Age | Commit message (Collapse) | Author |
|
lisafs is only supported in VFS2. Added a runsc flag which enables lisafs.
When the flag is enabled, the gofer process and the client communicate using
lisafs protocol instead of 9P.
Added a filesystem option in fsimpl/gofer which indicates if lisafs is being
used. That will be used to gate lisafs on the gofer client.
Note that this change does not make the gofer client use lisafs just yet.
Updates #5465
PiperOrigin-RevId: 397917844
|
|
Add Event controls and implement "stream" commands.
PiperOrigin-RevId: 390691702
|
|
Add Usage controls and implement "usage/usagefd" commands.
PiperOrigin-RevId: 390507423
|
|
Add Fs controls and implement "cat" command.
PiperOrigin-RevId: 388812540
|
|
* First, we don't need to poll child processes.
* Second, the 5 seconds timeout is too small if a host is overloaded.
* Third, this can hide bugs in the code when we wait a process that
isn't going to exit.
PiperOrigin-RevId: 386337586
|
|
It was confusing to find functions relating to root and non-root
containers. Replace "non-root" and "subcontainer" and make naming
consistent in Sandbox and controller.
PiperOrigin-RevId: 384512518
|
|
Set stdio ownership based on the container's user to ensure the
user can open/read/write to/from stdios.
1. stdios in the host are changed to have the owner be the same
uid/gid of the process running the sandbox. This ensures that the
sandbox has full control over it.
2. stdios owner owner inside the sandbox is changed to match the
container's user to give access inside the container and make it
behave the same as runc.
Fixes #6180
PiperOrigin-RevId: 384347009
|
|
PiperOrigin-RevId: 384344990
|
|
When loading cgroups for another process, `/proc/self` was used in
a few places, causing the end state to be a mix of the process
and self. This is now fixes to always use the proper `/proc/[pid]`
path.
Added net_prio and net_cls to the list of optional controllers. This
is to allow runsc to execute then these cgroups are disabled as long
as there are no net_prio and net_cls limits that need to be applied.
Deflake TestMultiContainerEvent.
Closes #5875
Closes #5887
PiperOrigin-RevId: 372242687
|
|
VFS1 skips over mounts that overrides files in /dev because the list of
files is hardcoded. This is not needed for VFS2 and a recent change
lifted this restriction. However, parts of the code were still skipping
/dev mounts even in VFS2, causing the loader to panic when it ran short
of FDs to connect to the gofer.
PiperOrigin-RevId: 365858436
|
|
The syscall package has been deprecated in favor of golang.org/x/sys.
Note that syscall is still used in some places because the following don't seem
to have an equivalent in unix package:
- syscall.SysProcIDMap
- syscall.Credential
Updates #214
PiperOrigin-RevId: 361381490
|
|
Updates #3481
Closes #5430
PiperOrigin-RevId: 358923208
|
|
Because we lack gVisor-internal cgroups, we take the CPU usage of the entire pod
and divide it proportionally according to sentry-internal usage stats.
This fixes `kubectl top pods`, which gets a pod's CPU usage by summing the usage
of its containers.
Addresses #172.
PiperOrigin-RevId: 355229833
|
|
These are primarily simplification and lint mistakes. However, minor
fixes are also included and tests added where appropriate.
PiperOrigin-RevId: 351425971
|
|
This allows to find all containers inside a sandbox more efficiently.
This operation is required every time a container starts and stops,
and previously required loading *all* container state files to check
whether the container belonged to the sandbox.
Apert from being inneficient, it has caused problems when state files
are stale or corrupt, causing inavalability to create any container.
Also adjust commands `list` and `debug` to skip over files that fail
to load.
Resolves #5052
PiperOrigin-RevId: 348050637
|
|
Container is not thread-safe, locking must be done in the caller.
The test was calling Container.Wait() from multiple threads with
no synchronization.
Also removed Container.WaitPID from test because the process might
have already existed when wait is called.
PiperOrigin-RevId: 343176280
|
|
Fixes #2714
PiperOrigin-RevId: 342950412
|
|
This was causing gvisor-containerd-shim to crash because the command
suceeded, but there was no stat present.
PiperOrigin-RevId: 340964921
|
|
When OOM score adjustment needs to be set, all the containers need to be
loaded to find all containers that belong to the sandbox. However, each
load signals the container to ensure it is still alive. OOM score
adjustment is set during creation and deletion of every container, generating
a flood of signals to all containers. The fix removes the signal check
when it's not needed.
There is also a race fetching OOM score adjustment value from the parent when
the sandbox exits at the same time (the time it took to signal containers above
made this window quite large). The fix is to store the original value
in the sandbox state file and use it when the value needs to be restored.
Also add more logging and made the existing ones more consistent to help with
debugging.
PiperOrigin-RevId: 340940799
|
|
PiperOrigin-RevId: 338372736
|
|
|
|
There were a few problems with cgroups:
- cleanup loop what breaking too early
- parse of /proc/[pid]/cgroups was skipping "name=systemd"
because "name=" was not being removed from name.
- When no limits are specified, fillFromAncestor was not being
called, causing a failure to set cpuset.mems
Updates #4536
PiperOrigin-RevId: 337947356
|
|
|
|
|
|
Gofer panics are suppressed by p9 server and an error
is returned to the caller, making it effectively the
same as returning EROFS.
PiperOrigin-RevId: 332282959
|
|
Useful when you want to run multiple containers with the same config.
And runc does that too.
|
|
Updates #3494
PiperOrigin-RevId: 327548511
|
|
Much like the boot process, apply pdeathsig to the gofer for cases where
the sandbox lifecycle is attached to the parent (runsc run/do).
This isn't strictly necessary, as the gofer normally exits once the
sentry disappears, but this makes that extra reliable.
|
|
PiperOrigin-RevId: 313663382
|
|
PiperOrigin-RevId: 308829800
|
|
Use the sighandling package for Container.ForwardSignals, for
consistency with other signal forwarding.
Fixes #2546
|
|
typo, should be `start` in comments
|
|
This change adds a layer of abstraction around the internal Docker APIs,
and eliminates all direct dependencies on Dockerfiles in the infrastructure.
A subsequent change will automated the generation of local images (with
efficient caching). Note that this change drops the use of bazel container
rules, as that experiment does not seem to be viable.
PiperOrigin-RevId: 308095430
|
|
Move TODO to #238 so that proper synchronization of operations is handled
when we create the urpc client.
Issue #238
Fixes #512
PiperOrigin-RevId: 305383924
|
|
Updates #1873
PiperOrigin-RevId: 297695241
|
|
Sandbox root dir was not being saved with the Container state,
so it would point to the wrong directory location when attempting
to lock the sandbox. This led to race conditions saving and
loading container state. Fixing it, led to multiple deadlocks.
I've moved the saving and locking logic to a separate struct and
moved the lock file inside the RootDir (instead of container
root dir), which allows the lock to be taken inside Destroy,
and removes the need to lock the sandbox.
PiperOrigin-RevId: 277599612
|
|
Obligatory https://xkcd.com/927
Fixes #626
|
|
- Sandbox logs are generated when running tests
- Kokoro uploads the sandbox logs
- Supports multiple parallel runs
- Revive script to install locally built runsc with docker
PiperOrigin-RevId: 269337274
|
|
This is done because the root container for CRI is the infrastructure (pause)
container and always gets a low oom_score_adj. We do this to ensure that only
the oom_score_adj of user containers is used to calculated the sandbox
oom_score_adj.
Implemented in runsc rather than the containerd shim as it's a bit cleaner to
implement here (in the shim it would require overwriting the oomScoreAdj and
re-writing out the config.json again). This processing is Kubernetes(CRI)
specific but we are currently only supporting CRI for multi-container support
anyway.
PiperOrigin-RevId: 267507706
|
|
Updates #512
PiperOrigin-RevId: 262195448
|
|
PiperOrigin-RevId: 262071646
|
|
Set /proc/self/oom_score_adj based on oomScoreAdj specified in the OCI bundle.
When new containers are added to the sandbox oom_score_adj for the sandbox and
all other gofers are adjusted so that oom_score_adj is equal to the lowest
oom_score_adj of all containers in the sandbox.
Fixes #512
PiperOrigin-RevId: 261242725
|
|
Addresses obvious typos, in the documentation only.
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/443 from Pixep:fix/documentation-spelling 4d0688164eafaf0b3010e5f4824b35d1e7176d65
PiperOrigin-RevId: 255477779
|
|
PiperOrigin-RevId: 253882115
|
|
There were 3 string arguments that could be easily misplaced
and it makes it easier to add new arguments, especially for
Container that has dozens of callers.
PiperOrigin-RevId: 253872074
|
|
This can be merged after:
https://github.com/google/gvisor-website/pull/77
or
https://github.com/google/gvisor-website/pull/78
PiperOrigin-RevId: 253132620
|
|
clearStatus was added to allow detached execution to wait
on the exec'd process and retrieve its exit status. However,
it's not currently used. Both docker and gvisor-containerd-shim
wait on the "shim" process and retrieve the exit status from
there. We could change gvisor-containerd-shim to use waits, but
it will end up also consuming a process for the wait, which is
similar to having the shim process.
Closes #234
PiperOrigin-RevId: 251349490
|
|
Change-Id: I02b30de13f1393df66edf8829fedbf32405d18f8
PiperOrigin-RevId: 246621192
|
|
Sandbox always runsc with IP 192.168.10.2 and the peer
network adds 1 to the address (192.168.10.3). Sandbox
IP can be changed using --ip flag.
Here a few examples:
sudo runsc do curl www.google.com
sudo runsc do --ip=10.10.10.2 bash -c "echo 123 | netcat -l -p 8080"
PiperOrigin-RevId: 246421277
Change-Id: I7b3dce4af46a57300350dab41cb27e04e4b6e9da
|
|
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes #209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
|