| Age | Commit message (Collapse) | Author |
|---|
|
PiperOrigin-RevId: 350159657
|
|
Closes #5052
PiperOrigin-RevId: 349579814
|
|
This allows for a model of profiling when you can start collection, and
it will terminate when the sandbox terminates. Without this synchronous
call, it is effectively impossible to collect length blocking and mutex
profiles.
PiperOrigin-RevId: 349483418
|
|
PiperOrigin-RevId: 348106699
|
|
PiperOrigin-RevId: 348055514
|
|
This allows to find all containers inside a sandbox more efficiently.
This operation is required every time a container starts and stops,
and previously required loading *all* container state files to check
whether the container belonged to the sandbox.
Apert from being inneficient, it has caused problems when state files
are stale or corrupt, causing inavalability to create any container.
Also adjust commands `list` and `debug` to skip over files that fail
to load.
Resolves #5052
PiperOrigin-RevId: 348050637
|
|
Closes #5048
PiperOrigin-RevId: 348050472
|
|
- Skip chown call in case owner change is not needed
- Skip filepath.Clean() calls when joining paths
- Pass unix.Stat_t by value to reduce runtime.duffcopy calls.
This change allows for better inlining in localFile.walk().
Change Baseline Improvement
BenchmarkWalkOne-6 2912 ns/op 3082 ns/op 5.5%
BenchmarkCreate-6 15915 ns/op 19126 ns/op 16.8%
BenchmarkCreateDiffOwner-6 18795 ns/op 19741 ns/op 4.8%
PiperOrigin-RevId: 347667833
|
|
There are surprisingly few syscall tests that run with hostinet. For example
running the following command only returns two results:
`bazel query test/syscalls:all | grep hostnet`
I think as a result, as our control messages evolved, hostinet was left
behind. Update it to support all control messages netstack supports.
This change also updates sentry's control message parsing logic to make it up to
date with all the control messages we support.
PiperOrigin-RevId: 347508892
|
|
This command takes instruction pointers from stdin and converts them into their
corresponding file names and line/column numbers in the runsc source code. The
inputs are not interpreted as actual addresses, but as synthetic values that are
exposed through /sys/kernel/debug/kcov. One can extract coverage information
from kcov and translate those values into locations in the source code by
running symbolize on the same runsc binary.
This will allow us to generate syzkaller coverage reports.
PiperOrigin-RevId: 347089624
|
|
PiperOrigin-RevId: 347047550
|
|
fdbased endpoint was enabling fragment reassembly on the host AF_PACKET socket
to ensure that fragments are delivered inorder to the right dispatcher. But this
prevents fragments from being delivered to gvisor at all and makes testing of
gvisor's fragment reassembly code impossible.
The potential impact from this is minimal since IP Fragmentation is not really
that prevelant and in cases where we do get fragments we may deliver the
fragment out of order to the TCP layer as multiple network dispatchers may
process the fragments and deliver a reassembled fragment after the next packet
has been delivered to the TCP endpoint. While not desirable I believe the impact
from this is minimal due to low prevalence of fragmentation.
Also removed PktType and Hatype fields when binding the socket as these are not
used when binding. Its just confusing to have them specified.
See: https://man7.org/linux/man-pages/man7/packet.7.html
"Fields used for binding are
sll_family (should be AF_PACKET), sll_protocol, and sll_ifindex."
Fixes #5055
PiperOrigin-RevId: 346919439
|
|
A few images were broken with respect to aarch64. We should now
be able to run push-all-images with ARCH=aarch64 as part of the
regular continuous integration builds, and add aarch64 smoke tests
(via user emulation for now) to the regular test suite (future).
PiperOrigin-RevId: 346685462
|
|
PiperOrigin-RevId: 346101076
|
|
Fixes #4991
PiperOrigin-RevId: 345800333
|
|
c.Usage() only returns a string; f.Usage() will print the usage message.
PiperOrigin-RevId: 345500123
|
|
PiperOrigin-RevId: 345399936
|
|
Closes #4022
PiperOrigin-RevId: 343378647
|
|
We have seen a case when a memory cgroup exists but a perf_event one doesn't.
Reported-by: syzbot+f31468b61d1a27e629dc@syzkaller.appspotmail.com
Reported-by: syzbot+1f163ec0321768f1497e@syzkaller.appspotmail.com
PiperOrigin-RevId: 343200070
|
|
Container is not thread-safe, locking must be done in the caller.
The test was calling Container.Wait() from multiple threads with
no synchronization.
Also removed Container.WaitPID from test because the process might
have already existed when wait is called.
PiperOrigin-RevId: 343176280
|
|
Fixes #2714
PiperOrigin-RevId: 342950412
|
|
- Make AddressableEndpoint optional for NetworkEndpoint.
Not all NetworkEndpoints need to support addressing (e.g. ARP), so
AddressableEndpoint should only be implemented for protocols that
support addressing such as IPv4 and IPv6.
With this change, tcpip.ErrNotSupported will be returned by the stack
when attempting to modify addresses on a network endpoint that does
not support addressing.
Now that packets are fully handled at the network layer, and (with this
change) addresses are optional for network endpoints, we no longer need
the workaround for ARP where a fake ARP address was added to each NIC
that performs ARP so that packets would be delivered to the ARP layer.
PiperOrigin-RevId: 342722547
|
|
Updates #1035
PiperOrigin-RevId: 342168926
|
|
Due to a type doDestroyNotStartedTest was being tested
2x instead of doDestroyStartingTest.
PiperOrigin-RevId: 340969797
|
|
This was causing gvisor-containerd-shim to crash because the command
suceeded, but there was no stat present.
PiperOrigin-RevId: 340964921
|
|
When OOM score adjustment needs to be set, all the containers need to be
loaded to find all containers that belong to the sandbox. However, each
load signals the container to ensure it is still alive. OOM score
adjustment is set during creation and deletion of every container, generating
a flood of signals to all containers. The fix removes the signal check
when it's not needed.
There is also a race fetching OOM score adjustment value from the parent when
the sandbox exits at the same time (the time it took to signal containers above
made this window quite large). The fix is to store the original value
in the sandbox state file and use it when the value needs to be restored.
Also add more logging and made the existing ones more consistent to help with
debugging.
PiperOrigin-RevId: 340940799
|
|
PiperOrigin-RevId: 340536306
|
|
PiperOrigin-RevId: 339721152
|
|
Also refactor the template and CheckedObject interface to make this cleaner.
Updates #1486.
PiperOrigin-RevId: 339577120
|
|
PiperOrigin-RevId: 339385609
|
|
PiperOrigin-RevId: 339380431
|
|
PiperOrigin-RevId: 339363816
|
|
This is useful to optionally set /dev ro,noexec.
Treat /dev and /dev/pts the same as /proc and /sys.
Make sure the Type is right though. Many config.json snippets
on the Internet suggest /dev is tmpfs, not devtmpfs.
|
|
PiperOrigin-RevId: 338780793
|
|
Inode number consistency checks are now skipped in save/restore tests for
reasons described in greatest detail in StatTest.StateDoesntChangeAfterRename.
They pass in VFS1 due to the bug described in new test case
SimpleStatTest.DifferentFilesHaveDifferentDeviceInodeNumberPairs.
Fixes #1663
PiperOrigin-RevId: 338776148
|
|
Our current reference leak checker uses finalizers to verify whether an object
has reached zero references before it is garbage collected. There are multiple
problems with this mechanism, so a rewrite is in order.
With finalizers, there is no way to guarantee that a finalizer will run before
the program exits. When an unreachable object with a finalizer is garbage
collected, its finalizer will be added to a queue and run asynchronously. The
best we can do is run garbage collection upon sandbox exit to make sure that
all finalizers are enqueued.
Furthermore, if there is a chain of finalized objects, e.g. A points to B
points to C, garbage collection needs to run multiple times before all of the
finalizers are enqueued. The first GC run will register the finalizer for A but
not free it. It takes another GC run to free A, at which point B's finalizer
can be registered. As a result, we need to run GC as many times as the length
of the longest such chain to have a somewhat reliable leak checker.
Finally, a cyclical chain of structs pointing to one another will never be
garbage collected if a finalizer is set. This is a well-known issue with Go
finalizers (https://github.com/golang/go/issues/7358). Using leak checking on
filesystem objects that produce cycles will not work and even result in memory
leaks.
The new leak checker stores reference counted objects in a global map when
leak check is enabled and removes them once they are destroyed. At sandbox
exit, any remaining objects in the map are considered as leaked. This provides
a deterministic way of detecting leaks without relying on the complexities of
finalizers and garbage collection.
This approach has several benefits over the former, including:
- Always detects leaks of objects that should be destroyed very close to
sandbox exit. The old checker very rarely detected these leaks, because it
relied on garbage collection to be run in a short window of time.
- Panics if we forgot to enable leak check on a ref-counted object (we will try
to remove it from the map when it is destroyed, but it will never have been
added).
- Can store extra logging information in the map values without adding to the
size of the ref count struct itself. With the size of just an int64, the ref
count object remains compact, meaning frequent operations like IncRef/DecRef
are more cache-efficient.
- Can aggregate leak results in a single report after the sandbox exits.
Instead of having warnings littered in the log, which were
non-deterministically triggered by garbage collection, we can print all
warning messages at once. Note that this could also be a limitation--the
sandbox must exit properly for leaks to be detected.
Some basic benchmarking indicates that this change does not significantly
affect performance when leak checking is enabled, which is understandable
since registering/unregistering is only done once for each filesystem object.
Updates #1486.
PiperOrigin-RevId: 338685972
|
|
|
|
Subcontainers are only configured when the container starts, however because
start doesn't load the spec, flag annotations that may override flags were
not getting applied to the configuration.
Updates #3494
PiperOrigin-RevId: 338610953
|
|
PiperOrigin-RevId: 338372736
|
|
|
|
PiperOrigin-RevId: 338072845
|
|
- Check the sticky bit in overlay.filesystem.UnlinkAt(). Fixes
StickyTest.StickyBitPermDenied.
- When configuring a VFS2 overlay in runsc, copy the lower layer's root
owner/group/mode to the upper layer's root (as in the VFS1 equivalent,
boot.addOverlay()). This makes the overlay root owned by UID/GID 65534 with
mode 0755 rather than owned by UID/GID 0 with mode 01777. Fixes
CreateTest.CreateFailsOnUnpermittedDir, which assumes that the test cannot
create files in /.
- MknodTest.UnimplementedTypesReturnError assumes that the creation of device
special files is not supported. However, while the VFS2 gofer client still
doesn't support device special files, VFS2 tmpfs does, and in the overlay
test dimension mknod() targets a tmpfs upper layer. The test initially has
all capabilities, including CAP_MKNOD, so its creation of these files
succeeds. Constrain these tests to VFS1.
- Rename overlay.nonDirectoryFD to overlay.regularFileFD and only use it for
regular files, using the original FD for pipes and device special files. This
is more consistent with Linux (which gets the original inode_operations, and
therefore file_operations, for these file types from ovl_fill_inode() =>
init_special_inode()) and fixes remaining mknod and pipe tests.
- Read/write 1KB at a time in PipeTest.Streaming, rather than 4 bytes. This
isn't strictly necessary, but it makes the test less obnoxiously slow on
ptrace.
Fixes #4407
PiperOrigin-RevId: 337971042
|
|
Using the newer bazel rules necessitates a transition from proto1 to
proto2. In order to resolve the incompatibility between proto2 and
gogoproto, the cri runtimeoptions proto must be vendored.
Further, some of the semantics of bazel caching changed during the
transition. It is now necessary to:
- Ensure that :gopath depends only on pure library targets, as the
propagation of go_binary build attributes (pure, static) will
affected the generated files (though content remains the same,
there are conflicts with respect to the gopath).
- Update bazel.mk to include the possibility of binaries in the
bazel-out directory, as it will now put runsc and others there.
This required some refinements to the mechanism of extracting
paths, since some the existing regex resulted in false positives.
- Change nogo rules to prevent escape generation on binary targets.
For some reason, the newer version of bazel attempted to run the
nogo analysis on the binary targets, which fails due to the fact
that objdump does not work on the final binary. This must be due
to a change in the semantics of aspects in bazel3.
PiperOrigin-RevId: 337958324
|
|
There were a few problems with cgroups:
- cleanup loop what breaking too early
- parse of /proc/[pid]/cgroups was skipping "name=systemd"
because "name=" was not being removed from name.
- When no limits are specified, fillFromAncestor was not being
called, causing a failure to set cpuset.mems
Updates #4536
PiperOrigin-RevId: 337947356
|
|
In case setting up network fails, log a warning and fallback to internal
network.
Closes #4498
PiperOrigin-RevId: 337442632
|
|
This fixes reference leaks related to accidentally forgetting to DecRef()
after calling one or the other.
PiperOrigin-RevId: 336918922
|
|
PiperOrigin-RevId: 336694658
|
|
This change also adds support to go_stateify for detecting an appropriate
receiver name, avoiding a large number of false positives.
PiperOrigin-RevId: 335994587
|
|
|
|
PiperOrigin-RevId: 335714100
|
