| Age | Commit message (Collapse) | Author |
|---|
|
|
|
PiperOrigin-RevId: 372993341
|
|
|
|
Add a coverage-report flag that will cause the sandbox to generate a coverage
report (with suffix .cov) in the debug log directory upon exiting. For the
report to be generated, runsc must have been built with the following Bazel
flags: `--collect_code_coverage --instrumentation_filter=...`.
With coverage reports, we should be able to aggregate results across all tests
to surface code coverage statistics for the project as a whole.
The report is simply a text file with each line representing a covered block
as `file:start_line.start_col,end_line.end_col`. Note that this is similar to
the format of coverage reports generated with `go test -coverprofile`,
although we omit the count and number of statements, which are not useful for
us.
Some simple ways of getting coverage reports:
bazel test <some_test> --collect_code_coverage \
--instrumentation_filter=//pkg/...
bazel build //runsc --collect_code_coverage \
--instrumentation_filter=//pkg/...
runsc -coverage-report=dir/ <other_flags> do ...
PiperOrigin-RevId: 368952911
|
|
|
|
PiperOrigin-RevId: 368919504
|
|
|
|
This is needed to enable Xattrs features required by verity.
PiperOrigin-RevId: 366843640
|
|
|
|
Implement a new runsc command to set up a sandbox with verityfs and
run the measure tool. This is loosely forked from the do command, and
currently requires the caller to provide the measure tool binary.
PiperOrigin-RevId: 366553769
|
|
As MDS side channel attack does not affect ARM64, we disable
mitigate on ARM64 in case misusage.
For more detail, please refer to:
https://access.redhat.com/security/vulnerabilities/mds
Signed-off-by: Howard Zhang <howard.zhang@arm.com>
|
|
|
|
VFS1 skips over mounts that overrides files in /dev because the list of
files is hardcoded. This is not needed for VFS2 and a recent change
lifted this restriction. However, parts of the code were still skipping
/dev mounts even in VFS2, causing the loader to panic when it ran short
of FDs to connect to the gofer.
PiperOrigin-RevId: 365858436
|
|
|
|
Also adds support for clearing the setuid bit when appropriate (writing,
truncating, changing size, changing UID, or changing GID).
VFS2 only.
PiperOrigin-RevId: 364661835
|
|
|
|
These host calls are needed for Verity fs to generate/verify hashes.
PiperOrigin-RevId: 364598180
|
|
|
|
containerd usually configures both /dev and /dev/shm as tmpfs mounts, e.g.:
```
"mounts": [
...
{
"destination": "/dev",
"type": "tmpfs",
"source": "/run/containerd/io.containerd.runtime.v2.task/moby/10eedbd6a0e7937ddfcab90f2c25bd9a9968b734c4ae361318142165d445e67e/tmpfs",
"options": [
"nosuid",
"strictatime",
"mode=755",
"size=65536k"
]
},
...
{
"destination": "/dev/shm",
"type": "tmpfs",
"source": "/run/containerd/io.containerd.runtime.v2.task/moby/10eedbd6a0e7937ddfcab90f2c25bd9a9968b734c4ae361318142165d445e67e/shm",
"options": [
"nosuid",
"noexec",
"nodev",
"mode=1777",
"size=67108864"
]
},
...
```
(This is mostly consistent with how Linux is usually configured, except that
/dev is conventionally devtmpfs, not regular tmpfs. runc/libcontainer
implements OCI-runtime-spec-undocumented behavior to create
/dev/{ptmx,fd,stdin,stdout,stderr} in non-bind /dev mounts. runsc silently
switches /dev to devtmpfs. In VFS1, this is necessary to get device files like
/dev/null at all, since VFS1 doesn't support real device special files, only
what is hardcoded in devfs. VFS2 does support device special files, but using
devtmpfs is the easiest way to get pre-created files in /dev.)
runsc ignores many /dev submounts in the spec, including /dev/shm. In VFS1,
this appears to be to avoid introducing a submount overlay for /dev, and is
mostly fine since the typical mode for the /dev/shm mount is ~consistent with
the mode of the /dev/shm directory provided by devfs (modulo the sticky bit).
In VFS2, this is vestigial (VFS2 does not use submount overlays), and devtmpfs'
/dev/shm mode is correct for the mount point but not the mount. So turn off
this behavior for VFS2.
After this change:
```
$ docker run --rm -it ubuntu:focal ls -lah /dev/shm
total 0
drwxrwxrwt 2 root root 40 Mar 18 00:16 .
drwxr-xr-x 5 root root 360 Mar 18 00:16 ..
$ docker run --runtime=runsc --rm -it ubuntu:focal ls -lah /dev/shm
total 0
drwxrwxrwx 1 root root 0 Mar 18 00:16 .
dr-xr-xr-x 1 root root 0 Mar 18 00:16 ..
$ docker run --runtime=runsc-vfs2 --rm -it ubuntu:focal ls -lah /dev/shm
total 0
drwxrwxrwt 2 root root 40 Mar 18 00:16 .
drwxr-xr-x 5 root root 320 Mar 18 00:16 ..
```
Fixes #5687
PiperOrigin-RevId: 363699385
|
|
|
|
PiperOrigin-RevId: 362360425
|
|
|
|
PiperOrigin-RevId: 361689477
|
|
|
|
The syscall package has been deprecated in favor of golang.org/x/sys.
Note that syscall is still used in some places because the following don't seem
to have an equivalent in unix package:
- syscall.SysProcIDMap
- syscall.Credential
Updates #214
PiperOrigin-RevId: 361381490
|
|
|
|
Add reverse operation to mitigate that just enables
all CPUs.
PiperOrigin-RevId: 360511215
|
|
|
|
Previously, loader.signalProcess was inconsitently using both root and
container's PID namespace to find the process. It used root namespace
for the exec'd process and container's PID namespace for other processes.
This fixes the code to use the root PID namespace across the board, which
is the same PID reported in `runsc ps` (or soon will after
https://github.com/google/gvisor/pull/5519).
PiperOrigin-RevId: 358836297
|
|
|
|
PiperOrigin-RevId: 356772367
|
|
|
|
Because we lack gVisor-internal cgroups, we take the CPU usage of the entire pod
and divide it proportionally according to sentry-internal usage stats.
This fixes `kubectl top pods`, which gets a pod's CPU usage by summing the usage
of its containers.
Addresses #172.
PiperOrigin-RevId: 355229833
|
|
Whether the variable was found is already returned by syscall.Getenv.
os.Getenv drops this value while os.Lookupenv passes it along.
PiperOrigin-RevId: 351674032
|
|
|
|
These are primarily simplification and lint mistakes. However, minor
fixes are also included and tests added where appropriate.
PiperOrigin-RevId: 351425971
|
|
|
|
Closes #5226
PiperOrigin-RevId: 351259576
|
|
|
|
This includes minor fix-ups:
* Handle SIGTERM in runsc debug, to exit gracefully.
* Fix cmd.debug.go opening all profiles as RDONLY.
* Fix the test name in fio_test.go, and encode the block size in the test.
PiperOrigin-RevId: 350205718
|
|
|
|
Closes #5052
PiperOrigin-RevId: 349579814
|
|
|
|
This allows for a model of profiling when you can start collection, and
it will terminate when the sandbox terminates. Without this synchronous
call, it is effectively impossible to collect length blocking and mutex
profiles.
PiperOrigin-RevId: 349483418
|
|
|
|
This allows to find all containers inside a sandbox more efficiently.
This operation is required every time a container starts and stops,
and previously required loading *all* container state files to check
whether the container belonged to the sandbox.
Apert from being inneficient, it has caused problems when state files
are stale or corrupt, causing inavalability to create any container.
Also adjust commands `list` and `debug` to skip over files that fail
to load.
Resolves #5052
PiperOrigin-RevId: 348050637
|
|
|
|
This command takes instruction pointers from stdin and converts them into their
corresponding file names and line/column numbers in the runsc source code. The
inputs are not interpreted as actual addresses, but as synthetic values that are
exposed through /sys/kernel/debug/kcov. One can extract coverage information
from kcov and translate those values into locations in the source code by
running symbolize on the same runsc binary.
This will allow us to generate syzkaller coverage reports.
PiperOrigin-RevId: 347089624
|
|
|
|
c.Usage() only returns a string; f.Usage() will print the usage message.
PiperOrigin-RevId: 345500123
|
