summaryrefslogtreecommitdiffhomepage
path: root/runsc/sandbox/BUILD
AgeCommit message (Collapse)Author
2021-08-13Add Event controlsChong Cai
Add Event controls and implement "stream" commands. PiperOrigin-RevId: 390691702
2021-04-16Allow runsc to generate coverage reports.Dean Deng
Add a coverage-report flag that will cause the sandbox to generate a coverage report (with suffix .cov) in the debug log directory upon exiting. For the report to be generated, runsc must have been built with the following Bazel flags: `--collect_code_coverage --instrumentation_filter=...`. With coverage reports, we should be able to aggregate results across all tests to surface code coverage statistics for the project as a whole. The report is simply a text file with each line representing a covered block as `file:start_line.start_col,end_line.end_col`. Note that this is similar to the format of coverage reports generated with `go test -coverprofile`, although we omit the count and number of statements, which are not useful for us. Some simple ways of getting coverage reports: bazel test <some_test> --collect_code_coverage \ --instrumentation_filter=//pkg/... bazel build //runsc --collect_code_coverage \ --instrumentation_filter=//pkg/... runsc -coverage-report=dir/ <other_flags> do ... PiperOrigin-RevId: 368952911
2020-08-19Move boot.Config to its own packageFabricio Voznika
Updates #3494 PiperOrigin-RevId: 327548511
2020-07-13Merge pull request #2672 from amscanne:shim-integratedgVisor bot
PiperOrigin-RevId: 321053634
2020-05-28Move Cleanup to its own packageFabricio Voznika
PiperOrigin-RevId: 313663382
2020-01-27Standardize on tools directory.Adin Scannell
PiperOrigin-RevId: 291745021
2020-01-09New sync package.Ian Gudger
* Rename syncutil to sync. * Add aliases to sync types. * Replace existing usage of standard library sync package. This will make it easier to swap out synchronization primitives. For example, this will allow us to use primitives from github.com/sasha-s/go-deadlock to check for lock ordering violations. Updates #1472 PiperOrigin-RevId: 289033387
2019-12-11Enable IPv6 in runscBhasker Hariharan
Fixes #1341 PiperOrigin-RevId: 285108973
2019-10-22netstack/tcp: software segmentation offloadAndrei Vagin
Right now, we send each tcp packet separately, we call one system call per-packet. This patch allows to generate multiple tcp packets and send them by sendmmsg. The arguable part of this CL is a way how to handle multiple headers. This CL adds the next field to the Prepandable buffer. Nginx test results: Server Software: nginx/1.15.9 Server Hostname: 10.138.0.2 Server Port: 8080 Document Path: /10m.txt Document Length: 10485760 bytes w/o gso: Concurrency Level: 5 Time taken for tests: 5.491 seconds Complete requests: 100 Failed requests: 0 Total transferred: 1048600200 bytes HTML transferred: 1048576000 bytes Requests per second: 18.21 [#/sec] (mean) Time per request: 274.525 [ms] (mean) Time per request: 54.905 [ms] (mean, across all concurrent requests) Transfer rate: 186508.03 [Kbytes/sec] received sw-gso: Concurrency Level: 5 Time taken for tests: 3.852 seconds Complete requests: 100 Failed requests: 0 Total transferred: 1048600200 bytes HTML transferred: 1048576000 bytes Requests per second: 25.96 [#/sec] (mean) Time per request: 192.576 [ms] (mean) Time per request: 38.515 [ms] (mean, across all concurrent requests) Transfer rate: 265874.92 [Kbytes/sec] received w/o gso: $ ./tcp_benchmark --client --duration 15 --ideal [SUM] 0.0-15.1 sec 2.20 GBytes 1.25 Gbits/sec software gso: $ tcp_benchmark --client --duration 15 --ideal --gso $((1<<16)) --swgso [SUM] 0.0-15.1 sec 3.99 GBytes 2.26 Gbits/sec PiperOrigin-RevId: 276112677
2019-07-03Avoid importing platforms from many source filesAndrei Vagin
PiperOrigin-RevId: 256494243
2019-06-13Update canonical repository.Adin Scannell
This can be merged after: https://github.com/google/gvisor-website/pull/77 or https://github.com/google/gvisor-website/pull/78 PiperOrigin-RevId: 253132620
2019-03-29gvisor/runsc: enable generic segmentation offload (GSO)Andrei Vagin
The linux packet socket can handle GSO packets, so we can segment packets to 64K instead of the MTU which is usually 1500. Here are numbers for the nginx-1m test: runsc: 579330.01 [Kbytes/sec] received runsc-gso: 1794121.66 [Kbytes/sec] received runc: 2122139.06 [Kbytes/sec] received and for tcp_benchmark: $ tcp_benchmark --duration 15 --ideal [ 4] 0.0-15.0 sec 86647 MBytes 48456 Mbits/sec $ tcp_benchmark --client --duration 15 --ideal [ 4] 0.0-15.0 sec 2173 MBytes 1214 Mbits/sec $ tcp_benchmark --client --duration 15 --ideal --gso 65536 [ 4] 0.0-15.0 sec 19357 MBytes 10825 Mbits/sec PiperOrigin-RevId: 241072403 Change-Id: I20b03063a1a6649362b43609cbbc9b59be06e6d5
2019-01-31Remove license commentsMichael Pratt
Nothing reads them and they can simply get stale. Generated with: $ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD PiperOrigin-RevId: 231818945 Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0
2019-01-14runsc: set up a minimal chroot from the sandbox processAndrei Vagin
In this case, new mounts are not created in the host mount namspaces, so tearDownChroot isn't needed, because chroot will be destroyed with a sandbox mount namespace. In additional, pivot_root can't be called instead of chroot. PiperOrigin-RevId: 229250871 Change-Id: I765bdb587d0b8287a6a8efda8747639d37c7e7b6
2018-10-23Track paths and provide a rename hook.Adin Scannell
This change also adds extensive testing to the p9 package via mocks. The sanity checks and type checks are moved from the gofer into the core package, where they can be more easily validated. PiperOrigin-RevId: 218296768 Change-Id: I4fc3c326e7bf1e0e140a454cbacbcc6fd617ab55
2018-10-10Add sandbox to cgroupFabricio Voznika
Sandbox creation uses the limits and reservations configured in the OCI spec and set cgroup options accordinly. Then it puts both the sandbox and gofer processes inside the cgroup. It also allows the cgroup to be pre-configured by the caller. If the cgroup already exists, sandbox and gofer processes will join the cgroup but it will not modify the cgroup with spec limits. PiperOrigin-RevId: 216538209 Change-Id: If2c65ffedf55820baab743a0edcfb091b89c1019
2018-09-28Switch to root in userns when CAP_SYS_CHROOT is also missingFabricio Voznika
Some tests check current capabilities and re-run the tests as root inside userns if required capabibilities are missing. It was checking for CAP_SYS_ADMIN only, CAP_SYS_CHROOT is also required now. PiperOrigin-RevId: 214949226 Change-Id: Ic81363969fa76c04da408fae8ea7520653266312
2018-09-13runsc: Support container signal/wait.Lantao Liu
This CL: 1) Fix `runsc wait`, it now also works after the container exits; 2) Generate correct container state in Load; 2) Make sure `Destory` cleanup everything before successfully return. PiperOrigin-RevId: 212900107 Change-Id: Ie129cbb9d74f8151a18364f1fc0b2603eac4109a
2018-09-11platform: Pass device fd into platform constructor.Nicolas Lacasse
We were previously openining the platform device (i.e. /dev/kvm) inside the platfrom constructor (i.e. kvm.New). This requires that we have RW access to the platform device when constructing the platform. However, now that the runsc sandbox process runs as user "nobody", it is not able to open the platform device. This CL changes the kvm constructor to take the platform device FD, rather than opening the device file itself. The device file is opened outside of the sandbox and passed to the sandbox process. PiperOrigin-RevId: 212505804 Change-Id: I427e1d9de5eb84c84f19d513356e1bb148a52910
2018-09-07runsc: Run sandbox process inside minimal chroot.Nicolas Lacasse
We construct a dir with the executable bind-mounted at /exe, and proc mounted at /proc. Runsc now executes the sandbox process inside this chroot, thus limiting access to the host filesystem. The mounts and chroot dir are removed when the sandbox is destroyed. Because this requires bind-mounts, we can only do the chroot if we have CAP_SYS_ADMIN. PiperOrigin-RevId: 211994001 Change-Id: Ia71c515e26085e0b69b833e71691830148bc70d1
2018-08-27Put fsgofer inside chrootFabricio Voznika
Now each container gets its own dedicated gofer that is chroot'd to the rootfs path. This is done to add an extra layer of security in case the gofer gets compromised. PiperOrigin-RevId: 210396476 Change-Id: Iba21360a59dfe90875d61000db103f8609157ca0
2018-08-24runsc: Terminal support for "docker exec -ti".Nicolas Lacasse
This CL adds terminal support for "docker exec". We previously only supported consoles for the container process, but not exec processes. The SYS_IOCTL syscall was added to the default seccomp filter list, but only for ioctls that get/set winsize and termios structs. We need to allow these ioctl for all containers because it's possible to run "exec -ti" on a container that was started without an attached console, after the filters have been installed. Note that control-character signals are still not properly supported. Tested with: $ docker run --runtime=runsc -it alpine In another terminial: $ docker exec -it <containerid> /bin/sh PiperOrigin-RevId: 210185456 Change-Id: I6d2401e53a7697bb988c120a8961505c335f96d9
2018-08-21Initial change for multi-gofer supportFabricio Voznika
PiperOrigin-RevId: 209647293 Change-Id: I980fca1257ea3fcce796388a049c353b0303a8a5
2018-08-15runsc fsgofer: Support dynamic serving of filesystems.Kevin Krakauer
When multiple containers run inside a sentry, each container has its own root filesystem and set of mounts. Containers are also added after sentry boot rather than all configured and known at boot time. The fsgofer needs to be able to serve the root filesystem of each container. Thus, it must be possible to add filesystems after the fsgofer has already started. This change: * Creates a URPC endpoint within the gofer process that listens for requests to serve new content. * Enables the sentry, when starting a new container, to add the new container's filesystem. * Mounts those new filesystems at separate roots within the sentry. PiperOrigin-RevId: 208903248 Change-Id: Ifa91ec9c8caf5f2f0a9eead83c4a57090ce92068
2018-06-04Fix leaky FDFabricio Voznika
9P socket was being created without CLOEXEC and was being inherited by the children. This would prevent the gofer from detecting that the sandbox had exited, because the socket would not be closed. PiperOrigin-RevId: 199168959 Change-Id: I3ee1a07cbe7331b0aeb1cf2b697e728ce24f85a7
2018-05-15Refactor the Sandbox package into Sandbox + Container.Nicolas Lacasse
This is a necessary prerequisite for supporting multiple containers in a single sandbox. All the commands (in cmd package) now call operations on Containers (container package). When a Container first starts, it will create a Sandbox with the same ID. The Sandbox class is now simpler, as it only knows how to create boot/gofer processes, and how to forward commands into the running boot process. There are TODOs sprinkled around for additional support for multiple containers. Most notably, we need to detect when a container is intended to run in an existing sandbox (by reading the metadata), and then have some way to signal to the sandbox to start a new container. Other urpc calls into the sandbox need to pass the container ID, so the sandbox can run the operation on the given container. These are only half-plummed through right now. PiperOrigin-RevId: 196688269 Change-Id: I1ecf4abbb9dd8987a53ae509df19341aaf42b5b0
2018-04-28Check in gVisor.Googler
PiperOrigin-RevId: 194583126 Change-Id: Ica1d8821a90f74e7e745962d71801c598c652463
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 09:12:48 +0000