| Age | Commit message (Collapse) | Author |
|---|
|
Updates #234
PiperOrigin-RevId: 250323553
|
|
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes #209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
|
|
PiperOrigin-RevId: 245511019
Change-Id: Ia9562a301b46458988a6a1f0bbd5f07cbfcb0615
|
|
PiperOrigin-RevId: 230437407
Change-Id: Id9d8ceeb018aad2fe317407c78c6ee0f4b47aa2b
|
|
Removed "error" and "failed to" prefix that don't add value
from messages. Adjusted a few other messages. In particular,
when the container fail to start, the message returned is easier
for humans to read:
$ docker run --rm --runtime=runsc alpine foobar
docker: Error response from daemon: OCI runtime start failed: <path> did not terminate sucessfully: starting container: starting root container [foobar]: starting sandbox: searching for executable "foobar", cwd: "/", $PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin": no such file or directory
Closes #77
PiperOrigin-RevId: 230022798
Change-Id: I83339017c70dae09e4f9f8e0ea2e554c4d5d5cd1
|
|
PiperOrigin-RevId: 223231273
Change-Id: I8fb97ea91f7507b4918f7ce6562890611513fc30
|
|
PiperOrigin-RevId: 221123160
Change-Id: Ia7061d60d114d69f49aba853fe6bae3c733522b5
|
|
PiperOrigin-RevId: 217951017
Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
|
|
Terminal support in runsc relies on host tty file descriptors that are imported
into the sandbox. Application tty ioctls are sent directly to the host fd.
However, those host tty ioctls are associated in the host kernel with a host
process (in this case runsc), and the host kernel intercepts job control
characters like ^C and send signals to the host process. Thus, typing ^C into a
"runsc exec" shell will send a SIGINT to the runsc process.
This change makes "runsc exec" handle all signals, and forward them into the
sandbox via the "ContainerSignal" urpc method. Since the "runsc exec" is
associated with a particular container process in the sandbox, the signal must
be associated with the same container process.
One big difficulty is that the signal should not necessarily be sent to the
sandbox process started by "exec", but instead must be sent to the foreground
process group for the tty. For example, we may exec "bash", and from bash call
"sleep 100". A ^C at this point should SIGINT sleep, not bash.
To handle this, tty files inside the sandbox must keep track of their
foreground process group, which is set/get via ioctls. When an incoming
ContainerSignal urpc comes in, we look up the foreground process group via the
tty file. Unfortunately, this means we have to expose and cache the tty file in
the Loader.
Note that "runsc exec" now handles signals properly, but "runs run" does not.
That will come in a later CL, as this one is complex enough already.
Example:
root@:/usr/local/apache2# sleep 100
^C
root@:/usr/local/apache2# sleep 100
^Z
[1]+ Stopped sleep 100
root@:/usr/local/apache2# fg
sleep 100
^C
root@:/usr/local/apache2#
PiperOrigin-RevId: 215334554
Change-Id: I53cdce39653027908510a5ba8d08c49f9cf24f39
|
|
PiperOrigin-RevId: 214700295
Change-Id: I73d8490572eebe5da584af91914650d1953aeb91
|
|
This makes `runsc wait` behave more like waitpid()/wait4() in that:
- Once a process has run to completion, you can wait on it and get its exit
code.
- Processes not waited on will consume memory (like a zombie process)
PiperOrigin-RevId: 213358916
Change-Id: I5b5eca41ce71eea68e447380df8c38361a4d1558
|
|
This is different from the existing -pid-file flag, which saves a host pid.
PiperOrigin-RevId: 212713968
Change-Id: I2c486de8dd5cfd9b923fb0970165ef7c5fc597f0
|
|
When no capabilities are specified in exec, use the
container's capabilities to match runc's behavior.
PiperOrigin-RevId: 211735186
Change-Id: Icd372ed64410c81144eae94f432dffc9fe3a86ce
|
|
Remove GetExecutablePath (the non-internal version). This makes path handling
more consistent between exec, root, and child containers.
The new getExecutablePath now uses MountNamespace.FindInode, which is more
robust than Walking the Dirent tree ourselves.
This also removes the last use of lstat(2) in the sentry, so that can be
removed from the filters.
PiperOrigin-RevId: 211683110
Change-Id: Ic8ec960fc1c267aa7d310b8efe6e900c88a9207a
|
|
This CL adds terminal support for "docker exec". We previously only supported
consoles for the container process, but not exec processes.
The SYS_IOCTL syscall was added to the default seccomp filter list, but only
for ioctls that get/set winsize and termios structs. We need to allow these
ioctl for all containers because it's possible to run "exec -ti" on a
container that was started without an attached console, after the filters
have been installed.
Note that control-character signals are still not properly supported.
Tested with:
$ docker run --runtime=runsc -it alpine
In another terminial:
$ docker exec -it <containerid> /bin/sh
PiperOrigin-RevId: 210185456
Change-Id: I6d2401e53a7697bb988c120a8961505c335f96d9
|
|
When "exec" command is called without the "--detach" flag, we spawn a second
"exec" command and wait for that one to start. We use the pid file passed in
--pid-file to detect when this second command has started running.
However if "exec" is called with no --pid-file flag, this system breaks down,
as we don't have a pid file to wait for.
This CL ensures that the second instance of the "exec" command always writes a
pid-file, so the wait is successful.
PiperOrigin-RevId: 206002403
Change-Id: If9f2be31eb6e831734b1b833f25054ec71ab94a6
|
|
Containers are created as processes in the sandbox. Of the many things that
don't work yet, the biggest issue is that the fsgofer is launched with its root
as the sandbox's root directory. Thus, when a container is started and wants to
read anything (including the init binary of the container), the gofer tries to
serve from sandbox's root (which basically just has pause), not the container's.
PiperOrigin-RevId: 201294560
Change-Id: I6423aa8830538959c56ae908ce067e4199d627b1
|
|
This is a necessary prerequisite for supporting multiple containers in a single
sandbox.
All the commands (in cmd package) now call operations on Containers (container
package). When a Container first starts, it will create a Sandbox with the same
ID.
The Sandbox class is now simpler, as it only knows how to create boot/gofer
processes, and how to forward commands into the running boot process.
There are TODOs sprinkled around for additional support for multiple
containers. Most notably, we need to detect when a container is intended to run
in an existing sandbox (by reading the metadata), and then have some way to
signal to the sandbox to start a new container. Other urpc calls into the
sandbox need to pass the container ID, so the sandbox can run the operation on
the given container. These are only half-plummed through right now.
PiperOrigin-RevId: 196688269
Change-Id: I1ecf4abbb9dd8987a53ae509df19341aaf42b5b0
|
|
PiperOrigin-RevId: 195365050
Change-Id: I8754dc7a3fc2975d422cae453762a455478a8e6a
|
|
Detachable exec commands are handled in the client entirely and the detach option is not used anymore.
PiperOrigin-RevId: 195181272
Change-Id: I6e82a2876d2c173709c099be59670f71702e5bf0
|
|
PiperOrigin-RevId: 194583126
Change-Id: Ica1d8821a90f74e7e745962d71801c598c652463
|
