| Age | Commit message (Collapse) | Author |
|---|
|
This command takes instruction pointers from stdin and converts them into their
corresponding file names and line/column numbers in the runsc source code. The
inputs are not interpreted as actual addresses, but as synthetic values that are
exposed through /sys/kernel/debug/kcov. One can extract coverage information
from kcov and translate those values into locations in the source code by
running symbolize on the same runsc binary.
This will allow us to generate syzkaller coverage reports.
PiperOrigin-RevId: 347089624
|
|
Updates #3494
PiperOrigin-RevId: 327548511
|
|
PiperOrigin-RevId: 321053634
|
|
Previously, it was not possible to encode/decode an object graph which
contained a pointer to a field within another type. This was because the
encoder was previously unable to disambiguate a pointer to an object and a
pointer within the object.
This CL remedies this by constructing an address map tracking the full memory
range object occupy. The encoded Refvalue message has been extended to allow
references to children objects within another object. Because the encoding
process may learn about object structure over time, we cannot encode any
objects under the entire graph has been generated.
This CL also updates the state package to use standard interfaces intead of
reflection-based dispatch in order to improve performance overall. This
includes a custom wire protocol to significantly reduce the number of
allocations and take advantage of structure packing.
As part of these changes, there are a small number of minor changes in other
places of the code base:
* The lists used during encoding are changed to use intrusive lists with the
objectEncodeState directly, which required that the ilist Len() method is
updated to work properly with the ElementMapper mechanism.
* A bug is fixed in the list code wherein Remove() called on an element that is
already removed can corrupt the list (removing the element if there's only a
single element). Now the behavior is correct.
* Standard error wrapping is introduced.
* Compressio was updated to implement the new wire.Reader and wire.Writer
inteface methods directly. The lack of a ReadByte and WriteByte caused issues
not due to interface dispatch, but because underlying slices for a Read or
Write call through an interface would always escape to the heap!
* Statify has been updated to support the new APIs.
See README.md for a description of how the new mechanism works.
PiperOrigin-RevId: 318010298
|
|
This change adds a layer of abstraction around the internal Docker APIs,
and eliminates all direct dependencies on Dockerfiles in the infrastructure.
A subsequent change will automated the generation of local images (with
efficient caching). Note that this change drops the use of bazel container
rules, as that experiment does not seem to be viable.
PiperOrigin-RevId: 308095430
|
|
PiperOrigin-RevId: 307941984
|
|
PiperOrigin-RevId: 296105337
|
|
PiperOrigin-RevId: 294297004
|
|
PiperOrigin-RevId: 291745021
|
|
* Rename syncutil to sync.
* Add aliases to sync types.
* Replace existing usage of standard library sync package.
This will make it easier to swap out synchronization primitives. For example,
this will allow us to use primitives from github.com/sasha-s/go-deadlock to
check for lock ordering violations.
Updates #1472
PiperOrigin-RevId: 289033387
|
|
The simple test script has gotten out of control. Shard this script into
different pieces and attempt to impose order on overall test structure. This
change helps lay some of the foundations for future improvements.
* The runsc/test directories are moved into just test/.
* The runsc/test/testutil package is split into logical pieces.
* The scripts/ directory contains new top-level targets.
* Each test is now responsible for building targets it requires.
* The install functionality is moved into `runsc` itself for simplicity.
* The existing kokoro run_tests.sh file now just calls all (can be split).
After this change is merged, I will create multiple distinct workflows for
Kokoro, one for each of the scripts currently targeted by `run_tests.sh` today,
which should dramatically reduce the time-to-run for the Kokoro tests, and
provides a better foundation for further improvements to the infrastructure.
PiperOrigin-RevId: 267081397
|
|
PiperOrigin-RevId: 256494243
|
|
This can be merged after:
https://github.com/google/gvisor-website/pull/77
or
https://github.com/google/gvisor-website/pull/78
PiperOrigin-RevId: 253132620
|
|
Adds simple introspection for syscall compatibility information to Linux/AMD64.
Syscalls registered in the syscall table now have associated metadata like
name, support level, notes, and URLs to relevant issues.
Syscall information can be exported as a table, JSON, or CSV using the new
'runsc help syscalls' command. Users can use this info to debug and get info
on the compatibility of the version of runsc they are running or to generate
documentation.
PiperOrigin-RevId: 252558304
|
|
Containerd uses the last error message sent to the log to
print as failure cause for create/exec. This required a
few changes in the logging logic for runsc:
- cmd.Errorf/Fatalf: now writes a message with 'error'
level to containerd log, in addition to stderr and
debug logs, like before.
- log.Infof/Warningf/Fatalf: are not sent to containerd
log anymore. They are mostly used for debugging and not
useful to containerd. In most cases, --debug-log is
enabled and this avoids the logs messages from being
duplicated.
- stderr is not used as default log destination anymore.
Some commands assume stdio is for the container/process
running inside the sandbox and it's better to never use
it for logging. By default, logs are supressed now.
PiperOrigin-RevId: 251881815
|
|
It provides an easy way to run commands to quickly test gVisor.
By default it maps the host root as the container root with a
writable overlay on top (so the host root is not modified).
Example:
sudo runsc do ls -lh --color
sudo runsc do ~/src/test/my-test.sh
PiperOrigin-RevId: 243178711
Change-Id: I05f3d6ce253fe4b5f1362f4a07b5387f6ddb5dd9
|
|
Properly handle propagation options for root and mounts. Now usage of
mount options shared, rshared, and noexec cause error to start. shared/
rshared breaks sandbox=>host isolation. slave however can be supported
because changes propagate from host to sandbox.
Root FS setup moved inside the gofer. Apart from simplifying the code,
it keeps all mounts inside the namespace. And they are torn down when
the namespace is destroyed (DestroyFS is no longer needed).
PiperOrigin-RevId: 239037661
Change-Id: I8b5ee4d50da33c042ea34fa68e56514ebe20e6e0
|
|
Nothing reads them and they can simply get stale.
Generated with:
$ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD
PiperOrigin-RevId: 231818945
Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0
|
|
In this case, new mounts are not created in the host mount namspaces, so
tearDownChroot isn't needed, because chroot will be destroyed with a
sandbox mount namespace.
In additional, pivot_root can't be called instead of chroot.
PiperOrigin-RevId: 229250871
Change-Id: I765bdb587d0b8287a6a8efda8747639d37c7e7b6
|
|
This change also adds extensive testing to the p9 package via mocks. The sanity
checks and type checks are moved from the gofer into the core package, where
they can be more easily validated.
PiperOrigin-RevId: 218296768
Change-Id: I4fc3c326e7bf1e0e140a454cbacbcc6fd617ab55
|
|
The spec command is analygous to the 'runc spec' command and allows for
the convenient creation of a config.json file for users that don't have
runc handy.
Change-Id: Ifdfec37e023048ea461c32da1a9042a45b37d856
PiperOrigin-RevId: 216907826
|
|
Capabilities.Set() adds capabilities,
but doesn't remove existing ones that might have been loaded. Fixed
the code and added tests.
PiperOrigin-RevId: 213726369
Change-Id: Id7fa6fce53abf26c29b13b9157bb4c6616986fba
|
|
PiperOrigin-RevId: 211011542
Change-Id: Ib5a83a00f8eb6401603c6fb5b59afc93bac52558
|
|
Now each container gets its own dedicated gofer that is chroot'd to the
rootfs path. This is done to add an extra layer of security in case the
gofer gets compromised.
PiperOrigin-RevId: 210396476
Change-Id: Iba21360a59dfe90875d61000db103f8609157ca0
|
|
This CL adds terminal support for "docker exec". We previously only supported
consoles for the container process, but not exec processes.
The SYS_IOCTL syscall was added to the default seccomp filter list, but only
for ioctls that get/set winsize and termios structs. We need to allow these
ioctl for all containers because it's possible to run "exec -ti" on a
container that was started without an attached console, after the filters
have been installed.
Note that control-character signals are still not properly supported.
Tested with:
$ docker run --runtime=runsc -it alpine
In another terminial:
$ docker exec -it <containerid> /bin/sh
PiperOrigin-RevId: 210185456
Change-Id: I6d2401e53a7697bb988c120a8961505c335f96d9
|
|
When multiple containers run inside a sentry, each container has its own root
filesystem and set of mounts. Containers are also added after sentry boot rather
than all configured and known at boot time.
The fsgofer needs to be able to serve the root filesystem of each container.
Thus, it must be possible to add filesystems after the fsgofer has already
started.
This change:
* Creates a URPC endpoint within the gofer process that listens for requests to
serve new content.
* Enables the sentry, when starting a new container, to add the new container's
filesystem.
* Mounts those new filesystems at separate roots within the sentry.
PiperOrigin-RevId: 208903248
Change-Id: Ifa91ec9c8caf5f2f0a9eead83c4a57090ce92068
|
|
Users can now call "runsc wait <container id>" to wait on a particular process
inside the container. -pid can also be used to wait on a specific PID.
Manually tested the wait subcommand for a single waiter and multiple waiters
(simultaneously 2 processes waiting on the container and 2 processes waiting on
a PID within the container).
PiperOrigin-RevId: 202548978
Change-Id: Idd507c2cdea613c3a14879b51cfb0f7ea3fb3d4c
|
|
It prints sandbox stacks to the log to help debug stuckness. I expect
that many more options will be added in the future.
PiperOrigin-RevId: 201405931
Change-Id: I87e560800cd5a5a7b210dc25a5661363c8c3a16e
|
|
Resume checks the status of the container and unpauses the kernel
if its status is paused. Otherwise nothing happens.
Tests were added to ensure that the process is in the correct state
after various commands.
PiperOrigin-RevId: 201251234
Change-Id: Ifd11b336c33b654fea6238738f864fcf2bf81e19
|
|
Like runc, the pause command will pause the processes of the given container.
It will set that container's status to "paused."
A resume command will be be added to unpause and continue running the process.
PiperOrigin-RevId: 200789624
Change-Id: I72a5d7813d90ecfc4d01cc252d6018855016b1ea
|
|
PiperOrigin-RevId: 199808391
Change-Id: Ib37a4fb6193dc85c1f93bc16769d6aa41854b9d4
|
|
Checkpoint command is plumbed through container and sandbox.
Restore has also been added but it is only a stub. None of this
works yet. More changes to come.
PiperOrigin-RevId: 199510105
Change-Id: Ibd08d57f4737847eb25ca20b114518e487320185
|
|
This addresses the first issue reported in #59. CRI-O expects runsc to
return success to delete when --force is used with a non-existing container.
PiperOrigin-RevId: 198487418
Change-Id: If7660e8fdab1eb29549d0a7a45ea82e20a1d4f4a
|
|
This is a necessary prerequisite for supporting multiple containers in a single
sandbox.
All the commands (in cmd package) now call operations on Containers (container
package). When a Container first starts, it will create a Sandbox with the same
ID.
The Sandbox class is now simpler, as it only knows how to create boot/gofer
processes, and how to forward commands into the running boot process.
There are TODOs sprinkled around for additional support for multiple
containers. Most notably, we need to detect when a container is intended to run
in an existing sandbox (by reading the metadata), and then have some way to
signal to the sandbox to start a new container. Other urpc calls into the
sandbox need to pass the container ID, so the sandbox can run the operation on
the given container. These are only half-plummed through right now.
PiperOrigin-RevId: 196688269
Change-Id: I1ecf4abbb9dd8987a53ae509df19341aaf42b5b0
|
|
PiperOrigin-RevId: 194583126
Change-Id: Ica1d8821a90f74e7e745962d71801c598c652463
|
