| Age | Commit message (Collapse) | Author |
|---|
|
This allows to find all containers inside a sandbox more efficiently.
This operation is required every time a container starts and stops,
and previously required loading *all* container state files to check
whether the container belonged to the sandbox.
Apert from being inneficient, it has caused problems when state files
are stale or corrupt, causing inavalability to create any container.
Also adjust commands `list` and `debug` to skip over files that fail
to load.
Resolves #5052
PiperOrigin-RevId: 348050637
|
|
Due to a type doDestroyNotStartedTest was being tested
2x instead of doDestroyStartingTest.
PiperOrigin-RevId: 340969797
|
|
When OOM score adjustment needs to be set, all the containers need to be
loaded to find all containers that belong to the sandbox. However, each
load signals the container to ensure it is still alive. OOM score
adjustment is set during creation and deletion of every container, generating
a flood of signals to all containers. The fix removes the signal check
when it's not needed.
There is also a race fetching OOM score adjustment value from the parent when
the sandbox exits at the same time (the time it took to signal containers above
made this window quite large). The fix is to store the original value
in the sandbox state file and use it when the value needs to be restored.
Also add more logging and made the existing ones more consistent to help with
debugging.
PiperOrigin-RevId: 340940799
|
|
There were a few problems with cgroups:
- cleanup loop what breaking too early
- parse of /proc/[pid]/cgroups was skipping "name=systemd"
because "name=" was not being removed from name.
- When no limits are specified, fillFromAncestor was not being
called, causing a failure to set cpuset.mems
Updates #4536
PiperOrigin-RevId: 337947356
|
|
Updates #1487
PiperOrigin-RevId: 335516732
|
|
based on arch, apply different syscall number for
sched_rr_get_interval
Signed-off-by: Howard Zhang <howard.zhang@arm.com>
|
|
All tests under runsc are passing with overlay enabled.
Updates #1487, #1199
PiperOrigin-RevId: 332181267
|
|
ptrace was always selected as a dimension before, but not
anymore. Some tests were specifying "overlay" expecting that
to be in addition to the default.
PiperOrigin-RevId: 332004111
|
|
Updates #1487
PiperOrigin-RevId: 330580699
|
|
Updates #3494
PiperOrigin-RevId: 327548511
|
|
The bazel server was being started as the wrong user, leading to issues
where the container would suddenly exit during a build.
We can also simplify the waiting logic by starting the container in two
separate steps: those that must complete first, then the asynchronous bit.
PiperOrigin-RevId: 323391161
|
|
Run vs. exec, VFS1 vs. VFS2 were executable lookup were
slightly different from each other. Combine them all
into the same logic.
PiperOrigin-RevId: 315426443
|
|
- Add /tmp handling
- Apply mount options
- Enable more container_test tests
- Forward signals to child process when test respaws process
to run as root inside namespace.
Updates #1487
PiperOrigin-RevId: 314263281
|
|
PiperOrigin-RevId: 313636920
|
|
PiperOrigin-RevId: 312104899
|
|
Linux 4.18 and later make reads and writes coherent between pre-copy-up and
post-copy-up FDs representing the same file on an overlay filesystem. However,
memory mappings remain incoherent:
- Documentation/filesystems/overlayfs.rst, "Non-standard behavior": "If a file
residing on a lower layer is opened for read-only and then memory mapped with
MAP_SHARED, then subsequent changes to the file are not reflected in the
memory mapping."
- fs/overlay/file.c:ovl_mmap() passes through to the underlying FD without any
management of coherence in the overlay.
- Experimentally on Linux 5.2:
```
$ cat mmap_cat_page.c
#include <err.h>
#include <fcntl.h>
#include <stdio.h>
#include <string.h>
#include <sys/mman.h>
#include <unistd.h>
int main(int argc, char **argv) {
if (argc < 2) {
errx(1, "syntax: %s [FILE]", argv[0]);
}
const int fd = open(argv[1], O_RDONLY);
if (fd < 0) {
err(1, "open(%s)", argv[1]);
}
const size_t page_size = sysconf(_SC_PAGE_SIZE);
void* page = mmap(NULL, page_size, PROT_READ, MAP_SHARED, fd, 0);
if (page == MAP_FAILED) {
err(1, "mmap");
}
for (;;) {
write(1, page, strnlen(page, page_size));
if (getc(stdin) == EOF) {
break;
}
}
return 0;
}
$ gcc -O2 -o mmap_cat_page mmap_cat_page.c
$ mkdir lowerdir upperdir workdir overlaydir
$ echo old > lowerdir/file
$ sudo mount -t overlay -o "lowerdir=lowerdir,upperdir=upperdir,workdir=workdir" none overlaydir
$ ./mmap_cat_page overlaydir/file
old
^Z
[1]+ Stopped ./mmap_cat_page overlaydir/file
$ echo new > overlaydir/file
$ cat overlaydir/file
new
$ fg
./mmap_cat_page overlaydir/file
old
```
Therefore, while the VFS1 gofer client's behavior of reopening read FDs is only
necessary pre-4.18, replacing existing memory mappings (in both sentry and
application address spaces) with mappings of the new FD is required regardless
of kernel version, and this latter behavior is common to both VFS1 and VFS2.
Re-document accordingly, and change the runsc flag to enabled by default.
New test:
- Before this CL: https://source.cloud.google.com/results/invocations/5b222d2c-e918-4bae-afc4-407f5bac509b
- After this CL: https://source.cloud.google.com/results/invocations/f28c747e-d89c-4d8c-a461-602b33e71aab
PiperOrigin-RevId: 311361267
|
|
Also added back the default test dimension back which was
dropped in a previous refactor.
PiperOrigin-RevId: 309797327
|
|
Updates #1623, #1487
PiperOrigin-RevId: 309777922
|
|
PiperOrigin-RevId: 309082540
|
|
Signed-off-by: moricho <ikeda.morito@gmail.com>
|
|
Several tests are passing after getting TestAppExitStatus (run /bin/true)
changes. Make versions that run via VFS2 so that we know what is and isn't
working.
In addition, fix bug in VFSFile ReadFull. For the TestExePath test in
container_test.go, the case "unmasked" will return 0 bytes read with no
EOF err, causing the ReadFull call to spin.
PiperOrigin-RevId: 308428126
|
|
This change adds a layer of abstraction around the internal Docker APIs,
and eliminates all direct dependencies on Dockerfiles in the infrastructure.
A subsequent change will automated the generation of local images (with
efficient caching). Note that this change drops the use of bazel container
rules, as that experiment does not seem to be viable.
PiperOrigin-RevId: 308095430
|
|
This is to make easier to find corresponding logs in
case test fails.
PiperOrigin-RevId: 307104283
|
|
Included:
- loader_test.go RunTest and TestStartSignal VFS2
- container_test.go TestAppExitStatus on VFS2
- experimental flag added to runsc to turn on VFS2
Note: shared mounts are not yet supported.
PiperOrigin-RevId: 307070753
|
|
When the sandbox runs in attached more, e.g. runsc do, runsc run, the
sandbox lifetime is controlled by the parent process. This wasn't working
in all cases because PR_GET_PDEATHSIG doesn't propagate through execve
when the process changes uid/gid. So it was getting dropped when the
sandbox execve's to change to user nobody.
PiperOrigin-RevId: 300601247
|
|
A parser of test results doesn't expect to see any extra messages.
PiperOrigin-RevId: 299174138
|
|
TestMultiContainerKillAll timed out under --race. Without logging,
we cannot tell if the process list is still increasing, but slowly,
or is stuck.
PiperOrigin-RevId: 297158834
|
|
Sometimes we get this error under TSAN:
"""
error getting process data from container: connecting to control server at PID
XXXX: connection refused
"""
The theory is that the top "sleep 20" was too short for TSAN, and the container
already exited, so we get connected refused. This commit changes the test to
let container signaling it's running by touching a file repeatedly forever
during the test.
PiperOrigin-RevId: 293710957
|
|
* Rename syncutil to sync.
* Add aliases to sync types.
* Replace existing usage of standard library sync package.
This will make it easier to swap out synchronization primitives. For example,
this will allow us to use primitives from github.com/sasha-s/go-deadlock to
check for lock ordering violations.
Updates #1472
PiperOrigin-RevId: 289033387
|
|
It can take more than 10 seconds when running under --race.
PiperOrigin-RevId: 286296060
|
|
runsc debug --ps list all processes with all threads. This option is added to
the debug command but not to the ps command, because it is going to be used for
debug purposes and we want to add any useful information without thinking about
backward compatibility.
This will help to investigate syzkaller issues.
PiperOrigin-RevId: 285013668
|
|
Threadgroups already know their TTY (if they have one), which now contains the
TTY Index, and is returned in the Processes() call.
PiperOrigin-RevId: 284263850
|
|
container.startContainers() cannot be called twice in a test
(e.g. TestMultiContainerLoadSandbox) because the cleanup
function deletes the rootDir, together with information from
all other containers that may exist.
PiperOrigin-RevId: 276591806
|
|
Linux kernel before 4.19 doesn't implement a feature that updates
open FD after a file is open for write (and is copied to the upper
layer). Already open FD will continue to read the old file content
until they are reopened. This is especially problematic for gVisor
because it caches open files.
Flag was added to force readonly files to be reopenned when the
same file is open for write. This is only needed if using kernels
prior to 4.19.
Closes #1006
It's difficult to really test this because we never run on tests
on older kernels. I'm adding a test in GKE which uses kernels
with the overlayfs problem for 1.14 and lower.
PiperOrigin-RevId: 275115289
|
|
'docker exec' was getting CAP_NET_RAW even when --net-raw=false
because it was not filtered out from when copying container's
capabilities.
PiperOrigin-RevId: 272260451
|
|
The simple test script has gotten out of control. Shard this script into
different pieces and attempt to impose order on overall test structure. This
change helps lay some of the foundations for future improvements.
* The runsc/test directories are moved into just test/.
* The runsc/test/testutil package is split into logical pieces.
* The scripts/ directory contains new top-level targets.
* Each test is now responsible for building targets it requires.
* The install functionality is moved into `runsc` itself for simplicity.
* The existing kokoro run_tests.sh file now just calls all (can be split).
After this change is merged, I will create multiple distinct workflows for
Kokoro, one for each of the scripts currently targeted by `run_tests.sh` today,
which should dramatically reduce the time-to-run for the Kokoro tests, and
provides a better foundation for further improvements to the infrastructure.
PiperOrigin-RevId: 267081397
|
|
This used to be the case, but regressed after a recent change.
Also made a few fixes around it and clean up the code a bit.
Closes #720
PiperOrigin-RevId: 265717496
|
|
Each gofer now has a goroutine that polls on the FDs used
to communicate with the sandbox. The respective gofer is
destroyed if any of the FDs is closed.
Closes #601
PiperOrigin-RevId: 261383725
|
|
The different containers in a sandbox used only one pid
namespace before. This results in that a container can see
the processes in another container in the same sandbox.
This patch use different pid namespace for different containers.
Signed-off-by: chris.zn <chris.zn@antfin.com>
|
|
PiperOrigin-RevId: 257037608
|
|
PiperOrigin-RevId: 256494243
|
|
Addresses obvious typos, in the documentation only.
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/443 from Pixep:fix/documentation-spelling 4d0688164eafaf0b3010e5f4824b35d1e7176d65
PiperOrigin-RevId: 255477779
|
|
PiperOrigin-RevId: 253882115
|
|
There were 3 string arguments that could be easily misplaced
and it makes it easier to add new arguments, especially for
Container that has dozens of callers.
PiperOrigin-RevId: 253872074
|
|
This can be merged after:
https://github.com/google/gvisor-website/pull/77
or
https://github.com/google/gvisor-website/pull/78
PiperOrigin-RevId: 253132620
|
|
'--rootless' flag lets a non-root user execute 'runsc do'.
The drawback is that the sandbox and gofer processes will
run as root inside a user namespace that is mapped to the
caller's user, intead of nobody. And network is defaulted
to '--network=host' inside the root network namespace. On
the bright side, it's very convenient for testing:
runsc --rootless do ls
runsc --rootless do curl www.google.com
PiperOrigin-RevId: 252840970
|
|
clearStatus was added to allow detached execution to wait
on the exec'd process and retrieve its exit status. However,
it's not currently used. Both docker and gvisor-containerd-shim
wait on the "shim" process and retrieve the exit status from
there. We could change gvisor-containerd-shim to use waits, but
it will end up also consuming a process for the wait, which is
similar to having the shim process.
Closes #234
PiperOrigin-RevId: 251349490
|
|
Change-Id: I02b30de13f1393df66edf8829fedbf32405d18f8
PiperOrigin-RevId: 246621192
|
|
Opensource tools (e. g. https://github.com/fatih/vim-go) can't hanlde more than
one golang package in one directory.
PiperOrigin-RevId: 246435962
Change-Id: I67487915e3838762424b2d168efc54ae34fb801f
|
|
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes #209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
|
