| Age | Commit message (Collapse) | Author |
|---|
|
The spec command is analygous to the 'runc spec' command and allows for
the convenient creation of a config.json file for users that don't have
runc handy.
Change-Id: Ifdfec37e023048ea461c32da1a9042a45b37d856
PiperOrigin-RevId: 216907826
|
|
This change introduces a new flags to create/run called
--user-log. Logs to this files are visible to users and
are meant to help debugging problems with their images
and containers.
For now only unsupported syscalls are sent to this log,
and only minimum support was added. We can build more
infrastructure around it as needed.
PiperOrigin-RevId: 216735977
Change-Id: I54427ca194604991c407d49943ab3680470de2d0
|
|
Sandbox creation uses the limits and reservations configured in the
OCI spec and set cgroup options accordinly. Then it puts both the
sandbox and gofer processes inside the cgroup.
It also allows the cgroup to be pre-configured by the caller. If the
cgroup already exists, sandbox and gofer processes will join the
cgroup but it will not modify the cgroup with spec limits.
PiperOrigin-RevId: 216538209
Change-Id: If2c65ffedf55820baab743a0edcfb091b89c1019
|
|
PiperOrigin-RevId: 216472439
Change-Id: Ic4cb86c8e0a9cb022d3ceed9dc5615266c307cf9
|
|
We were previously using the sandbox process's stdio as the root container's
stdio. This makes it difficult/impossible to distinguish output application
output from sandbox output, such as panics, which are always written to stderr.
Also close the console socket when we are done with it.
PiperOrigin-RevId: 215585180
Change-Id: I980b8c69bd61a8b8e0a496fd7bc90a06446764e0
|
|
Terminal support in runsc relies on host tty file descriptors that are imported
into the sandbox. Application tty ioctls are sent directly to the host fd.
However, those host tty ioctls are associated in the host kernel with a host
process (in this case runsc), and the host kernel intercepts job control
characters like ^C and send signals to the host process. Thus, typing ^C into a
"runsc exec" shell will send a SIGINT to the runsc process.
This change makes "runsc exec" handle all signals, and forward them into the
sandbox via the "ContainerSignal" urpc method. Since the "runsc exec" is
associated with a particular container process in the sandbox, the signal must
be associated with the same container process.
One big difficulty is that the signal should not necessarily be sent to the
sandbox process started by "exec", but instead must be sent to the foreground
process group for the tty. For example, we may exec "bash", and from bash call
"sleep 100". A ^C at this point should SIGINT sleep, not bash.
To handle this, tty files inside the sandbox must keep track of their
foreground process group, which is set/get via ioctls. When an incoming
ContainerSignal urpc comes in, we look up the foreground process group via the
tty file. Unfortunately, this means we have to expose and cache the tty file in
the Loader.
Note that "runsc exec" now handles signals properly, but "runs run" does not.
That will come in a later CL, as this one is complex enough already.
Example:
root@:/usr/local/apache2# sleep 100
^C
root@:/usr/local/apache2# sleep 100
^Z
[1]+ Stopped sleep 100
root@:/usr/local/apache2# fg
sleep 100
^C
root@:/usr/local/apache2#
PiperOrigin-RevId: 215334554
Change-Id: I53cdce39653027908510a5ba8d08c49f9cf24f39
|
|
PiperOrigin-RevId: 215162121
Change-Id: I35f06ac3235cf31c9e8a158dcf6261a7ded6c4c4
|
|
PiperOrigin-RevId: 214976251
Change-Id: I631348c3886f41f63d0e77e7c4f21b3ede2ab521
|
|
Some tests check current capabilities and re-run the tests as root inside
userns if required capabibilities are missing. It was checking for
CAP_SYS_ADMIN only, CAP_SYS_CHROOT is also required now.
PiperOrigin-RevId: 214949226
Change-Id: Ic81363969fa76c04da408fae8ea7520653266312
|
|
In order to implement kill --all correctly, the Sentry needs
to track all tasks that belong to a given container. This change
introduces ContainerID to the task, that gets inherited by all
children. 'kill --all' then iterates over all tasks comparing the
ContainerID field to find all processes that need to be signalled.
PiperOrigin-RevId: 214841768
Change-Id: I693b2374be8692d88cc441ef13a0ae34abf73ac6
|
|
This makes the flow slightly simpler (no need to call
Loader.SetRootContainer). And this is required change to tag
tasks with container ID inside the Sentry.
PiperOrigin-RevId: 214795210
Change-Id: I6ff4af12e73bb07157f7058bb15fd5bb88760884
|
|
PiperOrigin-RevId: 214700295
Change-Id: I73d8490572eebe5da584af91914650d1953aeb91
|
|
Capabilities.Set() adds capabilities,
but doesn't remove existing ones that might have been loaded. Fixed
the code and added tests.
PiperOrigin-RevId: 213726369
Change-Id: Id7fa6fce53abf26c29b13b9157bb4c6616986fba
|
|
Reap children more systematically in container tests. Previously,
container_test was taking ~5 mins to run because constainer.Destroy()
would timeout waiting for the sandbox process to exit. Now the test
running in less than a minute.
Also made the contract around Container and Sandbox destroy clearer.
PiperOrigin-RevId: 213527471
Change-Id: Icca84ee1212bbdcb62bdfc9cc7b71b12c6d1688d
|
|
This makes `runsc wait` behave more like waitpid()/wait4() in that:
- Once a process has run to completion, you can wait on it and get its exit
code.
- Processes not waited on will consume memory (like a zombie process)
PiperOrigin-RevId: 213358916
Change-Id: I5b5eca41ce71eea68e447380df8c38361a4d1558
|
|
This CL:
1) Fix `runsc wait`, it now also works after the container exits;
2) Generate correct container state in Load;
2) Make sure `Destory` cleanup everything before successfully return.
PiperOrigin-RevId: 212900107
Change-Id: Ie129cbb9d74f8151a18364f1fc0b2603eac4109a
|
|
This is different from the existing -pid-file flag, which saves a host pid.
PiperOrigin-RevId: 212713968
Change-Id: I2c486de8dd5cfd9b923fb0970165ef7c5fc597f0
|
|
We were previously openining the platform device (i.e. /dev/kvm) inside the
platfrom constructor (i.e. kvm.New). This requires that we have RW access to
the platform device when constructing the platform.
However, now that the runsc sandbox process runs as user "nobody", it is not
able to open the platform device.
This CL changes the kvm constructor to take the platform device FD, rather than
opening the device file itself. The device file is opened outside of the
sandbox and passed to the sandbox process.
PiperOrigin-RevId: 212505804
Change-Id: I427e1d9de5eb84c84f19d513356e1bb148a52910
|
|
It was used before gofer was implemented and it's not
supported anymore.
BREAKING CHANGE: proxy-shared and proxy-exclusive options
are now: shared and exclusive.
PiperOrigin-RevId: 212017643
Change-Id: If029d4073fe60583e5ca25f98abb2953de0d78fd
|
|
PiperOrigin-RevId: 211835570
Change-Id: Ied7933732cad5bc60b762e9c964986cb49a8d9b9
|
|
Now, we can kill individual containers rather than the entire sandbox.
PiperOrigin-RevId: 211748106
Change-Id: Ic97e91db33d53782f838338c4a6d0aab7a313ead
|
|
When no capabilities are specified in exec, use the
container's capabilities to match runc's behavior.
PiperOrigin-RevId: 211735186
Change-Id: Icd372ed64410c81144eae94f432dffc9fe3a86ce
|
|
Remove GetExecutablePath (the non-internal version). This makes path handling
more consistent between exec, root, and child containers.
The new getExecutablePath now uses MountNamespace.FindInode, which is more
robust than Walking the Dirent tree ourselves.
This also removes the last use of lstat(2) in the sentry, so that can be
removed from the filters.
PiperOrigin-RevId: 211683110
Change-Id: Ic8ec960fc1c267aa7d310b8efe6e900c88a9207a
|
|
This is a prereq for running the sandbox process as user "nobody", when it may
not have permissions to open these files.
Instead, we must open then before starting the sandbox process, and pass them
by FD.
The specutils.ReadSpecFromFile method was fixed to always seek to the beginning
of the file before reading. This allows Files from the same FD to be read
multiple times, as we do in the boot command when the apply-caps flag is set.
Tested with --network=host.
PiperOrigin-RevId: 211570647
Change-Id: I685be0a290aa7f70731ebdce82ebc0ebcc9d475c
|
|
PiperOrigin-RevId: 211515350
Change-Id: Ia495af57447c799909aa97bb873a50b87bee2625
|
|
PiperOrigin-RevId: 211116429
Change-Id: I446d149c822177dc9fc3c64ce5e455f7f029aa82
|
|
PiperOrigin-RevId: 211011542
Change-Id: Ib5a83a00f8eb6401603c6fb5b59afc93bac52558
|
|
This is a prereq for running the sandbox process as user "nobody", when it may
not have permissions to open these files.
Instead, we must open then before starting the sandbox process, and pass them
by FD.
PiperOrigin-RevId: 210995199
Change-Id: I715875a9553290b4a49394a8fcd93be78b1933dd
|
|
This is to troubleshoot problems with a hung process that is
not responding to 'runsc debug --stack' command.
PiperOrigin-RevId: 210483513
Change-Id: I4377b210b4e51bc8a281ad34fd94f3df13d9187d
|
|
Now each container gets its own dedicated gofer that is chroot'd to the
rootfs path. This is done to add an extra layer of security in case the
gofer gets compromised.
PiperOrigin-RevId: 210396476
Change-Id: Iba21360a59dfe90875d61000db103f8609157ca0
|
|
This CL adds terminal support for "docker exec". We previously only supported
consoles for the container process, but not exec processes.
The SYS_IOCTL syscall was added to the default seccomp filter list, but only
for ioctls that get/set winsize and termios structs. We need to allow these
ioctl for all containers because it's possible to run "exec -ti" on a
container that was started without an attached console, after the filters
have been installed.
Note that control-character signals are still not properly supported.
Tested with:
$ docker run --runtime=runsc -it alpine
In another terminial:
$ docker exec -it <containerid> /bin/sh
PiperOrigin-RevId: 210185456
Change-Id: I6d2401e53a7697bb988c120a8961505c335f96d9
|
|
This is used when '--overlay=true' to guarantee writes are not sent to gofer.
PiperOrigin-RevId: 210116288
Change-Id: I7616008c4c0e8d3668e07a205207f46e2144bf30
|
|
PiperOrigin-RevId: 209647293
Change-Id: I980fca1257ea3fcce796388a049c353b0303a8a5
|
|
When multiple containers run inside a sentry, each container has its own root
filesystem and set of mounts. Containers are also added after sentry boot rather
than all configured and known at boot time.
The fsgofer needs to be able to serve the root filesystem of each container.
Thus, it must be possible to add filesystems after the fsgofer has already
started.
This change:
* Creates a URPC endpoint within the gofer process that listens for requests to
serve new content.
* Enables the sentry, when starting a new container, to add the new container's
filesystem.
* Mounts those new filesystems at separate roots within the sentry.
PiperOrigin-RevId: 208903248
Change-Id: Ifa91ec9c8caf5f2f0a9eead83c4a57090ce92068
|
|
When "exec" command is called without the "--detach" flag, we spawn a second
"exec" command and wait for that one to start. We use the pid file passed in
--pid-file to detect when this second command has started running.
However if "exec" is called with no --pid-file flag, this system breaks down,
as we don't have a pid file to wait for.
This CL ensures that the second instance of the "exec" command always writes a
pid-file, so the wait is successful.
PiperOrigin-RevId: 206002403
Change-Id: If9f2be31eb6e831734b1b833f25054ec71ab94a6
|
|
Docker expects containers to be created before they are restored.
However, gVisor restoring requires specificactions regarding the kernel
and the file system. These actions were originally in booting the sandbox.
Now setting up the file system is deferred until a call to a call to
runsc start. In the restore case, the kernel is destroyed and a new kernel
is created in the same process, as we need the same process for Docker.
These changes required careful execution of concurrent processes which
required the use of a channel.
Full docker integration still needs the ability to restore into the same
container.
PiperOrigin-RevId: 205161441
Change-Id: Ie1d2304ead7e06855319d5dc310678f701bd099f
|
|
Closing the control server will block until all open requests have completed.
If a control server method panics, we end up stuck because the defer'd Destroy
function will never return.
PiperOrigin-RevId: 204354676
Change-Id: I6bb1d84b31242d7c3f20d5334b1c966bd6a61dbf
|
|
PiperOrigin-RevId: 203160639
Change-Id: I8fb2787ba0efb7eacd9d4c934238a26eb5ae79d5
|
|
Updated how restoring occurs through boot.go with a separate Restore function.
This prevents a new process and new mounts from being created.
Added tests to ensure the container is restored.
Registered checkpoint and restore commands so they can be used.
Docker support for these commands is still limited.
Working on #80.
PiperOrigin-RevId: 202710950
Change-Id: I2b893ceaef6b9442b1ce3743bd112383cb92af0c
|
|
The leave-running flag allows the container to continue running after a
checkpoint has occurred by doing an immediate restore into a new
container with the same container ID after the old container is destroyed.
Updates #80.
PiperOrigin-RevId: 202695426
Change-Id: Iac50437f5afda018dc18b24bb8ddb935983cf336
|
|
Users can now call "runsc wait <container id>" to wait on a particular process
inside the container. -pid can also be used to wait on a specific PID.
Manually tested the wait subcommand for a single waiter and multiple waiters
(simultaneously 2 processes waiting on the container and 2 processes waiting on
a PID within the container).
PiperOrigin-RevId: 202548978
Change-Id: Idd507c2cdea613c3a14879b51cfb0f7ea3fb3d4c
|
|
Closes #66
PiperOrigin-RevId: 202496258
Change-Id: Ib9287c5bf1279ffba1db21ebd9e6b59305cddf34
|
|
Now able to save the state file (checkpoint.img) at an image-path that had
previously not existed. This is important because there can only be one
checkpoint.img file per directory so this will enable users to create as many
directories as needed for proper organization.
PiperOrigin-RevId: 202360414
Change-Id: If5dd2b72e08ab52834a2b605571186d107b64526
|
|
PiperOrigin-RevId: 202185642
Change-Id: I2eefcc0b2ffadc6ef21d177a8a4ab0cda91f3399
|
|
PiperOrigin-RevId: 201978212
Change-Id: Ie3df1fd41d5293fff66b546a0c68c3bf98126067
|
|
Added a number of unimplemented flags required for using runsc's
Checkpoint and Restore with Docker. Modified the "image-path" flag to
require a directory instead of a file.
PiperOrigin-RevId: 201697486
Change-Id: I55883df2f1bbc3ec3c395e0ca160ce189e5e7eba
|
|
Restore creates a new container and uses the given image-path to load a saved
image of a previous container. Restore command is plumbed through container
and sandbox. This command does not work yet - more to come.
PiperOrigin-RevId: 201541229
Change-Id: I864a14c799ce3717d99bcdaaebc764281863d06f
|
|
PiperOrigin-RevId: 201529295
Change-Id: I55eb516ec6d14fbcd48593a3d61f724adc253a23
|
|
It prints sandbox stacks to the log to help debug stuckness. I expect
that many more options will be added in the future.
PiperOrigin-RevId: 201405931
Change-Id: I87e560800cd5a5a7b210dc25a5661363c8c3a16e
|
|
Containers are created as processes in the sandbox. Of the many things that
don't work yet, the biggest issue is that the fsgofer is launched with its root
as the sandbox's root directory. Thus, when a container is started and wants to
read anything (including the init binary of the container), the gofer tries to
serve from sandbox's root (which basically just has pause), not the container's.
PiperOrigin-RevId: 201294560
Change-Id: I6423aa8830538959c56ae908ce067e4199d627b1
|
