summaryrefslogtreecommitdiffhomepage
path: root/runsc/cmd
AgeCommit message (Collapse)Author
2018-10-18Resolve mount paths while setting up root fs mountFabricio Voznika
It's hard to resolve symlinks inside the sandbox because rootfs and mounts may be read-only, forcing us to create mount points inside lower layer of an overlay, **before** the volumes are mounted. Since the destination must already be resolved outside the sandbox when creating mounts, take this opportunity to rewrite the spec with paths resolved. "runsc boot" will use the "resolved" spec to load mounts. In addition, symlink traversals were disabled while mounting containers inside the sandbox. It haven't been able to write a good test for it. So I'm relying on manual tests for now. PiperOrigin-RevId: 217749904 Change-Id: I7ac434d5befd230db1488446cda03300cc0751a9
2018-10-17runsc: Add --pid flag to runsc kill.Kevin Krakauer
--pid allows specific processes to be signalled rather than the container root process or all processes in the container. containerd needs to SIGKILL exec'd processes that timeout and check whether processes are still alive. PiperOrigin-RevId: 217547636 Change-Id: I2058ebb548b51c8eb748f5884fb88bad0b532e45
2018-10-12Added spec command to create OCI spec config.jsonIan Lewis
The spec command is analygous to the 'runc spec' command and allows for the convenient creation of a config.json file for users that don't have runc handy. Change-Id: Ifdfec37e023048ea461c32da1a9042a45b37d856 PiperOrigin-RevId: 216907826
2018-10-11Add bare bones unsupported syscall loggingFabricio Voznika
This change introduces a new flags to create/run called --user-log. Logs to this files are visible to users and are meant to help debugging problems with their images and containers. For now only unsupported syscalls are sent to this log, and only minimum support was added. We can build more infrastructure around it as needed. PiperOrigin-RevId: 216735977 Change-Id: I54427ca194604991c407d49943ab3680470de2d0
2018-10-10Add sandbox to cgroupFabricio Voznika
Sandbox creation uses the limits and reservations configured in the OCI spec and set cgroup options accordinly. Then it puts both the sandbox and gofer processes inside the cgroup. It also allows the cgroup to be pre-configured by the caller. If the cgroup already exists, sandbox and gofer processes will join the cgroup but it will not modify the cgroup with spec limits. PiperOrigin-RevId: 216538209 Change-Id: If2c65ffedf55820baab743a0edcfb091b89c1019
2018-10-09Add tests to verify gofer is chroot'edFabricio Voznika
PiperOrigin-RevId: 216472439 Change-Id: Ic4cb86c8e0a9cb022d3ceed9dc5615266c307cf9
2018-10-03runsc: Pass root container's stdio via FD.Nicolas Lacasse
We were previously using the sandbox process's stdio as the root container's stdio. This makes it difficult/impossible to distinguish output application output from sandbox output, such as panics, which are always written to stderr. Also close the console socket when we are done with it. PiperOrigin-RevId: 215585180 Change-Id: I980b8c69bd61a8b8e0a496fd7bc90a06446764e0
2018-10-01runsc: Support job control signals in "exec -it".Nicolas Lacasse
Terminal support in runsc relies on host tty file descriptors that are imported into the sandbox. Application tty ioctls are sent directly to the host fd. However, those host tty ioctls are associated in the host kernel with a host process (in this case runsc), and the host kernel intercepts job control characters like ^C and send signals to the host process. Thus, typing ^C into a "runsc exec" shell will send a SIGINT to the runsc process. This change makes "runsc exec" handle all signals, and forward them into the sandbox via the "ContainerSignal" urpc method. Since the "runsc exec" is associated with a particular container process in the sandbox, the signal must be associated with the same container process. One big difficulty is that the signal should not necessarily be sent to the sandbox process started by "exec", but instead must be sent to the foreground process group for the tty. For example, we may exec "bash", and from bash call "sleep 100". A ^C at this point should SIGINT sleep, not bash. To handle this, tty files inside the sandbox must keep track of their foreground process group, which is set/get via ioctls. When an incoming ContainerSignal urpc comes in, we look up the foreground process group via the tty file. Unfortunately, this means we have to expose and cache the tty file in the Loader. Note that "runsc exec" now handles signals properly, but "runs run" does not. That will come in a later CL, as this one is complex enough already. Example: root@:/usr/local/apache2# sleep 100 ^C root@:/usr/local/apache2# sleep 100 ^Z [1]+ Stopped sleep 100 root@:/usr/local/apache2# fg sleep 100 ^C root@:/usr/local/apache2# PiperOrigin-RevId: 215334554 Change-Id: I53cdce39653027908510a5ba8d08c49f9cf24f39
2018-09-30Removed duplicate/stale TODOsFabricio Voznika
PiperOrigin-RevId: 215162121 Change-Id: I35f06ac3235cf31c9e8a158dcf6261a7ded6c4c4
2018-09-28Make runsc kill and delete more conformant to the "spec"Fabricio Voznika
PiperOrigin-RevId: 214976251 Change-Id: I631348c3886f41f63d0e77e7c4f21b3ede2ab521
2018-09-28Switch to root in userns when CAP_SYS_CHROOT is also missingFabricio Voznika
Some tests check current capabilities and re-run the tests as root inside userns if required capabibilities are missing. It was checking for CAP_SYS_ADMIN only, CAP_SYS_CHROOT is also required now. PiperOrigin-RevId: 214949226 Change-Id: Ic81363969fa76c04da408fae8ea7520653266312
2018-09-27Implement 'runsc kill --all'Fabricio Voznika
In order to implement kill --all correctly, the Sentry needs to track all tasks that belong to a given container. This change introduces ContainerID to the task, that gets inherited by all children. 'kill --all' then iterates over all tasks comparing the ContainerID field to find all processes that need to be signalled. PiperOrigin-RevId: 214841768 Change-Id: I693b2374be8692d88cc441ef13a0ae34abf73ac6
2018-09-27Refactor 'runsc boot' to take container ID as argumentFabricio Voznika
This makes the flow slightly simpler (no need to call Loader.SetRootContainer). And this is required change to tag tasks with container ID inside the Sentry. PiperOrigin-RevId: 214795210 Change-Id: I6ff4af12e73bb07157f7058bb15fd5bb88760884
2018-09-26runsc: fix pid file race condition in exec detach mode.Lantao Liu
PiperOrigin-RevId: 214700295 Change-Id: I73d8490572eebe5da584af91914650d1953aeb91
2018-09-19Fix sandbox and gofer capabilitiesFabricio Voznika
Capabilities.Set() adds capabilities, but doesn't remove existing ones that might have been loaded. Fixed the code and added tests. PiperOrigin-RevId: 213726369 Change-Id: Id7fa6fce53abf26c29b13b9157bb4c6616986fba
2018-09-18Handle children processes better in testsFabricio Voznika
Reap children more systematically in container tests. Previously, container_test was taking ~5 mins to run because constainer.Destroy() would timeout waiting for the sandbox process to exit. Now the test running in less than a minute. Also made the contract around Container and Sandbox destroy clearer. PiperOrigin-RevId: 213527471 Change-Id: Icca84ee1212bbdcb62bdfc9cc7b71b12c6d1688d
2018-09-17runsc: Enable waiting on exited processes.Kevin Krakauer
This makes `runsc wait` behave more like waitpid()/wait4() in that: - Once a process has run to completion, you can wait on it and get its exit code. - Processes not waited on will consume memory (like a zombie process) PiperOrigin-RevId: 213358916 Change-Id: I5b5eca41ce71eea68e447380df8c38361a4d1558
2018-09-13runsc: Support container signal/wait.Lantao Liu
This CL: 1) Fix `runsc wait`, it now also works after the container exits; 2) Generate correct container state in Load; 2) Make sure `Destory` cleanup everything before successfully return. PiperOrigin-RevId: 212900107 Change-Id: Ie129cbb9d74f8151a18364f1fc0b2603eac4109a
2018-09-12runsc: Add exec flag that specifies where to save the sandbox-internal pid.Kevin Krakauer
This is different from the existing -pid-file flag, which saves a host pid. PiperOrigin-RevId: 212713968 Change-Id: I2c486de8dd5cfd9b923fb0970165ef7c5fc597f0
2018-09-11platform: Pass device fd into platform constructor.Nicolas Lacasse
We were previously openining the platform device (i.e. /dev/kvm) inside the platfrom constructor (i.e. kvm.New). This requires that we have RW access to the platform device when constructing the platform. However, now that the runsc sandbox process runs as user "nobody", it is not able to open the platform device. This CL changes the kvm constructor to take the platform device FD, rather than opening the device file itself. The device file is opened outside of the sandbox and passed to the sandbox process. PiperOrigin-RevId: 212505804 Change-Id: I427e1d9de5eb84c84f19d513356e1bb148a52910
2018-09-07Remove '--file-access=direct' optionFabricio Voznika
It was used before gofer was implemented and it's not supported anymore. BREAKING CHANGE: proxy-shared and proxy-exclusive options are now: shared and exclusive. PiperOrigin-RevId: 212017643 Change-Id: If029d4073fe60583e5ca25f98abb2953de0d78fd
2018-09-06runsc: do not delete in paused state.Lantao Liu
PiperOrigin-RevId: 211835570 Change-Id: Ied7933732cad5bc60b762e9c964986cb49a8d9b9
2018-09-05runsc: Support runsc kill multi-container.Kevin Krakauer
Now, we can kill individual containers rather than the entire sandbox. PiperOrigin-RevId: 211748106 Change-Id: Ic97e91db33d53782f838338c4a6d0aab7a313ead
2018-09-05Use container's capabilities in execFabricio Voznika
When no capabilities are specified in exec, use the container's capabilities to match runc's behavior. PiperOrigin-RevId: 211735186 Change-Id: Icd372ed64410c81144eae94f432dffc9fe3a86ce
2018-09-05runsc: Promote getExecutablePathInternal to getExecutablePath.Nicolas Lacasse
Remove GetExecutablePath (the non-internal version). This makes path handling more consistent between exec, root, and child containers. The new getExecutablePath now uses MountNamespace.FindInode, which is more robust than Walking the Dirent tree ourselves. This also removes the last use of lstat(2) in the sentry, so that can be removed from the filters. PiperOrigin-RevId: 211683110 Change-Id: Ic8ec960fc1c267aa7d310b8efe6e900c88a9207a
2018-09-04runsc: Pass log and config files to sandbox process by FD.Nicolas Lacasse
This is a prereq for running the sandbox process as user "nobody", when it may not have permissions to open these files. Instead, we must open then before starting the sandbox process, and pass them by FD. The specutils.ReadSpecFromFile method was fixed to always seek to the beginning of the file before reading. This allows Files from the same FD to be read multiple times, as we do in the boot command when the apply-caps flag is set. Tested with --network=host. PiperOrigin-RevId: 211570647 Change-Id: I685be0a290aa7f70731ebdce82ebc0ebcc9d475c
2018-09-04runsc: fix container rootfs path.Lantao Liu
PiperOrigin-RevId: 211515350 Change-Id: Ia495af57447c799909aa97bb873a50b87bee2625
2018-08-31Automated rollback of changelist 210995199Fabricio Voznika
PiperOrigin-RevId: 211116429 Change-Id: I446d149c822177dc9fc3c64ce5e455f7f029aa82
2018-08-30Add seccomp filter to fsgoferFabricio Voznika
PiperOrigin-RevId: 211011542 Change-Id: Ib5a83a00f8eb6401603c6fb5b59afc93bac52558
2018-08-30runsc: Pass log and config files to sandbox process by FD.Nicolas Lacasse
This is a prereq for running the sandbox process as user "nobody", when it may not have permissions to open these files. Instead, we must open then before starting the sandbox process, and pass them by FD. PiperOrigin-RevId: 210995199 Change-Id: I715875a9553290b4a49394a8fcd93be78b1933dd
2018-08-27Add command-line parameter to trigger panic on signalFabricio Voznika
This is to troubleshoot problems with a hung process that is not responding to 'runsc debug --stack' command. PiperOrigin-RevId: 210483513 Change-Id: I4377b210b4e51bc8a281ad34fd94f3df13d9187d
2018-08-27Put fsgofer inside chrootFabricio Voznika
Now each container gets its own dedicated gofer that is chroot'd to the rootfs path. This is done to add an extra layer of security in case the gofer gets compromised. PiperOrigin-RevId: 210396476 Change-Id: Iba21360a59dfe90875d61000db103f8609157ca0
2018-08-24runsc: Terminal support for "docker exec -ti".Nicolas Lacasse
This CL adds terminal support for "docker exec". We previously only supported consoles for the container process, but not exec processes. The SYS_IOCTL syscall was added to the default seccomp filter list, but only for ioctls that get/set winsize and termios structs. We need to allow these ioctl for all containers because it's possible to run "exec -ti" on a container that was started without an attached console, after the filters have been installed. Note that control-character signals are still not properly supported. Tested with: $ docker run --runtime=runsc -it alpine In another terminial: $ docker exec -it <containerid> /bin/sh PiperOrigin-RevId: 210185456 Change-Id: I6d2401e53a7697bb988c120a8961505c335f96d9
2018-08-24Add option to panic gofer if writes are attempted over RO mountsFabricio Voznika
This is used when '--overlay=true' to guarantee writes are not sent to gofer. PiperOrigin-RevId: 210116288 Change-Id: I7616008c4c0e8d3668e07a205207f46e2144bf30
2018-08-21Initial change for multi-gofer supportFabricio Voznika
PiperOrigin-RevId: 209647293 Change-Id: I980fca1257ea3fcce796388a049c353b0303a8a5
2018-08-15runsc fsgofer: Support dynamic serving of filesystems.Kevin Krakauer
When multiple containers run inside a sentry, each container has its own root filesystem and set of mounts. Containers are also added after sentry boot rather than all configured and known at boot time. The fsgofer needs to be able to serve the root filesystem of each container. Thus, it must be possible to add filesystems after the fsgofer has already started. This change: * Creates a URPC endpoint within the gofer process that listens for requests to serve new content. * Enables the sentry, when starting a new container, to add the new container's filesystem. * Mounts those new filesystems at separate roots within the sentry. PiperOrigin-RevId: 208903248 Change-Id: Ifa91ec9c8caf5f2f0a9eead83c4a57090ce92068
2018-07-25runsc: Fix "exec" command when called without --pid-file.Nicolas Lacasse
When "exec" command is called without the "--detach" flag, we spawn a second "exec" command and wait for that one to start. We use the pid file passed in --pid-file to detect when this second command has started running. However if "exec" is called with no --pid-file flag, this system breaks down, as we don't have a pid file to wait for. This CL ensures that the second instance of the "exec" command always writes a pid-file, so the wait is successful. PiperOrigin-RevId: 206002403 Change-Id: If9f2be31eb6e831734b1b833f25054ec71ab94a6
2018-07-18Moved restore code out of create and made to be called after create.Justine Olshan
Docker expects containers to be created before they are restored. However, gVisor restoring requires specificactions regarding the kernel and the file system. These actions were originally in booting the sandbox. Now setting up the file system is deferred until a call to a call to runsc start. In the restore case, the kernel is destroyed and a new kernel is created in the same process, as we need the same process for Docker. These changes required careful execution of concurrent processes which required the use of a channel. Full docker integration still needs the ability to restore into the same container. PiperOrigin-RevId: 205161441 Change-Id: Ie1d2304ead7e06855319d5dc310678f701bd099f
2018-07-12runsc: Don't close the control server in a defer.Nicolas Lacasse
Closing the control server will block until all open requests have completed. If a control server method panics, we end up stuck because the defer'd Destroy function will never return. PiperOrigin-RevId: 204354676 Change-Id: I6bb1d84b31242d7c3f20d5334b1c966bd6a61dbf
2018-07-03runsc: `runsc wait` print wait status.Lantao Liu
PiperOrigin-RevId: 203160639 Change-Id: I8fb2787ba0efb7eacd9d4c934238a26eb5ae79d5
2018-06-29Sets the restore environment for restoring a container.Justine Olshan
Updated how restoring occurs through boot.go with a separate Restore function. This prevents a new process and new mounts from being created. Added tests to ensure the container is restored. Registered checkpoint and restore commands so they can be used. Docker support for these commands is still limited. Working on #80. PiperOrigin-RevId: 202710950 Change-Id: I2b893ceaef6b9442b1ce3743bd112383cb92af0c
2018-06-29Added leave-running flag for checkpoint.Brielle Broder
The leave-running flag allows the container to continue running after a checkpoint has occurred by doing an immediate restore into a new container with the same container ID after the old container is destroyed. Updates #80. PiperOrigin-RevId: 202695426 Change-Id: Iac50437f5afda018dc18b24bb8ddb935983cf336
2018-06-28runsc: Add the "wait" subcommand.Kevin Krakauer
Users can now call "runsc wait <container id>" to wait on a particular process inside the container. -pid can also be used to wait on a specific PID. Manually tested the wait subcommand for a single waiter and multiple waiters (simultaneously 2 processes waiting on the container and 2 processes waiting on a PID within the container). PiperOrigin-RevId: 202548978 Change-Id: Idd507c2cdea613c3a14879b51cfb0f7ea3fb3d4c
2018-06-28Error out if spec is invalidFabricio Voznika
Closes #66 PiperOrigin-RevId: 202496258 Change-Id: Ib9287c5bf1279ffba1db21ebd9e6b59305cddf34
2018-06-27Added MkdirAll capabilities for Checkpoint's image-path.Brielle Broder
Now able to save the state file (checkpoint.img) at an image-path that had previously not existed. This is important because there can only be one checkpoint.img file per directory so this will enable users to create as many directories as needed for proper organization. PiperOrigin-RevId: 202360414 Change-Id: If5dd2b72e08ab52834a2b605571186d107b64526
2018-06-26runsc: set gofer umask to 0.Lantao Liu
PiperOrigin-RevId: 202185642 Change-Id: I2eefcc0b2ffadc6ef21d177a8a4ab0cda91f3399
2018-06-25Fix lint errorsFabricio Voznika
PiperOrigin-RevId: 201978212 Change-Id: Ie3df1fd41d5293fff66b546a0c68c3bf98126067
2018-06-22Modified Checkpoint/Restore flags to improve compatibility with Docker.Brielle Broder
Added a number of unimplemented flags required for using runsc's Checkpoint and Restore with Docker. Modified the "image-path" flag to require a directory instead of a file. PiperOrigin-RevId: 201697486 Change-Id: I55883df2f1bbc3ec3c395e0ca160ce189e5e7eba
2018-06-21Restore implementation added to runsc.Brielle Broder
Restore creates a new container and uses the given image-path to load a saved image of a previous container. Restore command is plumbed through container and sandbox. This command does not work yet - more to come. PiperOrigin-RevId: 201541229 Change-Id: I864a14c799ce3717d99bcdaaebc764281863d06f
2018-06-21Fix typo in runsc gofer flag descriptionIan Gudger
PiperOrigin-RevId: 201529295 Change-Id: I55eb516ec6d14fbcd48593a3d61f724adc253a23