| Age | Commit message (Collapse) | Author |
|---|
|
This is a prereq for running the sandbox process as user "nobody", when it may
not have permissions to open these files.
Instead, we must open then before starting the sandbox process, and pass them
by FD.
The specutils.ReadSpecFromFile method was fixed to always seek to the beginning
of the file before reading. This allows Files from the same FD to be read
multiple times, as we do in the boot command when the apply-caps flag is set.
Tested with --network=host.
PiperOrigin-RevId: 211570647
Change-Id: I685be0a290aa7f70731ebdce82ebc0ebcc9d475c
|
|
PiperOrigin-RevId: 211515350
Change-Id: Ia495af57447c799909aa97bb873a50b87bee2625
|
|
PiperOrigin-RevId: 211116429
Change-Id: I446d149c822177dc9fc3c64ce5e455f7f029aa82
|
|
PiperOrigin-RevId: 211011542
Change-Id: Ib5a83a00f8eb6401603c6fb5b59afc93bac52558
|
|
This is a prereq for running the sandbox process as user "nobody", when it may
not have permissions to open these files.
Instead, we must open then before starting the sandbox process, and pass them
by FD.
PiperOrigin-RevId: 210995199
Change-Id: I715875a9553290b4a49394a8fcd93be78b1933dd
|
|
This is to troubleshoot problems with a hung process that is
not responding to 'runsc debug --stack' command.
PiperOrigin-RevId: 210483513
Change-Id: I4377b210b4e51bc8a281ad34fd94f3df13d9187d
|
|
Now each container gets its own dedicated gofer that is chroot'd to the
rootfs path. This is done to add an extra layer of security in case the
gofer gets compromised.
PiperOrigin-RevId: 210396476
Change-Id: Iba21360a59dfe90875d61000db103f8609157ca0
|
|
This CL adds terminal support for "docker exec". We previously only supported
consoles for the container process, but not exec processes.
The SYS_IOCTL syscall was added to the default seccomp filter list, but only
for ioctls that get/set winsize and termios structs. We need to allow these
ioctl for all containers because it's possible to run "exec -ti" on a
container that was started without an attached console, after the filters
have been installed.
Note that control-character signals are still not properly supported.
Tested with:
$ docker run --runtime=runsc -it alpine
In another terminial:
$ docker exec -it <containerid> /bin/sh
PiperOrigin-RevId: 210185456
Change-Id: I6d2401e53a7697bb988c120a8961505c335f96d9
|
|
This is used when '--overlay=true' to guarantee writes are not sent to gofer.
PiperOrigin-RevId: 210116288
Change-Id: I7616008c4c0e8d3668e07a205207f46e2144bf30
|
|
PiperOrigin-RevId: 209647293
Change-Id: I980fca1257ea3fcce796388a049c353b0303a8a5
|
|
When multiple containers run inside a sentry, each container has its own root
filesystem and set of mounts. Containers are also added after sentry boot rather
than all configured and known at boot time.
The fsgofer needs to be able to serve the root filesystem of each container.
Thus, it must be possible to add filesystems after the fsgofer has already
started.
This change:
* Creates a URPC endpoint within the gofer process that listens for requests to
serve new content.
* Enables the sentry, when starting a new container, to add the new container's
filesystem.
* Mounts those new filesystems at separate roots within the sentry.
PiperOrigin-RevId: 208903248
Change-Id: Ifa91ec9c8caf5f2f0a9eead83c4a57090ce92068
|
|
When "exec" command is called without the "--detach" flag, we spawn a second
"exec" command and wait for that one to start. We use the pid file passed in
--pid-file to detect when this second command has started running.
However if "exec" is called with no --pid-file flag, this system breaks down,
as we don't have a pid file to wait for.
This CL ensures that the second instance of the "exec" command always writes a
pid-file, so the wait is successful.
PiperOrigin-RevId: 206002403
Change-Id: If9f2be31eb6e831734b1b833f25054ec71ab94a6
|
|
Docker expects containers to be created before they are restored.
However, gVisor restoring requires specificactions regarding the kernel
and the file system. These actions were originally in booting the sandbox.
Now setting up the file system is deferred until a call to a call to
runsc start. In the restore case, the kernel is destroyed and a new kernel
is created in the same process, as we need the same process for Docker.
These changes required careful execution of concurrent processes which
required the use of a channel.
Full docker integration still needs the ability to restore into the same
container.
PiperOrigin-RevId: 205161441
Change-Id: Ie1d2304ead7e06855319d5dc310678f701bd099f
|
|
Closing the control server will block until all open requests have completed.
If a control server method panics, we end up stuck because the defer'd Destroy
function will never return.
PiperOrigin-RevId: 204354676
Change-Id: I6bb1d84b31242d7c3f20d5334b1c966bd6a61dbf
|
|
PiperOrigin-RevId: 203160639
Change-Id: I8fb2787ba0efb7eacd9d4c934238a26eb5ae79d5
|
|
Updated how restoring occurs through boot.go with a separate Restore function.
This prevents a new process and new mounts from being created.
Added tests to ensure the container is restored.
Registered checkpoint and restore commands so they can be used.
Docker support for these commands is still limited.
Working on #80.
PiperOrigin-RevId: 202710950
Change-Id: I2b893ceaef6b9442b1ce3743bd112383cb92af0c
|
|
The leave-running flag allows the container to continue running after a
checkpoint has occurred by doing an immediate restore into a new
container with the same container ID after the old container is destroyed.
Updates #80.
PiperOrigin-RevId: 202695426
Change-Id: Iac50437f5afda018dc18b24bb8ddb935983cf336
|
|
Users can now call "runsc wait <container id>" to wait on a particular process
inside the container. -pid can also be used to wait on a specific PID.
Manually tested the wait subcommand for a single waiter and multiple waiters
(simultaneously 2 processes waiting on the container and 2 processes waiting on
a PID within the container).
PiperOrigin-RevId: 202548978
Change-Id: Idd507c2cdea613c3a14879b51cfb0f7ea3fb3d4c
|
|
Closes #66
PiperOrigin-RevId: 202496258
Change-Id: Ib9287c5bf1279ffba1db21ebd9e6b59305cddf34
|
|
Now able to save the state file (checkpoint.img) at an image-path that had
previously not existed. This is important because there can only be one
checkpoint.img file per directory so this will enable users to create as many
directories as needed for proper organization.
PiperOrigin-RevId: 202360414
Change-Id: If5dd2b72e08ab52834a2b605571186d107b64526
|
|
PiperOrigin-RevId: 202185642
Change-Id: I2eefcc0b2ffadc6ef21d177a8a4ab0cda91f3399
|
|
PiperOrigin-RevId: 201978212
Change-Id: Ie3df1fd41d5293fff66b546a0c68c3bf98126067
|
|
Added a number of unimplemented flags required for using runsc's
Checkpoint and Restore with Docker. Modified the "image-path" flag to
require a directory instead of a file.
PiperOrigin-RevId: 201697486
Change-Id: I55883df2f1bbc3ec3c395e0ca160ce189e5e7eba
|
|
Restore creates a new container and uses the given image-path to load a saved
image of a previous container. Restore command is plumbed through container
and sandbox. This command does not work yet - more to come.
PiperOrigin-RevId: 201541229
Change-Id: I864a14c799ce3717d99bcdaaebc764281863d06f
|
|
PiperOrigin-RevId: 201529295
Change-Id: I55eb516ec6d14fbcd48593a3d61f724adc253a23
|
|
It prints sandbox stacks to the log to help debug stuckness. I expect
that many more options will be added in the future.
PiperOrigin-RevId: 201405931
Change-Id: I87e560800cd5a5a7b210dc25a5661363c8c3a16e
|
|
Containers are created as processes in the sandbox. Of the many things that
don't work yet, the biggest issue is that the fsgofer is launched with its root
as the sandbox's root directory. Thus, when a container is started and wants to
read anything (including the init binary of the container), the gofer tries to
serve from sandbox's root (which basically just has pause), not the container's.
PiperOrigin-RevId: 201294560
Change-Id: I6423aa8830538959c56ae908ce067e4199d627b1
|
|
Resume checks the status of the container and unpauses the kernel
if its status is paused. Otherwise nothing happens.
Tests were added to ensure that the process is in the correct state
after various commands.
PiperOrigin-RevId: 201251234
Change-Id: Ifd11b336c33b654fea6238738f864fcf2bf81e19
|
|
A file descriptor was added as a flag to boot so a state file can restore a
container that was checkpointed.
PiperOrigin-RevId: 201068699
Change-Id: I18e96069488ffa3add468861397f3877725544aa
|
|
Like runc, the pause command will pause the processes of the given container.
It will set that container's status to "paused."
A resume command will be be added to unpause and continue running the process.
PiperOrigin-RevId: 200789624
Change-Id: I72a5d7813d90ecfc4d01cc252d6018855016b1ea
|
|
Signal is arg 1, not 2.
Killing with SIGABRT is useful to get Go traces.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Change-Id: I0b78e34a9de3fb3385108e26fdb4ff6e9347aeff
PiperOrigin-RevId: 200742743
|
|
This is the first iteration of checkpoint that actually saves to a file.
Tests for checkpoint are included.
Ran into an issue when private unix sockets are enabled. An error message
was added for this case and the mutex state was set.
PiperOrigin-RevId: 200269470
Change-Id: I28d29a9f92c44bf73dc4a4b12ae0509ee4070e93
|
|
PiperOrigin-RevId: 199808391
Change-Id: Ib37a4fb6193dc85c1f93bc16769d6aa41854b9d4
|
|
Just a UI/usability addition. It's a lot easier to type "60" than
"60185c721d7e10c00489f1fa210ee0d35c594873d6376b457fb1815e4fdbfc2c".
PiperOrigin-RevId: 199547932
Change-Id: I19011b5061a88aba48a9ad7f8cf954a6782de854
|
|
Checkpoint command is plumbed through container and sandbox.
Restore has also been added but it is only a stub. None of this
works yet. More changes to come.
PiperOrigin-RevId: 199510105
Change-Id: Ibd08d57f4737847eb25ca20b114518e487320185
|
|
This addresses the first issue reported in #59. CRI-O expects runsc to
return success to delete when --force is used with a non-existing container.
PiperOrigin-RevId: 198487418
Change-Id: If7660e8fdab1eb29549d0a7a45ea82e20a1d4f4a
|
|
This is another step towards multi-container support.
Previously, we delivered signals directly to the sandbox process (which then
forwarded the signal to PID 1 inside the sandbox). Similarly, we waited on a
container by waiting on the sandbox process itself. This approach will not work
when there are multiple containers inside the sandbox, and we need to
signal/wait on individual containers.
This CL adds two new messages, ContainerSignal and ContainerWait. These
messages include the id of the container to signal/wait. The controller inside
the sandbox receives these messages and signals/waits on the appropriate
process inside the sandbox.
The container id is plumbed into the sandbox, but it currently is not used. We
still end up signaling/waiting on PID 1 in all cases. Once we actually have
multiple containers inside the sandbox, we will need to keep some sort of map
of container id -> pid (or possibly pid namespace), and signal/kill the
appropriate process for the container.
PiperOrigin-RevId: 197028366
Change-Id: I07b4d5dc91ecd2affc1447e6b4bdd6b0b7360895
|
|
This is a necessary prerequisite for supporting multiple containers in a single
sandbox.
All the commands (in cmd package) now call operations on Containers (container
package). When a Container first starts, it will create a Sandbox with the same
ID.
The Sandbox class is now simpler, as it only knows how to create boot/gofer
processes, and how to forward commands into the running boot process.
There are TODOs sprinkled around for additional support for multiple
containers. Most notably, we need to detect when a container is intended to run
in an existing sandbox (by reading the metadata), and then have some way to
signal to the sandbox to start a new container. Other urpc calls into the
sandbox need to pass the container ID, so the sandbox can run the operation on
the given container. These are only half-plummed through right now.
PiperOrigin-RevId: 196688269
Change-Id: I1ecf4abbb9dd8987a53ae509df19341aaf42b5b0
|
|
PiperOrigin-RevId: 195365050
Change-Id: I8754dc7a3fc2975d422cae453762a455478a8e6a
|
|
Detachable exec commands are handled in the client entirely and the detach option is not used anymore.
PiperOrigin-RevId: 195181272
Change-Id: I6e82a2876d2c173709c099be59670f71702e5bf0
|
|
PiperOrigin-RevId: 194583126
Change-Id: Ica1d8821a90f74e7e745962d71801c598c652463
|
