summaryrefslogtreecommitdiffhomepage
path: root/runsc
AgeCommit message (Collapse)Author
2020-01-15Merge release-20191213.0-118-gf874723 (automated)gVisor bot
2020-01-15Bump SO_SNDBUF for fdbased endpoint used by runsc.Bhasker Hariharan
Updates #231 PiperOrigin-RevId: 289897881
2020-01-10Merge release-20191213.0-96-g27500d5 (automated)gVisor bot
2020-01-09New sync package.Ian Gudger
* Rename syncutil to sync. * Add aliases to sync types. * Replace existing usage of standard library sync package. This will make it easier to swap out synchronization primitives. For example, this will allow us to use primitives from github.com/sasha-s/go-deadlock to check for lock ordering violations. Updates #1472 PiperOrigin-RevId: 289033387
2020-01-08Merge release-20191213.0-77-ge21c584 (automated)gVisor bot
2020-01-08Combine various Create*NIC methods into CreateNICWithOptions.Bert Muthalaly
PiperOrigin-RevId: 288779416
2020-01-08Merge release-20191213.0-70-g0cc1e74 (automated)gVisor bot
2020-01-08Add NIC.isLoopback()Bert Muthalaly
...enabling us to remove the "CreateNamedLoopbackNIC" variant of CreateNIC and all the plumbing to connect it through to where the value is read in FindRoute. PiperOrigin-RevId: 288713093
2019-12-18Increase waitForProcessList timeoutFabricio Voznika
It can take more than 10 seconds when running under --race. PiperOrigin-RevId: 286296060
2019-12-17Merge release-20191210.0-46-g725e73e (automated)gVisor bot
2019-12-17Leave minimum CPU number as a constantAleksandr Razumov
Remove introduced CPUNumMin config and hard-code it as 2.
2019-12-17Add minimum CPU number and only lower CPUs on --cpu-num-from-quotaAleksandr Razumov
* Add `--cpu-num-min` flag to control minimum CPUs * Only lower CPU count * Fix comments
2019-12-15Set CPU number to CPU quotaAleksandr Razumov
When application is not cgroups-aware, it can spawn excessive threads which often defaults to CPU number. Introduce a opt-in flag that will set CPU number accordingly to CPU quota (if available). Fixes #1391
2019-12-12Add iptables testing framework.Kevin Krakauer
It would be preferrable to test iptables via syscall tests, but there are some problems with that approach: * We're limited to loopback-only, as syscall tests involve only a single container. Other link interfaces (e.g. fdbased) should be tested. * We'd have to shell out to call iptables anyways, as the iptables syscall interface itself is too large and complex to work with alone. * Running the Linux/native version of the syscall test will require root, which is a pain to configure, is inherently unsafe, and could leave host iptables misconfigured. Using the go_test target allows there to be no new test runner. PiperOrigin-RevId: 285274275
2019-12-12Merge release-20191210.0-24-gb9aa62b (automated)gVisor bot
2019-12-11Enable IPv6 in runscBhasker Hariharan
Fixes #1341 PiperOrigin-RevId: 285108973
2019-12-11Merge release-20191129.0-45-gf8c5ad0 (automated)gVisor bot
2019-12-11runsc/debug: add an option to list all processesAndrei Vagin
runsc debug --ps list all processes with all threads. This option is added to the debug command but not to the ps command, because it is going to be used for debug purposes and we want to add any useful information without thinking about backward compatibility. This will help to investigate syzkaller issues. PiperOrigin-RevId: 285013668
2019-12-11Merge release-20191129.0-44-g1643224 (automated)gVisor bot
2019-12-11Finish incomplete comment.Dean Deng
PiperOrigin-RevId: 285012278
2019-12-07Merge release-20191129.0-23-g01eadf5 (automated)gVisor bot
2019-12-06Bump up Go 1.13 as minimum requirementFabricio Voznika
PiperOrigin-RevId: 284320186
2019-12-07Merge release-20191129.0-21-ge70636d (automated)gVisor bot
2019-12-06Merge pull request #1233 from xiaobo55x:compatLoggVisor bot
PiperOrigin-RevId: 284305935
2019-12-07Merge release-20191129.0-18-g371e210 (automated)gVisor bot
2019-12-06Add runtime tracing.Adin Scannell
This adds meaningful annotations to the trace generated by the runtime/trace package. PiperOrigin-RevId: 284290115
2019-12-06Implement TTY field in control.Processes().Nicolas Lacasse
Threadgroups already know their TTY (if they have one), which now contains the TTY Index, and is returned in the Processes() call. PiperOrigin-RevId: 284263850
2019-12-06Merge release-20191129.0-13-gea7a100 (automated)gVisor bot
2019-12-06Make annotations OCI compliantFabricio Voznika
Changed annotation to follow the standard defined here: https://github.com/opencontainers/image-spec/blob/master/annotations.md PiperOrigin-RevId: 284254847
2019-12-06Merge release-20191129.0-8-g40035d7 (automated)gVisor bot
2019-12-05Fix possible race condition destroying containerFabricio Voznika
When the sandbox is destroyed, making URPC calls to destroy the container will fail. The code was checking if the sandbox was running before attempting to make the URPC call, but that is racy. PiperOrigin-RevId: 284093764
2019-12-03Merge release-20191114.0-49-g19b2d99 (automated)gVisor bot
2019-12-03Support IP_TOS and IPV6_TCLASS socket options for hostinet sockets.Dean Deng
There are two potential ways of sending a TOS byte with outgoing packets: including a control message in sendmsg, or setting the IP_TOS/IPV6_TCLASS socket options (for IPV4 and IPV6 respectively). This change lets hostinet support the latter. Fixes #1188 PiperOrigin-RevId: 283550925
2019-12-03Enable runsc compatLog support on arm64.Haibo Xu
Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I3fd5e552f5f03b5144ed52647f75af3b8253b1d6
2019-11-28Merge release-20191114.0-41-g684f757 (automated)gVisor bot
2019-11-27Add support for receiving TOS and TCLASS control messages in hostinet.Dean Deng
This involves allowing getsockopt/setsockopt for the corresponding socket options, as well as allowing hostinet to process control messages received from the actual recvmsg syscall. PiperOrigin-RevId: 282851425
2019-11-27Merge release-20191114.0-38-g4a620c4 (automated)gVisor bot
2019-11-26Merge pull request #981 from tanjianfeng:fix-898gVisor bot
PiperOrigin-RevId: 282669859
2019-11-25Merge release-20191114.0-32-g97d2c9a (automated)gVisor bot
2019-11-25Use mount hints to determine FileAccessTypeFabricio Voznika
PiperOrigin-RevId: 282401165
2019-11-25Merge release-20191114.0-30-g0416c24 (automated)gVisor bot
2019-11-25Merge pull request #1176 from xiaobo55x:runsc_bootgVisor bot
PiperOrigin-RevId: 282382564
2019-11-23gofer: reduce CPU usage on GC as of frequent readdirJianfeng Tan
Refer to golang mallocgc(), each time of allocating an object > 32 KB, a gc will be triggered. When we do readdir, sentry always passes 65535, which leads to a malloc of 65535 * sizeof(p9.Direnta) > 32 KB. Considering we already use slice append, let's avoid defining the capability for this slide. Command for test: Before this change: (container)$ time tree linux-5.3.1 > /dev/null real 0m54.272s user 0m2.010s sys 0m1.740s (CPU usage of Gofer: ~30 cores) (host)$ perf top -p <pid-of-gofer> 42.57% runsc [.] runtime.gcDrain 23.41% runsc [.] runtime.(*lfstack).pop 9.74% runsc [.] runtime.greyobject 8.06% runsc [.] runtime.(*lfstack).push 4.33% runsc [.] runtime.scanobject 1.69% runsc [.] runtime.findObject 1.12% runsc [.] runtime.findrunnable 0.69% runsc [.] runtime.runqgrab ... (host)$ mkdir test && cd test (host)$ for i in `seq 1 65536`; do mkdir $i; done (container)$ time ls test/ > /dev/null real 2m10.934s user 0m0.280s sys 0m4.260s (CPU usage of Gofer: ~1 core) After this change: (container)$ time tree linux-5.3.1 > /dev/null real 0m22.465s user 0m1.270s sys 0m1.310s (CPU usage of Gofer: ~1 core) $ perf top -p <pid-of-gofer> 20.57% runsc [.] runtime.gcDrain 7.15% runsc [.] runtime.(*lfstack).pop 4.11% runsc [.] runtime.scanobject 3.78% runsc [.] runtime.greyobject 2.78% runsc [.] runtime.(*lfstack).push ... (host)$ mkdir test && cd test (host)$ for i in `seq 1 65536`; do mkdir $i; done (container)$ time ls test/ > /dev/null real 0m13.338s user 0m0.190s sys 0m3.980s (CPU usage of Gofer: ~0.8 core) Fixes #898 Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
2019-11-22Merge release-20191114.0-24-g5eb5221 (automated)gVisor bot
2019-11-22Force timezone initialization before filter installationMichael Pratt
The first use of time.Local (usually via time.Time.Date, et. al) performs initialization of the local timezone, which involves open several tzdata files from the host. Since filter installation disallows open, we should explicitly force this initialization rather than implicitly depending on the first logging (or other time) call occurring before filter installation. PiperOrigin-RevId: 282053121
2019-11-13Enable runsc/boot support on arm64.Haibo Xu
This patch also include a minor change to replace syscall.Dup2 with syscall.Dup3 which was missed in a previous commit(ref a25a976). Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I00beb9cc492e44c762ebaa3750201c63c1f7c2f3
2019-11-07Merge release-20190806.1-377-gf8ffadd (automated)gVisor bot
2019-11-06Add p9.OpenTruncate.Jamie Liu
This is required to implement O_TRUNC correctly on filesystems backed by gofers. 9P2000.L: "lopen prepares fid for file I/O. flags contains Linux open(2) flags bits, e.g. O_RDONLY, O_RDWR, O_WRONLY." open(2): "The argument flags must include one of the following access modes: O_RDONLY, O_WRONLY, or O_RDWR. ... In addition, zero or more file creation flags and file status flags can be bitwise-or'd in flags." The reference 9P2000.L implementation also appears to expect arbitrary flags, not just access modes, in Tlopen.flags: https://github.com/chaos/diod/blob/master/diod/ops.c#L703 PiperOrigin-RevId: 278972683
2019-11-05Fix repository build scripts.Adin Scannell
This fixes a number of issues with the repository build process: * Fix the overall structure of the repository. * Fix the debian package description. * Fix the broken version number for packages. * Update the digest algorithm used for signing the release. I've validated that installation works from a separate staging bucket. Updates #852 PiperOrigin-RevId: 278716914
2019-11-04Merge release-20190806.1-367-gb23b36e (automated)gVisor bot
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 10:49:34 +0000