating a payload of random byets of a specified
length into the testbench package so that it's availbale for all tests to use.
Added a test case to the IPv4 ID uniqueness test which uses a payload length
of 512 bytes. This test case passes for gVisor currently, whereas the test case
with a small payload of 11 bytes fails because gVisor only assigns the ID field
if the IP payload is sufficiently large.
PiperOrigin-RevId: 316185097
|
|
PiperOrigin-RevId: 316027588
|
|
Tests the effect of reordering on retransmission and window size.
Test covers the expected behavior of both Linux and netstack, however, netstack
does not behave as expected. Further, the current expected behavior of netstack
is not ideal and should be adjusted in the future.
PiperOrigin-RevId: 316015184
|
|
Reorganize the Connection types such that the defined types no longer expose
the lower-level functions SendFrame and CreateFrame. These methods are still
exported on the underlying Connection type, and thus can be accessed via a
type-cast. In future, defined types should have one or more type-safe versions
of the send() method on Connection, e.g. UDPIPv4 has Send() which allows the UDP
header to be overridden and SendIP() which allows both the IPv4 and UDP headers
to be modified.
testbench.Connection gets a SendFrameStateless method which sends frames
without updating the state of any of the layers. This should be used when
sending out-of-band control messages such as ICMP messages, as using the
normal Send method can result in errors when attempting to update the TCP
state using an ICMP packet.
Also remove the localAddr field of testbench.Connection and instead compute
it on the fly as needed for UDPIPv4 and TCPIPv4.
PiperOrigin-RevId: 315969714
|
|
- Always split segments larger than MSS.
Currently, we base the segment split decision as a function of the
send congestion window and MSS, which could be greater than the MSS
advertised by remote.
- While splitting segments, ensure the PSH flag is reset when there
are segments that are queued to be sent.
- With TCP_CORK, hold up segments up until MSS. Fix a bug in computing
available send space before attempting to coalesce segments.
Fixes #2832
PiperOrigin-RevId: 314802928
|
|
If the entire segment cannot be accommodated in the receiver advertised
window and if there are still unacknowledged pending segments, skip
splitting the segment. The segment transmit would get retried by the
retransmit handler.
PiperOrigin-RevId: 314538523
|
|
PiperOrigin-RevId: 313878910
|
