summaryrefslogtreecommitdiffhomepage
path: root/test/packetimpact/runner
AgeCommit message (Collapse)Author
2021-01-28Respect SO_BINDTODEVICE in unconnected UDP writesMarina Ciocea
Previously, sending on an unconnected UDP socket would ignore the SO_BINDTODEVICE option. Send on the configured interface when an UDP socket is bound to an interface through setsockop SO_BINDTODEVICE. Add packetimpact tests exercising UDP reads and writes with every combination of bound/unbound, broadcast/multicast/unicast destination, and bound/not-bound to device. PiperOrigin-RevId: 354299670
2021-01-27Add support for more fields in netstack for TCP_INFONayana Bidari
This CL adds support for the following fields: - RTT, RTTVar, RTO - send congestion window (sndCwnd) and send slow start threshold (sndSsthresh) - congestion control state(CaState) - ReorderSeen PiperOrigin-RevId: 354195361
2021-01-22Add tests for RACKNayana Bidari
- Added packetimpact tests for RACK. PiperOrigin-RevId: 353282342
2021-01-05Add benchmarks targets to BuildKite.Adin Scannell
This includes minor fix-ups: * Handle SIGTERM in runsc debug, to exit gracefully. * Fix cmd.debug.go opening all profiles as RDONLY. * Fix the test name in fio_test.go, and encode the block size in the test. PiperOrigin-RevId: 350205718
2020-12-09export MountTempDirectoryZeling Feng
PiperOrigin-RevId: 346487763
2020-12-08Run tcpdump as rootTamir Duberstein
Prior to this change tcpdump would fail to create its output file because the destination directory was owned by root. This would later cause killall to fail, as tcpdump was not running. Check exit code of tcpdump/tshark to produce better error messages should this regress. PiperOrigin-RevId: 346353911
2020-12-08Consolidate sniffer program logicTamir Duberstein
Avoid action at a distance where both `snifferArgs` and `snifferProg` must stay in sync. PiperOrigin-RevId: 346341231
2020-12-07Remove detritusTamir Duberstein
- Remove unused constants - Correct function doc comment - Remove useless cast - Restore comment removed in an earlier change PiperOrigin-RevId: 346205943
2020-12-07Avoid shadowing `testbench` packageTamir Duberstein
PiperOrigin-RevId: 346109185
2020-12-05Fix zero receive window advertisements.Mithun Iyer
With the recent changes db36d948fa63ce950d94a5e8e9ebc37956543661, we try to balance the receive window advertisements between payload lengths vs segment overhead length. This works fine when segment size are much higher than the overhead, but not otherwise. In cases where the segment length is smaller than the segment overhead, we may end up not advertising zero receive window for long time and end up tail-dropping segments. This is especially pronounced when application socket reads are slow or stopped. In this change we do not grow the right edge of the receive window for smaller segment sizes similar to Linux. Also, we keep track of the socket buffer usage and let the window grow if the application is actively reading data. Fixes #4903 PiperOrigin-RevId: 345832012
2020-11-25[3/3] Support isolated containers for parallel packetimpact testsZeling Feng
To create DUTs in parallel, we need to create goroutines to do the setup. The old code base has a lot of t.Fatal(f) usage in those setup functions which is not great for this change: "FailNow must be called from the goroutine running the test or benchmark function, not from other goroutines created during the test" (https://golang.org/pkg/testing/#T.FailNow). - Cleanup all t.Fatal(f) usage in DUT.Prepare() - use goroutines to create DUTs in parallel PiperOrigin-RevId: 344275809
2020-11-24[2/3] Support isolated containers for parallel packetimpact testsZeling Feng
Added a new flag num_duts to the test runner to create multiple DUTs for the testbench can connect to. PiperOrigin-RevId: 344195435
2020-11-24Report correct pointer value for "bad next header" ICMP errorJulian Elischer
Because the code handles a bad header as "payload" right up to the last moment we need to make sure payload handling does not remove the error information. Fixes #4909 PiperOrigin-RevId: 344141690
2020-11-19Don't hold AddressEndpoints for multicast addressesGhanan Gowripalan
Group addressable endpoints can simply check if it has joined the multicast group without maintaining address endpoints. This also helps remove the dependency on AddressableEndpoint from GroupAddressableEndpoint. Now that group addresses are not tracked with address endpoints, we can avoid accidentally obtaining a route with a multicast local address. PiperOrigin-RevId: 343336912
2020-11-18Remove the redundant containerIP parameterZeling Feng
PiperOrigin-RevId: 343144023
2020-11-16Add packetimpact tests for ICMPv6 Error message for fragmentToshi Kikuchi
Updates #4427 PiperOrigin-RevId: 342703931
2020-10-29Add IPv4 reassembly packetimpact testArthur Sfez
The IPv6 reassembly test was also refactored to be easily extended with more cases. PiperOrigin-RevId: 339768605
2020-10-15Syncing packetimpact tests in different directoriesZeling Feng
By exposing an ALL_TESTS list in defs.bzl we can make sure all packetimpact users get to agree on the list of all tests. A defect in this approach is that we have to keep a list of packetimpact_testbench rules in the BUILD file. An helper validate_all_tests has been added to help keep BUILD and .bzl files in sync. PiperOrigin-RevId: 337411839
2020-09-23Clean up flag.* usage in packetimpact's runner.RegisterFlagsZeling Feng
PiperOrigin-RevId: 333400865
2020-09-16Cleanup device name confusion in packetimpact testbenchZeling Feng
There are two device names on the test net. - The sniffer/injector device which is always a linux device. Only the testbench library is interested in this device. - The device which is on the DUT. It happens to be the same device as the former if DUT is linux. An individual test might be interested in this device if the test cares about the device name. PiperOrigin-RevId: 332112968
2020-09-11Use correct test device name in Fuchsia packetimpactAmanda Tait
Packetimpact on Fuchsia was formerly using the Linux test device name. This change fixes that. PiperOrigin-RevId: 331211518
2020-09-02Add support to run packetimpact tests against FuchsiaZeling Feng
blaze test <test_name>_fuchsia_test will run the corresponding packetimpact test against fuchsia. PiperOrigin-RevId: 329835290
2020-08-28Include command output on errorTamir Duberstein
Currently the logs produce TestOne: packetimpact_test.go:182: listing devices on ... container: process terminated with status: 126 which is not actionable; presumably the `ip` command output is interesting. PiperOrigin-RevId: 329032105
2020-08-25Add nogo support to go_binary and go_test targets.Adin Scannell
Updates #3374 PiperOrigin-RevId: 328378700
2020-08-06Add bzl_library rules for .bzl files without one.Adin Scannell
PiperOrigin-RevId: 325280924
2020-08-04Enable "make packetimpact-tests" to work.Adin Scannell
This required minor fixes to the bazel wrapper. The "dut_platform" is also changed to "native" to line-up with the system call tests and remove the hard-coded "linux" and "netstack" strings.
2020-07-26Add profiling to dockerutilZach Koopmans
Adds profiling with `runsc debug` or pprof to dockerutil. All targets using dockerutil should now be able to use profiling. In addition, modifies existing benchmarks to use profiling. PiperOrigin-RevId: 323298634
2020-07-22make connect(2) fail when dest is unreachableKevin Krakauer
Previously, ICMP destination unreachable datagrams were ignored by TCP endpoints. This caused connect to hang when an intermediate router couldn't find a route to the host. This manifested as a Kokoro error when Docker IPv6 was enabled. The Ruby image test would try to install the sinatra gem and hang indefinitely attempting to use an IPv6 address. Fixes #3079.
2020-07-20Add standard entrypoints for test targets.Adin Scannell
PiperOrigin-RevId: 322265513
2020-07-17DUT logs in test failure messages in packetimpactJay Zhuang
DUT logs will include logs from the posix server and gVisor, which provides a way to instrument the DUT during test failures. PiperOrigin-RevId: 321816647
2020-07-14Add support for UDP IPv6Jay Zhuang
Also ironed out all the bugs found on the IPv6 code path that affects socket bind, send and receive. PiperOrigin-RevId: 321202653
2020-07-13Print testbench log on packetimpact failuresJay Zhuang
These logs include flags passed to packetimpact tests (the Go tests), and test failure messages. PiperOrigin-RevId: 320989521
2020-07-08Move all tests to new docker API.Zach Koopmans
Moves following to new dockerutil API: - //test/e2e:integration_test - //test/image:image_test - //test/iptables:iptables_test - //test/root:root_test - //test/packetimpact:packetimpact_test PiperOrigin-RevId: 320253118
2020-07-03Update build rule to appease deprecationTamir Duberstein
Before this change, running packetimpact tests produces: parameter 'direct' must contain a list of elements, and may no longer accept a depset. The deprecated behavior may be temporarily re-enabled by setting --incompatible_disable_depset_inputs=false The positional parameter to depset has been changed to mean `direct` rather than its previous meaning of `items`. The documentation[0] explains: A positional parameter distinct from other parameters for legacy support. If --incompatible_disable_depset_items is false, this parameter serves as the value of items. If --incompatible_disable_depset_items is true, this parameter serves as the value of direct. See the documentation for these parameters for more details. [0] https://docs.bazel.build/versions/master/skylark/lib/globals.html PiperOrigin-RevId: 319555138
2020-06-30Fix two bugs in TCP sender.Bhasker Hariharan
a) When GSO is in use we should not cap the segment to maxPayloadSize in sender.maybeSendSegment as the GSO logic will cap the segment to the correct size. Without this the host GSO is not used as we end up breaking up large segments into small MSS sized segments before writing the packets to the host. b) The check to not split a segment due to it not fitting in the receiver window when there are pending segments is incorrect as segments in writeList can be really large as we just take the write call's buffer size and create a single large segment. So a write of say 128KB will just be 1 segment in the writeList. The linux code checks if 1 MSS sized segments fits in the receiver's window and if not then does not split the current segment. gVisor's check was incorrect that it was checking if the whole segment which could be >>> 1 MSS would fit in the receiver's window. This was causing us to prematurely stop sending and falling back to retransmit timer/probe from the other end to send data. This was seen when running HTTPD benchmarks where @ HEAD when sending large files the benchmark was taking forever to run. The tcp_splitseg_mss_test.go is being deleted as the test as written doesn't test what is intended correctly. This is because GSO is enabled by default and the reason the MSS+1 sized segment is sent is because GSO is in use. A proper test will require disabling GSO on linux and netstack which is going to take a bit of work in packetimpact to do it correctly. Separately a new test probably should be written that verifies that a segment > availableWindow is not split if the availableWindow is < 1 MSS. Fixes #3107 PiperOrigin-RevId: 319172089
2020-06-17Move mount configutation to RunOptsFabricio Voznika
Separate mount configuration from links and move it to RunOpts, like the other options. PiperOrigin-RevId: 317010158
2020-06-11Add test for reordering.Ian Gudger
Tests the effect of reordering on retransmission and window size. Test covers the expected behavior of both Linux and netstack, however, netstack does not behave as expected. Further, the current expected behavior of netstack is not ideal and should be adjusted in the future. PiperOrigin-RevId: 316015184
2020-05-28Add pcap logging to pcaketimpact.Ian Gudger
This makes debugging packetimpact tests much easier. PiperOrigin-RevId: 313662654
2020-05-26Automated rollback of changelist 311424257gVisor bot
PiperOrigin-RevId: 313300554
2020-05-13Automated rollback of changelist 311285868Bhasker Hariharan
PiperOrigin-RevId: 311424257
2020-05-13Replace test_runner.sh bash script with Go.Ian Gudger
PiperOrigin-RevId: 311285868
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 14:08:36 +0000