summaryrefslogtreecommitdiffhomepage
path: root/runsc
AgeCommit message (Collapse)Author
2020-02-25Add log during process wait in testsFabricio Voznika
TestMultiContainerKillAll timed out under --race. Without logging, we cannot tell if the process list is still increasing, but slowly, or is stuck. PiperOrigin-RevId: 297158834
2020-02-20Initial network namespace support.gVisor bot
TCP/IP will work with netstack networking. hostinet doesn't work, and sockets will have the same behavior as it is now. Before the userspace is able to create device, the default loopback device can be used to test. /proc/net and /sys/net will still be connected to the root network stack; this is the same behavior now. Issue #1833 PiperOrigin-RevId: 296309389
2020-02-19Add statefile command to runsc.Adin Scannell
PiperOrigin-RevId: 296105337
2020-02-14Synchronize signalling with S/RgVisor bot
This is to fix a data race between sending an external signal to a ThreadGroup and kernel saving state for S/R. PiperOrigin-RevId: 295244281
2020-02-14Plumb VFS2 inside the SentrygVisor bot
- Added fsbridge package with interface that can be used to open and read from VFS1 and VFS2 files. - Converted ELF loader to use fsbridge - Added VFS2 types to FSContext - Added vfs.MountNamespace to ThreadGroup Updates #1623 PiperOrigin-RevId: 295183950
2020-02-11Disallow duplicate NIC names.gVisor bot
PiperOrigin-RevId: 294500858
2020-02-10Clean-up comments in runsc/BUILD and CONTRIBUTING.md.Adin Scannell
PiperOrigin-RevId: 294300437
2020-02-10Add flag package to limit visibility.Adin Scannell
PiperOrigin-RevId: 294297004
2020-02-07Support listxattr and removexattr syscalls.Dean Deng
Note that these are only implemented for tmpfs, and other impls will still return EOPNOTSUPP. PiperOrigin-RevId: 293899385
2020-02-06Fix TestPauseResume in container test failed with connection refused.Ting-Yu Wang
Sometimes we get this error under TSAN: """ error getting process data from container: connecting to control server at PID XXXX: connection refused """ The theory is that the top "sleep 20" was too short for TSAN, and the container already exited, so we get connected refused. This commit changes the test to let container signaling it's running by touching a file repeatedly forever during the test. PiperOrigin-RevId: 293710957
2020-02-06runsc/container_test: hide host /etc in test containersAndrei Vagin
The host /etc can contain config files which affect tests. For example, bash reads /etc/passwd and if it is too big a test can fail by timeout. PiperOrigin-RevId: 293670637
2020-02-05Add notes to relevant tests.Adin Scannell
These were out-of-band notes that can help provide additional context and simplify automated imports. PiperOrigin-RevId: 293525915
2020-02-04Merge pull request #1683 from kevinGC:ipt-udp-matchersgVisor bot
PiperOrigin-RevId: 293243342
2020-02-04Increase container_test size.Kevin Krakauer
container_test was flaking because a small percentage of runs timed out. Tested this fix with --runs_per_test=100. PiperOrigin-RevId: 293240102
2020-02-04Allow mlock in fsgofer system call filtersFabricio Voznika
Go 1.14 has a workaround for a Linux 5.2-5.4 bug which requires mlock'ing the g stack to prevent register corruption. We need to allow this syscall until it is removed from Go. PiperOrigin-RevId: 293212935
2020-02-03Reduce run time for //test/syscalls:socket_inet_loopback_test_runsc_ptrace.Ting-Yu Wang
* Tests are picked for a shard differently. It now picks one test from each block, instead of picking the whole block. This makes the same kind of tests spreads across different shards. * Reduce the number of connect() calls in TCPListenClose. PiperOrigin-RevId: 293019281
2020-02-03Tag version_test as noguitar.Brad Burlage
PiperOrigin-RevId: 292974323
2020-02-03Allow mlock in system call filtersMichael Pratt
Go 1.14 has a workaround for a Linux 5.2-5.4 bug which requires mlock'ing the g stack to prevent register corruption. We need to allow this syscall until it is removed from Go. PiperOrigin-RevId: 292967478
2020-01-28Add vfs.FileDescription to FD tableFabricio Voznika
FD table now holds both VFS1 and VFS2 types and uses the correct one based on what's set. Parts of this CL are just initial changes (e.g. sys_read.go, runsc/main.go) to serve as a template for the remaining changes. Updates #1487 Updates #1623 PiperOrigin-RevId: 292023223
2020-01-27Cleanup glog and add real caller information.Adin Scannell
In general, we've learned that logging must be avoided at all costs in the hot path. It's unlikely that the optimizations here were significant in any case, since buffer would certainly escape. This also adds a test to ensure that the caller identification works as expected, and so that logging can be benchmarked. Original: BenchmarkGoogleLogging-6 1222255 949 ns/op With this change: BenchmarkGoogleLogging-6 517323 2346 ns/op Fixes #184 PiperOrigin-RevId: 291815420
2020-01-27Update package locations.Adin Scannell
Because the abi will depend on the core types for marshalling (usermem, context, safemem, safecopy), these need to be flattened from the sentry directory. These packages contain no sentry-specific details. PiperOrigin-RevId: 291811289
2020-01-27Fix licenses.Adin Scannell
The preferred Copyright holder is "The gVisor Authors". PiperOrigin-RevId: 291786657
2020-01-27Standardize on tools directory.Adin Scannell
PiperOrigin-RevId: 291745021
2020-01-16Plumb getting/setting xattrs through InodeOperations and 9p gofer interfaces.Dean Deng
There was a very bare get/setxattr in the InodeOperations interface. Add context.Context to both, size to getxattr, and flags to setxattr. Note that extended attributes are passed around as strings in this implementation, so size is automatically encoded into the value. Size is added in getxattr so that implementations can return ERANGE if a value is larger than can fit in the user-allocated buffer. This prevents us from unnecessarily passing around an arbitrarily large xattr when the user buffer is actually too small. Don't use the existing xattrwalk and xattrcreate messages and define our own, mainly for the sake of simplicity. Extended attributes will be implemented in future commits. PiperOrigin-RevId: 290121300
2020-01-15Bump SO_SNDBUF for fdbased endpoint used by runsc.Bhasker Hariharan
Updates #231 PiperOrigin-RevId: 289897881
2020-01-09New sync package.Ian Gudger
* Rename syncutil to sync. * Add aliases to sync types. * Replace existing usage of standard library sync package. This will make it easier to swap out synchronization primitives. For example, this will allow us to use primitives from github.com/sasha-s/go-deadlock to check for lock ordering violations. Updates #1472 PiperOrigin-RevId: 289033387
2020-01-08Combine various Create*NIC methods into CreateNICWithOptions.Bert Muthalaly
PiperOrigin-RevId: 288779416
2020-01-08Add NIC.isLoopback()Bert Muthalaly
...enabling us to remove the "CreateNamedLoopbackNIC" variant of CreateNIC and all the plumbing to connect it through to where the value is read in FindRoute. PiperOrigin-RevId: 288713093
2019-12-18Increase waitForProcessList timeoutFabricio Voznika
It can take more than 10 seconds when running under --race. PiperOrigin-RevId: 286296060
2019-12-17Leave minimum CPU number as a constantAleksandr Razumov
Remove introduced CPUNumMin config and hard-code it as 2.
2019-12-17Add minimum CPU number and only lower CPUs on --cpu-num-from-quotaAleksandr Razumov
* Add `--cpu-num-min` flag to control minimum CPUs * Only lower CPU count * Fix comments
2019-12-15Set CPU number to CPU quotaAleksandr Razumov
When application is not cgroups-aware, it can spawn excessive threads which often defaults to CPU number. Introduce a opt-in flag that will set CPU number accordingly to CPU quota (if available). Fixes #1391
2019-12-12Add iptables testing framework.Kevin Krakauer
It would be preferrable to test iptables via syscall tests, but there are some problems with that approach: * We're limited to loopback-only, as syscall tests involve only a single container. Other link interfaces (e.g. fdbased) should be tested. * We'd have to shell out to call iptables anyways, as the iptables syscall interface itself is too large and complex to work with alone. * Running the Linux/native version of the syscall test will require root, which is a pain to configure, is inherently unsafe, and could leave host iptables misconfigured. Using the go_test target allows there to be no new test runner. PiperOrigin-RevId: 285274275
2019-12-11Enable IPv6 in runscBhasker Hariharan
Fixes #1341 PiperOrigin-RevId: 285108973
2019-12-11runsc/debug: add an option to list all processesAndrei Vagin
runsc debug --ps list all processes with all threads. This option is added to the debug command but not to the ps command, because it is going to be used for debug purposes and we want to add any useful information without thinking about backward compatibility. This will help to investigate syzkaller issues. PiperOrigin-RevId: 285013668
2019-12-11Finish incomplete comment.Dean Deng
PiperOrigin-RevId: 285012278
2019-12-06Bump up Go 1.13 as minimum requirementFabricio Voznika
PiperOrigin-RevId: 284320186
2019-12-06Merge pull request #1233 from xiaobo55x:compatLoggVisor bot
PiperOrigin-RevId: 284305935
2019-12-06Add runtime tracing.Adin Scannell
This adds meaningful annotations to the trace generated by the runtime/trace package. PiperOrigin-RevId: 284290115
2019-12-06Implement TTY field in control.Processes().Nicolas Lacasse
Threadgroups already know their TTY (if they have one), which now contains the TTY Index, and is returned in the Processes() call. PiperOrigin-RevId: 284263850
2019-12-06Make annotations OCI compliantFabricio Voznika
Changed annotation to follow the standard defined here: https://github.com/opencontainers/image-spec/blob/master/annotations.md PiperOrigin-RevId: 284254847
2019-12-05Fix possible race condition destroying containerFabricio Voznika
When the sandbox is destroyed, making URPC calls to destroy the container will fail. The code was checking if the sandbox was running before attempting to make the URPC call, but that is racy. PiperOrigin-RevId: 284093764
2019-12-03Support IP_TOS and IPV6_TCLASS socket options for hostinet sockets.Dean Deng
There are two potential ways of sending a TOS byte with outgoing packets: including a control message in sendmsg, or setting the IP_TOS/IPV6_TCLASS socket options (for IPV4 and IPV6 respectively). This change lets hostinet support the latter. Fixes #1188 PiperOrigin-RevId: 283550925
2019-12-03Enable runsc compatLog support on arm64.Haibo Xu
Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I3fd5e552f5f03b5144ed52647f75af3b8253b1d6
2019-11-27Add support for receiving TOS and TCLASS control messages in hostinet.Dean Deng
This involves allowing getsockopt/setsockopt for the corresponding socket options, as well as allowing hostinet to process control messages received from the actual recvmsg syscall. PiperOrigin-RevId: 282851425
2019-11-26Merge pull request #981 from tanjianfeng:fix-898gVisor bot
PiperOrigin-RevId: 282669859
2019-11-25Use mount hints to determine FileAccessTypeFabricio Voznika
PiperOrigin-RevId: 282401165
2019-11-25Merge pull request #1176 from xiaobo55x:runsc_bootgVisor bot
PiperOrigin-RevId: 282382564
2019-11-23gofer: reduce CPU usage on GC as of frequent readdirJianfeng Tan
Refer to golang mallocgc(), each time of allocating an object > 32 KB, a gc will be triggered. When we do readdir, sentry always passes 65535, which leads to a malloc of 65535 * sizeof(p9.Direnta) > 32 KB. Considering we already use slice append, let's avoid defining the capability for this slide. Command for test: Before this change: (container)$ time tree linux-5.3.1 > /dev/null real 0m54.272s user 0m2.010s sys 0m1.740s (CPU usage of Gofer: ~30 cores) (host)$ perf top -p <pid-of-gofer> 42.57% runsc [.] runtime.gcDrain 23.41% runsc [.] runtime.(*lfstack).pop 9.74% runsc [.] runtime.greyobject 8.06% runsc [.] runtime.(*lfstack).push 4.33% runsc [.] runtime.scanobject 1.69% runsc [.] runtime.findObject 1.12% runsc [.] runtime.findrunnable 0.69% runsc [.] runtime.runqgrab ... (host)$ mkdir test && cd test (host)$ for i in `seq 1 65536`; do mkdir $i; done (container)$ time ls test/ > /dev/null real 2m10.934s user 0m0.280s sys 0m4.260s (CPU usage of Gofer: ~1 core) After this change: (container)$ time tree linux-5.3.1 > /dev/null real 0m22.465s user 0m1.270s sys 0m1.310s (CPU usage of Gofer: ~1 core) $ perf top -p <pid-of-gofer> 20.57% runsc [.] runtime.gcDrain 7.15% runsc [.] runtime.(*lfstack).pop 4.11% runsc [.] runtime.scanobject 3.78% runsc [.] runtime.greyobject 2.78% runsc [.] runtime.(*lfstack).push ... (host)$ mkdir test && cd test (host)$ for i in `seq 1 65536`; do mkdir $i; done (container)$ time ls test/ > /dev/null real 0m13.338s user 0m0.190s sys 0m3.980s (CPU usage of Gofer: ~0.8 core) Fixes #898 Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
2019-11-22Force timezone initialization before filter installationMichael Pratt
The first use of time.Local (usually via time.Time.Date, et. al) performs initialization of the local timezone, which involves open several tzdata files from the host. Since filter installation disallows open, we should explicitly force this initialization rather than implicitly depending on the first logging (or other time) call occurring before filter installation. PiperOrigin-RevId: 282053121
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 17:04:36 +0000