summaryrefslogtreecommitdiffhomepage
path: root/runsc/specutils
AgeCommit message (Collapse)Author
2018-12-10Open source system call tests.Brian Geffon
PiperOrigin-RevId: 224886231 Change-Id: I0fccb4d994601739d8b16b1d4e6b31f40297fb22
2018-11-20Internal change.Nicolas Lacasse
PiperOrigin-RevId: 221848471 Change-Id: I882fbe5ce7737048b2e1f668848e9c14ed355665
2018-11-14Internal change.Nicolas Lacasse
PiperOrigin-RevId: 221462069 Change-Id: Id469ed21fe12e582c78340189b932989afa13c67
2018-11-13Internal change.Nicolas Lacasse
PiperOrigin-RevId: 221343421 Change-Id: I418b5204c5ed4fe1e0af25ef36ee66b9b571928e
2018-10-23Track paths and provide a rename hook.Adin Scannell
This change also adds extensive testing to the p9 package via mocks. The sanity checks and type checks are moved from the gofer into the core package, where they can be more easily validated. PiperOrigin-RevId: 218296768 Change-Id: I4fc3c326e7bf1e0e140a454cbacbcc6fd617ab55
2018-10-19Use correct company name in copyright headerIan Gudger
PiperOrigin-RevId: 217951017 Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
2018-10-18Resolve mount paths while setting up root fs mountFabricio Voznika
It's hard to resolve symlinks inside the sandbox because rootfs and mounts may be read-only, forcing us to create mount points inside lower layer of an overlay, **before** the volumes are mounted. Since the destination must already be resolved outside the sandbox when creating mounts, take this opportunity to rewrite the spec with paths resolved. "runsc boot" will use the "resolved" spec to load mounts. In addition, symlink traversals were disabled while mounting containers inside the sandbox. It haven't been able to write a good test for it. So I'm relying on manual tests for now. PiperOrigin-RevId: 217749904 Change-Id: I7ac434d5befd230db1488446cda03300cc0751a9
2018-10-11Make debug log file name configurableFabricio Voznika
This is a breaking change if you're using --debug-log-dir. The fix is to replace it with --debug-log and add a '/' at the end: --debug-log-dir=/tmp/runsc ==> --debug-log=/tmp/runsc/ PiperOrigin-RevId: 216761212 Change-Id: I244270a0a522298c48115719fa08dad55e34ade1
2018-10-10Add sandbox to cgroupFabricio Voznika
Sandbox creation uses the limits and reservations configured in the OCI spec and set cgroup options accordinly. Then it puts both the sandbox and gofer processes inside the cgroup. It also allows the cgroup to be pre-configured by the caller. If the cgroup already exists, sandbox and gofer processes will join the cgroup but it will not modify the cgroup with spec limits. PiperOrigin-RevId: 216538209 Change-Id: If2c65ffedf55820baab743a0edcfb091b89c1019
2018-09-28Switch to root in userns when CAP_SYS_CHROOT is also missingFabricio Voznika
Some tests check current capabilities and re-run the tests as root inside userns if required capabibilities are missing. It was checking for CAP_SYS_ADMIN only, CAP_SYS_CHROOT is also required now. PiperOrigin-RevId: 214949226 Change-Id: Ic81363969fa76c04da408fae8ea7520653266312
2018-09-19Fix sandbox and gofer capabilitiesFabricio Voznika
Capabilities.Set() adds capabilities, but doesn't remove existing ones that might have been loaded. Fixed the code and added tests. PiperOrigin-RevId: 213726369 Change-Id: Id7fa6fce53abf26c29b13b9157bb4c6616986fba
2018-09-19Add docker command line args support for --cpuset-cpus and --cpusLingfu
`docker run --cpuset-cpus=/--cpus=` will generate cpu resource info in config.json (runtime spec file). When nginx worker_connections is configured as auto, the worker is generated according to the number of CPUs. If the cgroup is already set on the host, but it is not displayed correctly in the sandbox, performance may be degraded. This patch can get cpus info from spec file and apply to sentry on bootup, so the /proc/cpuinfo can show the correct cpu numbers. `lscpu` and other commands rely on `/sys/devices/system/cpu/online` are also affected by this patch. e.g. --cpuset-cpus=2,3 -> cpu number:2 --cpuset-cpus=4-7 -> cpu number:4 --cpus=2.8 -> cpu number:3 --cpus=0.5 -> cpu number:1 Change-Id: Ideb22e125758d4322a12be7c51795f8018e3d316 PiperOrigin-RevId: 213685199
2018-09-07runsc: Support multi-container exec.Nicolas Lacasse
We must use a context.Context with a Root Dirent that corresponds to the container's chroot. Previously we were using the root context, which does not have a chroot. Getting the correct context required refactoring some of the path-lookup code. We can't lookup the path without a context.Context, which requires kernel.CreateProcArgs, which we only get inside control.Execute. So we have to do the path lookup much later than we previously were. PiperOrigin-RevId: 212064734 Change-Id: I84a5cfadacb21fd9c3ab9c393f7e308a40b9b537
2018-09-07runsc: Run sandbox process inside minimal chroot.Nicolas Lacasse
We construct a dir with the executable bind-mounted at /exe, and proc mounted at /proc. Runsc now executes the sandbox process inside this chroot, thus limiting access to the host filesystem. The mounts and chroot dir are removed when the sandbox is destroyed. Because this requires bind-mounts, we can only do the chroot if we have CAP_SYS_ADMIN. PiperOrigin-RevId: 211994001 Change-Id: Ia71c515e26085e0b69b833e71691830148bc70d1
2018-09-05runsc: Promote getExecutablePathInternal to getExecutablePath.Nicolas Lacasse
Remove GetExecutablePath (the non-internal version). This makes path handling more consistent between exec, root, and child containers. The new getExecutablePath now uses MountNamespace.FindInode, which is more robust than Walking the Dirent tree ourselves. This also removes the last use of lstat(2) in the sentry, so that can be removed from the filters. PiperOrigin-RevId: 211683110 Change-Id: Ic8ec960fc1c267aa7d310b8efe6e900c88a9207a
2018-09-04runsc: Run sandbox as user nobody.Nicolas Lacasse
When starting a sandbox without direct file or network access, we create an empty user namespace and run the sandbox in there. However, the root user in that namespace is still mapped to the root user in the parent namespace. This CL maps the "nobody" user from the parent namespace into the child namespace, and runs the sandbox process as user "nobody" inside the new namespace. PiperOrigin-RevId: 211572223 Change-Id: I1b1f9b1a86c0b4e7e5ca7bc93be7d4887678bab6
2018-09-04runsc: Pass log and config files to sandbox process by FD.Nicolas Lacasse
This is a prereq for running the sandbox process as user "nobody", when it may not have permissions to open these files. Instead, we must open then before starting the sandbox process, and pass them by FD. The specutils.ReadSpecFromFile method was fixed to always seek to the beginning of the file before reading. This allows Files from the same FD to be read multiple times, as we do in the boot command when the apply-caps flag is set. Tested with --network=host. PiperOrigin-RevId: 211570647 Change-Id: I685be0a290aa7f70731ebdce82ebc0ebcc9d475c
2018-09-04runsc: fix container rootfs path.Lantao Liu
PiperOrigin-RevId: 211515350 Change-Id: Ia495af57447c799909aa97bb873a50b87bee2625
2018-08-31Automated rollback of changelist 210995199Fabricio Voznika
PiperOrigin-RevId: 211116429 Change-Id: I446d149c822177dc9fc3c64ce5e455f7f029aa82
2018-08-30runsc: Pass log and config files to sandbox process by FD.Nicolas Lacasse
This is a prereq for running the sandbox process as user "nobody", when it may not have permissions to open these files. Instead, we must open then before starting the sandbox process, and pass them by FD. PiperOrigin-RevId: 210995199 Change-Id: I715875a9553290b4a49394a8fcd93be78b1933dd
2018-08-27Put fsgofer inside chrootFabricio Voznika
Now each container gets its own dedicated gofer that is chroot'd to the rootfs path. This is done to add an extra layer of security in case the gofer gets compromised. PiperOrigin-RevId: 210396476 Change-Id: Iba21360a59dfe90875d61000db103f8609157ca0
2018-08-24runsc: Allow runsc to properly search the PATH for executable name.Kevin Krakauer
Previously, runsc improperly attempted to find an executable in the container's PATH. We now search the PATH via the container's fsgofer rather than the host FS, eliminating the confusing differences between paths on the host and within a container. PiperOrigin-RevId: 210159488 Change-Id: I228174dbebc4c5356599036d6efaa59f28ff28d2
2018-07-31Use backoff package for retry logicFabricio Voznika
PiperOrigin-RevId: 206834838 Change-Id: I9a44c6fa5f4766a01f86e90810f025cefecdf2d4
2018-07-10Modified error message for clarity.Brielle Broder
Previously, error message only showed "<nil>" when child and pid were the same (since no error is returned by the Wait4 syscall in this case) which occurs when the process has incorrectly terminated. A new error message was added to improve clarity for such a case. Tests for this function were modified to reflect the improved distinction between process termination and error. PiperOrigin-RevId: 204018107 Change-Id: Ib38481c9590405e5bafcb6efe27fd49b3948910c
2018-06-29Sets the restore environment for restoring a container.Justine Olshan
Updated how restoring occurs through boot.go with a separate Restore function. This prevents a new process and new mounts from being created. Added tests to ensure the container is restored. Registered checkpoint and restore commands so they can be used. Docker support for these commands is still limited. Working on #80. PiperOrigin-RevId: 202710950 Change-Id: I2b893ceaef6b9442b1ce3743bd112383cb92af0c
2018-06-28Error out if spec is invalidFabricio Voznika
Closes #66 PiperOrigin-RevId: 202496258 Change-Id: Ib9287c5bf1279ffba1db21ebd9e6b59305cddf34
2018-06-19runsc: Enable container creation within existing sandboxes.Kevin Krakauer
Containers are created as processes in the sandbox. Of the many things that don't work yet, the biggest issue is that the fsgofer is launched with its root as the sandbox's root directory. Thus, when a container is started and wants to read anything (including the init binary of the container), the gofer tries to serve from sandbox's root (which basically just has pause), not the container's. PiperOrigin-RevId: 201294560 Change-Id: I6423aa8830538959c56ae908ce067e4199d627b1
2018-06-18runsc: support symlink to the exec path.Lantao Liu
PiperOrigin-RevId: 201049912 Change-Id: Idd937492217a4c2ca3d59c602e41576a3b203dd9
2018-06-15runsc: support /dev bind mount which does not conflict with default /dev mount.Lantao Liu
PiperOrigin-RevId: 200768923 Change-Id: I4b8da10bcac296e8171fe6754abec5aabfec5e65
2018-06-04Refactor container_test in preparation for sandbox_testFabricio Voznika
Common code to setup and run sandbox is moved to testutil. Also, don't link "boot" and "gofer" commands with test binary. Instead, use runsc binary from the build. This not only make the test setup simpler, but also resolves a dependency issue with sandbox_tests not depending on container package. PiperOrigin-RevId: 199164478 Change-Id: I27226286ca3f914d4d381358270dd7d70ee8372f
2018-05-15Refactor the Sandbox package into Sandbox + Container.Nicolas Lacasse
This is a necessary prerequisite for supporting multiple containers in a single sandbox. All the commands (in cmd package) now call operations on Containers (container package). When a Container first starts, it will create a Sandbox with the same ID. The Sandbox class is now simpler, as it only knows how to create boot/gofer processes, and how to forward commands into the running boot process. There are TODOs sprinkled around for additional support for multiple containers. Most notably, we need to detect when a container is intended to run in an existing sandbox (by reading the metadata), and then have some way to signal to the sandbox to start a new container. Other urpc calls into the sandbox need to pass the container ID, so the sandbox can run the operation on the given container. These are only half-plummed through right now. PiperOrigin-RevId: 196688269 Change-Id: I1ecf4abbb9dd8987a53ae509df19341aaf42b5b0
2018-05-04Fix runsc capabilitiesFabricio Voznika
There was a typo and one new capability missing from the list PiperOrigin-RevId: 195427713 Change-Id: I6d9e1c6e77b48fe85ef10d9f54c70c8a7271f6e7
2018-05-03Return error when child exits earlyFabricio Voznika
PiperOrigin-RevId: 195365050 Change-Id: I8754dc7a3fc2975d422cae453762a455478a8e6a
2018-04-28Check in gVisor.Googler
PiperOrigin-RevId: 194583126 Change-Id: Ica1d8821a90f74e7e745962d71801c598c652463
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 20:17:39 +0000