summaryrefslogtreecommitdiffhomepage
path: root/runsc
AgeCommit message (Collapse)Author
2019-08-13Fix file mode check in fsgofer AttachFabricio Voznika
PiperOrigin-RevId: 263189654
2019-08-13tests: print stack traces if test failed by timeoutAndrei Vagin
PiperOrigin-RevId: 263184083
2019-08-08netstack: Don't start endpoint goroutines too soon on restore.Rahat Mahmood
Endpoint protocol goroutines were previously started as part of loading the endpoint. This is potentially too soon, as resources used by these goroutine may not have been loaded. Protocol goroutines may perform meaningful work as soon as they're started (ex: incoming connect) which can cause them to indirectly access resources that haven't been loaded yet. This CL defers resuming all protocol goroutines until the end of restore. PiperOrigin-RevId: 262409429
2019-08-07Set gofer's OOM score adjustmentFabricio Voznika
Updates #512 PiperOrigin-RevId: 262195448
2019-08-06Make loading container in a sandbox more robustFabricio Voznika
PiperOrigin-RevId: 262071646
2019-08-02Remove stale TODOFabricio Voznika
This was done in commit 04cbb13ce9b151cf906f42e3f18ce3a875f01f63 PiperOrigin-RevId: 261414748
2019-08-02Plumbing for iptables sockopts.Kevin Krakauer
PiperOrigin-RevId: 261413396
2019-08-02Stops container if gofer is killedFabricio Voznika
Each gofer now has a goroutine that polls on the FDs used to communicate with the sandbox. The respective gofer is destroyed if any of the FDs is closed. Closes #601 PiperOrigin-RevId: 261383725
2019-08-02Remove kernel.mounts.Nicolas Lacasse
We can get the mount namespace from the CreateProcessArgs in all cases where we need it. This also gets rid of kernel.Destroy method, since the only thing it was doing was DecRefing the mounts. Removing the need to call kernel.SetRootMountNamespace also allowed for some more simplifications in the container fs setup code. PiperOrigin-RevId: 261357060
2019-08-01Set sandbox oom_score_adjIan Lewis
Set /proc/self/oom_score_adj based on oomScoreAdj specified in the OCI bundle. When new containers are added to the sandbox oom_score_adj for the sandbox and all other gofers are adjusted so that oom_score_adj is equal to the lowest oom_score_adj of all containers in the sandbox. Fixes #512 PiperOrigin-RevId: 261242725
2019-07-30Remove unused const variablesIan Lewis
PiperOrigin-RevId: 260824989
2019-07-30Change syscall.POLL to syscall.PPOLL.Haibo Xu
syscall.POLL is not supported on arm64, using syscall.PPOLL to support both the x86 and arm64. refs #63 Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I2c81a063d3ec4e7e6b38fe62f17a0924977f505e COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/543 from xiaobo55x:master ba598263fd3748d1addd48e4194080aa12085164 PiperOrigin-RevId: 260752049
2019-07-29Move runtimes tests to appropriate directory.Samantha Sample
PiperOrigin-RevId: 260577765
2019-07-26runsc: propagate the alsologtostderr to sub-commandsAndrei Vagin
PiperOrigin-RevId: 260239119
2019-07-26Merge pull request #452 from zhangningdlut:chris_test_pidnsgVisor bot
PiperOrigin-RevId: 260220279
2019-07-26Publish Dockerfiles and test-runner binaries for running language tests.Samantha Sample
By following the directions in the README file, these Dockerfiles can be built and used to run native language tests for their respective runtimes. PiperOrigin-RevId: 260174430
2019-07-25Automated rollback of changelist 255679453Fabricio Voznika
PiperOrigin-RevId: 260047477
2019-07-24Use different pidns among different containerschris.zn
The different containers in a sandbox used only one pid namespace before. This results in that a container can see the processes in another container in the same sandbox. This patch use different pid namespace for different containers. Signed-off-by: chris.zn <chris.zn@antfin.com>
2019-07-23Give each container a distinct MountNamespace.Nicolas Lacasse
This keeps all container filesystem completely separate from eachother (including from the root container filesystem), and allows us to get rid of the "__runsc_containers__" directory. It also simplifies container startup/teardown as we don't have to muck around in the root container's filesystem. PiperOrigin-RevId: 259613346
2019-07-23Make runAllTests() consistent with listTests().Brett Landau
This change has the listTests() function return a string slice of all the tests. Originally, I planned not to modify the listTests() function and instead capture the output of it and then iterate through the captured output. I decided against this approach as most of the test binaries already produce a slice as they collect tests through filepath.Walk(). Now I use this slice and return it so that I can iterate through in runAllTests() and also when printing out the tests. PiperOrigin-RevId: 259599782
2019-07-22Prototype integration of runtime language tests for Node.js into gVisor.Samantha Sample
This is the first version of a testing program to be used by gVisor for including language testing into their presubmits. It works when ran in the same manor the image and integration tests are ran in as described in their README file. PiperOrigin-RevId: 259392416
2019-07-19Create the initial binary for each of the 5 runtime's test-runner.Brett Landau
Repeated code is planned to be factored out to improve clarity and readability. PiperOrigin-RevId: 259059978
2019-07-16test/integration: wait a background processAndrei Vagin
Otherwise this process can be killed before it prints the test message. PiperOrigin-RevId: 258448204
2019-07-12Take a reference on the already-mounted inode before re-mounting it.Nicolas Lacasse
PiperOrigin-RevId: 257855777
2019-07-08Merge pull request #375 from jmgao:mastergVisor bot
PiperOrigin-RevId: 257041876
2019-07-08Don't try to execute a file that is not regular.Nicolas Lacasse
PiperOrigin-RevId: 257037608
2019-07-03Avoid importing platforms from many source filesAndrei Vagin
PiperOrigin-RevId: 256494243
2019-07-02Remove map from fd_map, change to fd_table.Adin Scannell
This renames FDMap to FDTable and drops the kernel.FD type, which had an entire package to itself and didn't serve much use (it was freely cast between types, and served as more of an annoyance than providing any protection.) Based on BenchmarkFDLookupAndDecRef-12, we can expect 5-10 ns per lookup operation, and 10-15 ns per concurrent lookup operation of savings. This also fixes two tangential usage issues with the FDMap. Namely, non-atomic use of NewFDFrom and associated calls to Remove (that are both racy and fail to drop the reference on the underlying file.) PiperOrigin-RevId: 256285890
2019-07-01Use new location of python-hello image in tests.Nicolas Lacasse
PiperOrigin-RevId: 256062988
2019-06-28Add finalizer on AtomicRefCount to check for leaks.Ian Gudger
PiperOrigin-RevId: 255711454
2019-06-28Automated rollback of changelist 255263686Nicolas Lacasse
PiperOrigin-RevId: 255679453
2019-06-28runsc: allow openat for runsc-raceAndrei Vagin
I see that runsc-race is killed by SIGSYS, because openat isn't allowed by seccomp filters: 60052 openat(AT_FDCWD, "/proc/sys/vm/overcommit_memory", O_RDONLY|O_CLOEXEC <unfinished ...> 60052 <... openat resumed> ) = 257 60052 --- SIGSYS {si_signo=SIGSYS, si_code=SYS_SECCOMP, si_call_addr=0xfaacf1, si_syscall=__NR_openat, si_arch=AUDIT_ARCH_X86_64} --- PiperOrigin-RevId: 255640808
2019-06-27Fix various spelling issues in the documentationMichael Pratt
Addresses obvious typos, in the documentation only. COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/443 from Pixep:fix/documentation-spelling 4d0688164eafaf0b3010e5f4824b35d1e7176d65 PiperOrigin-RevId: 255477779
2019-06-27Cache directory entries in the overlayMichael Pratt
Currently, the overlay dirCache is only used for a single logical use of getdents. i.e., it is discard when the FD is closed or seeked back to the beginning. But the initial work of getting the directory contents can be quite expensive (particularly sorting large directories), so we should keep it as long as possible. This is very similar to the readdirCache in fs/gofer. Since the upper filesystem does not have to allow caching readdir entries, the new CacheReaddir MountSourceOperations method controls this behavior. This caching should be trivially movable to all Inodes if desired, though that adds an additional copy step for non-overlay Inodes. (Overlay Inodes already do the extra copy). PiperOrigin-RevId: 255477592
2019-06-26Preserve permissions when checking lowerFabricio Voznika
The code was wrongly assuming that only read access was required from the lower overlay when checking for permissions. This allowed non-writable files to be writable in the overlay. Fixes #316 PiperOrigin-RevId: 255263686
2019-06-26Always set SysProcAttr.Ctty to an FD in the child's FD table.Nicolas Lacasse
Go was going to change the behavior of SysProcAttr.Ctty such that it must be an FD in the *parent* FD table: https://go-review.googlesource.com/c/go/+/178919/ However, after some debate, it was decided that this change was too backwards-incompatible, and so it was reverted. https://github.com/golang/go/issues/29458 The behavior going forward is unchanged: the Ctty FD must be an FD in the *child* FD table. PiperOrigin-RevId: 255228476
2019-06-25Use different Ctty FDs based on the go version.Nicolas Lacasse
An upcoming change in Go 1.13 [1] changes the semantics of the SysProcAttr.Ctty field. Prior to the change, the FD must be an FD in the child process's FD table (aka "post-shuffle"). After the change, the FD must be an FD in the current process's FD table (aka "pre-shuffle"). To be compatible with both versions this CL introduces a new boolean "CttyFdIsPostShuffle" which indicates whether a pre- or post-shuffle FD should be provided. We use build tags to chose the correct one. 1: https://go-review.googlesource.com/c/go/+/178919/ PiperOrigin-RevId: 255015303
2019-06-24fsgopher: reopen files via /proc/self/fdAndrei Vagin
When we reopen file by path, we can't be sure that we will open exactly the same file. The file can be deleted and another one with the same name can be created. PiperOrigin-RevId: 254898594
2019-06-24Allow to change logging options using 'runsc debug'Fabricio Voznika
New options are: runsc debug --strace=off|all|function1,function2 runsc debug --log-level=warning|info|debug runsc debug --log-packets=true|false Updates #407 PiperOrigin-RevId: 254843128
2019-06-21Delete dangling comment line.Nicolas Lacasse
This was from an old comment, which was superseded by the existing comment which is correct. PiperOrigin-RevId: 254434535
2019-06-20Drop extra characterMichael Pratt
PiperOrigin-RevId: 254237530
2019-06-18Kill sandbox process when 'runsc do' exitsFabricio Voznika
PiperOrigin-RevId: 253882115
2019-06-18Add Container/Sandbox args struct for creationFabricio Voznika
There were 3 string arguments that could be easily misplaced and it makes it easier to add new arguments, especially for Container that has dozens of callers. PiperOrigin-RevId: 253872074
2019-06-18gvisor/kokoro: don't modify tests names in the BUILD fileAndrei Vagin
PiperOrigin-RevId: 253746380
2019-06-17gvisor/bazel: use python2 to build runsc-debianAndrei Vagin
$ bazel build runsc:runsc-debian File ".../bazel_tools/tools/build_defs/pkg/make_deb.py", line 311, in GetFlagValue: flagvalue = flagvalue.decode('utf-8') AttributeError: 'str' object has no attribute 'decode' make_deb.py is incompatible with Python3. https://github.com/bazelbuild/bazel/issues/8443 PiperOrigin-RevId: 253691923
2019-06-14Enable Receive Buffer Auto-Tuning for runsc.Bhasker Hariharan
Updates #230 PiperOrigin-RevId: 253225078
2019-06-13Plumb context through more layers of filesytem.Ian Gudger
All functions which allocate objects containing AtomicRefCounts will soon need a context. PiperOrigin-RevId: 253147709
2019-06-13Update canonical repository.Adin Scannell
This can be merged after: https://github.com/google/gvisor-website/pull/77 or https://github.com/google/gvisor-website/pull/78 PiperOrigin-RevId: 253132620
2019-06-13Set the HOME environment variable (fixes #293)Ian Lewis
runsc will now set the HOME environment variable as required by POSIX. The user's home directory is retrieved from the /etc/passwd file located on the container's file system during boot. PiperOrigin-RevId: 253120627
2019-06-13Fix use of "2 ^ 30".Josh Gao
2 ^ 30 is 28, not 1073741824.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 09:19:22 +0000