Age | Commit message (Collapse) | Author |
|
There are two device names on the test net.
- The sniffer/injector device which is always a linux device. Only the
testbench library is interested in this device.
- The device which is on the DUT. It happens to be the same device as
the former if DUT is linux. An individual test might be interested in
this device if the test cares about the device name.
PiperOrigin-RevId: 332112968
|
|
PiperOrigin-RevId: 332097286
|
|
On receiving an ACK with unacceptable ACK number, in a closing state,
TCP, needs to reply back with an ACK with correct seq and ack numbers and
remain in same state. This change is as per RFC793 page 37, but with a
difference that it does not apply to ESTABLISHED state, just as in Linux.
Also add more tests to check for OTW sequence number and unacceptable
ack numbers in these states.
Fixes #3785
PiperOrigin-RevId: 329616283
|
|
PiperOrigin-RevId: 329526153
|
|
When SO_LINGER option is enabled, the close will not return until all the
queued messages are sent and acknowledged for the socket or linger timeout is
reached. If the option is not set, close will return immediately. This option
is mainly supported for connection oriented protocols such as TCP.
PiperOrigin-RevId: 328350576
|
|
This is a preparatory commit for a larger commit working on
ICMP generation in error cases.
This is removal of technical debt and cleanup in the gvisor code
as part of gvisor issue 2211.
Updates #2211.
PiperOrigin-RevId: 326615389
|
|
This required minor fixes to the bazel wrapper. The "dut_platform" is
also changed to "native" to line-up with the system call tests and
remove the hard-coded "linux" and "netstack" strings.
|
|
Storing *testing.T on test helper structs is problematic when
subtests are used, because it is possible for nested tests to call
Fatal on parent test, which incorrect terminates the parent test.
For example
func TestOuter(t *testing.T) {
dut := NewDUT(t)
t.Run("first test", func(t *testing.T) {
dut.FallibleCall()
})
t.Run("second test", func(t *testing.T) {
dut.FallibleCall()
}
}
In the example above, assuming `FallibleCall` calls `t.Fatal` on the
`t` it holds, if `dut.FallibleCall` fails in "first test", it will
call `Fatal` on the parent `t`, quitting `TestOuter`. This is not a
behavior we want.
PiperOrigin-RevId: 323350241
|
|
Previously, ICMP destination unreachable datagrams were ignored by TCP
endpoints. This caused connect to hang when an intermediate router
couldn't find a route to the host.
This manifested as a Kokoro error when Docker IPv6 was enabled. The Ruby
image test would try to install the sinatra gem and hang indefinitely
attempting to use an IPv6 address.
Fixes #3079.
|
|
A packetimpact test for: "A node must be able to accept a fragmented packet
that, after reassembly, is as large as 1500 octets."
PiperOrigin-RevId: 321210729
|
|
Also ironed out all the bugs found on the IPv6 code path that affects socket
bind, send and receive.
PiperOrigin-RevId: 321202653
|
|
PiperOrigin-RevId: 321053634
|
|
PiperOrigin-RevId: 321000340
|
|
- IPv6 HopByHop Options Extension Header
- IPv6 Destination Options Extension Header
PiperOrigin-RevId: 318551425
|
|
Moved the function for generating a payload of random byets of a specified
length into the testbench package so that it's availbale for all tests to use.
Added a test case to the IPv4 ID uniqueness test which uses a payload length
of 512 bytes. This test case passes for gVisor currently, whereas the test case
with a small payload of 11 bytes fails because gVisor only assigns the ID field
if the IP payload is sufficiently large.
PiperOrigin-RevId: 316185097
|
|
Tests the effect of reordering on retransmission and window size.
Test covers the expected behavior of both Linux and netstack, however, netstack
does not behave as expected. Further, the current expected behavior of netstack
is not ideal and should be adjusted in the future.
PiperOrigin-RevId: 316015184
|
|
Reorganize the Connection types such that the defined types no longer expose
the lower-level functions SendFrame and CreateFrame. These methods are still
exported on the underlying Connection type, and thus can be accessed via a
type-cast. In future, defined types should have one or more type-safe versions
of the send() method on Connection, e.g. UDPIPv4 has Send() which allows the UDP
header to be overridden and SendIP() which allows both the IPv4 and UDP headers
to be modified.
testbench.Connection gets a SendFrameStateless method which sends frames
without updating the state of any of the layers. This should be used when
sending out-of-band control messages such as ICMP messages, as using the
normal Send method can result in errors when attempting to update the TCP
state using an ICMP packet.
Also remove the localAddr field of testbench.Connection and instead compute
it on the fly as needed for UDPIPv4 and TCPIPv4.
PiperOrigin-RevId: 315969714
|
|
- Always split segments larger than MSS.
Currently, we base the segment split decision as a function of the
send congestion window and MSS, which could be greater than the MSS
advertised by remote.
- While splitting segments, ensure the PSH flag is reset when there
are segments that are queued to be sent.
- With TCP_CORK, hold up segments up until MSS. Fix a bug in computing
available send space before attempting to coalesce segments.
Fixes #2832
PiperOrigin-RevId: 314802928
|
|
PiperOrigin-RevId: 313878910
|
|
RST handling is broken when the TCP state transitions
from SYN-SENT to SYN-RCVD in case of simultaneous open.
An incoming RST should trigger cleanup of the endpoint.
RFC793, section 3.9, page 70.
Fixes #2814
PiperOrigin-RevId: 313828777
|
|
PiperOrigin-RevId: 313300554
|
|
PiperOrigin-RevId: 312119730
|
|
PiperOrigin-RevId: 311424257
|
|
PiperOrigin-RevId: 311285868
|
|
PiperOrigin-RevId: 311011004
|
|
Fixes #2654
PiperOrigin-RevId: 310642216
|
|
PiperOrigin-RevId: 310213705
|
|
PiperOrigin-RevId: 308940886
|
|
Tested:
When run on Linux, a correct ICMPv6 response is received. On netstack, no
ICMPv6 response is received.
PiperOrigin-RevId: 308343113
|
|
Display the errors as diffs between the expected and wanted frame.
PiperOrigin-RevId: 308333271
|
|
mergo was improperly merging nil and empty strings
PiperOrigin-RevId: 308170862
|
|
This change adds a layer of abstraction around the internal Docker APIs,
and eliminates all direct dependencies on Dockerfiles in the infrastructure.
A subsequent change will automated the generation of local images (with
efficient caching). Note that this change drops the use of bazel container
rules, as that experiment does not seem to be viable.
PiperOrigin-RevId: 308095430
|
|
PiperOrigin-RevId: 307812340
|
|
PiperOrigin-RevId: 307708653
|
|
PiperOrigin-RevId: 306930652
|
|
TCP, in CLOSE-WAIT state, MUST return ACK with proper SEQ and ACK numbers after
recv a seg with OTW SEQ or unacc ACK number, and remain in same state. If the
connection is in a synchronized state, any unacceptable segment (out of window
sequence number or unacceptable acknowledgment number) must elicit only an empty
acknowledgment segment containing the current send-sequence number and an
acknowledgment indicating the next sequence number expected to be received, and
the connection remains in the same state.
PiperOrigin-RevId: 306897984
|
|
The tests are based on RFC 793 page 69.
Updates #1607
PiperOrigin-RevId: 306768847
|
|
PiperOrigin-RevId: 306726587
|
|
Rather than have a struct for the state of each type of connection, such as
TCP/IPv4, UDP/IPv4, TCP/IPv6, etc, have a state for each layer, such as UDP,
TCP, IPv4, IPv6. Those states can be composed into connections.
Tested:
Existing unit tests still pass/fail as expected.
PiperOrigin-RevId: 306703180
|
|
Add Sniffer.Drain() which drains the socket's receive buffer by temporarily
setting the socket to non-blocking, and receiving in a loop until EINTR,
EWOULDBLOCK or EAGAIN. This method should be used when long periods of time
elapses without receiving on the socket, because uninteresting packets may have
piled up in the receive buffer, filling it up and causing packets critical to
test operation to be dropped.
PiperOrigin-RevId: 306380480
|
|
This makes the code shorter and less repetitive.
TESTED:
All unit tests still pass.
PiperOrigin-RevId: 306161475
|
|
Tested:
Looked at output of failing tests.
PiperOrigin-RevId: 306031407
|
|
Dereference any fields which are pointers before string formatting so that the
value pointed to ends up in the string representation.
Tested:
Added TestLayerStringFormat to
//third_party/gvisor/test/packetimpact/testbench:testbench_test
PiperOrigin-RevId: 305627821
|
|
PiperOrigin-RevId: 305466309
|
|
RFC 1122 Section 3.7: A sending TCP MUST be robust against window shrinking,
which may cause the "useable window" to become negative.
PiperOrigin-RevId: 305377072
|
|
PiperOrigin-RevId: 305341059
|
|
PiperOrigin-RevId: 305157179
|
|
Tested:
Sample output for printing 3 different Layer structs:
&testbench.Ether{SrcAddr:02:42:c4:77:5d:14 DstAddr:02:42:c4:77:5d:0a}
&testbench.IPv4{SrcAddr:196.119.93.20 DstAddr:224.0.0.1}
&testbench.UDP{SrcPort:0xc00033b260 DstPort:0xc00033b280}
Sample output for printing a Layers struct (word-wrapped):
[&testbench.Ether{SrcAddr:02:42:c4:77:5d:14 DstAddr:02:42:c4:77:5d:0a}
&testbench.IPv4{SrcAddr:196.119.93.20 DstAddr:224.0.0.1}
&testbench.UDP{SrcPort:0xc00033b260 DstPort:0xc00033b280}
&testbench.Payload{Bytes:[104 101 108 108 111 32 119 111 114 108 100]}]
PiperOrigin-RevId: 305014376
|
|
This allows control over the gRPC timeouts as needed.
PiperOrigin-RevId: 304225713
|
|
PiperOrigin-RevId: 304098611
|