| Age | Commit message (Collapse) | Author |
|---|
|
|
|
It was confusing to find functions relating to root and non-root
containers. Replace "non-root" and "subcontainer" and make naming
consistent in Sandbox and controller.
PiperOrigin-RevId: 384512518
|
|
|
|
Set stdio ownership based on the container's user to ensure the
user can open/read/write to/from stdios.
1. stdios in the host are changed to have the owner be the same
uid/gid of the process running the sandbox. This ensures that the
sandbox has full control over it.
2. stdios owner owner inside the sandbox is changed to match the
container's user to give access inside the container and make it
behave the same as runc.
Fixes #6180
PiperOrigin-RevId: 384347009
|
|
|
|
PiperOrigin-RevId: 384344990
|
|
|
|
The typical sequence of calls to start a container looks like this
ct, err := container.New(conf, containerArgs)
defer ct.Destroy()
ct.Start(conf)
ws, err := ct.Wait()
For the root container, ct.Destroy() kills the sandbox process. This
doesn't look like a right wait to stop it. For example, all ongoing rpc
calls are aborted in this case. If everything is going alright, we can
just wait and it will exit itself.
Reported-by: syzbot+084fca334720887441e7@syzkaller.appspotmail.com
Signed-off-by: Andrei Vagin <avagin@gmail.com>
|
|
|
|
PiperOrigin-RevId: 374981100
|
|
|
|
When loading cgroups for another process, `/proc/self` was used in
a few places, causing the end state to be a mix of the process
and self. This is now fixes to always use the proper `/proc/[pid]`
path.
Added net_prio and net_cls to the list of optional controllers. This
is to allow runsc to execute then these cgroups are disabled as long
as there are no net_prio and net_cls limits that need to be applied.
Deflake TestMultiContainerEvent.
Closes #5875
Closes #5887
PiperOrigin-RevId: 372242687
|
|
|
|
Add a coverage-report flag that will cause the sandbox to generate a coverage
report (with suffix .cov) in the debug log directory upon exiting. For the
report to be generated, runsc must have been built with the following Bazel
flags: `--collect_code_coverage --instrumentation_filter=...`.
With coverage reports, we should be able to aggregate results across all tests
to surface code coverage statistics for the project as a whole.
The report is simply a text file with each line representing a covered block
as `file:start_line.start_col,end_line.end_col`. Note that this is similar to
the format of coverage reports generated with `go test -coverprofile`,
although we omit the count and number of statements, which are not useful for
us.
Some simple ways of getting coverage reports:
bazel test <some_test> --collect_code_coverage \
--instrumentation_filter=//pkg/...
bazel build //runsc --collect_code_coverage \
--instrumentation_filter=//pkg/...
runsc -coverage-report=dir/ <other_flags> do ...
PiperOrigin-RevId: 368952911
|
|
|
|
PiperOrigin-RevId: 367446222
|
|
|
|
The syscall package has been deprecated in favor of golang.org/x/sys.
Note that syscall is still used in some places because the following don't seem
to have an equivalent in unix package:
- syscall.SysProcIDMap
- syscall.Credential
Updates #214
PiperOrigin-RevId: 361381490
|
|
|
|
Because we lack gVisor-internal cgroups, we take the CPU usage of the entire pod
and divide it proportionally according to sentry-internal usage stats.
This fixes `kubectl top pods`, which gets a pod's CPU usage by summing the usage
of its containers.
Addresses #172.
PiperOrigin-RevId: 355229833
|
|
|
|
These are primarily simplification and lint mistakes. However, minor
fixes are also included and tests added where appropriate.
PiperOrigin-RevId: 351425971
|
|
|
|
This includes minor fix-ups:
* Handle SIGTERM in runsc debug, to exit gracefully.
* Fix cmd.debug.go opening all profiles as RDONLY.
* Fix the test name in fio_test.go, and encode the block size in the test.
PiperOrigin-RevId: 350205718
|
|
|
|
This allows for a model of profiling when you can start collection, and
it will terminate when the sandbox terminates. Without this synchronous
call, it is effectively impossible to collect length blocking and mutex
profiles.
PiperOrigin-RevId: 349483418
|
|
|
|
fdbased endpoint was enabling fragment reassembly on the host AF_PACKET socket
to ensure that fragments are delivered inorder to the right dispatcher. But this
prevents fragments from being delivered to gvisor at all and makes testing of
gvisor's fragment reassembly code impossible.
The potential impact from this is minimal since IP Fragmentation is not really
that prevelant and in cases where we do get fragments we may deliver the
fragment out of order to the TCP layer as multiple network dispatchers may
process the fragments and deliver a reassembled fragment after the next packet
has been delivered to the TCP endpoint. While not desirable I believe the impact
from this is minimal due to low prevalence of fragmentation.
Also removed PktType and Hatype fields when binding the socket as these are not
used when binding. Its just confusing to have them specified.
See: https://man7.org/linux/man-pages/man7/packet.7.html
"Fields used for binding are
sll_family (should be AF_PACKET), sll_protocol, and sll_ifindex."
Fixes #5055
PiperOrigin-RevId: 346919439
|
|
|
|
Closes #4022
PiperOrigin-RevId: 343378647
|
|
|
|
Fixes #2714
PiperOrigin-RevId: 342950412
|
|
|
|
When OOM score adjustment needs to be set, all the containers need to be
loaded to find all containers that belong to the sandbox. However, each
load signals the container to ensure it is still alive. OOM score
adjustment is set during creation and deletion of every container, generating
a flood of signals to all containers. The fix removes the signal check
when it's not needed.
There is also a race fetching OOM score adjustment value from the parent when
the sandbox exits at the same time (the time it took to signal containers above
made this window quite large). The fix is to store the original value
in the sandbox state file and use it when the value needs to be restored.
Also add more logging and made the existing ones more consistent to help with
debugging.
PiperOrigin-RevId: 340940799
|
|
|
|
PiperOrigin-RevId: 335714100
|
|
|
|
When all container tasks finish, they release the mount which in turn
will close the 9P session to the gofer. The gofer exits when the connection
closes, triggering the gofer monitor. The gofer monitor will _think_ that
the gofer died prematurely and destroy the container. Then when the caller
attempts to wait for the container, e.g. to get the exit code, wait fails
saying the container doesn't exist.
Gofer monitor now just SIGKILLs the container, and let the normal teardown
process to happen, which will evetually destroy the container at the right
time. Also, fixed an issue with exec racing with container's init process
exiting.
Closes #1487
PiperOrigin-RevId: 335537350
|
|
In --network=sandbox mode, we create SOCK_RAW sockets on the given
network device. The code tries to force-set 4MiB rcv and snd buffers
on it, but in certain situations it might fail. There is no reason
for refusing the sandbox startup in such case - we should bump the
buffers to max availabe size and just move on.
|
|
|
|
Updates #2972
PiperOrigin-RevId: 329584905
|
|
|
|
Use reflection and tags to provide automatic conversion from
Config to flags. This makes adding new flags less error-prone,
skips flags using default values (easier to read), and makes
tests correctly use default flag values for test Configs.
Updates #3494
PiperOrigin-RevId: 328662070
|
|
|
|
Updates #3494
PiperOrigin-RevId: 327548511
|
|
|
|
Also removes `--profile-goroutine` because it's equivalent
to `debug --stacks`.
PiperOrigin-RevId: 325061502
|
|
|
|
- Combine process creation code that is shared between
root and subcontainer processes
- Move root container information into a struct for
clarity
Updates #2714
PiperOrigin-RevId: 321204798
|
|
PiperOrigin-RevId: 321053634
|
