summaryrefslogtreecommitdiffhomepage
path: root/runsc/cmd
AgeCommit message (Collapse)Author
2019-03-28gofer: some fixs in setupRootFSLiu Hua
1.use root instead of spec.Root.path as mountpoint 2.put remount readonly logic ahead to avoid device busy errors Signed-off-by: Liu Hua <sdu.liu@huawei.com> Change-Id: I9222b4695f917136a97b0898ac6f75fcff296e5d PiperOrigin-RevId: 240818182
2019-03-27gvisor/runsc: address typos from githubAndrei Vagin
Fixes: https://github.com/google/gvisor/issues/143 Fixes #143 PiperOrigin-RevId: 240600719 Change-Id: Id1731b9969f98e32e52e144a6643e12b0b70f168
2019-03-18Add support for mount propagationFabricio Voznika
Properly handle propagation options for root and mounts. Now usage of mount options shared, rshared, and noexec cause error to start. shared/ rshared breaks sandbox=>host isolation. slave however can be supported because changes propagate from host to sandbox. Root FS setup moved inside the gofer. Apart from simplifying the code, it keeps all mounts inside the namespace. And they are torn down when the namespace is destroyed (DestroyFS is no longer needed). PiperOrigin-RevId: 239037661 Change-Id: I8b5ee4d50da33c042ea34fa68e56514ebe20e6e0
2019-03-11Add profiling commands to runscFabricio Voznika
Example: runsc debug --root=<dir> \ --profile-heap=/tmp/heap.prof \ --profile-cpu=/tmp/cpu.prod --profile-delay=30 \ <container ID> PiperOrigin-RevId: 237848456 Change-Id: Icff3f20c1b157a84d0922599eaea327320dad773
2019-01-31gvisor/gofer: Use pivot_root instead of chrootAndrei Vagin
PiperOrigin-RevId: 231864273 Change-Id: I8545b72b615f5c2945df374b801b80be64ec3e13
2019-01-31Remove license commentsMichael Pratt
Nothing reads them and they can simply get stale. Generated with: $ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD PiperOrigin-RevId: 231818945 Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0
2019-01-22Don't bind-mount runsc into a sandbox mntnsAndrei Vagin
PiperOrigin-RevId: 230437407 Change-Id: Id9d8ceeb018aad2fe317407c78c6ee0f4b47aa2b
2019-01-18Scrub runsc error messagesFabricio Voznika
Removed "error" and "failed to" prefix that don't add value from messages. Adjusted a few other messages. In particular, when the container fail to start, the message returned is easier for humans to read: $ docker run --rm --runtime=runsc alpine foobar docker: Error response from daemon: OCI runtime start failed: <path> did not terminate sucessfully: starting container: starting root container [foobar]: starting sandbox: searching for executable "foobar", cwd: "/", $PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin": no such file or directory Closes #77 PiperOrigin-RevId: 230022798 Change-Id: I83339017c70dae09e4f9f8e0ea2e554c4d5d5cd1
2019-01-18runsc: create a new proc mount if the sandbox process is running in a new pidnsAndrei Vagin
PiperOrigin-RevId: 229971902 Change-Id: Ief4fac731e839ef092175908de9375d725eaa3aa
2019-01-14runsc: set up a minimal chroot from the sandbox processAndrei Vagin
In this case, new mounts are not created in the host mount namspaces, so tearDownChroot isn't needed, because chroot will be destroyed with a sandbox mount namespace. In additional, pivot_root can't be called instead of chroot. PiperOrigin-RevId: 229250871 Change-Id: I765bdb587d0b8287a6a8efda8747639d37c7e7b6
2018-12-28Simplify synchronization between runsc and sandbox processFabricio Voznika
Make 'runsc create' join cgroup before creating sandbox process. This removes the need to synchronize platform creation and ensure that sandbox process is charged to the right cgroup from the start. PiperOrigin-RevId: 227166451 Change-Id: Ieb4b18e6ca0daf7b331dc897699ca419bc5ee3a2
2018-12-06A sandbox process should wait until it has not been moved into cgroupsAndrei Vagin
PiperOrigin-RevId: 224418900 Change-Id: I53cf4d7c1c70117875b6920f8fd3d58a3b1497e9
2018-11-28Internal change.Googler
PiperOrigin-RevId: 223231273 Change-Id: I8fb97ea91f7507b4918f7ce6562890611513fc30
2018-11-12runsc: generate exec pidfile after everything is ready.Lantao Liu
PiperOrigin-RevId: 221123160 Change-Id: Ia7061d60d114d69f49aba853fe6bae3c733522b5
2018-11-01Use spec with clean paths for goferFabricio Voznika
Otherwise the gofer's attach point may be different from sandbox when there symlinks in the path. PiperOrigin-RevId: 219730492 Change-Id: Ia9c4c2d16228c6a1a9e790e0cb673fd881003fe1
2018-10-31Make lazy open the mode of operation for fsgoferFabricio Voznika
With recent changes to 9P server, path walks are now safe inside open, create, rename and setattr calls. To simplify the code, remove the lazyopen=false mode that was used for bind mounts, and converge all mounts to using lazy open. PiperOrigin-RevId: 219508628 Change-Id: I073e7e1e2e9a9972d150eaf4cb29e553997a9b76
2018-10-23Track paths and provide a rename hook.Adin Scannell
This change also adds extensive testing to the p9 package via mocks. The sanity checks and type checks are moved from the gofer into the core package, where they can be more easily validated. PiperOrigin-RevId: 218296768 Change-Id: I4fc3c326e7bf1e0e140a454cbacbcc6fd617ab55
2018-10-19Use correct company name in copyright headerIan Gudger
PiperOrigin-RevId: 217951017 Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
2018-10-18Resolve mount paths while setting up root fs mountFabricio Voznika
It's hard to resolve symlinks inside the sandbox because rootfs and mounts may be read-only, forcing us to create mount points inside lower layer of an overlay, **before** the volumes are mounted. Since the destination must already be resolved outside the sandbox when creating mounts, take this opportunity to rewrite the spec with paths resolved. "runsc boot" will use the "resolved" spec to load mounts. In addition, symlink traversals were disabled while mounting containers inside the sandbox. It haven't been able to write a good test for it. So I'm relying on manual tests for now. PiperOrigin-RevId: 217749904 Change-Id: I7ac434d5befd230db1488446cda03300cc0751a9
2018-10-17runsc: Add --pid flag to runsc kill.Kevin Krakauer
--pid allows specific processes to be signalled rather than the container root process or all processes in the container. containerd needs to SIGKILL exec'd processes that timeout and check whether processes are still alive. PiperOrigin-RevId: 217547636 Change-Id: I2058ebb548b51c8eb748f5884fb88bad0b532e45
2018-10-12Added spec command to create OCI spec config.jsonIan Lewis
The spec command is analygous to the 'runc spec' command and allows for the convenient creation of a config.json file for users that don't have runc handy. Change-Id: Ifdfec37e023048ea461c32da1a9042a45b37d856 PiperOrigin-RevId: 216907826
2018-10-11Add bare bones unsupported syscall loggingFabricio Voznika
This change introduces a new flags to create/run called --user-log. Logs to this files are visible to users and are meant to help debugging problems with their images and containers. For now only unsupported syscalls are sent to this log, and only minimum support was added. We can build more infrastructure around it as needed. PiperOrigin-RevId: 216735977 Change-Id: I54427ca194604991c407d49943ab3680470de2d0
2018-10-10Add sandbox to cgroupFabricio Voznika
Sandbox creation uses the limits and reservations configured in the OCI spec and set cgroup options accordinly. Then it puts both the sandbox and gofer processes inside the cgroup. It also allows the cgroup to be pre-configured by the caller. If the cgroup already exists, sandbox and gofer processes will join the cgroup but it will not modify the cgroup with spec limits. PiperOrigin-RevId: 216538209 Change-Id: If2c65ffedf55820baab743a0edcfb091b89c1019
2018-10-09Add tests to verify gofer is chroot'edFabricio Voznika
PiperOrigin-RevId: 216472439 Change-Id: Ic4cb86c8e0a9cb022d3ceed9dc5615266c307cf9
2018-10-03runsc: Pass root container's stdio via FD.Nicolas Lacasse
We were previously using the sandbox process's stdio as the root container's stdio. This makes it difficult/impossible to distinguish output application output from sandbox output, such as panics, which are always written to stderr. Also close the console socket when we are done with it. PiperOrigin-RevId: 215585180 Change-Id: I980b8c69bd61a8b8e0a496fd7bc90a06446764e0
2018-10-01runsc: Support job control signals in "exec -it".Nicolas Lacasse
Terminal support in runsc relies on host tty file descriptors that are imported into the sandbox. Application tty ioctls are sent directly to the host fd. However, those host tty ioctls are associated in the host kernel with a host process (in this case runsc), and the host kernel intercepts job control characters like ^C and send signals to the host process. Thus, typing ^C into a "runsc exec" shell will send a SIGINT to the runsc process. This change makes "runsc exec" handle all signals, and forward them into the sandbox via the "ContainerSignal" urpc method. Since the "runsc exec" is associated with a particular container process in the sandbox, the signal must be associated with the same container process. One big difficulty is that the signal should not necessarily be sent to the sandbox process started by "exec", but instead must be sent to the foreground process group for the tty. For example, we may exec "bash", and from bash call "sleep 100". A ^C at this point should SIGINT sleep, not bash. To handle this, tty files inside the sandbox must keep track of their foreground process group, which is set/get via ioctls. When an incoming ContainerSignal urpc comes in, we look up the foreground process group via the tty file. Unfortunately, this means we have to expose and cache the tty file in the Loader. Note that "runsc exec" now handles signals properly, but "runs run" does not. That will come in a later CL, as this one is complex enough already. Example: root@:/usr/local/apache2# sleep 100 ^C root@:/usr/local/apache2# sleep 100 ^Z [1]+ Stopped sleep 100 root@:/usr/local/apache2# fg sleep 100 ^C root@:/usr/local/apache2# PiperOrigin-RevId: 215334554 Change-Id: I53cdce39653027908510a5ba8d08c49f9cf24f39
2018-09-30Removed duplicate/stale TODOsFabricio Voznika
PiperOrigin-RevId: 215162121 Change-Id: I35f06ac3235cf31c9e8a158dcf6261a7ded6c4c4
2018-09-28Make runsc kill and delete more conformant to the "spec"Fabricio Voznika
PiperOrigin-RevId: 214976251 Change-Id: I631348c3886f41f63d0e77e7c4f21b3ede2ab521
2018-09-28Switch to root in userns when CAP_SYS_CHROOT is also missingFabricio Voznika
Some tests check current capabilities and re-run the tests as root inside userns if required capabibilities are missing. It was checking for CAP_SYS_ADMIN only, CAP_SYS_CHROOT is also required now. PiperOrigin-RevId: 214949226 Change-Id: Ic81363969fa76c04da408fae8ea7520653266312
2018-09-27Implement 'runsc kill --all'Fabricio Voznika
In order to implement kill --all correctly, the Sentry needs to track all tasks that belong to a given container. This change introduces ContainerID to the task, that gets inherited by all children. 'kill --all' then iterates over all tasks comparing the ContainerID field to find all processes that need to be signalled. PiperOrigin-RevId: 214841768 Change-Id: I693b2374be8692d88cc441ef13a0ae34abf73ac6
2018-09-27Refactor 'runsc boot' to take container ID as argumentFabricio Voznika
This makes the flow slightly simpler (no need to call Loader.SetRootContainer). And this is required change to tag tasks with container ID inside the Sentry. PiperOrigin-RevId: 214795210 Change-Id: I6ff4af12e73bb07157f7058bb15fd5bb88760884
2018-09-26runsc: fix pid file race condition in exec detach mode.Lantao Liu
PiperOrigin-RevId: 214700295 Change-Id: I73d8490572eebe5da584af91914650d1953aeb91
2018-09-19Fix sandbox and gofer capabilitiesFabricio Voznika
Capabilities.Set() adds capabilities, but doesn't remove existing ones that might have been loaded. Fixed the code and added tests. PiperOrigin-RevId: 213726369 Change-Id: Id7fa6fce53abf26c29b13b9157bb4c6616986fba
2018-09-18Handle children processes better in testsFabricio Voznika
Reap children more systematically in container tests. Previously, container_test was taking ~5 mins to run because constainer.Destroy() would timeout waiting for the sandbox process to exit. Now the test running in less than a minute. Also made the contract around Container and Sandbox destroy clearer. PiperOrigin-RevId: 213527471 Change-Id: Icca84ee1212bbdcb62bdfc9cc7b71b12c6d1688d
2018-09-17runsc: Enable waiting on exited processes.Kevin Krakauer
This makes `runsc wait` behave more like waitpid()/wait4() in that: - Once a process has run to completion, you can wait on it and get its exit code. - Processes not waited on will consume memory (like a zombie process) PiperOrigin-RevId: 213358916 Change-Id: I5b5eca41ce71eea68e447380df8c38361a4d1558
2018-09-13runsc: Support container signal/wait.Lantao Liu
This CL: 1) Fix `runsc wait`, it now also works after the container exits; 2) Generate correct container state in Load; 2) Make sure `Destory` cleanup everything before successfully return. PiperOrigin-RevId: 212900107 Change-Id: Ie129cbb9d74f8151a18364f1fc0b2603eac4109a
2018-09-12runsc: Add exec flag that specifies where to save the sandbox-internal pid.Kevin Krakauer
This is different from the existing -pid-file flag, which saves a host pid. PiperOrigin-RevId: 212713968 Change-Id: I2c486de8dd5cfd9b923fb0970165ef7c5fc597f0
2018-09-11platform: Pass device fd into platform constructor.Nicolas Lacasse
We were previously openining the platform device (i.e. /dev/kvm) inside the platfrom constructor (i.e. kvm.New). This requires that we have RW access to the platform device when constructing the platform. However, now that the runsc sandbox process runs as user "nobody", it is not able to open the platform device. This CL changes the kvm constructor to take the platform device FD, rather than opening the device file itself. The device file is opened outside of the sandbox and passed to the sandbox process. PiperOrigin-RevId: 212505804 Change-Id: I427e1d9de5eb84c84f19d513356e1bb148a52910
2018-09-07Remove '--file-access=direct' optionFabricio Voznika
It was used before gofer was implemented and it's not supported anymore. BREAKING CHANGE: proxy-shared and proxy-exclusive options are now: shared and exclusive. PiperOrigin-RevId: 212017643 Change-Id: If029d4073fe60583e5ca25f98abb2953de0d78fd
2018-09-06runsc: do not delete in paused state.Lantao Liu
PiperOrigin-RevId: 211835570 Change-Id: Ied7933732cad5bc60b762e9c964986cb49a8d9b9
2018-09-05runsc: Support runsc kill multi-container.Kevin Krakauer
Now, we can kill individual containers rather than the entire sandbox. PiperOrigin-RevId: 211748106 Change-Id: Ic97e91db33d53782f838338c4a6d0aab7a313ead
2018-09-05Use container's capabilities in execFabricio Voznika
When no capabilities are specified in exec, use the container's capabilities to match runc's behavior. PiperOrigin-RevId: 211735186 Change-Id: Icd372ed64410c81144eae94f432dffc9fe3a86ce
2018-09-05runsc: Promote getExecutablePathInternal to getExecutablePath.Nicolas Lacasse
Remove GetExecutablePath (the non-internal version). This makes path handling more consistent between exec, root, and child containers. The new getExecutablePath now uses MountNamespace.FindInode, which is more robust than Walking the Dirent tree ourselves. This also removes the last use of lstat(2) in the sentry, so that can be removed from the filters. PiperOrigin-RevId: 211683110 Change-Id: Ic8ec960fc1c267aa7d310b8efe6e900c88a9207a
2018-09-04runsc: Pass log and config files to sandbox process by FD.Nicolas Lacasse
This is a prereq for running the sandbox process as user "nobody", when it may not have permissions to open these files. Instead, we must open then before starting the sandbox process, and pass them by FD. The specutils.ReadSpecFromFile method was fixed to always seek to the beginning of the file before reading. This allows Files from the same FD to be read multiple times, as we do in the boot command when the apply-caps flag is set. Tested with --network=host. PiperOrigin-RevId: 211570647 Change-Id: I685be0a290aa7f70731ebdce82ebc0ebcc9d475c
2018-09-04runsc: fix container rootfs path.Lantao Liu
PiperOrigin-RevId: 211515350 Change-Id: Ia495af57447c799909aa97bb873a50b87bee2625
2018-08-31Automated rollback of changelist 210995199Fabricio Voznika
PiperOrigin-RevId: 211116429 Change-Id: I446d149c822177dc9fc3c64ce5e455f7f029aa82
2018-08-30Add seccomp filter to fsgoferFabricio Voznika
PiperOrigin-RevId: 211011542 Change-Id: Ib5a83a00f8eb6401603c6fb5b59afc93bac52558
2018-08-30runsc: Pass log and config files to sandbox process by FD.Nicolas Lacasse
This is a prereq for running the sandbox process as user "nobody", when it may not have permissions to open these files. Instead, we must open then before starting the sandbox process, and pass them by FD. PiperOrigin-RevId: 210995199 Change-Id: I715875a9553290b4a49394a8fcd93be78b1933dd
2018-08-27Add command-line parameter to trigger panic on signalFabricio Voznika
This is to troubleshoot problems with a hung process that is not responding to 'runsc debug --stack' command. PiperOrigin-RevId: 210483513 Change-Id: I4377b210b4e51bc8a281ad34fd94f3df13d9187d
2018-08-27Put fsgofer inside chrootFabricio Voznika
Now each container gets its own dedicated gofer that is chroot'd to the rootfs path. This is done to add an extra layer of security in case the gofer gets compromised. PiperOrigin-RevId: 210396476 Change-Id: Iba21360a59dfe90875d61000db103f8609157ca0
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 18:21:34 +0000