summaryrefslogtreecommitdiffhomepage
path: root/runsc/container/container.go
AgeCommit message (Collapse)Author
2021-03-30Fix panic when overriding /dev files with VFS2Fabricio Voznika
VFS1 skips over mounts that overrides files in /dev because the list of files is hardcoded. This is not needed for VFS2 and a recent change lifted this restriction. However, parts of the code were still skipping /dev mounts even in VFS2, causing the loader to panic when it ran short of FDs to connect to the gofer. PiperOrigin-RevId: 365858436
2021-03-06[op] Replace syscall package usage with golang.org/x/sys/unix in runsc/.Ayush Ranjan
The syscall package has been deprecated in favor of golang.org/x/sys. Note that syscall is still used in some places because the following don't seem to have an equivalent in unix package: - syscall.SysProcIDMap - syscall.Credential Updates #214 PiperOrigin-RevId: 361381490
2021-02-22Return nicer error message when cgroups v1 isn't availableFabricio Voznika
Updates #3481 Closes #5430 PiperOrigin-RevId: 358923208
2021-02-02Stub out basic `runsc events --stat` CPU functionalityKevin Krakauer
Because we lack gVisor-internal cgroups, we take the CPU usage of the entire pod and divide it proportionally according to sentry-internal usage stats. This fixes `kubectl top pods`, which gets a pod's CPU usage by summing the usage of its containers. Addresses #172. PiperOrigin-RevId: 355229833
2021-01-12Fix simple mistakes identified by goreportcard.Adin Scannell
These are primarily simplification and lint mistakes. However, minor fixes are also included and tests added where appropriate. PiperOrigin-RevId: 351425971
2020-12-17Add sandbox ID to state file nameFabricio Voznika
This allows to find all containers inside a sandbox more efficiently. This operation is required every time a container starts and stops, and previously required loading *all* container state files to check whether the container belonged to the sandbox. Apert from being inneficient, it has caused problems when state files are stale or corrupt, causing inavalability to create any container. Also adjust commands `list` and `debug` to skip over files that fail to load. Resolves #5052 PiperOrigin-RevId: 348050637
2020-11-18Fix race condition in multi-container wait testFabricio Voznika
Container is not thread-safe, locking must be done in the caller. The test was calling Container.Wait() from multiple threads with no synchronization. Also removed Container.WaitPID from test because the process might have already existed when wait is called. PiperOrigin-RevId: 343176280
2020-11-17Add support for TTY in multi-containerFabricio Voznika
Fixes #2714 PiperOrigin-RevId: 342950412
2020-11-05Return failure when `runsc events` queries a stopped containerFabricio Voznika
This was causing gvisor-containerd-shim to crash because the command suceeded, but there was no stat present. PiperOrigin-RevId: 340964921
2020-11-05Fix failure setting OOM score adjustmentFabricio Voznika
When OOM score adjustment needs to be set, all the containers need to be loaded to find all containers that belong to the sandbox. However, each load signals the container to ensure it is still alive. OOM score adjustment is set during creation and deletion of every container, generating a flood of signals to all containers. The fix removes the signal check when it's not needed. There is also a race fetching OOM score adjustment value from the parent when the sandbox exits at the same time (the time it took to signal containers above made this window quite large). The fix is to store the original value in the sandbox state file and use it when the value needs to be restored. Also add more logging and made the existing ones more consistent to help with debugging. PiperOrigin-RevId: 340940799
2020-10-21Merge pull request #3957 from workato:auto-cgroupgVisor bot
PiperOrigin-RevId: 338372736
2020-10-20Do not even try forcing cgroups in testsKonstantin Baranov
2020-10-19Fixes to cgroupsFabricio Voznika
There were a few problems with cgroups: - cleanup loop what breaking too early - parse of /proc/[pid]/cgroups was skipping "name=systemd" because "name=" was not being removed from name. - When no limits are specified, fillFromAncestor was not being called, causing a failure to set cpuset.mems Updates #4536 PiperOrigin-RevId: 337947356
2020-10-06Ignore errors in rootless and test modesKonstantin Baranov
2020-10-02Treat absent "linux" section is empty "cgroupsPath" tooKonstantin Baranov
2020-09-17Remove option to panic goferFabricio Voznika
Gofer panics are suppressed by p9 server and an error is returned to the caller, making it effectively the same as returning EROFS. PiperOrigin-RevId: 332282959
2020-09-15Use container ID as cgroup name if not providedKonstantin Baranov
Useful when you want to run multiple containers with the same config. And runc does that too.
2020-08-19Move boot.Config to its own packageFabricio Voznika
Updates #3494 PiperOrigin-RevId: 327548511
2020-07-15Apply pdeathsig to gofer for runsc run/doMichael Pratt
Much like the boot process, apply pdeathsig to the gofer for cases where the sandbox lifecycle is attached to the parent (runsc run/do). This isn't strictly necessary, as the gofer normally exits once the sentry disappears, but this makes that extra reliable.
2020-05-28Move Cleanup to its own packageFabricio Voznika
PiperOrigin-RevId: 313663382
2020-04-28Merge pull request #2558 from prattmic:forward_signalgVisor bot
PiperOrigin-RevId: 308829800
2020-04-27container: use sighandling packageMichael Pratt
Use the sighandling package for Container.ForwardSignals, for consistency with other signal forwarding. Fixes #2546
2020-04-27Update container.gokevin.xu
typo, should be `start` in comments
2020-04-23Simplify Docker test infrastructure.Adin Scannell
This change adds a layer of abstraction around the internal Docker APIs, and eliminates all direct dependencies on Dockerfiles in the infrastructure. A subsequent change will automated the generation of local images (with efficient caching). Note that this change drops the use of bazel container rules, as that experiment does not seem to be viable. PiperOrigin-RevId: 308095430
2020-04-07Update TODO to #238Ian Lewis
Move TODO to #238 so that proper synchronization of operations is handled when we create the urpc client. Issue #238 Fixes #512 PiperOrigin-RevId: 305383924
2020-02-27Log oom_score_adj value on errorFabricio Voznika
Updates #1873 PiperOrigin-RevId: 297695241
2019-10-30Fix container lockingFabricio Voznika
Sandbox root dir was not being saved with the Container state, so it would point to the wrong directory location when attempting to lock the sandbox. This led to race conditions saving and loading container state. Fixing it, led to multiple deadlocks. I've moved the saving and locking logic to a separate struct and moved the lock file inside the RootDir (instead of container root dir), which allows the lock to be taken inside Destroy, and removes the need to lock the sandbox. PiperOrigin-RevId: 277599612
2019-10-20Add runsc OCI annotations to support CRI-O.Tom Lanyon
Obligatory https://xkcd.com/927 Fixes #626
2019-09-16Bring back to life features lost in recent refactorFabricio Voznika
- Sandbox logs are generated when running tests - Kokoro uploads the sandbox logs - Supports multiple parallel runs - Revive script to install locally built runsc with docker PiperOrigin-RevId: 269337274
2019-09-05Ignore the root container when calculating oom_score_adj for the sandbox.Ian Lewis
This is done because the root container for CRI is the infrastructure (pause) container and always gets a low oom_score_adj. We do this to ensure that only the oom_score_adj of user containers is used to calculated the sandbox oom_score_adj. Implemented in runsc rather than the containerd shim as it's a bit cleaner to implement here (in the shim it would require overwriting the oomScoreAdj and re-writing out the config.json again). This processing is Kubernetes(CRI) specific but we are currently only supporting CRI for multi-container support anyway. PiperOrigin-RevId: 267507706
2019-08-07Set gofer's OOM score adjustmentFabricio Voznika
Updates #512 PiperOrigin-RevId: 262195448
2019-08-06Make loading container in a sandbox more robustFabricio Voznika
PiperOrigin-RevId: 262071646
2019-08-01Set sandbox oom_score_adjIan Lewis
Set /proc/self/oom_score_adj based on oomScoreAdj specified in the OCI bundle. When new containers are added to the sandbox oom_score_adj for the sandbox and all other gofers are adjusted so that oom_score_adj is equal to the lowest oom_score_adj of all containers in the sandbox. Fixes #512 PiperOrigin-RevId: 261242725
2019-06-27Fix various spelling issues in the documentationMichael Pratt
Addresses obvious typos, in the documentation only. COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/443 from Pixep:fix/documentation-spelling 4d0688164eafaf0b3010e5f4824b35d1e7176d65 PiperOrigin-RevId: 255477779
2019-06-18Kill sandbox process when 'runsc do' exitsFabricio Voznika
PiperOrigin-RevId: 253882115
2019-06-18Add Container/Sandbox args struct for creationFabricio Voznika
There were 3 string arguments that could be easily misplaced and it makes it easier to add new arguments, especially for Container that has dozens of callers. PiperOrigin-RevId: 253872074
2019-06-13Update canonical repository.Adin Scannell
This can be merged after: https://github.com/google/gvisor-website/pull/77 or https://github.com/google/gvisor-website/pull/78 PiperOrigin-RevId: 253132620
2019-06-03Remove 'clearStatus' option from container.Wait*PID()Fabricio Voznika
clearStatus was added to allow detached execution to wait on the exec'd process and retrieve its exit status. However, it's not currently used. Both docker and gvisor-containerd-shim wait on the "shim" process and retrieve the exit status from there. We could change gvisor-containerd-shim to use waits, but it will end up also consuming a process for the wait, which is similar to having the shim process. Closes #234 PiperOrigin-RevId: 251349490
2019-05-03Fix runsc restore to be compatible with docker start --checkpoint ...Andrei Vagin
Change-Id: I02b30de13f1393df66edf8829fedbf32405d18f8 PiperOrigin-RevId: 246621192
2019-05-02Add [simple] network support to 'runsc do'Fabricio Voznika
Sandbox always runsc with IP 192.168.10.2 and the peer network adds 1 to the address (192.168.10.3). Sandbox IP can be changed using --ip flag. Here a few examples: sudo runsc do curl www.google.com sudo runsc do --ip=10.10.10.2 bash -c "echo 123 | netcat -l -p 8080" PiperOrigin-RevId: 246421277 Change-Id: I7b3dce4af46a57300350dab41cb27e04e4b6e9da
2019-04-29Change copyright notice to "The gVisor Authors"Michael Pratt
Based on the guidelines at https://opensource.google.com/docs/releasing/authors/. 1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./' 2. Manual fixup of "Google Inc" references. 3. Add AUTHORS file. Authors may request to be added to this file. 4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS. Fixes #209 PiperOrigin-RevId: 245823212 Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
2019-04-29Allow and document bug ids in gVisor codebase.Nicolas Lacasse
PiperOrigin-RevId: 245818639 Change-Id: I03703ef0fb9b6675955637b9fe2776204c545789
2019-04-23Fix container_test flakes.Kevin Krakauer
Create, Start, and Destroy were racing to create and destroy the metadata directory of containers. This is a re-upload of https://gvisor-review.googlesource.com/c/gvisor/+/16260, but with the correct account. Change-Id: I16b7a9d0971f0df873e7f4145e6ac8f72730a4f1 PiperOrigin-RevId: 244892991
2019-04-09runsc: set UID and GID if gofer is executed in a new user namespaceAndrei Vagin
Otherwise, we will not have capabilities in the user namespace. And this patch adds the noexec option for mounts. https://github.com/google/gvisor/issues/145 PiperOrigin-RevId: 242706519 Change-Id: I1b78b77d6969bd18038c71616e8eb7111b71207c
2019-03-29Set container.CreatedAt in Create().Nicolas Lacasse
PiperOrigin-RevId: 241056805 Change-Id: I13ea8f5dbfb01ca02a3b0ab887b8c3bdf4d556a6
2019-03-18Add support for mount propagationFabricio Voznika
Properly handle propagation options for root and mounts. Now usage of mount options shared, rshared, and noexec cause error to start. shared/ rshared breaks sandbox=>host isolation. slave however can be supported because changes propagate from host to sandbox. Root FS setup moved inside the gofer. Apart from simplifying the code, it keeps all mounts inside the namespace. And they are torn down when the namespace is destroyed (DestroyFS is no longer needed). PiperOrigin-RevId: 239037661 Change-Id: I8b5ee4d50da33c042ea34fa68e56514ebe20e6e0
2019-02-25Fix cgroup when path is relativeFabricio Voznika
This can happen when 'docker run --cgroup-parent=' flag is set. PiperOrigin-RevId: 235645559 Change-Id: Ieea3ae66939abadab621053551bf7d62d412e7ee
2019-01-31gvisor/gofer: Use pivot_root instead of chrootAndrei Vagin
PiperOrigin-RevId: 231864273 Change-Id: I8545b72b615f5c2945df374b801b80be64ec3e13
2019-01-28runsc: Only uninstall cgroup for sandbox stop.Lantao Liu
PiperOrigin-RevId: 231263114 Change-Id: I57467a34fe94e395fdd3685462c4fe9776d040a3
2019-01-25Fix a nil pointer dereference bug in Container.Destroy()ShiruRen
In Container.Destroy(), we call c.stop() before calling executeHooksBestEffort(), therefore, when we call executeHooksBestEffort(c.Spec.Hooks.Poststop, c.State()) to execute the poststop hook, it results in a nil pointer dereference since it reads c.Sandbox.Pid in c.State() after the sandbox has been destroyed. To fix this bug, we can change container's status to "stopped" before executing the poststop hook. Signed-off-by: ShiruRen <renshiru2000@gmail.com> Change-Id: I4d835e430066fab7e599e188f945291adfc521ef PiperOrigin-RevId: 230975505
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 22:53:56 +0000