summaryrefslogtreecommitdiffhomepage
path: root/runsc
AgeCommit message (Collapse)Author
2020-12-17Set max memory not minFabricio Voznika
Closes #5048 PiperOrigin-RevId: 348050472
2020-12-15fsgofer optimizationsFabricio Voznika
- Skip chown call in case owner change is not needed - Skip filepath.Clean() calls when joining paths - Pass unix.Stat_t by value to reduce runtime.duffcopy calls. This change allows for better inlining in localFile.walk(). Change Baseline Improvement BenchmarkWalkOne-6 2912 ns/op 3082 ns/op 5.5% BenchmarkCreate-6 15915 ns/op 19126 ns/op 16.8% BenchmarkCreateDiffOwner-6 18795 ns/op 19741 ns/op 4.8% PiperOrigin-RevId: 347667833
2020-12-14[netstack] Update raw socket and hostinet control message parsing.Ayush Ranjan
There are surprisingly few syscall tests that run with hostinet. For example running the following command only returns two results: `bazel query test/syscalls:all | grep hostnet` I think as a result, as our control messages evolved, hostinet was left behind. Update it to support all control messages netstack supports. This change also updates sentry's control message parsing logic to make it up to date with all the control messages we support. PiperOrigin-RevId: 347508892
2020-12-11Add runsc symbolize command.Dean Deng
This command takes instruction pointers from stdin and converts them into their corresponding file names and line/column numbers in the runsc source code. The inputs are not interpreted as actual addresses, but as synthetic values that are exposed through /sys/kernel/debug/kcov. One can extract coverage information from kcov and translate those values into locations in the source code by running symbolize on the same runsc binary. This will allow us to generate syzkaller coverage reports. PiperOrigin-RevId: 347089624
2020-12-11Remove existing nogo exceptions.Adin Scannell
PiperOrigin-RevId: 347047550
2020-12-10Disable host reassembly for fragments.Bhasker Hariharan
fdbased endpoint was enabling fragment reassembly on the host AF_PACKET socket to ensure that fragments are delivered inorder to the right dispatcher. But this prevents fragments from being delivered to gvisor at all and makes testing of gvisor's fragment reassembly code impossible. The potential impact from this is minimal since IP Fragmentation is not really that prevelant and in cases where we do get fragments we may deliver the fragment out of order to the TCP layer as multiple network dispatchers may process the fragments and deliver a reassembled fragment after the next packet has been delivered to the TCP endpoint. While not desirable I believe the impact from this is minimal due to low prevalence of fragmentation. Also removed PktType and Hatype fields when binding the socket as these are not used when binding. Its just confusing to have them specified. See: https://man7.org/linux/man-pages/man7/packet.7.html "Fields used for binding are sll_family (should be AF_PACKET), sll_protocol, and sll_ifindex." Fixes #5055 PiperOrigin-RevId: 346919439
2020-12-09Tweak aarch64 support.Adin Scannell
A few images were broken with respect to aarch64. We should now be able to run push-all-images with ARCH=aarch64 as part of the regular continuous integration builds, and add aarch64 smoke tests (via user emulation for now) to the regular test suite (future). PiperOrigin-RevId: 346685462
2020-12-07Support icmpv6 transport protocolPeter Johnston
PiperOrigin-RevId: 346101076
2020-12-04Overlay runsc regular file mounts with regular files.Jamie Liu
Fixes #4991 PiperOrigin-RevId: 345800333
2020-12-03Surface usage message for `runsc do`.Dean Deng
c.Usage() only returns a string; f.Usage() will print the usage message. PiperOrigin-RevId: 345500123
2020-12-03Support partitions for other tests.Adin Scannell
PiperOrigin-RevId: 345399936
2020-11-19Propagate IP address prefix from host to netstackFabricio Voznika
Closes #4022 PiperOrigin-RevId: 343378647
2020-11-18runsc: check whether cgroup exists or not for each controllerAndrei Vagin
We have seen a case when a memory cgroup exists but a perf_event one doesn't. Reported-by: syzbot+f31468b61d1a27e629dc@syzkaller.appspotmail.com Reported-by: syzbot+1f163ec0321768f1497e@syzkaller.appspotmail.com PiperOrigin-RevId: 343200070
2020-11-18Fix race condition in multi-container wait testFabricio Voznika
Container is not thread-safe, locking must be done in the caller. The test was calling Container.Wait() from multiple threads with no synchronization. Also removed Container.WaitPID from test because the process might have already existed when wait is called. PiperOrigin-RevId: 343176280
2020-11-17Add support for TTY in multi-containerFabricio Voznika
Fixes #2714 PiperOrigin-RevId: 342950412
2020-11-16Remove ARP address workaroundGhanan Gowripalan
- Make AddressableEndpoint optional for NetworkEndpoint. Not all NetworkEndpoints need to support addressing (e.g. ARP), so AddressableEndpoint should only be implemented for protocols that support addressing such as IPv4 and IPv6. With this change, tcpip.ErrNotSupported will be returned by the stack when attempting to modify addresses on a network endpoint that does not support addressing. Now that packets are fully handled at the network layer, and (with this change) addresses are optional for network endpoints, we no longer need the workaround for ARP where a fake ARP address was added to each NIC that performs ARP so that packets would be delivered to the ARP layer. PiperOrigin-RevId: 342722547
2020-11-12Remove TESTONLY tag from vfs2 flagFabricio Voznika
Updates #1035 PiperOrigin-RevId: 342168926
2020-11-05Re-add start/stop container testsFabricio Voznika
Due to a type doDestroyNotStartedTest was being tested 2x instead of doDestroyStartingTest. PiperOrigin-RevId: 340969797
2020-11-05Return failure when `runsc events` queries a stopped containerFabricio Voznika
This was causing gvisor-containerd-shim to crash because the command suceeded, but there was no stat present. PiperOrigin-RevId: 340964921
2020-11-05Fix failure setting OOM score adjustmentFabricio Voznika
When OOM score adjustment needs to be set, all the containers need to be loaded to find all containers that belong to the sandbox. However, each load signals the container to ensure it is still alive. OOM score adjustment is set during creation and deletion of every container, generating a flood of signals to all containers. The fix removes the signal check when it's not needed. There is also a race fetching OOM score adjustment value from the parent when the sandbox exits at the same time (the time it took to signal containers above made this window quite large). The fix is to store the original value in the sandbox state file and use it when the value needs to be restored. Also add more logging and made the existing ones more consistent to help with debugging. PiperOrigin-RevId: 340940799
2020-11-03Fix more nogo testsTing-Yu Wang
PiperOrigin-RevId: 340536306
2020-10-29Keep magic constants out of netstackKevin Krakauer
PiperOrigin-RevId: 339721152
2020-10-28Add logging option to leak checker.Dean Deng
Also refactor the template and CheckedObject interface to make this cleaner. Updates #1486. PiperOrigin-RevId: 339577120
2020-10-27Merge pull request #4587 from lnsp:stacktracegVisor bot
PiperOrigin-RevId: 339385609
2020-10-27Add more cgroup unit testsFabricio Voznika
PiperOrigin-RevId: 339380431
2020-10-27Merge pull request #4420 from workato:dev-optionsgVisor bot
PiperOrigin-RevId: 339363816
2020-10-26Allow overriding mount options for /dev and /dev/ptsKonstantin Baranov
This is useful to optionally set /dev ro,noexec. Treat /dev and /dev/pts the same as /proc and /sys. Make sure the Type is right though. Many config.json snippets on the Internet suggest /dev is tmpfs, not devtmpfs.
2020-10-23Fix nogo errors in specutilsFabricio Voznika
PiperOrigin-RevId: 338780793
2020-10-23Support VFS2 save/restore.Jamie Liu
Inode number consistency checks are now skipped in save/restore tests for reasons described in greatest detail in StatTest.StateDoesntChangeAfterRename. They pass in VFS1 due to the bug described in new test case SimpleStatTest.DifferentFilesHaveDifferentDeviceInodeNumberPairs. Fixes #1663 PiperOrigin-RevId: 338776148
2020-10-23Rewrite reference leak checker without finalizers.Dean Deng
Our current reference leak checker uses finalizers to verify whether an object has reached zero references before it is garbage collected. There are multiple problems with this mechanism, so a rewrite is in order. With finalizers, there is no way to guarantee that a finalizer will run before the program exits. When an unreachable object with a finalizer is garbage collected, its finalizer will be added to a queue and run asynchronously. The best we can do is run garbage collection upon sandbox exit to make sure that all finalizers are enqueued. Furthermore, if there is a chain of finalized objects, e.g. A points to B points to C, garbage collection needs to run multiple times before all of the finalizers are enqueued. The first GC run will register the finalizer for A but not free it. It takes another GC run to free A, at which point B's finalizer can be registered. As a result, we need to run GC as many times as the length of the longest such chain to have a somewhat reliable leak checker. Finally, a cyclical chain of structs pointing to one another will never be garbage collected if a finalizer is set. This is a well-known issue with Go finalizers (https://github.com/golang/go/issues/7358). Using leak checking on filesystem objects that produce cycles will not work and even result in memory leaks. The new leak checker stores reference counted objects in a global map when leak check is enabled and removes them once they are destroyed. At sandbox exit, any remaining objects in the map are considered as leaked. This provides a deterministic way of detecting leaks without relying on the complexities of finalizers and garbage collection. This approach has several benefits over the former, including: - Always detects leaks of objects that should be destroyed very close to sandbox exit. The old checker very rarely detected these leaks, because it relied on garbage collection to be run in a short window of time. - Panics if we forgot to enable leak check on a ref-counted object (we will try to remove it from the map when it is destroyed, but it will never have been added). - Can store extra logging information in the map values without adding to the size of the ref count struct itself. With the size of just an int64, the ref count object remains compact, meaning frequent operations like IncRef/DecRef are more cache-efficient. - Can aggregate leak results in a single report after the sandbox exits. Instead of having warnings littered in the log, which were non-deterministically triggered by garbage collection, we can print all warning messages at once. Note that this could also be a limitation--the sandbox must exit properly for leaks to be detected. Some basic benchmarking indicates that this change does not significantly affect performance when leak checking is enabled, which is understandable since registering/unregistering is only done once for each filesystem object. Updates #1486. PiperOrigin-RevId: 338685972
2020-10-23Add --traceback flag to customize GOTRACEBACK levelLennart Espe
2020-10-22Load spec during "runsc start" to process flag overridesFabricio Voznika
Subcontainers are only configured when the container starts, however because start doesn't load the spec, flag annotations that may override flags were not getting applied to the configuration. Updates #3494 PiperOrigin-RevId: 338610953
2020-10-21Merge pull request #3957 from workato:auto-cgroupgVisor bot
PiperOrigin-RevId: 338372736
2020-10-20Do not even try forcing cgroups in testsKonstantin Baranov
2020-10-20Add /dev to mandatory mounts testFabricio Voznika
PiperOrigin-RevId: 338072845
2020-10-19Fix runsc tests on VFS2 overlay.Jamie Liu
- Check the sticky bit in overlay.filesystem.UnlinkAt(). Fixes StickyTest.StickyBitPermDenied. - When configuring a VFS2 overlay in runsc, copy the lower layer's root owner/group/mode to the upper layer's root (as in the VFS1 equivalent, boot.addOverlay()). This makes the overlay root owned by UID/GID 65534 with mode 0755 rather than owned by UID/GID 0 with mode 01777. Fixes CreateTest.CreateFailsOnUnpermittedDir, which assumes that the test cannot create files in /. - MknodTest.UnimplementedTypesReturnError assumes that the creation of device special files is not supported. However, while the VFS2 gofer client still doesn't support device special files, VFS2 tmpfs does, and in the overlay test dimension mknod() targets a tmpfs upper layer. The test initially has all capabilities, including CAP_MKNOD, so its creation of these files succeeds. Constrain these tests to VFS1. - Rename overlay.nonDirectoryFD to overlay.regularFileFD and only use it for regular files, using the original FD for pipes and device special files. This is more consistent with Linux (which gets the original inode_operations, and therefore file_operations, for these file types from ovl_fill_inode() => init_special_inode()) and fixes remaining mknod and pipe tests. - Read/write 1KB at a time in PipeTest.Streaming, rather than 4 bytes. This isn't strictly necessary, but it makes the test less obnoxiously slow on ptrace. Fixes #4407 PiperOrigin-RevId: 337971042
2020-10-19Remove legacy bazel configurations.Adin Scannell
Using the newer bazel rules necessitates a transition from proto1 to proto2. In order to resolve the incompatibility between proto2 and gogoproto, the cri runtimeoptions proto must be vendored. Further, some of the semantics of bazel caching changed during the transition. It is now necessary to: - Ensure that :gopath depends only on pure library targets, as the propagation of go_binary build attributes (pure, static) will affected the generated files (though content remains the same, there are conflicts with respect to the gopath). - Update bazel.mk to include the possibility of binaries in the bazel-out directory, as it will now put runsc and others there. This required some refinements to the mechanism of extracting paths, since some the existing regex resulted in false positives. - Change nogo rules to prevent escape generation on binary targets. For some reason, the newer version of bazel attempted to run the nogo analysis on the binary targets, which fails due to the fact that objdump does not work on the final binary. This must be due to a change in the semantics of aspects in bazel3. PiperOrigin-RevId: 337958324
2020-10-19Fixes to cgroupsFabricio Voznika
There were a few problems with cgroups: - cleanup loop what breaking too early - parse of /proc/[pid]/cgroups was skipping "name=systemd" because "name=" was not being removed from name. - When no limits are specified, fillFromAncestor was not being called, causing a failure to set cpuset.mems Updates #4536 PiperOrigin-RevId: 337947356
2020-10-15`runsc do` fallback to internal network on failureFabricio Voznika
In case setting up network fails, log a warning and fallback to internal network. Closes #4498 PiperOrigin-RevId: 337442632
2020-10-13[vfs2] Don't take reference in Task.MountNamespaceVFS2 and MountNamespace.Root.Dean Deng
This fixes reference leaks related to accidentally forgetting to DecRef() after calling one or the other. PiperOrigin-RevId: 336918922
2020-10-12[vfs2] Don't leak disconnected mounts.Dean Deng
PiperOrigin-RevId: 336694658
2020-10-07Add staticcheck and staticstyle analyzers.Adin Scannell
This change also adds support to go_stateify for detecting an appropriate receiver name, avoiding a large number of false positives. PiperOrigin-RevId: 335994587
2020-10-06Ignore errors in rootless and test modesKonstantin Baranov
2020-10-06Merge pull request #4355 from majek:marek/swallow-SO_RCVBUFFORCE-errorgVisor bot
PiperOrigin-RevId: 335714100
2020-10-06Implement membarrier(2) commands other than *_SYNC_CORE.Jamie Liu
Updates #267 PiperOrigin-RevId: 335713923
2020-10-05Fix gofer monitor prematurely destroying containerFabricio Voznika
When all container tasks finish, they release the mount which in turn will close the 9P session to the gofer. The gofer exits when the connection closes, triggering the gofer monitor. The gofer monitor will _think_ that the gofer died prematurely and destroy the container. Then when the caller attempts to wait for the container, e.g. to get the exit code, wait fails saying the container doesn't exist. Gofer monitor now just SIGKILLs the container, and let the normal teardown process to happen, which will evetually destroy the container at the right time. Also, fixed an issue with exec racing with container's init process exiting. Closes #1487 PiperOrigin-RevId: 335537350
2020-10-05Merge pull request #3970 from benbuzbee:gomaxprocsgVisor bot
PiperOrigin-RevId: 335516972
2020-10-05Enable more VFS2 testsFabricio Voznika
Updates #1487 PiperOrigin-RevId: 335516732
2020-10-02Treat absent "linux" section is empty "cgroupsPath" tooKonstantin Baranov
2020-09-30Use consistent thread configuration for sandbox go runtimeBen Buzbee
With cgroups configured NumCPU is correct, however GOMAXPROCS is still derived from total host core count and ignores cgroup restrictions. This can lead to different and undesired behavior across different hosts. For example, the total number of threads in the guest process will be larger on machines with more cores. This change configures the go runtime for the sandbox to only use the number of threads consistent with its restrictions.