| Age | Commit message (Collapse) | Author |
|---|
|
This is to troubleshoot problems with a hung process that is
not responding to 'runsc debug --stack' command.
PiperOrigin-RevId: 210483513
Change-Id: I4377b210b4e51bc8a281ad34fd94f3df13d9187d
|
|
Now each container gets its own dedicated gofer that is chroot'd to the
rootfs path. This is done to add an extra layer of security in case the
gofer gets compromised.
PiperOrigin-RevId: 210396476
Change-Id: Iba21360a59dfe90875d61000db103f8609157ca0
|
|
This CL adds terminal support for "docker exec". We previously only supported
consoles for the container process, but not exec processes.
The SYS_IOCTL syscall was added to the default seccomp filter list, but only
for ioctls that get/set winsize and termios structs. We need to allow these
ioctl for all containers because it's possible to run "exec -ti" on a
container that was started without an attached console, after the filters
have been installed.
Note that control-character signals are still not properly supported.
Tested with:
$ docker run --runtime=runsc -it alpine
In another terminial:
$ docker exec -it <containerid> /bin/sh
PiperOrigin-RevId: 210185456
Change-Id: I6d2401e53a7697bb988c120a8961505c335f96d9
|
|
Previously, runsc improperly attempted to find an executable in the container's
PATH.
We now search the PATH via the container's fsgofer rather than the host FS,
eliminating the confusing differences between paths on the host and within a
container.
PiperOrigin-RevId: 210159488
Change-Id: I228174dbebc4c5356599036d6efaa59f28ff28d2
|
|
Removed syscalls that are only used by whitelistfs
which has its own set of filters.
PiperOrigin-RevId: 209967259
Change-Id: Idb2e1b9d0201043d7cd25d96894f354729dbd089
|
|
When multiple containers run inside a sentry, each container has its own root
filesystem and set of mounts. Containers are also added after sentry boot rather
than all configured and known at boot time.
The fsgofer needs to be able to serve the root filesystem of each container.
Thus, it must be possible to add filesystems after the fsgofer has already
started.
This change:
* Creates a URPC endpoint within the gofer process that listens for requests to
serve new content.
* Enables the sentry, when starting a new container, to add the new container's
filesystem.
* Mounts those new filesystems at separate roots within the sentry.
PiperOrigin-RevId: 208903248
Change-Id: Ifa91ec9c8caf5f2f0a9eead83c4a57090ce92068
|
|
This file access type is actually called "proxy-shared", but I forgot to update
all locations.
PiperOrigin-RevId: 208832491
Change-Id: I7848bc4ec2478f86cf2de1dcd1bfb5264c6276de
|
|
Previously, gofer filesystems were configured with the default "fscache"
policy, which caches filesystem metadata and contents aggressively. While this
setting is best for performance, it means that changes from inside the sandbox
may not be immediately propagated outside the sandbox, and vice-versa.
This CL changes volumes and the root fs configuration to use a new
"remote-revalidate" cache policy which tries to retain as much caching as
possible while still making fs changes visible across the sandbox boundary.
This cache policy is enabled by default for the root filesystem. The default
value for the "--file-access" flag is still "proxy", but the behavior is
changed to use the new cache policy.
A new value for the "--file-access" flag is added, called "proxy-exclusive",
which turns on the previous aggressive caching behavior. As the name implies,
this flag should be used when the sandbox has "exclusive" access to the
filesystem.
All volume mounts are configured to use the new cache policy, since it is
safest and most likely to be correct. There is not currently a way to change
this behavior, but it's possible to add such a mechanism in the future. The
configurability is a smaller issue for volumes, since most of the expensive
application fs operations (walking + stating files) will likely served by the
root fs.
PiperOrigin-RevId: 208735037
Change-Id: Ife048fab1948205f6665df8563434dbc6ca8cfc9
|
|
Closes #94
PiperOrigin-RevId: 207997580
Change-Id: I19b426f1586b5ec12f8b0cd5884d5b401d334924
|
|
Add option to redirect packet back to netstack if it's destined to itself.
This fixes the problem where connecting to the local NIC address would
not work, e.g.:
echo bar | nc -l -p 8080 &
echo foo | nc 192.168.0.2 8080
PiperOrigin-RevId: 207995083
Change-Id: I17adc2a04df48bfea711011a5df206326a1fb8ef
|
|
SACK is disabled by default and needs to be manually enabled. It not only
improves performance, but also fixes hangs downloading files from certain
websites.
PiperOrigin-RevId: 207906742
Change-Id: I4fb7277b67bfdf83ac8195f1b9c38265a0d51e8b
|
|
PiperOrigin-RevId: 207039273
Change-Id: Ib8f55a6dc302052ab4a10ccd70b07f0d73b373df
|
|
It is unused.
PiperOrigin-RevId: 206798328
Change-Id: I2d7d27c0e4a0ef51264b900f14f1b3fdad17f2c4
|
|
Docker expects containers to be created before they are restored.
However, gVisor restoring requires specificactions regarding the kernel
and the file system. These actions were originally in booting the sandbox.
Now setting up the file system is deferred until a call to a call to
runsc start. In the restore case, the kernel is destroyed and a new kernel
is created in the same process, as we need the same process for Docker.
These changes required careful execution of concurrent processes which
required the use of a channel.
Full docker integration still needs the ability to restore into the same
container.
PiperOrigin-RevId: 205161441
Change-Id: Ie1d2304ead7e06855319d5dc310678f701bd099f
|
|
PiperOrigin-RevId: 204522004
Change-Id: I4819dc025f0a1df03ceaaba7951b1902d44562b3
|
|
Closing the control server will block until all open requests have completed.
If a control server method panics, we end up stuck because the defer'd Destroy
function will never return.
PiperOrigin-RevId: 204354676
Change-Id: I6bb1d84b31242d7c3f20d5334b1c966bd6a61dbf
|
|
PiperOrigin-RevId: 204196916
Change-Id: If632750fc6368acb835e22cfcee0ae55c8a04d16
|
|
80bdf8a4068de3ac4a73b6b61a0cdcfe3e3571af accidentally moved vdso into an
inner scope, never assigning the vdso variable passed to the Kernel and
thus skipping VDSO mappings.
Fix this and remove the ability for loadVDSO to skip VDSO mappings,
since tests that do so are gone.
PiperOrigin-RevId: 203169135
Change-Id: Ifd8cadcbaf82f959223c501edcc4d83d05327eba
|
|
PiperOrigin-RevId: 203161098
Change-Id: Ia1904420cb3ee830899d24a4fe418bba6533be64
|
|
Add option to redirect packet back to netstack if it's destined to itself.
This fixes the problem where connecting to the local NIC address would
not work, e.g.:
echo bar | nc -l -p 8080 &
echo foo | nc 192.168.0.2 8080
PiperOrigin-RevId: 203157739
Change-Id: I31c9f7c501e3f55007f25e1852c27893a16ac6c4
|
|
The /proc and /sys mounts are "mandatory" in the sense that they should be
mounted in the sandbox even when they are not included in the spec. Runsc
treats /tmp similarly, because it is faster to use the internal tmpfs
implementation instead of proxying to the host.
However, the spec may contain submounts of these mandatory mounts (particularly
for /tmp). In those cases, we must mount our mandatory mounts before the
submount, otherwise the submount will be masked.
Since the mandatory mounts are all top-level directories, we can mount them
right after the root.
PiperOrigin-RevId: 203145635
Change-Id: Id69bae771d32c1a5b67e08c8131b73d9b42b2fbf
|
|
glibc's malloc also uses SYS_TIME. Permit it.
#0 0x0000000000de6267 in time ()
#1 0x0000000000db19d8 in get_nprocs ()
#2 0x0000000000d8a31a in arena_get2.part ()
#3 0x0000000000d8ab4a in malloc ()
#4 0x0000000000d3c6b5 in __sanitizer::InternalAlloc(unsigned long, __sanitizer::SizeClassAllocatorLocalCache<__sanitizer::SizeClassAllocator32<0ul, 140737488355328ull, 0ul, __sanitizer::SizeClassMap<3ul, 4ul, 8ul, 17ul, 64ul, 14ul>, 20ul, __sanitizer::TwoLevelByteMap<32768ull, 4096ull, __sanitizer::NoOpMapUnmapCallback>, __sanitizer::NoOpMapUnmapCallback> >*, unsigned long) ()
#5 0x0000000000d4cd70 in __tsan_go_start ()
#6 0x00000000004617a3 in racecall ()
#7 0x00000000010f4ea0 in runtime.findfunctab ()
#8 0x000000000043f193 in runtime.racegostart ()
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
[mpratt@google.com: updated comments and commit message]
Signed-off-by: Michael Pratt <mpratt@google.com>
Change-Id: Ibe2d0dc3035bf5052d5fb802cfaa37c5e0e7a09a
PiperOrigin-RevId: 203042627
|
|
Closes #2
PiperOrigin-RevId: 202997196
Change-Id: I0c9f6f5a8a1abe1ae427bca5f590bdf9f82a6675
|
|
Updated how restoring occurs through boot.go with a separate Restore function.
This prevents a new process and new mounts from being created.
Added tests to ensure the container is restored.
Registered checkpoint and restore commands so they can be used.
Docker support for these commands is still limited.
Working on #80.
PiperOrigin-RevId: 202710950
Change-Id: I2b893ceaef6b9442b1ce3743bd112383cb92af0c
|
|
Users can now call "runsc wait <container id>" to wait on a particular process
inside the container. -pid can also be used to wait on a specific PID.
Manually tested the wait subcommand for a single waiter and multiple waiters
(simultaneously 2 processes waiting on the container and 2 processes waiting on
a PID within the container).
PiperOrigin-RevId: 202548978
Change-Id: Idd507c2cdea613c3a14879b51cfb0f7ea3fb3d4c
|
|
Closes #66
PiperOrigin-RevId: 202496258
Change-Id: Ib9287c5bf1279ffba1db21ebd9e6b59305cddf34
|
|
PiperOrigin-RevId: 202494747
Change-Id: I4d4a18e71468690b785060e580a5f83c616bd90f
|
|
PiperOrigin-RevId: 202185642
Change-Id: I2eefcc0b2ffadc6ef21d177a8a4ab0cda91f3399
|
|
PiperOrigin-RevId: 201995800
Change-Id: I770190d135e14ec7da4b3155009fe10121b2a502
|
|
PiperOrigin-RevId: 201978212
Change-Id: Ie3df1fd41d5293fff66b546a0c68c3bf98126067
|
|
PiperOrigin-RevId: 201742160
Change-Id: Ia9fa1442287c5f9e1196fb117c41536a80f6bb31
|
|
SIGUSR2 was being masked out to be used as a way to dump sentry
stacks. This could cause compatibility problems in cases anyone
uses SIGUSR2 to communicate with the container init process.
PiperOrigin-RevId: 201575374
Change-Id: I312246e828f38ad059139bb45b8addc2ed055d74
|
|
Before a container can be restored, the mounts must be configured.
The root and submounts and their key information is compiled into a
RestoreEnvironment.
Future code will be added to set this created environment before
restoring a container.
Tests to ensure the correct environment were added.
PiperOrigin-RevId: 201544637
Change-Id: Ia894a8b0f80f31104d1c732e113b1d65a4697087
|
|
PiperOrigin-RevId: 201539050
Change-Id: I36cbf270fa5ad25de507ecb919e4005eda6aa16d
|
|
It prints sandbox stacks to the log to help debug stuckness. I expect
that many more options will be added in the future.
PiperOrigin-RevId: 201405931
Change-Id: I87e560800cd5a5a7b210dc25a5661363c8c3a16e
|
|
Containers are created as processes in the sandbox. Of the many things that
don't work yet, the biggest issue is that the fsgofer is launched with its root
as the sandbox's root directory. Thus, when a container is started and wants to
read anything (including the init binary of the container), the gofer tries to
serve from sandbox's root (which basically just has pause), not the container's.
PiperOrigin-RevId: 201294560
Change-Id: I6423aa8830538959c56ae908ce067e4199d627b1
|
|
When running multi-container, child containers are added after the filters have
been installed. Thus, lstat must be in the set of allowed syscalls.
PiperOrigin-RevId: 201269550
Change-Id: I03f2e6675a53d462ed12a0f651c10049b76d4c52
|
|
Resume checks the status of the container and unpauses the kernel
if its status is paused. Otherwise nothing happens.
Tests were added to ensure that the process is in the correct state
after various commands.
PiperOrigin-RevId: 201251234
Change-Id: Ifd11b336c33b654fea6238738f864fcf2bf81e19
|
|
A file descriptor was added as a flag to boot so a state file can restore a
container that was checkpointed.
PiperOrigin-RevId: 201068699
Change-Id: I18e96069488ffa3add468861397f3877725544aa
|
|
PiperOrigin-RevId: 201018483
Change-Id: I52fe3d01c83c8a2f0e9275d9d88c37e46fa224a2
|
|
Like runc, the pause command will pause the processes of the given container.
It will set that container's status to "paused."
A resume command will be be added to unpause and continue running the process.
PiperOrigin-RevId: 200789624
Change-Id: I72a5d7813d90ecfc4d01cc252d6018855016b1ea
|
|
PiperOrigin-RevId: 200768923
Change-Id: I4b8da10bcac296e8171fe6754abec5aabfec5e65
|
|
The right number to use is the number of processors assigned to the cgroup. But until
we make the sandbox join the respective cgroup, just use the number of processors on
the host.
Closes #65, closes #66
PiperOrigin-RevId: 200725483
Change-Id: I34a566b1a872e26c66f56fa6e3100f42aaf802b1
|
|
golang.org/cl/108538 replaces pselect6 with nanosleep in runtime.usleep. Update
the filters accordingly.
PiperOrigin-RevId: 200574612
Change-Id: Ifb2296fcb3781518fc047aabbbffedb9ae488cd7
|
|
Boot loader tries to stat mount to determine whether it's a file or not. This
may file if the sandbox process doesn't have access to the file. Instead, add
overlay on top of file, which is better anyway since we don't want to propagate
changes to the host.
PiperOrigin-RevId: 200411261
Change-Id: I14222410e8bc00ed037b779a1883d503843ffebb
|
|
PiperOrigin-RevId: 200274828
Change-Id: I956703217df08d8650a881479b7ade8f9f119912
|
|
This is the first iteration of checkpoint that actually saves to a file.
Tests for checkpoint are included.
Ran into an issue when private unix sockets are enabled. An error message
was added for this case and the mutex state was set.
PiperOrigin-RevId: 200269470
Change-Id: I28d29a9f92c44bf73dc4a4b12ae0509ee4070e93
|
|
runsc now mounts the devpts filesystem, so you get a real terminal using
ssh+sshd.
PiperOrigin-RevId: 200244830
Change-Id: If577c805ad0138fda13103210fa47178d8ac6605
|
|
Unit tests call runsc directly now, so all command line arguments
are valid. On the other hand, enabling debug in the test binary
doesn't affect runsc. It needs to be set in the config.
PiperOrigin-RevId: 200237706
Change-Id: I0b5922db17f887f58192dbc2f8dd2fd058b76ec7
|
|
PiperOrigin-RevId: 199808391
Change-Id: Ib37a4fb6193dc85c1f93bc16769d6aa41854b9d4
|
