Age | Commit message (Collapse) | Author |
|
Introduces RPC methods in lisafs. Makes that gofer client use lisafs RPCs
instead of p9 when lisafs is enabled.
Implements the handlers for those methods in fsgofer.
Fixes #5465
PiperOrigin-RevId: 398080310
|
|
lisafs is only supported in VFS2. Added a runsc flag which enables lisafs.
When the flag is enabled, the gofer process and the client communicate using
lisafs protocol instead of 9P.
Added a filesystem option in fsimpl/gofer which indicates if lisafs is being
used. That will be used to gate lisafs on the gofer client.
Note that this change does not make the gofer client use lisafs just yet.
Updates #5465
PiperOrigin-RevId: 397917844
|
|
PiperOrigin-RevId: 397114051
|
|
Add global flags -profile-{block,cpu,heap,mutex} and -trace which
enable collection of the specified profile for the entire duration of a
container execution. This provides a way to definitively start profiling
before that application starts, rather than attempting to race with an
out-of-band `runsc debug`.
Note that only the main boot process is profiled.
This exposed a bug in Task.traceExecEvent: a crash when tracing and
-race are enabled. traceExecEvent is called off of the task goroutine,
but uses the Task as a context, which is a violation of the Task
contract. Switching to the AsyncContext fixes the issue.
Fixes #220
|
|
PiperOrigin-RevId: 396938550
|
|
Replaced the current AddAddressWithOptions method with
AddAddressWithProperties which passes all address properties in
a single AddressProperties type. More properties that need to be
configured in the future are expected, so adding a type makes adding
them easier.
PiperOrigin-RevId: 396930729
|
|
PiperOrigin-RevId: 396754242
|
|
Rootless mode seems to work fine for simple containers with runsc run,
so allow its use.
Since runsc run is more widely used, require a workable --network option
is passed rather than automatically switching like runsc do does.
Fixes #3036
|
|
Updates #220
|
|
PiperOrigin-RevId: 395859347
|
|
This change removes NetworkDispatcher.DeliverOutboundPacket.
Since all packet writes go through the NIC (the only NetworkDispatcher),
we can deliver outgoing packets to interested packet endpoints before
writing the packet to the link endpoint as the stack expects that all
packets that get delivered to a link endpoint are transmitted on the
wire. That is, link endpoints no longer need to let the stack know when
it writes a packet as the stack already knows about the packet it writes
through a link endpoint.
PiperOrigin-RevId: 395761629
|
|
Fixes #6532
PiperOrigin-RevId: 395741741
|
|
...through the loopback interface, only.
This change only supports sending on packet sockets through the loopback
interface as the loopback interface is the only interface used in packet
socket syscall tests - the other link endpoints are not excercised with
the existing test infrastructure.
Support for sending on packet sockets through the other interfaces will
be added as needed.
BUG: https://fxbug.dev/81592
PiperOrigin-RevId: 394368899
|
|
The old implementation was mostly correct but error prone - making way for the
issue in question here. In its error path, it would leak the intermediate file
being walked. Each return/break needed explicit cleanup.
This change implements a more clean way to cleaning up intermediate directories.
If the code were to evolve to be more complex, it would still work.
PiperOrigin-RevId: 392102826
|
|
...to match Linux behaviour.
We can see evidence of Linux representing loopback as an ethernet-based
device below:
```
# EUI-48 based MAC addresses.
$ ip link show lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
# tcpdump showing ethernet frames when sniffing loopback and logging the
# link-type as EN10MB (Ethernet).
$ sudo tcpdump -i lo -e -c 2 -n
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on lo, link-type EN10MB (Ethernet), snapshot length 262144 bytes
03:09:05.002034 00:00:00:00:00:00 > 00:00:00:00:00:00, ethertype IPv4 (0x0800), length 66: 127.0.0.1.9557 > 127.0.0.1.36828: Flags [.], ack 3562800815, win 15342, options [nop,nop,TS val 843174495 ecr 843159493], length 0
03:09:05.002094 00:00:00:00:00:00 > 00:00:00:00:00:00, ethertype IPv4 (0x0800), length 66: 127.0.0.1.36828 > 127.0.0.1.9557: Flags [.], ack 1, win 6160, options [nop,nop,TS val 843174496 ecr 843159493], length 0
2 packets captured
116 packets received by filter
0 packets dropped by kernel
```
Wireshark shows a similar result as the tcpdump example above.
Linux's loopback setup: https://github.com/torvalds/linux/blob/5bfc75d92efd494db37f5c4c173d3639d4772966/drivers/net/loopback.c#L162
PiperOrigin-RevId: 391836719
|
|
Also plumber the controls through runsc
PiperOrigin-RevId: 391594318
|
|
Add Event controls and implement "stream" commands.
PiperOrigin-RevId: 390691702
|
|
Add Usage controls and implement "usage/usagefd" commands.
PiperOrigin-RevId: 390507423
|
|
PiperOrigin-RevId: 390467957
|
|
Refactor mitigate to use /sys/devices/system/cpu/smt/control instead
of individual CPU control files.
PiperOrigin-RevId: 389215975
|
|
Add Fs controls and implement "cat" command.
PiperOrigin-RevId: 388812540
|
|
Also change runsc pause/resume cmd to access Lifecycle instead of
containerManager.
PiperOrigin-RevId: 388534928
|
|
PiperOrigin-RevId: 386988406
|
|
PiperOrigin-RevId: 386511818
|
|
* First, we don't need to poll child processes.
* Second, the 5 seconds timeout is too small if a host is overloaded.
* Third, this can hide bugs in the code when we wait a process that
isn't going to exit.
PiperOrigin-RevId: 386337586
|
|
The gofer session is killed when a gofer backed volume is unmounted. The
gofer monitor catches the disconnect and kills the container. This changes
the gofer monitor to only care about the rootfs connections, which cannot
be unmounted.
Fixes #6259
PiperOrigin-RevId: 385929039
|
|
PiperOrigin-RevId: 385894869
|
|
PiperOrigin-RevId: 384586164
|
|
It was confusing to find functions relating to root and non-root
containers. Replace "non-root" and "subcontainer" and make naming
consistent in Sandbox and controller.
PiperOrigin-RevId: 384512518
|
|
Set stdio ownership based on the container's user to ensure the
user can open/read/write to/from stdios.
1. stdios in the host are changed to have the owner be the same
uid/gid of the process running the sandbox. This ensures that the
sandbox has full control over it.
2. stdios owner owner inside the sandbox is changed to match the
container's user to give access inside the container and make it
behave the same as runc.
Fixes #6180
PiperOrigin-RevId: 384347009
|
|
PiperOrigin-RevId: 384344990
|
|
This patch fixes the local timezone support in logs by creating
etc/localtime in the rootfs of sandbox process and gofer process
based on the current /etc/localtime on host.
Before this patch, the timestamps in sandbox and gofer logs will
fallback to UTC timezone after execving "/proc/self/exe" which
may not be very convenient for users to analyse the logs:
I0708 15:37:43.825100 1 chroot.go:69] Setting up sandbox chroot in "/tmp"
I0708 15:37:43.825189 1 chroot.go:31] Mounting "proc" at "/tmp/proc"
......
I0708 15:37:43.850926 1 cmd.go:73] Execve "/proc/self/exe" again, bye!
I0708 07:37:43.856719 1 main.go:218] ***************************
I0708 07:37:43.856751 1 main.go:219] Args: [runsc-sandbox --root=/run/...]
I0708 07:37:43.856785 1 main.go:220] Version release-20210628.0-27-g02fec8dba5a6
I0708 07:37:43.856795 1 main.go:221] GOOS: linux
I0708 07:37:43.856803 1 main.go:222] GOARCH: amd64
......
Fixes #1984
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
|
|
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
|
|
PiperOrigin-RevId: 383750666
|
|
PiperOrigin-RevId: 383705129
|
|
PiperOrigin-RevId: 382845950
|
|
This change makes the checklocks analyzer considerable more powerful, adding:
* The ability to traverse complex structures, e.g. to have multiple nested
fields as part of the annotation.
* The ability to resolve simple anonymous functions and closures, and perform
lock analysis across these invocations. This does not apply to closures that
are passed elsewhere, since it is not possible to know the context in which
they might be invoked.
* The ability to annotate return values in addition to receivers and other
parameters, with the same complex structures noted above.
* Ignoring locking semantics for "fresh" objects, i.e. objects that are
allocated in the local frame (typically a new-style function).
* Sanity checking of locking state across block transitions and returns, to
ensure that no unexpected locks are held.
Note that initially, most of these findings are excluded by a comprehensive
nogo.yaml. The findings that are included are fundamental lock violations.
The changes here should be relatively low risk, minor refactorings to either
include necessary annotations to simplify the code structure (in general
removing closures in favor of methods) so that the analyzer can be easily
track the lock state.
This change additional includes two changes to nogo itself:
* Sanity checking of all types to ensure that the binary and ast-derived
types have a consistent objectpath, to prevent the bug above from occurring
silently (and causing much confusion). This also requires a trick in
order to ensure that serialized facts are consumable downstream. This can
be removed with https://go-review.googlesource.com/c/tools/+/331789 merged.
* A minor refactoring to isolation the objdump settings in its own package.
This was originally used to implement the sanity check above, but this
information is now being passed another way. The minor refactor is preserved
however, since it cleans up the code slightly and is minimal risk.
PiperOrigin-RevId: 382613300
|
|
Update/remove most syserror errors to linuxerr equivalents. For list
of removed errors, see //pkg/syserror/syserror.go.
PiperOrigin-RevId: 382574582
|
|
PiperOrigin-RevId: 382194711
|
|
PiperOrigin-RevId: 381964660
|
|
PiperOrigin-RevId: 381561785
|
|
Add Equals method to compare syserror and unix.Errno errors to linuxerr errors.
This will facilitate removal of syserror definitions in a followup, and
finding needed conversions from unix.Errno to linuxerr.
PiperOrigin-RevId: 380909667
|
|
The typical sequence of calls to start a container looks like this
ct, err := container.New(conf, containerArgs)
defer ct.Destroy()
ct.Start(conf)
ws, err := ct.Wait()
For the root container, ct.Destroy() kills the sandbox process. This
doesn't look like a right wait to stop it. For example, all ongoing rpc
calls are aborted in this case. If everything is going alright, we can
just wait and it will exit itself.
Reported-by: syzbot+084fca334720887441e7@syzkaller.appspotmail.com
Signed-off-by: Andrei Vagin <avagin@gmail.com>
|
|
...and pass it explicitly.
This reverts commit b63e61828d0652ad1769db342c17a3529d2d24ed.
PiperOrigin-RevId: 380039167
|
|
PiperOrigin-RevId: 378726430
|
|
PiperOrigin-RevId: 378712518
|
|
Fixes #214
PiperOrigin-RevId: 378680466
|
|
PiperOrigin-RevId: 378677167
|
|
It defaults to true and setting it to false can cause filesytem corruption.
PiperOrigin-RevId: 378518663
|
|
HostFileMapper.RegenerateMappings calls mmap with
MAP_SHARED|MAP_FIXED and these were not allowed.
Closes #6116
PiperOrigin-RevId: 377428463
|