| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This was causing gvisor-containerd-shim to crash because the command
suceeded, but there was no stat present.
PiperOrigin-RevId: 340964921
|
|
|
|
When OOM score adjustment needs to be set, all the containers need to be
loaded to find all containers that belong to the sandbox. However, each
load signals the container to ensure it is still alive. OOM score
adjustment is set during creation and deletion of every container, generating
a flood of signals to all containers. The fix removes the signal check
when it's not needed.
There is also a race fetching OOM score adjustment value from the parent when
the sandbox exits at the same time (the time it took to signal containers above
made this window quite large). The fix is to store the original value
in the sandbox state file and use it when the value needs to be restored.
Also add more logging and made the existing ones more consistent to help with
debugging.
PiperOrigin-RevId: 340940799
|
|
|
|
PiperOrigin-RevId: 338372736
|
|
|
|
|
|
There were a few problems with cgroups:
- cleanup loop what breaking too early
- parse of /proc/[pid]/cgroups was skipping "name=systemd"
because "name=" was not being removed from name.
- When no limits are specified, fillFromAncestor was not being
called, causing a failure to set cpuset.mems
Updates #4536
PiperOrigin-RevId: 337947356
|
|
|
|
When all container tasks finish, they release the mount which in turn
will close the 9P session to the gofer. The gofer exits when the connection
closes, triggering the gofer monitor. The gofer monitor will _think_ that
the gofer died prematurely and destroy the container. Then when the caller
attempts to wait for the container, e.g. to get the exit code, wait fails
saying the container doesn't exist.
Gofer monitor now just SIGKILLs the container, and let the normal teardown
process to happen, which will evetually destroy the container at the right
time. Also, fixed an issue with exec racing with container's init process
exiting.
Closes #1487
PiperOrigin-RevId: 335537350
|
|
Updates #1487
PiperOrigin-RevId: 335516732
|
|
|
|
based on arch, apply different syscall number for
sched_rr_get_interval
Signed-off-by: Howard Zhang <howard.zhang@arm.com>
|
|
|
|
|
|
|
|
Gofer panics are suppressed by p9 server and an error
is returned to the caller, making it effectively the
same as returning EROFS.
PiperOrigin-RevId: 332282959
|
|
All tests under runsc are passing with overlay enabled.
Updates #1487, #1199
PiperOrigin-RevId: 332181267
|
|
ptrace was always selected as a dimension before, but not
anymore. Some tests were specifying "overlay" expecting that
to be in addition to the default.
PiperOrigin-RevId: 332004111
|
|
Useful when you want to run multiple containers with the same config.
And runc does that too.
|
|
Updates #1487
PiperOrigin-RevId: 330580699
|
|
VFS1 and VFS2 host FDs have different dupping behavior,
making error prone to code for both. Change the contract
so that FDs are released as they are used, so the caller
can simple defer a block that closes all remaining files.
This also addresses handling of partial failures.
With this fix, more VFS2 tests can be enabled.
Updates #1487
PiperOrigin-RevId: 330112266
|
|
Updates #2972
PiperOrigin-RevId: 329584905
|
|
|
|
Updates #3494
PiperOrigin-RevId: 327548511
|
|
The bazel server was being started as the wrong user, leading to issues
where the container would suddenly exit during a build.
We can also simplify the waiting logic by starting the container in two
separate steps: those that must complete first, then the asynchronous bit.
PiperOrigin-RevId: 323391161
|
|
|
|
PiperOrigin-RevId: 321449877
|
|
Much like the boot process, apply pdeathsig to the gofer for cases where
the sandbox lifecycle is attached to the parent (runsc run/do).
This isn't strictly necessary, as the gofer normally exits once the
sentry disappears, but this makes that extra reliable.
|
|
- Combine process creation code that is shared between
root and subcontainer processes
- Move root container information into a struct for
clarity
Updates #2714
PiperOrigin-RevId: 321204798
|
|
PiperOrigin-RevId: 321053634
|
|
Container restart test is disabled for VFS2 for now.
Updates #1487
PiperOrigin-RevId: 320296401
|
|
Fixes #701
PiperOrigin-RevId: 316025635
|
|
Run vs. exec, VFS1 vs. VFS2 were executable lookup were
slightly different from each other. Combine them all
into the same logic.
PiperOrigin-RevId: 315426443
|
|
- Add /tmp handling
- Apply mount options
- Enable more container_test tests
- Forward signals to child process when test respaws process
to run as root inside namespace.
Updates #1487
PiperOrigin-RevId: 314263281
|
|
|
|
PiperOrigin-RevId: 313663382
|
|
PiperOrigin-RevId: 313636920
|
|
|
|
PiperOrigin-RevId: 312104899
|
|
Linux 4.18 and later make reads and writes coherent between pre-copy-up and
post-copy-up FDs representing the same file on an overlay filesystem. However,
memory mappings remain incoherent:
- Documentation/filesystems/overlayfs.rst, "Non-standard behavior": "If a file
residing on a lower layer is opened for read-only and then memory mapped with
MAP_SHARED, then subsequent changes to the file are not reflected in the
memory mapping."
- fs/overlay/file.c:ovl_mmap() passes through to the underlying FD without any
management of coherence in the overlay.
- Experimentally on Linux 5.2:
```
$ cat mmap_cat_page.c
#include <err.h>
#include <fcntl.h>
#include <stdio.h>
#include <string.h>
#include <sys/mman.h>
#include <unistd.h>
int main(int argc, char **argv) {
if (argc < 2) {
errx(1, "syntax: %s [FILE]", argv[0]);
}
const int fd = open(argv[1], O_RDONLY);
if (fd < 0) {
err(1, "open(%s)", argv[1]);
}
const size_t page_size = sysconf(_SC_PAGE_SIZE);
void* page = mmap(NULL, page_size, PROT_READ, MAP_SHARED, fd, 0);
if (page == MAP_FAILED) {
err(1, "mmap");
}
for (;;) {
write(1, page, strnlen(page, page_size));
if (getc(stdin) == EOF) {
break;
}
}
return 0;
}
$ gcc -O2 -o mmap_cat_page mmap_cat_page.c
$ mkdir lowerdir upperdir workdir overlaydir
$ echo old > lowerdir/file
$ sudo mount -t overlay -o "lowerdir=lowerdir,upperdir=upperdir,workdir=workdir" none overlaydir
$ ./mmap_cat_page overlaydir/file
old
^Z
[1]+ Stopped ./mmap_cat_page overlaydir/file
$ echo new > overlaydir/file
$ cat overlaydir/file
new
$ fg
./mmap_cat_page overlaydir/file
old
```
Therefore, while the VFS1 gofer client's behavior of reopening read FDs is only
necessary pre-4.18, replacing existing memory mappings (in both sentry and
application address spaces) with mappings of the new FD is required regardless
of kernel version, and this latter behavior is common to both VFS1 and VFS2.
Re-document accordingly, and change the runsc flag to enabled by default.
New test:
- Before this CL: https://source.cloud.google.com/results/invocations/5b222d2c-e918-4bae-afc4-407f5bac509b
- After this CL: https://source.cloud.google.com/results/invocations/f28c747e-d89c-4d8c-a461-602b33e71aab
PiperOrigin-RevId: 311361267
|
|
Also added back the default test dimension back which was
dropped in a previous refactor.
PiperOrigin-RevId: 309797327
|
|
Updates #1623, #1487
PiperOrigin-RevId: 309777922
|
|
PiperOrigin-RevId: 309082540
|
|
|
|
PiperOrigin-RevId: 308829800
|
|
|
|
Use the sighandling package for Container.ForwardSignals, for
consistency with other signal forwarding.
Fixes #2546
|
|
typo, should be `start` in comments
|
