summaryrefslogtreecommitdiffhomepage
path: root/runsc/test
AgeCommit message (Collapse)Author
2019-06-06Copy up parent when binding UDS on overlayfsFabricio Voznika
Overlayfs was expecting the parent to exist when bind(2) was called, which may not be the case. The fix is to copy the parent directory to the upper layer before binding the UDS. There is not good place to add tests for it. Syscall tests would be ideal, but it's hard to guarantee that the directory where the socket is created hasn't been touched before (and thus copied the parent to the upper layer). Added it to runsc integration tests for now. If it turns out we have lots of these kind of tests, we can consider moving them somewhere more appropriate. PiperOrigin-RevId: 251954156
2019-06-06Send error message to docker/kubectl exec on failureFabricio Voznika
Containerd uses the last error message sent to the log to print as failure cause for create/exec. This required a few changes in the logging logic for runsc: - cmd.Errorf/Fatalf: now writes a message with 'error' level to containerd log, in addition to stderr and debug logs, like before. - log.Infof/Warningf/Fatalf: are not sent to containerd log anymore. They are mostly used for debugging and not useful to containerd. In most cases, --debug-log is enabled and this avoids the logs messages from being duplicated. - stderr is not used as default log destination anymore. Some commands assume stdio is for the container/process running inside the sandbox and it's better to never use it for logging. By default, logs are supressed now. PiperOrigin-RevId: 251881815
2019-06-06Add multi-fd support to fdbased endpoint.Bhasker Hariharan
This allows an fdbased endpoint to have multiple underlying fd's from which packets can be read and dispatched/written to. This should allow for higher throughput as well as better scalability of the network stack as number of connections increases. Updates #231 PiperOrigin-RevId: 251852825
2019-05-14kokoro: run tests with a default docker container runtimeAndrei Vagin
We want to know that our environment set up properly and docker tests pass with a native runtime. PiperOrigin-RevId: 248229294 Change-Id: I06c221e5eeed6e01bdd1aa935333c57e8eadc498
2019-05-13gvisor/runsc/tests: set timeout for http.Get()Andrei Vagin
WaitForHTTP tries GET requests on a port until the call succeeds or timeout. But we want to be sure that one of our attempts will not stuck for the whole timeout. All timeouts are increased to 30 seconds, because test cases with smaller timeouts fail sometimes even for the native container runtime (runc). PiperOrigin-RevId: 247888467 Change-Id: I03cfd3275286bc686a78fd26da43231d20667851
2019-05-03Fix runsc restore to be compatible with docker start --checkpoint ...Andrei Vagin
Change-Id: I02b30de13f1393df66edf8829fedbf32405d18f8 PiperOrigin-RevId: 246621192
2019-05-03gvisor/kokoro: save runsc logsAndrei Vagin
PiperOrigin-RevId: 246542315 Change-Id: Ia9ba2bc104e0af3277d3b6102122c13d320ea802
2019-05-03Increase timeout to wait for port to become availableFabricio Voznika
TestHttpd fails sporadically waiting for the port on slow machines. PiperOrigin-RevId: 246525277 Change-Id: Ie0ea71e3c4664d24f580eabd8f7461e47079f734
2019-04-29Change copyright notice to "The gVisor Authors"Michael Pratt
Based on the guidelines at https://opensource.google.com/docs/releasing/authors/. 1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./' 2. Manual fixup of "Google Inc" references. 3. Add AUTHORS file. Authors may request to be added to this file. 4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS. Fixes #209 PiperOrigin-RevId: 245823212 Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
2019-04-26Make raw sockets a toggleable feature disabled by default.Kevin Krakauer
PiperOrigin-RevId: 245511019 Change-Id: Ia9562a301b46458988a6a1f0bbd5f07cbfcb0615
2019-03-19netstack: reduce MSS from SYN to account tcp optionsAndrei Vagin
See: https://tools.ietf.org/html/rfc6691#section-2 PiperOrigin-RevId: 239305632 Change-Id: Ie8eb912a43332e6490045dc95570709c5b81855e
2019-02-25Fix cgroup when path is relativeFabricio Voznika
This can happen when 'docker run --cgroup-parent=' flag is set. PiperOrigin-RevId: 235645559 Change-Id: Ieea3ae66939abadab621053551bf7d62d412e7ee
2019-01-31gvisor/gofer: Use pivot_root instead of chrootAndrei Vagin
PiperOrigin-RevId: 231864273 Change-Id: I8545b72b615f5c2945df374b801b80be64ec3e13
2019-01-31Remove license commentsMichael Pratt
Nothing reads them and they can simply get stale. Generated with: $ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD PiperOrigin-RevId: 231818945 Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0
2019-01-22Don't bind-mount runsc into a sandbox mntnsAndrei Vagin
PiperOrigin-RevId: 230437407 Change-Id: Id9d8ceeb018aad2fe317407c78c6ee0f4b47aa2b
2019-01-16Prevent internal tmpfs mount to override files in /tmpFabricio Voznika
Runsc wants to mount /tmp using internal tmpfs implementation for performance. However, it risks hiding files that may exist under /tmp in case it's present in the container. Now, it only mounts over /tmp iff: - /tmp was not explicitly asked to be mounted - /tmp is empty If any of this is not true, then /tmp maps to the container's image /tmp. Note: checkpoint doesn't have sentry FS mounted to check if /tmp is empty. It simply looks for explicit mounts right now. PiperOrigin-RevId: 229607856 Change-Id: I10b6dae7ac157ef578efc4dfceb089f3b94cde06
2019-01-14runsc: set up a minimal chroot from the sandbox processAndrei Vagin
In this case, new mounts are not created in the host mount namspaces, so tearDownChroot isn't needed, because chroot will be destroyed with a sandbox mount namespace. In additional, pivot_root can't be called instead of chroot. PiperOrigin-RevId: 229250871 Change-Id: I765bdb587d0b8287a6a8efda8747639d37c7e7b6
2018-12-28Simplify synchronization between runsc and sandbox processFabricio Voznika
Make 'runsc create' join cgroup before creating sandbox process. This removes the need to synchronize platform creation and ensure that sandbox process is charged to the right cgroup from the start. PiperOrigin-RevId: 227166451 Change-Id: Ieb4b18e6ca0daf7b331dc897699ca419bc5ee3a2
2018-12-17Expose internal testing flagMichael Pratt
Never to used outside of runsc tests! PiperOrigin-RevId: 225919013 Change-Id: Ib3b14aa2a2564b5246fb3f8933d95e01027ed186
2018-12-10Open source system call tests.Brian Geffon
PiperOrigin-RevId: 224886231 Change-Id: I0fccb4d994601739d8b16b1d4e6b31f40297fb22
2018-12-10Internal change.Nicolas Lacasse
PiperOrigin-RevId: 224865061 Change-Id: I6aa31f880931980ad2fc4c4b3cc4c532aacb31f4
2018-11-28Fix crictl tests.Kevin Krakauer
gvisor-containerd-shim moved. It now has a stable URL that run_tests.sh always uses. PiperOrigin-RevId: 223188822 Change-Id: I5687c78289404da27becd8d5949371e580fdb360
2018-11-27Disable crictl testsMichael Pratt
gvisor-containerd-shim installation is currently broken. PiperOrigin-RevId: 223002877 Change-Id: I2b890c5bf602a96c475c3805f24852ead8593a35
2018-11-20Use math.Rand to generate a random test container id.Nicolas Lacasse
We were relying on time.UnixNano, but that was causing collisions. Now we generate 20 bytes of entropy from rand.Read, and base32-encode it to get a valid container id. PiperOrigin-RevId: 222313867 Change-Id: Iaeea9b9582d36de55f9f02f55de6a5de3f739371
2018-11-20Internal change.Nicolas Lacasse
PiperOrigin-RevId: 222170431 Change-Id: I26a6d6ad5d6910a94bb8b0a05fc2d12e23098399
2018-11-20Internal change.Nicolas Lacasse
PiperOrigin-RevId: 221848471 Change-Id: I882fbe5ce7737048b2e1f668848e9c14ed355665
2018-11-15Allow sandbox.Wait to be called after the sandbox has exited.Nicolas Lacasse
sandbox.Wait is racey, as the sandbox may have exited before it is called, or even during. We already had code to handle the case that the sandbox exits during the Wait call, but we were not properly handling the case where the sandbox has exited before the call. The best we can do in such cases is return the sandbox exit code as the application exit code. PiperOrigin-RevId: 221702517 Change-Id: I290d0333cc094c7c1c3b4ce0f17f61a3e908d787
2018-11-13Internal change.Nicolas Lacasse
PiperOrigin-RevId: 221343421 Change-Id: I418b5204c5ed4fe1e0af25ef36ee66b9b571928e
2018-11-13Internal change.Nicolas Lacasse
PiperOrigin-RevId: 221299066 Change-Id: I8ae352458f9976c329c6946b1efa843a3de0eaa4
2018-11-12Internal change.Nicolas Lacasse
PiperOrigin-RevId: 221178413 Change-Id: I0e615c5e945cb924d8df767c894a9e402f0b8ff2
2018-11-07Add test that volume can be mounted on top of a symlinkFabricio Voznika
PiperOrigin-RevId: 220588094 Change-Id: I18915e892ceac86eac1f89ebcadffb4fdf8d0cf6
2018-11-07Fix test --race violationFabricio Voznika
SetupContainerInRoot was setting Config.RootDir unnecessarily and causing a --race violation in TestMultiContainerDestroyStarting. PiperOrigin-RevId: 220580073 Change-Id: Ie0b28c19846106c7458a92681b708ae70f87d25a
2018-11-06Fix problem where crictl tests would signal both error and done channelsKevin Krakauer
PiperOrigin-RevId: 220372291 Change-Id: I054ba56a23c402c7244b476d7d6fe72084942a0e
2018-11-01First crictl integration tests.Kevin Krakauer
More tests will come, but it's worth getting what's done so far reviewed. PiperOrigin-RevId: 219734531 Change-Id: If15ca6e6855e3d1cc28c83b5f9c3a72cb65b2e59
2018-11-01Close http.Response.Body after Get request.Kevin Krakauer
From https://golang.org/pkg/net/http/#Get: "When err is nil, resp always contains a non-nil resp.Body. Caller should close resp.Body when done reading from it." PiperOrigin-RevId: 219658052 Change-Id: I556e88ac4f2c90cd36ab16cd3163d1a52afc32b7
2018-10-24Re-enable TestPythonHello now that ptrace seccomp issue is resolved.Nicolas Lacasse
PiperOrigin-RevId: 218636184 Change-Id: I44deac3f32276d06955c5fb1e28c5970bb08f5fd
2018-10-23Track paths and provide a rename hook.Adin Scannell
This change also adds extensive testing to the p9 package via mocks. The sanity checks and type checks are moved from the gofer into the core package, where they can be more easily validated. PiperOrigin-RevId: 218296768 Change-Id: I4fc3c326e7bf1e0e140a454cbacbcc6fd617ab55
2018-10-19Use correct company name in copyright headerIan Gudger
PiperOrigin-RevId: 217951017 Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
2018-10-18Resolve mount paths while setting up root fs mountFabricio Voznika
It's hard to resolve symlinks inside the sandbox because rootfs and mounts may be read-only, forcing us to create mount points inside lower layer of an overlay, **before** the volumes are mounted. Since the destination must already be resolved outside the sandbox when creating mounts, take this opportunity to rewrite the spec with paths resolved. "runsc boot" will use the "resolved" spec to load mounts. In addition, symlink traversals were disabled while mounting containers inside the sandbox. It haven't been able to write a good test for it. So I'm relying on manual tests for now. PiperOrigin-RevId: 217749904 Change-Id: I7ac434d5befd230db1488446cda03300cc0751a9
2018-10-18Skip TestPythonHello on ptrace platform while we debug the issue.Nicolas Lacasse
PiperOrigin-RevId: 217743078 Change-Id: I47fabd88139b968b6183bcc0340065fdbbc1d40d
2018-10-17runsc: Support job control signals for the root container.Nicolas Lacasse
Now containers run with "docker run -it" support control characters like ^C and ^Z. This required refactoring our signal handling a bit. Signals delivered to the "runsc boot" process are turned into loader.Signal calls with the appropriate delivery mode. Previously they were always sent directly to PID 1. PiperOrigin-RevId: 217566770 Change-Id: I5b7220d9a0f2b591a56335479454a200c6de8732
2018-10-17Attempt to deflake TestPythonHelloFabricio Voznika
It has timed out running with kokoro a few times. I passes consistently on my machine (200+ runsc). Increase the timeout to see if it helps. Failure: image_test.go:212: WaitForHTTP() timeout: Get http://localhost:32785/: dial tcp [::1]:32785: connect: connection refused PiperOrigin-RevId: 217532428 Change-Id: Ibf860aecf537830bef832e436f2e804b3fc12f2d
2018-10-17Bump Pause/Resume integration test timeout in attempt to deflake Kokoro.Nicolas Lacasse
This is one of the many tests that fails periodically, making Kokoro unstable. PiperOrigin-RevId: 217528257 Change-Id: I2508ecf4d74d71b91feff1183544d61d7bd16995
2018-10-11Make debug log file name configurableFabricio Voznika
This is a breaking change if you're using --debug-log-dir. The fix is to replace it with --debug-log and add a '/' at the end: --debug-log-dir=/tmp/runsc ==> --debug-log=/tmp/runsc/ PiperOrigin-RevId: 216761212 Change-Id: I244270a0a522298c48115719fa08dad55e34ade1
2018-10-11Sandbox cgroup testsFabricio Voznika
Verify that cgroup is being properly set. PiperOrigin-RevId: 216736137 Change-Id: I0e27fd604eca67e7dd2e3548dc372ca9cc416309
2018-10-10Add sandbox to cgroupFabricio Voznika
Sandbox creation uses the limits and reservations configured in the OCI spec and set cgroup options accordinly. Then it puts both the sandbox and gofer processes inside the cgroup. It also allows the cgroup to be pre-configured by the caller. If the cgroup already exists, sandbox and gofer processes will join the cgroup but it will not modify the cgroup with spec limits. PiperOrigin-RevId: 216538209 Change-Id: If2c65ffedf55820baab743a0edcfb091b89c1019
2018-10-09Add tests to verify gofer is chroot'edFabricio Voznika
PiperOrigin-RevId: 216472439 Change-Id: Ic4cb86c8e0a9cb022d3ceed9dc5615266c307cf9
2018-10-08Job control signals must be sent to all processes in the FG process group.Nicolas Lacasse
We were previously only sending to the originator of the process group. Integration test was changed to test this behavior. It fails without the corresponding code change. PiperOrigin-RevId: 216297263 Change-Id: I7e41cfd6bdd067f4b9dc215e28f555fb5088916f
2018-10-04Capture boot panics in debug log.Nicolas Lacasse
Docker and Containerd both eat the boot processes stderr, making it difficult to track down panics (which are always written to stderr). This CL makes the boot process dup its debug log FD to stderr, so that panics will be captured in the debug log, which is better than nothing. This is the 3rd try at this CL. Previous attempts were foiled because Docker expects the 'create' command to pass its stdio directly to the container, so duping stderr in 'create' caused the applications stderr to go to the log file, which breaks many applications (including our mysql test). I added a new image_test that makes sure stdout and stderr are handled correctly. PiperOrigin-RevId: 215767328 Change-Id: Icebac5a5dcf39b623b79d7a0e2f968e059130059
2018-10-03Fix sandbox chrootFabricio Voznika
Sandbox was setting chroot, but was not chaging the working dir. Added test to ensure this doesn't happen in the future. PiperOrigin-RevId: 215676270 Change-Id: I14352d3de64a4dcb90e50948119dc8328c9c15e1
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 03:07:22 +0000