| Age | Commit message (Collapse) | Author |
|---|
|
This is to keep it consistent with other test, and
it's easier to maintain them in single file.
Also increase python test timeout to deflake it.
PiperOrigin-RevId: 210575042
Change-Id: I2ef5bcd5d97c08549f0c5f645c4b694253ef0b4d
|
|
This is to troubleshoot problems with a hung process that is
not responding to 'runsc debug --stack' command.
PiperOrigin-RevId: 210483513
Change-Id: I4377b210b4e51bc8a281ad34fd94f3df13d9187d
|
|
For readonly filesystems specified via relative path, we were forgetting to
mount relative to the container's bundle directory.
PiperOrigin-RevId: 210483388
Change-Id: I84809fce4b1f2056d0e225547cb611add5f74177
|
|
When revalidating a Dirent, if the inode id is the same, then we don't need to
throw away the entire Dirent. We can just update the unstable attributes in
place.
If the inode id has changed, then the remote file has been deleted or moved,
and we have no choice but to throw away the dirent we have a look up another.
In this case, we may still end up losing a mounted dirent that is a child of
the revalidated dirent. However, that seems appropriate here because the entire
mount point has been pulled out from underneath us.
Because gVisor's overlay is at the Inode level rather than the Dirent level, we
must pass the parent Inode and name along with the Inode that is being
revalidated.
PiperOrigin-RevId: 210431270
Change-Id: I705caef9c68900234972d5aac4ae3a78c61c7d42
|
|
Previously, we were only using the host inode id as the QID path. But the host
filesystem can have multiple devices with conflicting inode ids. This resulted
in duplicate inode ids in the sentry.
This CL generates a unique QID for each <host inode, host device> pair.
PiperOrigin-RevId: 210424813
Change-Id: I16d106f61c7c8f910c0da4ceec562a010ffca2fb
|
|
PiperOrigin-RevId: 210422178
Change-Id: I984dd348d467908bc3180a20fc79b8387fcca05e
|
|
Now each container gets its own dedicated gofer that is chroot'd to the
rootfs path. This is done to add an extra layer of security in case the
gofer gets compromised.
PiperOrigin-RevId: 210396476
Change-Id: Iba21360a59dfe90875d61000db103f8609157ca0
|
|
This CL adds terminal support for "docker exec". We previously only supported
consoles for the container process, but not exec processes.
The SYS_IOCTL syscall was added to the default seccomp filter list, but only
for ioctls that get/set winsize and termios structs. We need to allow these
ioctl for all containers because it's possible to run "exec -ti" on a
container that was started without an attached console, after the filters
have been installed.
Note that control-character signals are still not properly supported.
Tested with:
$ docker run --runtime=runsc -it alpine
In another terminial:
$ docker exec -it <containerid> /bin/sh
PiperOrigin-RevId: 210185456
Change-Id: I6d2401e53a7697bb988c120a8961505c335f96d9
|
|
Previously, runsc improperly attempted to find an executable in the container's
PATH.
We now search the PATH via the container's fsgofer rather than the host FS,
eliminating the confusing differences between paths on the host and within a
container.
PiperOrigin-RevId: 210159488
Change-Id: I228174dbebc4c5356599036d6efaa59f28ff28d2
|
|
This is used when '--overlay=true' to guarantee writes are not sent to gofer.
PiperOrigin-RevId: 210116288
Change-Id: I7616008c4c0e8d3668e07a205207f46e2144bf30
|
|
Removed syscalls that are only used by whitelistfs
which has its own set of filters.
PiperOrigin-RevId: 209967259
Change-Id: Idb2e1b9d0201043d7cd25d96894f354729dbd089
|
|
The bug was caused by os.File's finalizer, which closes the file. Because
fsgofer.serve() was passed a file descriptor as an int rather than a os.File,
callers would pass os.File.Fd(), and the os.File would go out of scope. Thus,
the file would get GC'd and finalized nondeterministically, causing failures
when the file was used.
PiperOrigin-RevId: 209861834
Change-Id: Idf24d5c1f04c9b28659e62c97202ab3b4d72e994
|
|
UDS has a lower size limit than regular files. When running under bazel
this limit is exceeded. Test was changed to always mount /tmp and use
it for the test.
PiperOrigin-RevId: 209717830
Change-Id: I1dbe19fe2051ffdddbaa32b188a9167f446ed193
|
|
PiperOrigin-RevId: 209679235
Change-Id: I527e779eeb113d0c162f5e27a2841b9486f0e39f
|
|
Not sure why, just removed for now to unblock the tests.
PiperOrigin-RevId: 209661403
Change-Id: I72785c071687d54e22bda9073d36b447d52a7018
|
|
PiperOrigin-RevId: 209655274
Change-Id: Id381114bdb3197c73e14f74b3f6cf1afd87d60cb
|
|
PiperOrigin-RevId: 209647293
Change-Id: I980fca1257ea3fcce796388a049c353b0303a8a5
|
|
Tests get a readonly rootfs mapped to / (which was the case before)
and writable TEST_TMPDIR. This makes it easier to setup containers to
write to files and to share state between test and containers.
PiperOrigin-RevId: 209453224
Change-Id: I4d988e45dc0909a0450a3bb882fe280cf9c24334
|
|
The ones using 'kvm' actually mean that they don't want overlay.
PiperOrigin-RevId: 209194318
Change-Id: I941a443cb6d783e2c80cf66eb8d8630bcacdb574
|
|
Bazel adds the build type in front of directories making it hard to
refer to binaries in code.
PiperOrigin-RevId: 209010854
Change-Id: I6c9da1ac3bbe79766868a3b14222dd42d03b4ec5
|
|
When multiple containers run inside a sentry, each container has its own root
filesystem and set of mounts. Containers are also added after sentry boot rather
than all configured and known at boot time.
The fsgofer needs to be able to serve the root filesystem of each container.
Thus, it must be possible to add filesystems after the fsgofer has already
started.
This change:
* Creates a URPC endpoint within the gofer process that listens for requests to
serve new content.
* Enables the sentry, when starting a new container, to add the new container's
filesystem.
* Mounts those new filesystems at separate roots within the sentry.
PiperOrigin-RevId: 208903248
Change-Id: Ifa91ec9c8caf5f2f0a9eead83c4a57090ce92068
|
|
This file access type is actually called "proxy-shared", but I forgot to update
all locations.
PiperOrigin-RevId: 208832491
Change-Id: I7848bc4ec2478f86cf2de1dcd1bfb5264c6276de
|
|
Previously, gofer filesystems were configured with the default "fscache"
policy, which caches filesystem metadata and contents aggressively. While this
setting is best for performance, it means that changes from inside the sandbox
may not be immediately propagated outside the sandbox, and vice-versa.
This CL changes volumes and the root fs configuration to use a new
"remote-revalidate" cache policy which tries to retain as much caching as
possible while still making fs changes visible across the sandbox boundary.
This cache policy is enabled by default for the root filesystem. The default
value for the "--file-access" flag is still "proxy", but the behavior is
changed to use the new cache policy.
A new value for the "--file-access" flag is added, called "proxy-exclusive",
which turns on the previous aggressive caching behavior. As the name implies,
this flag should be used when the sandbox has "exclusive" access to the
filesystem.
All volume mounts are configured to use the new cache policy, since it is
safest and most likely to be correct. There is not currently a way to change
this behavior, but it's possible to add such a mechanism in the future. The
configurability is a smaller issue for volumes, since most of the expensive
application fs operations (walking + stating files) will likely served by the
root fs.
PiperOrigin-RevId: 208735037
Change-Id: Ife048fab1948205f6665df8563434dbc6ca8cfc9
|
|
PiperOrigin-RevId: 208282383
Change-Id: Ifa4aaf5d925b17d9a0672ea951a4570d35855300
|
|
PiperOrigin-RevId: 208274833
Change-Id: Iddda875a87205f7b8fa6f5c60b547522b94a6696
|
|
Previously, processes which used file-system Unix Domain Sockets could not be
checkpoint-ed in runsc because the sockets were saved with their inode
numbers which do not necessarily remain the same upon restore. Now,
the sockets are also saved with their paths so that the new inodes
can be determined for the sockets based on these paths after restoring.
Tests for cases with UDS use are included. Test cleanup to come.
PiperOrigin-RevId: 208268781
Change-Id: Ieaa5d5d9a64914ca105cae199fd8492710b1d7ec
|
|
inethost doesn't support netlink and 'ifconfig' call to retrieve IP address
fails. Look up IP address in /etc/hosts instead.
PiperOrigin-RevId: 208135641
Change-Id: I3c2ce15db6fc7c3306a45e4bfb9cc5d4423ffad3
|
|
Closes #94
PiperOrigin-RevId: 207997580
Change-Id: I19b426f1586b5ec12f8b0cd5884d5b401d334924
|
|
Add option to redirect packet back to netstack if it's destined to itself.
This fixes the problem where connecting to the local NIC address would
not work, e.g.:
echo bar | nc -l -p 8080 &
echo foo | nc 192.168.0.2 8080
PiperOrigin-RevId: 207995083
Change-Id: I17adc2a04df48bfea711011a5df206326a1fb8ef
|
|
SACK is disabled by default and needs to be manually enabled. It not only
improves performance, but also fixes hangs downloading files from certain
websites.
PiperOrigin-RevId: 207906742
Change-Id: I4fb7277b67bfdf83ac8195f1b9c38265a0d51e8b
|
|
integration_test runs manually and breakage wasn't detected. Added test to
kokoro to ensure breakages are detected in the future.
PiperOrigin-RevId: 207772835
Change-Id: Iada81b579b558477d4db3516b38366ef6a2e933d
|
|
PiperOrigin-RevId: 207642348
Change-Id: Iacec9f097ab93b91c0c8eea61b1347e864f57a8b
|
|
PiperOrigin-RevId: 207581723
Change-Id: I6e4eb1227b5ed302de5e6c891040b670955f1eea
|
|
mysql image test is timing out sporadically and it's hard to tell
where the slow down in coming from.
PiperOrigin-RevId: 207147237
Change-Id: I05a4d2c116292695d63cf861f3b89cd1c54b6106
|
|
PiperOrigin-RevId: 207039273
Change-Id: Ib8f55a6dc302052ab4a10ccd70b07f0d73b373df
|
|
PiperOrigin-RevId: 206834838
Change-Id: I9a44c6fa5f4766a01f86e90810f025cefecdf2d4
|
|
It is unused.
PiperOrigin-RevId: 206798328
Change-Id: I2d7d27c0e4a0ef51264b900f14f1b3fdad17f2c4
|
|
PiperOrigin-RevId: 206674267
Change-Id: Ifc4eb19e0882e8bed566e9c553af910925fe6ae2
|
|
(Why not?)
PiperOrigin-RevId: 206401282
Change-Id: Iadcb7fb8472de7aef7c4bf5182e9a1d339e4d259
|
|
PiperOrigin-RevId: 206333130
Change-Id: Ic85874dbd53c5de2164a7bb75769d52d43666c2a
|
|
PiperOrigin-RevId: 206084473
Change-Id: I44e1b64b9cdd2964357799dca27cc0cbc19ce07d
|
|
When "exec" command is called without the "--detach" flag, we spawn a second
"exec" command and wait for that one to start. We use the pid file passed in
--pid-file to detect when this second command has started running.
However if "exec" is called with no --pid-file flag, this system breaks down,
as we don't have a pid file to wait for.
This CL ensures that the second instance of the "exec" command always writes a
pid-file, so the wait is successful.
PiperOrigin-RevId: 206002403
Change-Id: If9f2be31eb6e831734b1b833f25054ec71ab94a6
|
|
PiperOrigin-RevId: 205718733
Change-Id: I200b23af064d256f157baf9da5005ab16cc55928
|
|
PiperOrigin-RevId: 205714667
Change-Id: I317a2ca98ac3bdad97c4790fcc61b004757d99ef
|
|
PiperOrigin-RevId: 205470108
Change-Id: I226878a887fe1133561005357a9e3b09428b06b6
|
|
PiperOrigin-RevId: 205334841
Change-Id: Ia60d486f9aae70182fdc4af50cf7c915986126d7
|
|
Docker expects containers to be created before they are restored.
However, gVisor restoring requires specificactions regarding the kernel
and the file system. These actions were originally in booting the sandbox.
Now setting up the file system is deferred until a call to a call to
runsc start. In the restore case, the kernel is destroyed and a new kernel
is created in the same process, as we need the same process for Docker.
These changes required careful execution of concurrent processes which
required the use of a channel.
Full docker integration still needs the ability to restore into the same
container.
PiperOrigin-RevId: 205161441
Change-Id: Ie1d2304ead7e06855319d5dc310678f701bd099f
|
|
We must delete the output file at the beginning of the test, otherwise the test
fails immediately.
Also some minor cleanups in readOutputFile.
PiperOrigin-RevId: 205150525
Change-Id: I6bae1acd5b315320a2c6e25a59afcfc06267fb17
|
|
PiperOrigin-RevId: 204522004
Change-Id: I4819dc025f0a1df03ceaaba7951b1902d44562b3
|
|
PiperOrigin-RevId: 204511630
Change-Id: Ib841a7144f3833321b0e69b8585b03c4ed55a265
|
