summaryrefslogtreecommitdiffhomepage
path: root/runsc/sandbox/sandbox.go
AgeCommit message (Collapse)Author
2020-02-28Allow to specify a separate log for GO's runtime messagesAndrei Vagin
GO's runtime calls the write system call twice to print "panic:" and "the reason of this panic", so here is a race window when other threads can print something to the log and we will see something like this: panic: log messages from another thread The reason of the panic. This confuses the syzkaller blacklist and dedup detection. It also makes the logs generally difficult to read. e.g., data races often have one side of the race, followed by a large "diagnosis" dump, finally followed by the other side of the race. PiperOrigin-RevId: 297887895
2020-01-09New sync package.Ian Gudger
* Rename syncutil to sync. * Add aliases to sync types. * Replace existing usage of standard library sync package. This will make it easier to swap out synchronization primitives. For example, this will allow us to use primitives from github.com/sasha-s/go-deadlock to check for lock ordering violations. Updates #1472 PiperOrigin-RevId: 289033387
2019-12-17Leave minimum CPU number as a constantAleksandr Razumov
Remove introduced CPUNumMin config and hard-code it as 2.
2019-12-17Add minimum CPU number and only lower CPUs on --cpu-num-from-quotaAleksandr Razumov
* Add `--cpu-num-min` flag to control minimum CPUs * Only lower CPU count * Fix comments
2019-12-15Set CPU number to CPU quotaAleksandr Razumov
When application is not cgroups-aware, it can spawn excessive threads which often defaults to CPU number. Introduce a opt-in flag that will set CPU number accordingly to CPU quota (if available). Fixes #1391
2019-12-05Fix possible race condition destroying containerFabricio Voznika
When the sandbox is destroyed, making URPC calls to destroy the container will fail. The code was checking if the sandbox was running before attempting to make the URPC call, but that is racy. PiperOrigin-RevId: 284093764
2019-09-25Fix runsc log collection in kokoroFabricio Voznika
PiperOrigin-RevId: 271207152
2019-09-16Bring back to life features lost in recent refactorFabricio Voznika
- Sandbox logs are generated when running tests - Kokoro uploads the sandbox logs - Supports multiple parallel runs - Revive script to install locally built runsc with docker PiperOrigin-RevId: 269337274
2019-08-13tests: print stack traces if test failed by timeoutAndrei Vagin
PiperOrigin-RevId: 263184083
2019-08-01Set sandbox oom_score_adjIan Lewis
Set /proc/self/oom_score_adj based on oomScoreAdj specified in the OCI bundle. When new containers are added to the sandbox oom_score_adj for the sandbox and all other gofers are adjusted so that oom_score_adj is equal to the lowest oom_score_adj of all containers in the sandbox. Fixes #512 PiperOrigin-RevId: 261242725
2019-07-03Avoid importing platforms from many source filesAndrei Vagin
PiperOrigin-RevId: 256494243
2019-06-26Always set SysProcAttr.Ctty to an FD in the child's FD table.Nicolas Lacasse
Go was going to change the behavior of SysProcAttr.Ctty such that it must be an FD in the *parent* FD table: https://go-review.googlesource.com/c/go/+/178919/ However, after some debate, it was decided that this change was too backwards-incompatible, and so it was reverted. https://github.com/golang/go/issues/29458 The behavior going forward is unchanged: the Ctty FD must be an FD in the *child* FD table. PiperOrigin-RevId: 255228476
2019-06-25Use different Ctty FDs based on the go version.Nicolas Lacasse
An upcoming change in Go 1.13 [1] changes the semantics of the SysProcAttr.Ctty field. Prior to the change, the FD must be an FD in the child process's FD table (aka "post-shuffle"). After the change, the FD must be an FD in the current process's FD table (aka "pre-shuffle"). To be compatible with both versions this CL introduces a new boolean "CttyFdIsPostShuffle" which indicates whether a pre- or post-shuffle FD should be provided. We use build tags to chose the correct one. 1: https://go-review.googlesource.com/c/go/+/178919/ PiperOrigin-RevId: 255015303
2019-06-24Allow to change logging options using 'runsc debug'Fabricio Voznika
New options are: runsc debug --strace=off|all|function1,function2 runsc debug --log-level=warning|info|debug runsc debug --log-packets=true|false Updates #407 PiperOrigin-RevId: 254843128
2019-06-21Delete dangling comment line.Nicolas Lacasse
This was from an old comment, which was superseded by the existing comment which is correct. PiperOrigin-RevId: 254434535
2019-06-20Drop extra characterMichael Pratt
PiperOrigin-RevId: 254237530
2019-06-18Kill sandbox process when 'runsc do' exitsFabricio Voznika
PiperOrigin-RevId: 253882115
2019-06-18Add Container/Sandbox args struct for creationFabricio Voznika
There were 3 string arguments that could be easily misplaced and it makes it easier to add new arguments, especially for Container that has dozens of callers. PiperOrigin-RevId: 253872074
2019-06-13Update canonical repository.Adin Scannell
This can be merged after: https://github.com/google/gvisor-website/pull/77 or https://github.com/google/gvisor-website/pull/78 PiperOrigin-RevId: 253132620
2019-06-12Allow 'runsc do' to run without rootFabricio Voznika
'--rootless' flag lets a non-root user execute 'runsc do'. The drawback is that the sandbox and gofer processes will run as root inside a user namespace that is mapped to the caller's user, intead of nobody. And network is defaulted to '--network=host' inside the root network namespace. On the bright side, it's very convenient for testing: runsc --rootless do ls runsc --rootless do curl www.google.com PiperOrigin-RevId: 252840970
2019-06-03Remove 'clearStatus' option from container.Wait*PID()Fabricio Voznika
clearStatus was added to allow detached execution to wait on the exec'd process and retrieve its exit status. However, it's not currently used. Both docker and gvisor-containerd-shim wait on the "shim" process and retrieve the exit status from there. We could change gvisor-containerd-shim to use waits, but it will end up also consuming a process for the wait, which is similar to having the shim process. Closes #234 PiperOrigin-RevId: 251349490
2019-05-30Add support for collecting execution trace to runsc.Bhasker Hariharan
Updates #220 PiperOrigin-RevId: 250532302
2019-05-02runsc: don't create an empty network namespace if NetworkHost is setAndrei Vagin
With this change, we will be able to run runsc do in a host network namespace. PiperOrigin-RevId: 246436660 Change-Id: I8ea18b1053c88fe2feed74239b915fe7a151ce34
2019-05-02Add [simple] network support to 'runsc do'Fabricio Voznika
Sandbox always runsc with IP 192.168.10.2 and the peer network adds 1 to the address (192.168.10.3). Sandbox IP can be changed using --ip flag. Here a few examples: sudo runsc do curl www.google.com sudo runsc do --ip=10.10.10.2 bash -c "echo 123 | netcat -l -p 8080" PiperOrigin-RevId: 246421277 Change-Id: I7b3dce4af46a57300350dab41cb27e04e4b6e9da
2019-04-29Change copyright notice to "The gVisor Authors"Michael Pratt
Based on the guidelines at https://opensource.google.com/docs/releasing/authors/. 1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./' 2. Manual fixup of "Google Inc" references. 3. Add AUTHORS file. Authors may request to be added to this file. 4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS. Fixes #209 PiperOrigin-RevId: 245823212 Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
2019-04-29Allow and document bug ids in gVisor codebase.Nicolas Lacasse
PiperOrigin-RevId: 245818639 Change-Id: I03703ef0fb9b6675955637b9fe2776204c545789
2019-04-11Add 'runsc do' commandFabricio Voznika
It provides an easy way to run commands to quickly test gVisor. By default it maps the host root as the container root with a writable overlay on top (so the host root is not modified). Example: sudo runsc do ls -lh --color sudo runsc do ~/src/test/my-test.sh PiperOrigin-RevId: 243178711 Change-Id: I05f3d6ce253fe4b5f1362f4a07b5387f6ddb5dd9
2019-03-18Add support for mount propagationFabricio Voznika
Properly handle propagation options for root and mounts. Now usage of mount options shared, rshared, and noexec cause error to start. shared/ rshared breaks sandbox=>host isolation. slave however can be supported because changes propagate from host to sandbox. Root FS setup moved inside the gofer. Apart from simplifying the code, it keeps all mounts inside the namespace. And they are torn down when the namespace is destroyed (DestroyFS is no longer needed). PiperOrigin-RevId: 239037661 Change-Id: I8b5ee4d50da33c042ea34fa68e56514ebe20e6e0
2019-03-11Add profiling commands to runscFabricio Voznika
Example: runsc debug --root=<dir> \ --profile-heap=/tmp/heap.prof \ --profile-cpu=/tmp/cpu.prod --profile-delay=30 \ <container ID> PiperOrigin-RevId: 237848456 Change-Id: Icff3f20c1b157a84d0922599eaea327320dad773
2019-01-29runsc: reap a sandbox process only in sandbox.Wait()Andrei Vagin
PiperOrigin-RevId: 231504064 Change-Id: I585b769aef04a3ad7e7936027958910a6eed9c8d
2019-01-22Don't bind-mount runsc into a sandbox mntnsAndrei Vagin
PiperOrigin-RevId: 230437407 Change-Id: Id9d8ceeb018aad2fe317407c78c6ee0f4b47aa2b
2019-01-18Scrub runsc error messagesFabricio Voznika
Removed "error" and "failed to" prefix that don't add value from messages. Adjusted a few other messages. In particular, when the container fail to start, the message returned is easier for humans to read: $ docker run --rm --runtime=runsc alpine foobar docker: Error response from daemon: OCI runtime start failed: <path> did not terminate sucessfully: starting container: starting root container [foobar]: starting sandbox: searching for executable "foobar", cwd: "/", $PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin": no such file or directory Closes #77 PiperOrigin-RevId: 230022798 Change-Id: I83339017c70dae09e4f9f8e0ea2e554c4d5d5cd1
2019-01-18Start a sandbox process in a new userns only if CAP_SETUID is setAndrei Vagin
In addition, it fixes a race condition in TestMultiContainerGoferStop. There are two scripts copy the same set of files into the same directory and sometime one of this command fails with EXIST. PiperOrigin-RevId: 230011247 Change-Id: I9289f72e65dc407cdcd0e6cd632a509e01f43e9c
2019-01-18runsc: create a new proc mount if the sandbox process is running in a new pidnsAndrei Vagin
PiperOrigin-RevId: 229971902 Change-Id: Ief4fac731e839ef092175908de9375d725eaa3aa
2019-01-14runsc: set up a minimal chroot from the sandbox processAndrei Vagin
In this case, new mounts are not created in the host mount namspaces, so tearDownChroot isn't needed, because chroot will be destroyed with a sandbox mount namespace. In additional, pivot_root can't be called instead of chroot. PiperOrigin-RevId: 229250871 Change-Id: I765bdb587d0b8287a6a8efda8747639d37c7e7b6
2019-01-11runsc: Collect zombies of sandbox and gofer processesAndrei Vagin
And we need to wait a gofer process before cgroup.Uninstall, because it is running in the sandbox cgroups. PiperOrigin-RevId: 228904020 Change-Id: Iaf8826d5b9626db32d4057a1c505a8d7daaeb8f9
2019-01-09Restore to original cgroup after sandbox and gofer processes are createdFabricio Voznika
The original code assumed that it was safe to join and not restore cgroup, but Container.Run will not exit after calling start, making cgroup cleanup fail because there were still processes inside the cgroup. PiperOrigin-RevId: 228529199 Change-Id: I12a48d9adab4bbb02f20d71ec99598c336cbfe51
2019-01-03Apply chroot for --network=host tooFabricio Voznika
PiperOrigin-RevId: 227747566 Change-Id: Ide9df4ac1391adcd1c56e08d6570e0d149d85bc4
2018-12-28Simplify synchronization between runsc and sandbox processFabricio Voznika
Make 'runsc create' join cgroup before creating sandbox process. This removes the need to synchronize platform creation and ensure that sandbox process is charged to the right cgroup from the start. PiperOrigin-RevId: 227166451 Change-Id: Ieb4b18e6ca0daf7b331dc897699ca419bc5ee3a2
2018-12-06A sandbox process should wait until it has not been moved into cgroupsAndrei Vagin
PiperOrigin-RevId: 224418900 Change-Id: I53cf4d7c1c70117875b6920f8fd3d58a3b1497e9
2018-11-15Allow sandbox.Wait to be called after the sandbox has exited.Nicolas Lacasse
sandbox.Wait is racey, as the sandbox may have exited before it is called, or even during. We already had code to handle the case that the sandbox exits during the Wait call, but we were not properly handling the case where the sandbox has exited before the call. The best we can do in such cases is return the sandbox exit code as the application exit code. PiperOrigin-RevId: 221702517 Change-Id: I290d0333cc094c7c1c3b4ce0f17f61a3e908d787
2018-11-05Fix race between start and destroyFabricio Voznika
Before this change, a container starting up could race with destroy (aka delete) and leave processes behind. Now, whenever a container is created, Loader.processes gets a new entry. Start now expects the entry to be there, and if it's not it means that the container was deleted. I've also fixed Loader.waitPID to search for the process using the init process's PID namespace. We could use a few more tests for signal and wait. I'll send them in another cl. PiperOrigin-RevId: 220224290 Change-Id: I15146079f69904dc07d43c3b66cc343a2dab4cc4
2018-11-01Make error messages a bit more user friendly.Ian Lewis
Updated error messages so that it doesn't print full Go struct representations when running a new container in a sandbox. For example, this occurs frequently when commands are not found when doing a 'kubectl exec'. PiperOrigin-RevId: 219729141 Change-Id: Ic3a7bc84cd7b2167f495d48a1da241d621d3ca09
2018-10-21Updated cleanup code to be more explicit about ignoring errors.Ian Lewis
Errors are shown as being ignored by assigning to the blank identifier. PiperOrigin-RevId: 218103819 Change-Id: I7cc7b9d8ac503a03de5504ebdeb99ed30a531cf2
2018-10-19Use correct company name in copyright headerIan Gudger
PiperOrigin-RevId: 217951017 Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
2018-10-18Resolve mount paths while setting up root fs mountFabricio Voznika
It's hard to resolve symlinks inside the sandbox because rootfs and mounts may be read-only, forcing us to create mount points inside lower layer of an overlay, **before** the volumes are mounted. Since the destination must already be resolved outside the sandbox when creating mounts, take this opportunity to rewrite the spec with paths resolved. "runsc boot" will use the "resolved" spec to load mounts. In addition, symlink traversals were disabled while mounting containers inside the sandbox. It haven't been able to write a good test for it. So I'm relying on manual tests for now. PiperOrigin-RevId: 217749904 Change-Id: I7ac434d5befd230db1488446cda03300cc0751a9
2018-10-17runsc: Support job control signals for the root container.Nicolas Lacasse
Now containers run with "docker run -it" support control characters like ^C and ^Z. This required refactoring our signal handling a bit. Signals delivered to the "runsc boot" process are turned into loader.Signal calls with the appropriate delivery mode. Previously they were always sent directly to PID 1. PiperOrigin-RevId: 217566770 Change-Id: I5b7220d9a0f2b591a56335479454a200c6de8732
2018-10-16Bump sandbox start and stop timeouts.Nicolas Lacasse
PiperOrigin-RevId: 217433699 Change-Id: Icef08285728c23ee7dd650706aaf18da51c25dff
2018-10-15Never send boot process stdio to application stdio.Nicolas Lacasse
We treat handle the boot process stdio separately from the application stdio (which gets passed via flags), but we were still sending both to same place. As a result, some logs that are written directly to os.Stderr by the boot process were ending up in the application logs. This CL starts sendind boot process stdio to the null device (since we don't have any better options). The boot process is already configured to send all logs (and panics) to the log file, so we won't miss anything important. PiperOrigin-RevId: 217173020 Change-Id: I5ab980da037f34620e7861a3736ba09c18d73794
2018-10-11Make the gofer process enter namespacesFabricio Voznika
This is done to further isolate the gofer from the host. PiperOrigin-RevId: 216790991 Change-Id: Ia265b77e4e50f815d08f743a05669f9d75ad7a6f
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 18:25:57 +0000