Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 218894181
Change-Id: I97d0c74175f4aa528363f768a0a85d6953ea0bfd
|
|
It can be occurred if two controllers are mounted together or if Uninstall() is called on a error path.
PiperOrigin-RevId: 218723886
Change-Id: I69d7a3c0685a7da38527ea8b7b301dbe96268285
|
|
PiperOrigin-RevId: 218636184
Change-Id: I44deac3f32276d06955c5fb1e28c5970bb08f5fd
|
|
This change also adds extensive testing to the p9 package via mocks. The sanity
checks and type checks are moved from the gofer into the core package, where
they can be more easily validated.
PiperOrigin-RevId: 218296768
Change-Id: I4fc3c326e7bf1e0e140a454cbacbcc6fd617ab55
|
|
Errors are shown as being ignored by assigning to the blank identifier.
PiperOrigin-RevId: 218103819
Change-Id: I7cc7b9d8ac503a03de5504ebdeb99ed30a531cf2
|
|
Added events for *ctl syscalls that may have multiple different commands.
For runsc, each syscall event is only logged once. For *ctl syscalls, use
the cmd as identifier, not only the syscall number.
PiperOrigin-RevId: 218015941
Change-Id: Ie3c19131ae36124861e9b492a7dbe1765d9e5e59
|
|
PiperOrigin-RevId: 217951017
Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
|
|
It's hard to resolve symlinks inside the sandbox because rootfs and mounts
may be read-only, forcing us to create mount points inside lower layer of an
overlay, **before** the volumes are mounted.
Since the destination must already be resolved outside the sandbox when creating
mounts, take this opportunity to rewrite the spec with paths resolved.
"runsc boot" will use the "resolved" spec to load mounts. In addition, symlink
traversals were disabled while mounting containers inside the sandbox.
It haven't been able to write a good test for it. So I'm relying on manual tests
for now.
PiperOrigin-RevId: 217749904
Change-Id: I7ac434d5befd230db1488446cda03300cc0751a9
|
|
PiperOrigin-RevId: 217743078
Change-Id: I47fabd88139b968b6183bcc0340065fdbbc1d40d
|
|
We were closing the FD directly. If the test then created a new socket pair
with the same FD, in-flight RPCs would get directed to the new socket and break
the test.
Instead, we should use unet.Socket.Close(), which allows any in-flight RPCs to
finish.
PiperOrigin-RevId: 217608491
Change-Id: I8c5a76638899ba30f33ca976e6fac967fa0aadbf
|
|
Otherwise they may exceed the maximum.
PiperOrigin-RevId: 217584658
Change-Id: I869e400d3409599c0d3b85c6590702c052f49550
|
|
Now containers run with "docker run -it" support control characters like ^C and
^Z.
This required refactoring our signal handling a bit. Signals delivered to the
"runsc boot" process are turned into loader.Signal calls with the appropriate
delivery mode. Previously they were always sent directly to PID 1.
PiperOrigin-RevId: 217566770
Change-Id: I5b7220d9a0f2b591a56335479454a200c6de8732
|
|
PiperOrigin-RevId: 217548429
Change-Id: Ie640c881fdc4fc70af58c8ca834df1ac531e519a
|
|
--pid allows specific processes to be signalled rather than the container root
process or all processes in the container. containerd needs to SIGKILL exec'd
processes that timeout and check whether processes are still alive.
PiperOrigin-RevId: 217547636
Change-Id: I2058ebb548b51c8eb748f5884fb88bad0b532e45
|
|
It has timed out running with kokoro a few times. I passes
consistently on my machine (200+ runsc). Increase the timeout
to see if it helps.
Failure: image_test.go:212: WaitForHTTP() timeout: Get http://localhost:32785/: dial tcp [::1]:32785: connect: connection refused
PiperOrigin-RevId: 217532428
Change-Id: Ibf860aecf537830bef832e436f2e804b3fc12f2d
|
|
This is one of the many tests that fails periodically, making Kokoro unstable.
PiperOrigin-RevId: 217528257
Change-Id: I2508ecf4d74d71b91feff1183544d61d7bd16995
|
|
Sometimes if we try to remove the cgroup directory too soon after killing the
sandbox we EBUSY. This CL adds a retry (up to 5 seconds) for removing.
Deflakes ChrootTest.
PiperOrigin-RevId: 217526909
Change-Id: I749bb172117e2298c9888ecad094072393b94810
|
|
PiperOrigin-RevId: 217433699
Change-Id: Icef08285728c23ee7dd650706aaf18da51c25dff
|
|
We treat handle the boot process stdio separately from the application stdio
(which gets passed via flags), but we were still sending both to same place. As
a result, some logs that are written directly to os.Stderr by the boot process
were ending up in the application logs.
This CL starts sendind boot process stdio to the null device (since we don't
have any better options). The boot process is already configured to send all
logs (and panics) to the log file, so we won't miss anything important.
PiperOrigin-RevId: 217173020
Change-Id: I5ab980da037f34620e7861a3736ba09c18d73794
|
|
The spec command is analygous to the 'runc spec' command and allows for
the convenient creation of a config.json file for users that don't have
runc handy.
Change-Id: Ifdfec37e023048ea461c32da1a9042a45b37d856
PiperOrigin-RevId: 216907826
|
|
This is done to further isolate the gofer from the host.
PiperOrigin-RevId: 216790991
Change-Id: Ia265b77e4e50f815d08f743a05669f9d75ad7a6f
|
|
PiperOrigin-RevId: 216780438
Change-Id: Ide637fe36f8d2a61fea9e5b16d1b3401f2540416
|
|
It's possible for Start() and Wait() calls to race, if the sandboxed
application is short-lived. If the application finishes before (or during) the
Wait RPC, then Wait will fail. In practice this looks like "connection
refused" or "EOF" errors when waiting for an RPC response.
This race is especially bad in tests, where we often run "true" inside a
sandbox.
This CL does a best-effort fix, by returning the sandbox exit status as the
container exit status. In most cases, these are the same.
This fixes the remaining flakes in runsc/container:container_test.
PiperOrigin-RevId: 216777793
Change-Id: I9dfc6e6ec885b106a736055bc7a75b2008dfff7a
|
|
This is a breaking change if you're using --debug-log-dir.
The fix is to replace it with --debug-log and add a '/' at
the end:
--debug-log-dir=/tmp/runsc ==> --debug-log=/tmp/runsc/
PiperOrigin-RevId: 216761212
Change-Id: I244270a0a522298c48115719fa08dad55e34ade1
|
|
Verify that cgroup is being properly set.
PiperOrigin-RevId: 216736137
Change-Id: I0e27fd604eca67e7dd2e3548dc372ca9cc416309
|
|
This change introduces a new flags to create/run called
--user-log. Logs to this files are visible to users and
are meant to help debugging problems with their images
and containers.
For now only unsupported syscalls are sent to this log,
and only minimum support was added. We can build more
infrastructure around it as needed.
PiperOrigin-RevId: 216735977
Change-Id: I54427ca194604991c407d49943ab3680470de2d0
|
|
PiperOrigin-RevId: 216616873
Change-Id: I4d974ab968058eadd01542081e18a987ef08f50a
|
|
When setting Cmd.SysProcAttr.Ctty, the FD must be the FD of the controlling TTY
in the new process, not the current process. The ioctl call is made after
duping all FDs in Cmd.ExtraFiles, which may stomp on the old TTY FD.
This fixes the "bad address" flakes in runsc/container:container_test, although
some other flakes remain.
PiperOrigin-RevId: 216594394
Change-Id: Idfd1677abb866aa82ad7e8be776f0c9087256862
|
|
Change-Id: I1fb9f5b47a264a7617912f6f56f995f3c4c5e578
PiperOrigin-RevId: 216591484
|
|
Currently, in the face of FileMem fragmentation and a large sendmsg or
recvmsg call, host sockets may pass > 1024 iovecs to the host, which
will immediately cause the host to return EMSGSIZE.
When we detect this case, use a single intermediate buffer to pass to
the kernel, copying to/from the src/dst buffer.
To avoid creating unbounded intermediate buffers, enforce message size
checks and truncation w.r.t. the send buffer size. The same
functionality is added to netstack unix sockets for feature parity.
PiperOrigin-RevId: 216590198
Change-Id: I719a32e71c7b1098d5097f35e6daf7dd5190eff7
|
|
Sandbox creation uses the limits and reservations configured in the
OCI spec and set cgroup options accordinly. Then it puts both the
sandbox and gofer processes inside the cgroup.
It also allows the cgroup to be pre-configured by the caller. If the
cgroup already exists, sandbox and gofer processes will join the
cgroup but it will not modify the cgroup with spec limits.
PiperOrigin-RevId: 216538209
Change-Id: If2c65ffedf55820baab743a0edcfb091b89c1019
|
|
PiperOrigin-RevId: 216472439
Change-Id: Ic4cb86c8e0a9cb022d3ceed9dc5615266c307cf9
|
|
PiperOrigin-RevId: 216431260
Change-Id: Ia6e5c8d506940148d10ff2884cf4440f470e5820
|
|
We were previously only sending to the originator of the process group.
Integration test was changed to test this behavior. It fails without the
corresponding code change.
PiperOrigin-RevId: 216297263
Change-Id: I7e41cfd6bdd067f4b9dc215e28f555fb5088916f
|
|
PiperOrigin-RevId: 216281263
Change-Id: Ie0c189e7f5934b77c6302336723bc1181fd2866c
|
|
Docker and Containerd both eat the boot processes stderr, making it difficult
to track down panics (which are always written to stderr).
This CL makes the boot process dup its debug log FD to stderr, so that panics
will be captured in the debug log, which is better than nothing.
This is the 3rd try at this CL. Previous attempts were foiled because Docker
expects the 'create' command to pass its stdio directly to the container, so
duping stderr in 'create' caused the applications stderr to go to the log file,
which breaks many applications (including our mysql test).
I added a new image_test that makes sure stdout and stderr are handled
correctly.
PiperOrigin-RevId: 215767328
Change-Id: Icebac5a5dcf39b623b79d7a0e2f968e059130059
|
|
Sandbox was setting chroot, but was not chaging the working
dir. Added test to ensure this doesn't happen in the future.
PiperOrigin-RevId: 215676270
Change-Id: I14352d3de64a4dcb90e50948119dc8328c9c15e1
|
|
PiperOrigin-RevId: 215633475
Change-Id: I7bc471e3b9a2c725fb5e15b3bbcba2ee1ea574b1
|
|
This can happen if an error is encountered during Create() which causes the
container to be destroyed and set to state Stopped.
Without this transition, errors during Create get hidden by the later panic.
PiperOrigin-RevId: 215599193
Change-Id: Icd3f42e12c685cbf042f46b3929bccdf30ad55b0
|
|
We add an additional (2^3)-1=7 processes, but the code was only waiting for 3.
I switched back to Math.Pow format to make the arithmetic easier to inspect.
PiperOrigin-RevId: 215588140
Change-Id: Iccad4d6f977c1bfc5c4b08d3493afe553fe25733
|
|
Docker and containerd do not expose runsc's stderr, so tracking down sentry
panics can be painful.
If we have a debug log file, we should send panics (and all stderr data) to the
log file.
PiperOrigin-RevId: 215585559
Change-Id: I3844259ed0cd26e26422bcdb40dded302740b8b6
|
|
We were previously using the sandbox process's stdio as the root container's
stdio. This makes it difficult/impossible to distinguish output application
output from sandbox output, such as panics, which are always written to stderr.
Also close the console socket when we are done with it.
PiperOrigin-RevId: 215585180
Change-Id: I980b8c69bd61a8b8e0a496fd7bc90a06446764e0
|
|
PiperOrigin-RevId: 215574070
Change-Id: Ib36e804adebaf756adb9cbc2752be9789691530b
|
|
PiperOrigin-RevId: 215489101
Change-Id: Iaf96aa8edb1101b70548030c62995841215237d9
|
|
Docker.Run only returns a single argument.
PiperOrigin-RevId: 215427309
Change-Id: I1eebbc628853ca57f79d25e18d4f04dfa5a2a003
|
|
Terminal support in runsc relies on host tty file descriptors that are imported
into the sandbox. Application tty ioctls are sent directly to the host fd.
However, those host tty ioctls are associated in the host kernel with a host
process (in this case runsc), and the host kernel intercepts job control
characters like ^C and send signals to the host process. Thus, typing ^C into a
"runsc exec" shell will send a SIGINT to the runsc process.
This change makes "runsc exec" handle all signals, and forward them into the
sandbox via the "ContainerSignal" urpc method. Since the "runsc exec" is
associated with a particular container process in the sandbox, the signal must
be associated with the same container process.
One big difficulty is that the signal should not necessarily be sent to the
sandbox process started by "exec", but instead must be sent to the foreground
process group for the tty. For example, we may exec "bash", and from bash call
"sleep 100". A ^C at this point should SIGINT sleep, not bash.
To handle this, tty files inside the sandbox must keep track of their
foreground process group, which is set/get via ioctls. When an incoming
ContainerSignal urpc comes in, we look up the foreground process group via the
tty file. Unfortunately, this means we have to expose and cache the tty file in
the Loader.
Note that "runsc exec" now handles signals properly, but "runs run" does not.
That will come in a later CL, as this one is complex enough already.
Example:
root@:/usr/local/apache2# sleep 100
^C
root@:/usr/local/apache2# sleep 100
^Z
[1]+ Stopped sleep 100
root@:/usr/local/apache2# fg
sleep 100
^C
root@:/usr/local/apache2#
PiperOrigin-RevId: 215334554
Change-Id: I53cdce39653027908510a5ba8d08c49f9cf24f39
|
|
PiperOrigin-RevId: 215274663
Change-Id: I051721f459084db3aa608432831170cd47ae7df0
|
|
And remove multicontainer option.
PiperOrigin-RevId: 215236981
Change-Id: I9fd1d963d987e421e63d5817f91a25c819ced6cb
|
|
This makes runsc more friendly to run without docker or K8s.
PiperOrigin-RevId: 215165586
Change-Id: Id45a9fc24a3c09b1645f60dbaf70e64711a7a4cd
|
|
PiperOrigin-RevId: 215162121
Change-Id: I35f06ac3235cf31c9e8a158dcf6261a7ded6c4c4
|