| Age | Commit message (Collapse) | Author |
|---|
|
PiperOrigin-RevId: 217433699
Change-Id: Icef08285728c23ee7dd650706aaf18da51c25dff
|
|
We treat handle the boot process stdio separately from the application stdio
(which gets passed via flags), but we were still sending both to same place. As
a result, some logs that are written directly to os.Stderr by the boot process
were ending up in the application logs.
This CL starts sendind boot process stdio to the null device (since we don't
have any better options). The boot process is already configured to send all
logs (and panics) to the log file, so we won't miss anything important.
PiperOrigin-RevId: 217173020
Change-Id: I5ab980da037f34620e7861a3736ba09c18d73794
|
|
This is done to further isolate the gofer from the host.
PiperOrigin-RevId: 216790991
Change-Id: Ia265b77e4e50f815d08f743a05669f9d75ad7a6f
|
|
It's possible for Start() and Wait() calls to race, if the sandboxed
application is short-lived. If the application finishes before (or during) the
Wait RPC, then Wait will fail. In practice this looks like "connection
refused" or "EOF" errors when waiting for an RPC response.
This race is especially bad in tests, where we often run "true" inside a
sandbox.
This CL does a best-effort fix, by returning the sandbox exit status as the
container exit status. In most cases, these are the same.
This fixes the remaining flakes in runsc/container:container_test.
PiperOrigin-RevId: 216777793
Change-Id: I9dfc6e6ec885b106a736055bc7a75b2008dfff7a
|
|
This is a breaking change if you're using --debug-log-dir.
The fix is to replace it with --debug-log and add a '/' at
the end:
--debug-log-dir=/tmp/runsc ==> --debug-log=/tmp/runsc/
PiperOrigin-RevId: 216761212
Change-Id: I244270a0a522298c48115719fa08dad55e34ade1
|
|
This change introduces a new flags to create/run called
--user-log. Logs to this files are visible to users and
are meant to help debugging problems with their images
and containers.
For now only unsupported syscalls are sent to this log,
and only minimum support was added. We can build more
infrastructure around it as needed.
PiperOrigin-RevId: 216735977
Change-Id: I54427ca194604991c407d49943ab3680470de2d0
|
|
When setting Cmd.SysProcAttr.Ctty, the FD must be the FD of the controlling TTY
in the new process, not the current process. The ioctl call is made after
duping all FDs in Cmd.ExtraFiles, which may stomp on the old TTY FD.
This fixes the "bad address" flakes in runsc/container:container_test, although
some other flakes remain.
PiperOrigin-RevId: 216594394
Change-Id: Idfd1677abb866aa82ad7e8be776f0c9087256862
|
|
Sandbox creation uses the limits and reservations configured in the
OCI spec and set cgroup options accordinly. Then it puts both the
sandbox and gofer processes inside the cgroup.
It also allows the cgroup to be pre-configured by the caller. If the
cgroup already exists, sandbox and gofer processes will join the
cgroup but it will not modify the cgroup with spec limits.
PiperOrigin-RevId: 216538209
Change-Id: If2c65ffedf55820baab743a0edcfb091b89c1019
|
|
Sandbox was setting chroot, but was not chaging the working
dir. Added test to ensure this doesn't happen in the future.
PiperOrigin-RevId: 215676270
Change-Id: I14352d3de64a4dcb90e50948119dc8328c9c15e1
|
|
We were previously using the sandbox process's stdio as the root container's
stdio. This makes it difficult/impossible to distinguish output application
output from sandbox output, such as panics, which are always written to stderr.
Also close the console socket when we are done with it.
PiperOrigin-RevId: 215585180
Change-Id: I980b8c69bd61a8b8e0a496fd7bc90a06446764e0
|
|
Terminal support in runsc relies on host tty file descriptors that are imported
into the sandbox. Application tty ioctls are sent directly to the host fd.
However, those host tty ioctls are associated in the host kernel with a host
process (in this case runsc), and the host kernel intercepts job control
characters like ^C and send signals to the host process. Thus, typing ^C into a
"runsc exec" shell will send a SIGINT to the runsc process.
This change makes "runsc exec" handle all signals, and forward them into the
sandbox via the "ContainerSignal" urpc method. Since the "runsc exec" is
associated with a particular container process in the sandbox, the signal must
be associated with the same container process.
One big difficulty is that the signal should not necessarily be sent to the
sandbox process started by "exec", but instead must be sent to the foreground
process group for the tty. For example, we may exec "bash", and from bash call
"sleep 100". A ^C at this point should SIGINT sleep, not bash.
To handle this, tty files inside the sandbox must keep track of their
foreground process group, which is set/get via ioctls. When an incoming
ContainerSignal urpc comes in, we look up the foreground process group via the
tty file. Unfortunately, this means we have to expose and cache the tty file in
the Loader.
Note that "runsc exec" now handles signals properly, but "runs run" does not.
That will come in a later CL, as this one is complex enough already.
Example:
root@:/usr/local/apache2# sleep 100
^C
root@:/usr/local/apache2# sleep 100
^Z
[1]+ Stopped sleep 100
root@:/usr/local/apache2# fg
sleep 100
^C
root@:/usr/local/apache2#
PiperOrigin-RevId: 215334554
Change-Id: I53cdce39653027908510a5ba8d08c49f9cf24f39
|
|
And remove multicontainer option.
PiperOrigin-RevId: 215236981
Change-Id: I9fd1d963d987e421e63d5817f91a25c819ced6cb
|
|
PiperOrigin-RevId: 214976251
Change-Id: I631348c3886f41f63d0e77e7c4f21b3ede2ab521
|
|
Some tests check current capabilities and re-run the tests as root inside
userns if required capabibilities are missing. It was checking for
CAP_SYS_ADMIN only, CAP_SYS_CHROOT is also required now.
PiperOrigin-RevId: 214949226
Change-Id: Ic81363969fa76c04da408fae8ea7520653266312
|
|
In order to implement kill --all correctly, the Sentry needs
to track all tasks that belong to a given container. This change
introduces ContainerID to the task, that gets inherited by all
children. 'kill --all' then iterates over all tasks comparing the
ContainerID field to find all processes that need to be signalled.
PiperOrigin-RevId: 214841768
Change-Id: I693b2374be8692d88cc441ef13a0ae34abf73ac6
|
|
This makes the flow slightly simpler (no need to call
Loader.SetRootContainer). And this is required change to tag
tasks with container ID inside the Sentry.
PiperOrigin-RevId: 214795210
Change-Id: I6ff4af12e73bb07157f7058bb15fd5bb88760884
|
|
I've made several attempts to create a test, but the lack of
permission from the test user makes it nearly impossible to
test anything useful.
PiperOrigin-RevId: 213922174
Change-Id: I5b502ca70cb7a6645f8836f028fb203354b4c625
|
|
The issue with the previous change was that the stdin/stdout/stderr passed to
the sentry were dup'd by host.ImportFile. This left a dangling FD that by never
closing caused containerd to timeout waiting on container stop.
PiperOrigin-RevId: 213753032
Change-Id: Ia5e4c0565c42c8610d3b59f65599a5643b0901e4
|
|
This method will:
1. Stop the container process if it is still running.
2. Unmount all sanadbox-internal mounts for the container.
3. Delete the contaner root directory inside the sandbox.
Destroy is idempotent, and safe to call concurrantly.
This fixes a bug where after stopping a container, we cannot unmount the
container root directory on the host. This bug occured because the sandbox
dirent cache was holding a dirent with a host fd corresponding to a file inside
the container root on the host. The dirent cache did not know that the
container had exited, and kept the FD open, preventing us from unmounting on
the host.
Now that we unmount (and flush) all container mounts inside the sandbox, any
host FDs donated by the gofer will be closed, and we can unmount the container
root on the host.
PiperOrigin-RevId: 213737693
Change-Id: I28c0ff4cd19a08014cdd72fec5154497e92aacc9
|
|
Reap children more systematically in container tests. Previously,
container_test was taking ~5 mins to run because constainer.Destroy()
would timeout waiting for the sandbox process to exit. Now the test
running in less than a minute.
Also made the contract around Container and Sandbox destroy clearer.
PiperOrigin-RevId: 213527471
Change-Id: Icca84ee1212bbdcb62bdfc9cc7b71b12c6d1688d
|
|
PiperOrigin-RevId: 213504354
Change-Id: Iadd42f0ca4b7e7a9eae780bee9900c7233fb4f3f
|
|
This makes `runsc wait` behave more like waitpid()/wait4() in that:
- Once a process has run to completion, you can wait on it and get its exit
code.
- Processes not waited on will consume memory (like a zombie process)
PiperOrigin-RevId: 213358916
Change-Id: I5b5eca41ce71eea68e447380df8c38361a4d1558
|
|
Stdin/out/err weren't being sent to the sentry.
PiperOrigin-RevId: 213307171
Change-Id: Ie4b634a58b1b69aa934ce8597e5cc7a47a2bcda2
|
|
This CL:
1) Fix `runsc wait`, it now also works after the container exits;
2) Generate correct container state in Load;
2) Make sure `Destory` cleanup everything before successfully return.
PiperOrigin-RevId: 212900107
Change-Id: Ie129cbb9d74f8151a18364f1fc0b2603eac4109a
|
|
This is different from the existing -pid-file flag, which saves a host pid.
PiperOrigin-RevId: 212713968
Change-Id: I2c486de8dd5cfd9b923fb0970165ef7c5fc597f0
|
|
We were previously openining the platform device (i.e. /dev/kvm) inside the
platfrom constructor (i.e. kvm.New). This requires that we have RW access to
the platform device when constructing the platform.
However, now that the runsc sandbox process runs as user "nobody", it is not
able to open the platform device.
This CL changes the kvm constructor to take the platform device FD, rather than
opening the device file itself. The device file is opened outside of the
sandbox and passed to the sandbox process.
PiperOrigin-RevId: 212505804
Change-Id: I427e1d9de5eb84c84f19d513356e1bb148a52910
|
|
Inside the chroot, we run as user nobody, so all mounted files and directories
must be accessible to all users.
PiperOrigin-RevId: 212284805
Change-Id: I705e0dbbf15e01e04e0c7f378a99daffe6866807
|
|
We must use a context.Context with a Root Dirent that corresponds to the
container's chroot. Previously we were using the root context, which does not
have a chroot.
Getting the correct context required refactoring some of the path-lookup code.
We can't lookup the path without a context.Context, which requires
kernel.CreateProcArgs, which we only get inside control.Execute. So we have to
do the path lookup much later than we previously were.
PiperOrigin-RevId: 212064734
Change-Id: I84a5cfadacb21fd9c3ab9c393f7e308a40b9b537
|
|
It was used before gofer was implemented and it's not
supported anymore.
BREAKING CHANGE: proxy-shared and proxy-exclusive options
are now: shared and exclusive.
PiperOrigin-RevId: 212017643
Change-Id: If029d4073fe60583e5ca25f98abb2953de0d78fd
|
|
We construct a dir with the executable bind-mounted at /exe, and proc mounted
at /proc. Runsc now executes the sandbox process inside this chroot, thus
limiting access to the host filesystem. The mounts and chroot dir are removed
when the sandbox is destroyed.
Because this requires bind-mounts, we can only do the chroot if we have
CAP_SYS_ADMIN.
PiperOrigin-RevId: 211994001
Change-Id: Ia71c515e26085e0b69b833e71691830148bc70d1
|
|
PiperOrigin-RevId: 211834411
Change-Id: I52311a6c5407f984e5069359d9444027084e4d2a
|
|
When starting a sandbox without direct file or network access, we create an
empty user namespace and run the sandbox in there. However, the root user in
that namespace is still mapped to the root user in the parent namespace.
This CL maps the "nobody" user from the parent namespace into the child
namespace, and runs the sandbox process as user "nobody" inside the new
namespace.
PiperOrigin-RevId: 211572223
Change-Id: I1b1f9b1a86c0b4e7e5ca7bc93be7d4887678bab6
|
|
This is a prereq for running the sandbox process as user "nobody", when it may
not have permissions to open these files.
Instead, we must open then before starting the sandbox process, and pass them
by FD.
The specutils.ReadSpecFromFile method was fixed to always seek to the beginning
of the file before reading. This allows Files from the same FD to be read
multiple times, as we do in the boot command when the apply-caps flag is set.
Tested with --network=host.
PiperOrigin-RevId: 211570647
Change-Id: I685be0a290aa7f70731ebdce82ebc0ebcc9d475c
|
|
PiperOrigin-RevId: 211116429
Change-Id: I446d149c822177dc9fc3c64ce5e455f7f029aa82
|
|
This is a prereq for running the sandbox process as user "nobody", when it may
not have permissions to open these files.
Instead, we must open then before starting the sandbox process, and pass them
by FD.
PiperOrigin-RevId: 210995199
Change-Id: I715875a9553290b4a49394a8fcd93be78b1933dd
|
|
Now each container gets its own dedicated gofer that is chroot'd to the
rootfs path. This is done to add an extra layer of security in case the
gofer gets compromised.
PiperOrigin-RevId: 210396476
Change-Id: Iba21360a59dfe90875d61000db103f8609157ca0
|
|
This CL adds terminal support for "docker exec". We previously only supported
consoles for the container process, but not exec processes.
The SYS_IOCTL syscall was added to the default seccomp filter list, but only
for ioctls that get/set winsize and termios structs. We need to allow these
ioctl for all containers because it's possible to run "exec -ti" on a
container that was started without an attached console, after the filters
have been installed.
Note that control-character signals are still not properly supported.
Tested with:
$ docker run --runtime=runsc -it alpine
In another terminial:
$ docker exec -it <containerid> /bin/sh
PiperOrigin-RevId: 210185456
Change-Id: I6d2401e53a7697bb988c120a8961505c335f96d9
|
|
This is used when '--overlay=true' to guarantee writes are not sent to gofer.
PiperOrigin-RevId: 210116288
Change-Id: I7616008c4c0e8d3668e07a205207f46e2144bf30
|
|
PiperOrigin-RevId: 209647293
Change-Id: I980fca1257ea3fcce796388a049c353b0303a8a5
|
|
Tests get a readonly rootfs mapped to / (which was the case before)
and writable TEST_TMPDIR. This makes it easier to setup containers to
write to files and to share state between test and containers.
PiperOrigin-RevId: 209453224
Change-Id: I4d988e45dc0909a0450a3bb882fe280cf9c24334
|
|
When multiple containers run inside a sentry, each container has its own root
filesystem and set of mounts. Containers are also added after sentry boot rather
than all configured and known at boot time.
The fsgofer needs to be able to serve the root filesystem of each container.
Thus, it must be possible to add filesystems after the fsgofer has already
started.
This change:
* Creates a URPC endpoint within the gofer process that listens for requests to
serve new content.
* Enables the sentry, when starting a new container, to add the new container's
filesystem.
* Mounts those new filesystems at separate roots within the sentry.
PiperOrigin-RevId: 208903248
Change-Id: Ifa91ec9c8caf5f2f0a9eead83c4a57090ce92068
|
|
Previously, gofer filesystems were configured with the default "fscache"
policy, which caches filesystem metadata and contents aggressively. While this
setting is best for performance, it means that changes from inside the sandbox
may not be immediately propagated outside the sandbox, and vice-versa.
This CL changes volumes and the root fs configuration to use a new
"remote-revalidate" cache policy which tries to retain as much caching as
possible while still making fs changes visible across the sandbox boundary.
This cache policy is enabled by default for the root filesystem. The default
value for the "--file-access" flag is still "proxy", but the behavior is
changed to use the new cache policy.
A new value for the "--file-access" flag is added, called "proxy-exclusive",
which turns on the previous aggressive caching behavior. As the name implies,
this flag should be used when the sandbox has "exclusive" access to the
filesystem.
All volume mounts are configured to use the new cache policy, since it is
safest and most likely to be correct. There is not currently a way to change
this behavior, but it's possible to add such a mechanism in the future. The
configurability is a smaller issue for volumes, since most of the expensive
application fs operations (walking + stating files) will likely served by the
root fs.
PiperOrigin-RevId: 208735037
Change-Id: Ife048fab1948205f6665df8563434dbc6ca8cfc9
|
|
PiperOrigin-RevId: 207581723
Change-Id: I6e4eb1227b5ed302de5e6c891040b670955f1eea
|
|
PiperOrigin-RevId: 205714667
Change-Id: I317a2ca98ac3bdad97c4790fcc61b004757d99ef
|
|
PiperOrigin-RevId: 205470108
Change-Id: I226878a887fe1133561005357a9e3b09428b06b6
|
|
PiperOrigin-RevId: 205334841
Change-Id: Ia60d486f9aae70182fdc4af50cf7c915986126d7
|
|
Docker expects containers to be created before they are restored.
However, gVisor restoring requires specificactions regarding the kernel
and the file system. These actions were originally in booting the sandbox.
Now setting up the file system is deferred until a call to a call to
runsc start. In the restore case, the kernel is destroyed and a new kernel
is created in the same process, as we need the same process for Docker.
These changes required careful execution of concurrent processes which
required the use of a channel.
Full docker integration still needs the ability to restore into the same
container.
PiperOrigin-RevId: 205161441
Change-Id: Ie1d2304ead7e06855319d5dc310678f701bd099f
|
|
Users can now call "runsc wait <container id>" to wait on a particular process
inside the container. -pid can also be used to wait on a specific PID.
Manually tested the wait subcommand for a single waiter and multiple waiters
(simultaneously 2 processes waiting on the container and 2 processes waiting on
a PID within the container).
PiperOrigin-RevId: 202548978
Change-Id: Idd507c2cdea613c3a14879b51cfb0f7ea3fb3d4c
|
|
Closes #71
PiperOrigin-RevId: 202532762
Change-Id: I80a446ff638672ff08e6fd853cd77e28dd05d540
|
|
PiperOrigin-RevId: 201742160
Change-Id: Ia9fa1442287c5f9e1196fb117c41536a80f6bb31
|
