summaryrefslogtreecommitdiffhomepage
path: root/runsc
AgeCommit message (Collapse)Author
2020-09-09[vfs] Allow mountpoint to be an existing non-directory.Ayush Ranjan
Unlike linux mount(2), OCI spec allows mounting on top of an existing non-directory file. PiperOrigin-RevId: 327914342
2020-09-09Make mounts ReadWrite first, then later change to ReadOnly.Nicolas Lacasse
This lets us create "synthetic" mountpoint directories in ReadOnly mounts during VFS setup. Also add context.WithMountNamespace, as some filesystems (like overlay) require a MountNamespace on ctx to handle vfs.Filesystem Operations. PiperOrigin-RevId: 327874971
2020-09-09[vfs] Create recursive dir creation util.Ayush Ranjan
Refactored the recursive dir creation util in runsc/boot/vfs.go to be more flexible. PiperOrigin-RevId: 327719100
2020-09-09Move boot.Config to its own packageFabricio Voznika
Updates #3494 PiperOrigin-RevId: 327548511
2020-09-09Remove path walk from localFile.MknodFabricio Voznika
Replace mknod call with mknodat equivalent to protect against symlink attacks. Also added Mknod tests. Remove goferfs reliance on gofer to check for file existence before creating a synthetic entry. Updates #2923 PiperOrigin-RevId: 327544516
2020-08-19Return EROFS if mount is read-onlyFabricio Voznika
PiperOrigin-RevId: 327300635
2020-08-10Run GC before sandbox exit when leak checking is enabled.Dean Deng
Running garbage collection enqueues all finalizers, which are used by the refs/refs_vfs2 packages to detect reference leaks. Note that even with GC, there is no guarantee that all finalizers will be run before the program exits. This is a best effort attempt to activate leak checks as much as possible. Updates #3545. PiperOrigin-RevId: 325834438
2020-08-07[vfs2] Fix tmpfs mounting.Ayush Ranjan
Earlier we were using NLink to decide if /tmp is empty or not. However, NLink at best tells us about the number of subdirectories (via the ".." entries). NLink = n + 2 for n subdirectories. But it does not tell us if the directory is empty. There still might be non-directory files. We could also not rely on NLink because host overlayfs always returned 1. VFS1 uses Readdir to decide if the directory is empty. Used a similar approach. We now use IterDirents to decide if the "/tmp" directory is empty. Fixes #3369 PiperOrigin-RevId: 325554234
2020-08-06Only register /dev/net/tun if supported.Dean Deng
PiperOrigin-RevId: 325266487
2020-08-05Stop profiling when the sentry exitsFabricio Voznika
Also removes `--profile-goroutine` because it's equivalent to `debug --stacks`. PiperOrigin-RevId: 325061502
2020-08-04Error if dup'ing stdio FDs will clobber another FDFabricio Voznika
The loader dup's stdio FD into stable FD's starting at a fixed number. During tests, it's possible that the target FD is already in use. Added check to error early so it's easier to debug failures. Also bumped up the starting FD number to prevent collisions. PiperOrigin-RevId: 324917299
2020-08-03Plumbing context.Context to DecRef() and Release().Nayana Bidari
context is passed to DecRef() and Release() which is needed for SO_LINGER implementation. PiperOrigin-RevId: 324672584
2020-07-30Call lseek(0, SEEK_CUR) unconditionally in runsc fsgofer's Readdir(offset=0).Jamie Liu
9P2000.L is silent as to how readdir RPCs interact with directory mutation. The most performant option is for Treaddir with offset=0 to restart iteration, avoiding needing to walk+open+clunk a new directory fid between invocations of getdents64(2), and the VFS2 gofer client assumes this is the case. Make this actually true for the runsc fsgofer. Fixes #3344, #3345, #3355 PiperOrigin-RevId: 324090384
2020-07-30Implement overlayfs_stale_read for vfs2.Jamie Liu
PiperOrigin-RevId: 324080111
2020-07-28Merge pull request #3102 from stripe:andrew/cgroup-eintrgVisor bot
PiperOrigin-RevId: 323638518
2020-07-27Clean-up bazel wrapper.Adin Scannell
The bazel server was being started as the wrong user, leading to issues where the container would suddenly exit during a build. We can also simplify the waiting logic by starting the container in two separate steps: those that must complete first, then the asynchronous bit. PiperOrigin-RevId: 323391161
2020-07-25test/syscall: run each test case in a separate network namespaceAndrei Vagin
... when it is possible. The guitar gVisorKernel*Workflow-s runs test with the local execution_method. In this case, blaze runs test cases locally without sandboxes. This means that all tests run in the same network namespace. We have a few tests which use hard-coded network ports and they can fail if one of these port will be used by someone else or by another test cases. PiperOrigin-RevId: 323137254
2020-07-24Reduce walk and open cost in fsgoferFabricio Voznika
Implement WalkGetAttr() to reuse the stat that is already needed for Walk(). In addition, cache file QID, so it doesn't need to stat the file to compute it. open(2) time improved by 10%: Baseline: 6780 ns Change: 6083 ns Also fixed file type which was not being set in all places. PiperOrigin-RevId: 323102560
2020-07-23Added stub FUSE filesystemRidwan Sharif
Allow FUSE filesystems to be mounted using libfuse. The appropriate flags and mount options are parsed and understood by fusefs.
2020-07-23Fix fsgofer Open() when control file is using O_PATHFabricio Voznika
Open tries to reuse the control file to save syscalls and file descriptors when opening a file. However, when the control file was opened using O_PATH (e.g. no file permission to open readonly), Open() would not check for it. PiperOrigin-RevId: 322821729
2020-07-22Support for receiving outbound packets in AF_PACKET.Bhasker Hariharan
Updates #173 PiperOrigin-RevId: 322665518
2020-07-15Merge pull request #3022 from prattmic:runsc_do_pdeathsiggVisor bot
PiperOrigin-RevId: 321449877
2020-07-15fdbased: Vectorized write for packet; relax writev syscall filter.Ting-Yu Wang
Now it calls pkt.Data.ToView() when writing the packet. This may require copying when the packet is large, which puts the worse case in an even worse situation. This sent out in a separate preparation change as it requires syscall filter changes. This change will be followed by the change for the adoption of the new PacketHeader API. PiperOrigin-RevId: 321447003
2020-07-15Apply pdeathsig to gofer for runsc run/doMichael Pratt
Much like the boot process, apply pdeathsig to the gofer for cases where the sandbox lifecycle is attached to the parent (runsc run/do). This isn't strictly necessary, as the gofer normally exits once the sentry disappears, but this makes that extra reliable.
2020-07-15Merge pull request #3165 from ridwanmsharif:ridwanmsharif/fuse-off-by-defaultgVisor bot
PiperOrigin-RevId: 321411758
2020-07-14Prepare boot.Loader to support multi-container TTYFabricio Voznika
- Combine process creation code that is shared between root and subcontainer processes - Move root container information into a struct for clarity Updates #2714 PiperOrigin-RevId: 321204798
2020-07-13Merge pull request #2672 from amscanne:shim-integratedgVisor bot
PiperOrigin-RevId: 321053634
2020-07-09Update shim to build using bazel.Adin Scannell
The go.mod dependency tree for the shim was somehow contradictory. After resolving these issues (e.g. explicitly imported k8s 1.14, pulling a specific dbus version), and adding all dependencies, the shim can now be build as part of the regular bazel tree. As part of this process, minor cleanup was done in all the source files: headers were standardized (and include "The gVisor Authors" in addition to the "The containerd Authors" if originally derived from containerd sources), and comments were cleaned up to meet coding standards. This change makes the containerd installation dynamic, so that multiple versions can be tested, and drops the static installer for the VM image itself. This change also updates test/root/crictl_test.go and related utilities, so that the containerd tests can be run on any version (and in cases where it applies, they can be run on both v1 and v2 as parameterized tests).
2020-07-09Add args and netns flag to runsc specIan Lewis
Adds a netns flag to runsc spec that allows users to specify a network namespace path when creating a sample config.json file. Also, adds the ability to specify the command arguments used when running the container. This will make it easier for new users to create sample OCI bundles without having to edit the config.json by hand. PiperOrigin-RevId: 320486267
2020-07-09Gate FUSE behind a runsc flagRidwan Sharif
This change gates all FUSE commands (by gating /dev/fuse) behind a runsc flag. In order to use FUSE commands, use the --fuse flag with the --vfs2 flag. Check if FUSE is enabled by running dmesg in the sandbox.
2020-07-08Add shared mount hints to VFS2Fabricio Voznika
Container restart test is disabled for VFS2 for now. Updates #1487 PiperOrigin-RevId: 320296401
2020-07-08Drop empty lineMichael Pratt
PiperOrigin-RevId: 320281516
2020-07-07[vfs2] Remove VFS1 usage in VDSO.Ayush Ranjan
Removed VDSO dependency on VFS1. Resolves #2921 PiperOrigin-RevId: 320122176
2020-07-07Fix mknod and inotify syscall testAyush Ranjan
This change fixes a few things: - creating sockets using mknod(2) is supported via vfs2 - fsgofer can create regular files via mknod(2) - mode = 0 for mknod(2) will be interpreted as regular file in vfs2 as well Updates #2923 PiperOrigin-RevId: 320074267
2020-07-01cgroup: retry file writes on EINTR errorsAndrew Dunham
2020-06-25Test that the fuse device can be openedRidwan Sharif
2020-06-25Moved FUSE device under the fuse directoryRidwan Sharif
2020-06-24Port /dev/net/tun device to VFS2.Nicolas Lacasse
Updates #2912 #1035 PiperOrigin-RevId: 318162565
2020-06-24Add support for Stack level options.Bhasker Hariharan
Linux controls socket send/receive buffers using a few sysctl variables - net.core.rmem_default - net.core.rmem_max - net.core.wmem_max - net.core.wmem_default - net.ipv4.tcp_rmem - net.ipv4.tcp_wmem The first 4 control the default socket buffer sizes for all sockets raw/packet/tcp/udp and also the maximum permitted socket buffer that can be specified in setsockopt(SOL_SOCKET, SO_(RCV|SND)BUF,...). The last two control the TCP auto-tuning limits and override the default specified in rmem_default/wmem_default as well as the max limits. Netstack today only implements tcp_rmem/tcp_wmem and incorrectly uses it to limit the maximum size in setsockopt() as well as uses it for raw/udp sockets. This changelist introduces the other 4 and updates the udp/raw sockets to use the newly introduced variables. The values for min/max match the current tcp_rmem/wmem values and the default value buffers for UDP/RAW sockets is updated to match the linux value of 212KiB up from the really low current value of 32 KiB. Updates #3043 Fixes #3043 PiperOrigin-RevId: 318089805
2020-06-23Support for saving pointers to fields in the state package.Adin Scannell
Previously, it was not possible to encode/decode an object graph which contained a pointer to a field within another type. This was because the encoder was previously unable to disambiguate a pointer to an object and a pointer within the object. This CL remedies this by constructing an address map tracking the full memory range object occupy. The encoded Refvalue message has been extended to allow references to children objects within another object. Because the encoding process may learn about object structure over time, we cannot encode any objects under the entire graph has been generated. This CL also updates the state package to use standard interfaces intead of reflection-based dispatch in order to improve performance overall. This includes a custom wire protocol to significantly reduce the number of allocations and take advantage of structure packing. As part of these changes, there are a small number of minor changes in other places of the code base: * The lists used during encoding are changed to use intrusive lists with the objectEncodeState directly, which required that the ilist Len() method is updated to work properly with the ElementMapper mechanism. * A bug is fixed in the list code wherein Remove() called on an element that is already removed can corrupt the list (removing the element if there's only a single element). Now the behavior is correct. * Standard error wrapping is introduced. * Compressio was updated to implement the new wire.Reader and wire.Writer inteface methods directly. The lack of a ReadByte and WriteByte caused issues not due to interface dispatch, but because underlying slices for a Read or Write call through an interface would always escape to the heap! * Statify has been updated to support the new APIs. See README.md for a description of how the new mechanism works. PiperOrigin-RevId: 318010298
2020-06-23Port /dev/tty device to VFS2.Nicolas Lacasse
Support is limited to the functionality that exists in VFS1. Updates #2923 #1035 PiperOrigin-RevId: 317981417
2020-06-18iptables: remove metadata structKevin Krakauer
Metadata was useful for debugging and safety, but enough tests exist that we should see failures when (de)serialization is broken. It made stack initialization more cumbersome and it's also getting in the way of ip6tables. PiperOrigin-RevId: 317210653
2020-06-18Support setsockopt SO_SNDBUF/SO_RCVBUF for raw/udp sockets.Bhasker Hariharan
Updates #173,#6 Fixes #2888 PiperOrigin-RevId: 317087652
2020-06-16Add runsc options to set checksum offloading statusgVisor bot
--tx-checksum-offload=<true|false> enable TX checksum offload (default: false) --rx-checksum-offload=<true|false> enable RX checksum offload (default: true) Fixes #2989 PiperOrigin-RevId: 316781309
2020-06-16Print spec as json when --debug is enabledFabricio Voznika
The previous format skipped many important structs that are pointers, especially for cgroups. Change to print as json, removing parts of the spec that are not relevant. Also removed debug message from gofer that can be very noisy when directories are large. PiperOrigin-RevId: 316713267
2020-06-11Set the HOME environment variable for sub-containers.Ian Lewis
Fixes #701 PiperOrigin-RevId: 316025635
2020-06-11Add //pkg/sentry/fsimpl/overlay.Jamie Liu
Major differences from existing overlay filesystems: - Linux allows lower layers in an overlay to require revalidation, but not the upper layer. VFS1 allows the upper layer in an overlay to require revalidation, but not the lower layer. VFS2 does not allow any layers to require revalidation. (Now that vfs.MkdirOptions.ForSyntheticMountpoint exists, no uses of overlay in VFS1 are believed to require upper layer revalidation; in particular, the requirement that the upper layer support the creation of "trusted." extended attributes for whiteouts effectively required the upper filesystem to be tmpfs in most cases.) - Like VFS1, but unlike Linux, VFS2 overlay does not attempt to make mutations of the upper layer atomic using a working directory and features like RENAME_WHITEOUT. (This may change in the future, since not having a working directory makes error recovery for some operations, e.g. rmdir, particularly painful.) - Like Linux, but unlike VFS1, VFS2 represents whiteouts using character devices with rdev == 0; the equivalent of the whiteout attribute on directories is xattr trusted.overlay.opaque = "y"; and there is no equivalent to the whiteout attribute on non-directories since non-directories are never merged with lower layers. - Device and inode numbers work as follows: - In Linux, modulo the xino feature and a special case for when all layers are the same filesystem: - Directories use the overlay filesystem's device number and an ephemeral inode number assigned by the overlay. - Non-directories that have been copied up use the device and inode number assigned by the upper filesystem. - Non-directories that have not been copied up use a per-(overlay, layer)-pair device number and the inode number assigned by the lower filesystem. - In VFS1, device and inode numbers always come from the lower layer unless "whited out"; this has the adverse effect of requiring interaction with the lower filesystem even for non-directory files that exist on the upper layer. - In VFS2, device and inode numbers are assigned as in Linux, except that xino and the samefs special case are not supported. - Like Linux, but unlike VFS1, VFS2 does not attempt to maintain memory mapping coherence across copy-up. (This may have to change in the future, as users may be dependent on this property.) - Like Linux, but unlike VFS1, VFS2 uses the overlayfs mounter's credentials when interacting with the overlay's layers, rather than the caller's. - Like Linux, but unlike VFS1, VFS2 permits multiple lower layers in an overlay. - Like Linux, but unlike VFS1, VFS2's overlay filesystem is application-mountable. Updates #1199 PiperOrigin-RevId: 316019067
2020-06-10Cgroup fixesFabricio Voznika
- Set hugetlb related fields - Add realtime scheduler related fields - Beef up unit tests Updates #2713 PiperOrigin-RevId: 315797979
2020-06-10Skip pids.max if value is zeroFabricio Voznika
LinuxPids.Limit is the only optional cgroup field in OCI that is not a pointer. If value is 0 or negative it should be skipped. PiperOrigin-RevId: 315791909
2020-06-09Mount root and volumes as read-only if --overlay is enabledFabricio Voznika
PiperOrigin-RevId: 315583963
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 01:18:36 +0000