summaryrefslogtreecommitdiffhomepage
path: root/runsc/boot
AgeCommit message (Collapse)Author
2020-04-24Move hostfs mount to Kernel struct.Dean Deng
This is needed to set up host fds passed through a Unix socket. Note that the host package depends on kernel, so we cannot set up the hostfs mount directly in Kernel.Init as we do for sockfs and pipefs. Also, adjust sockfs to make its setup look more like hostfs's and pipefs's. PiperOrigin-RevId: 308274053
2020-04-23Add vfs.MkdirOptions.ForSyntheticMountpoint.Jamie Liu
PiperOrigin-RevId: 308143529
2020-04-23Simplify Docker test infrastructure.Adin Scannell
This change adds a layer of abstraction around the internal Docker APIs, and eliminates all direct dependencies on Dockerfiles in the infrastructure. A subsequent change will automated the generation of local images (with efficient caching). Note that this change drops the use of bazel container rules, as that experiment does not seem to be viable. PiperOrigin-RevId: 308095430
2020-04-22Move user home detection to its own library.Nicolas Lacasse
PiperOrigin-RevId: 307977689
2020-04-17Get /bin/true to run on VFS2Zach Koopmans
Included: - loader_test.go RunTest and TestStartSignal VFS2 - container_test.go TestAppExitStatus on VFS2 - experimental flag added to runsc to turn on VFS2 Note: shared mounts are not yet supported. PiperOrigin-RevId: 307070753
2020-04-14Merge pull request #2212 from aaronlu:dup_stdioFDsgVisor bot
PiperOrigin-RevId: 306477639
2020-04-10Use O_CLOEXEC when dup'ing FDsFabricio Voznika
The sentry doesn't allow execve, but it's a good defense in-depth measure. PiperOrigin-RevId: 305958737
2020-04-08Fix all copy locks violations.Adin Scannell
This required minor restructuring of how system call tables were saved and restored, but it makes way more sense this way. Updates #2243
2020-04-07Add friendlier messages for frequently encountered errors.Ian Lewis
Issue #2270 Issue #1765 PiperOrigin-RevId: 305385436
2020-03-31checkpoint/restore: make sure the donated stdioFDs have the same valueAaron Lu
Suppose I start a runsc container using kvm platform like this: $ sudo runsc --debug=true --debug-log=1.txt --platform=kvm run rootbash The donating FD and the corresponding cmdline for runsc-sandbox is: D0313 17:50:12.608203 44389 x:0] Donating FD 3: "1.txt" D0313 17:50:12.608214 44389 x:0] Donating FD 4: "control_server_socket" D0313 17:50:12.608224 44389 x:0] Donating FD 5: "|0" D0313 17:50:12.608229 44389 x:0] Donating FD 6: "/home/ziqian.lzq/bundle/bash/runsc/config.json" D0313 17:50:12.608234 44389 x:0] Donating FD 7: "|1" D0313 17:50:12.608238 44389 x:0] Donating FD 8: "sandbox IO FD" D0313 17:50:12.608242 44389 x:0] Donating FD 9: "/dev/kvm" D0313 17:50:12.608246 44389 x:0] Donating FD 10: "/dev/stdin" D0313 17:50:12.608249 44389 x:0] Donating FD 11: "/dev/stdout" D0313 17:50:12.608253 44389 x:0] Donating FD 12: "/dev/stderr" D0313 17:50:12.608257 44389 x:0] Starting sandbox: /proc/self/exe [runsc-sandbox --root=/run/containerd/runsc/default --debug=true --log= --max-threads=256 --reclaim-period=5 --log-format=text --debug-log=1.txt --debug-log-format=text --file-access=exclusive --overlay=false --fsgofer-host-uds=false --network=sandbox --log-packets=false --platform=kvm --strace=false --strace-syscalls=--strace-log-size=1024 --watchdog-action=Panic --panic-signal=-1 --profile=false --net-raw=true --num-network-channels=1 --rootless=false --alsologtostderr=false --ref-leak-mode=disabled --gso=true --software-gso=true --overlayfs-stale-read=false --shared-volume= --debug-log-fd=3 --panic-signal=15 boot --bundle=/home/ziqian.lzq/bundle/bash/runsc --controller-fd=4 --mounts-fd=5 --spec-fd=6 --start-sync-fd=7 --io-fds=8 --device-fd=9 --stdio-fds=10 --stdio-fds=11 --stdio-fds=12 --pidns=true --setup-root --cpu-num 32 --total-memory 4294967296 rootbash] Note stdioFDs starts from 10 with kvm platform and stderr's FD is 12. If I restore a container from the checkpoint image which is derived by checkpointing the above rootbash container, but either omit the platform switch or specify to use ptrace platform explicitely: $ sudo runsc --debug=true --debug-log=1.txt restore --image-path=some_path restored_rootbash the donating FD and corresponding cmdline for runsc-sandbox is: D0313 17:50:15.258632 44452 x:0] Donating FD 3: "1.txt" D0313 17:50:15.258640 44452 x:0] Donating FD 4: "control_server_socket" D0313 17:50:15.258645 44452 x:0] Donating FD 5: "|0" D0313 17:50:15.258648 44452 x:0] Donating FD 6: "/home/ziqian.lzq/bundle/bash/runsc/config.json" D0313 17:50:15.258653 44452 x:0] Donating FD 7: "|1" D0313 17:50:15.258657 44452 x:0] Donating FD 8: "sandbox IO FD" D0313 17:50:15.258661 44452 x:0] Donating FD 9: "/dev/stdin" D0313 17:50:15.258675 44452 x:0] Donating FD 10: "/dev/stdout" D0313 17:50:15.258680 44452 x:0] Donating FD 11: "/dev/stderr" D0313 17:50:15.258684 44452 x:0] Starting sandbox: /proc/self/exe [runsc-sandbox --root=/run/containerd/runsc/default --debug=true --log= --max-threads=256 --reclaim-period=5 --log-format=text --debug-log=1.txt --debug-log-format=text --file-access=exclusive --overlay=false --fsgofer-host-uds=false --network=sandbox --log-packets=false --platform=ptrace --strace=false --strace-syscalls= --strace-log-size=1024 --watchdog-action=Panic --panic-signal=-1 --profile=false --net-raw=true --num-network-channels=1 --rootless=false --alsologtostderr=false --ref-leak-mode=disabled --gso=true --software-gso=true --overlayfs-stale-read=false --shared-volume= --debug-log-fd=3 --panic-signal=15 boot --bundle=/home/ziqian.lzq/bundle/bash/runsc --controller-fd=4 --mounts-fd=5 --spec-fd=6 --start-sync-fd=7 --io-fds=8 --stdio-fds=9 --stdio-fds=10 --stdio-fds=11 --setup-root --cpu-num 32 --total-memory 4294967296 restored_rootbash] Note this time, stdioFDs starts from 9 and stderr's FD is 11(so the saved host.descritor.origFD which is 12 for stderr is no longer valid). For the three host FD based files, The s.Dev and s.Ino derived from fstat(fd) shall all be the same and since the two fields are used as device.MultiDeviceKey, the host.inodeFileState.sattr.InodeId which is the value of MultiDevice.Map(MultiDeviceKey), shall also all be the same. Note that for MultiDevice m, m.cache records the mapping of key to value and m.rcache records the mapping of value to key. If same value doesn't map to the same key, it will panic on restore. Now that stderr's origFD 12 is no longer valid(it happens to be /memfd:runsc-memory in my test on restore), the s.Dev and s.Ino derived from fstat(fd=12) in host.inodeFileState.afterLoad() will neither be correct. But its InodeID is still the same as saved, MultiDevice.Load() will complain about the same value(InodeID) being mapped to different keys (different from stdin and stdout's) and panic with: "MultiDevice's caches are inconsistent". Solve this problem by making sure stdioFDs for root container's init task are always the same on initial start and on restore time, no matter what cmdline user has used: debug log specified or not, platform changed or not etc. shall not affect the ability to restore. Fixes #1844.
2020-03-26Use host-defined file owner and mode, when possible, for imported fds.Dean Deng
Using the host-defined file owner matches VFS1. It is more correct to use the host-defined mode, since the cached value may become out of date. However, kernfs.Inode.Mode() does not return an error--other filesystems on kernfs are in-memory so retrieving mode should not fail. Therefore, if the host syscall fails, we rely on a cached value instead. Updates #1672. PiperOrigin-RevId: 303220864
2020-03-19Whitelist utimensat(2).Dean Deng
utimensat is used by hostfs for setting timestamps on imported fds. Previously, this would crash the sandbox since utimensat was not allowed. Correct the VFS2 version of hostfs to match the call in VFS1. PiperOrigin-RevId: 301970121
2020-03-14Plumb VFS2 imported fds into virtual filesystem.Dean Deng
- When setting up the virtual filesystem, mount a host.filesystem to contain all files that need to be imported. - Make read/preadv syscalls to the host in cases where preadv2 may not be supported yet (likewise for writing). - Make save/restore functions in kernel/kernel.go return early if vfs2 is enabled. PiperOrigin-RevId: 300922353
2020-03-05Merge pull request #1951 from moricho:moricho/add-profiler-optiongVisor bot
PiperOrigin-RevId: 299233818
2020-02-28Allow to specify a separate log for GO's runtime messagesAndrei Vagin
GO's runtime calls the write system call twice to print "panic:" and "the reason of this panic", so here is a race window when other threads can print something to the log and we will see something like this: panic: log messages from another thread The reason of the panic. This confuses the syzkaller blacklist and dedup detection. It also makes the logs generally difficult to read. e.g., data races often have one side of the race, followed by a large "diagnosis" dump, finally followed by the other side of the race. PiperOrigin-RevId: 297887895
2020-02-26add profile optionmoricho
2020-02-25Port most syscalls to VFS2.Jamie Liu
pipe and pipe2 aren't ported, pending a slight rework of pipe FDs for VFS2. mount and umount2 aren't ported out of temporary laziness. access and faccessat need additional FSImpl methods to implement properly, but are stubbed to prevent googletest from CHECK-failing. Other syscalls require additional plumbing. Updates #1623 PiperOrigin-RevId: 297188448
2020-02-20Initial network namespace support.gVisor bot
TCP/IP will work with netstack networking. hostinet doesn't work, and sockets will have the same behavior as it is now. Before the userspace is able to create device, the default loopback device can be used to test. /proc/net and /sys/net will still be connected to the root network stack; this is the same behavior now. Issue #1833 PiperOrigin-RevId: 296309389
2020-02-14Synchronize signalling with S/RgVisor bot
This is to fix a data race between sending an external signal to a ThreadGroup and kernel saving state for S/R. PiperOrigin-RevId: 295244281
2020-02-14Plumb VFS2 inside the SentrygVisor bot
- Added fsbridge package with interface that can be used to open and read from VFS1 and VFS2 files. - Converted ELF loader to use fsbridge - Added VFS2 types to FSContext - Added vfs.MountNamespace to ThreadGroup Updates #1623 PiperOrigin-RevId: 295183950
2020-02-05Add notes to relevant tests.Adin Scannell
These were out-of-band notes that can help provide additional context and simplify automated imports. PiperOrigin-RevId: 293525915
2020-02-03Allow mlock in system call filtersMichael Pratt
Go 1.14 has a workaround for a Linux 5.2-5.4 bug which requires mlock'ing the g stack to prevent register corruption. We need to allow this syscall until it is removed from Go. PiperOrigin-RevId: 292967478
2020-01-28Add vfs.FileDescription to FD tableFabricio Voznika
FD table now holds both VFS1 and VFS2 types and uses the correct one based on what's set. Parts of this CL are just initial changes (e.g. sys_read.go, runsc/main.go) to serve as a template for the remaining changes. Updates #1487 Updates #1623 PiperOrigin-RevId: 292023223
2020-01-27Cleanup glog and add real caller information.Adin Scannell
In general, we've learned that logging must be avoided at all costs in the hot path. It's unlikely that the optimizations here were significant in any case, since buffer would certainly escape. This also adds a test to ensure that the caller identification works as expected, and so that logging can be benchmarked. Original: BenchmarkGoogleLogging-6 1222255 949 ns/op With this change: BenchmarkGoogleLogging-6 517323 2346 ns/op Fixes #184 PiperOrigin-RevId: 291815420
2020-01-27Update package locations.Adin Scannell
Because the abi will depend on the core types for marshalling (usermem, context, safemem, safecopy), these need to be flattened from the sentry directory. These packages contain no sentry-specific details. PiperOrigin-RevId: 291811289
2020-01-27Standardize on tools directory.Adin Scannell
PiperOrigin-RevId: 291745021
2020-01-09New sync package.Ian Gudger
* Rename syncutil to sync. * Add aliases to sync types. * Replace existing usage of standard library sync package. This will make it easier to swap out synchronization primitives. For example, this will allow us to use primitives from github.com/sasha-s/go-deadlock to check for lock ordering violations. Updates #1472 PiperOrigin-RevId: 289033387
2020-01-08Combine various Create*NIC methods into CreateNICWithOptions.Bert Muthalaly
PiperOrigin-RevId: 288779416
2020-01-08Add NIC.isLoopback()Bert Muthalaly
...enabling us to remove the "CreateNamedLoopbackNIC" variant of CreateNIC and all the plumbing to connect it through to where the value is read in FindRoute. PiperOrigin-RevId: 288713093
2019-12-17Leave minimum CPU number as a constantAleksandr Razumov
Remove introduced CPUNumMin config and hard-code it as 2.
2019-12-17Add minimum CPU number and only lower CPUs on --cpu-num-from-quotaAleksandr Razumov
* Add `--cpu-num-min` flag to control minimum CPUs * Only lower CPU count * Fix comments
2019-12-15Set CPU number to CPU quotaAleksandr Razumov
When application is not cgroups-aware, it can spawn excessive threads which often defaults to CPU number. Introduce a opt-in flag that will set CPU number accordingly to CPU quota (if available). Fixes #1391
2019-12-11Enable IPv6 in runscBhasker Hariharan
Fixes #1341 PiperOrigin-RevId: 285108973
2019-12-06Bump up Go 1.13 as minimum requirementFabricio Voznika
PiperOrigin-RevId: 284320186
2019-12-06Merge pull request #1233 from xiaobo55x:compatLoggVisor bot
PiperOrigin-RevId: 284305935
2019-12-06Add runtime tracing.Adin Scannell
This adds meaningful annotations to the trace generated by the runtime/trace package. PiperOrigin-RevId: 284290115
2019-12-06Make annotations OCI compliantFabricio Voznika
Changed annotation to follow the standard defined here: https://github.com/opencontainers/image-spec/blob/master/annotations.md PiperOrigin-RevId: 284254847
2019-12-03Support IP_TOS and IPV6_TCLASS socket options for hostinet sockets.Dean Deng
There are two potential ways of sending a TOS byte with outgoing packets: including a control message in sendmsg, or setting the IP_TOS/IPV6_TCLASS socket options (for IPV4 and IPV6 respectively). This change lets hostinet support the latter. Fixes #1188 PiperOrigin-RevId: 283550925
2019-12-03Enable runsc compatLog support on arm64.Haibo Xu
Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I3fd5e552f5f03b5144ed52647f75af3b8253b1d6
2019-11-27Add support for receiving TOS and TCLASS control messages in hostinet.Dean Deng
This involves allowing getsockopt/setsockopt for the corresponding socket options, as well as allowing hostinet to process control messages received from the actual recvmsg syscall. PiperOrigin-RevId: 282851425
2019-11-25Use mount hints to determine FileAccessTypeFabricio Voznika
PiperOrigin-RevId: 282401165
2019-11-25Merge pull request #1176 from xiaobo55x:runsc_bootgVisor bot
PiperOrigin-RevId: 282382564
2019-11-13Enable runsc/boot support on arm64.Haibo Xu
This patch also include a minor change to replace syscall.Dup2 with syscall.Dup3 which was missed in a previous commit(ref a25a976). Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I00beb9cc492e44c762ebaa3750201c63c1f7c2f3
2019-11-04Add NETLINK_KOBJECT_UEVENT socket supportMichael Pratt
NETLINK_KOBJECT_UEVENT sockets send udev-style messages for device events. gVisor doesn't have any device events, so our sockets don't need to do anything once created. systemd's device manager needs to be able to create one of these sockets. It also wants to install a BPF filter on the socket. Since we'll never send any messages, the filter would never be invoked, thus we just fake it out. Fixes #1117 Updates #1119 PiperOrigin-RevId: 278405893
2019-11-01Allow the watchdog to detect when the sandbox is stuck during setup.Nicolas Lacasse
The watchdog currently can find stuck tasks, but has no way to tell if the sandbox is stuck before the application starts executing. This CL adds a startup timeout and action to the watchdog. If Start() is not called before the given timeout (if non-zero), then the watchdog will take the action. PiperOrigin-RevId: 277970577
2019-10-31Merge pull request #1058 from cmingxu:mastergVisor bot
PiperOrigin-RevId: 277623766
2019-10-30Store endpoints inside multiPortEndpoint in a sorted orderAndrei Vagin
It is required to guarantee the same order of endpoints after save/restore. PiperOrigin-RevId: 277598665
2019-10-23fix typokevin.xu
fix a typo
2019-10-23remove duplicated periodkevin.xu
remove a duplicated period
2019-10-22netstack/tcp: software segmentation offloadAndrei Vagin
Right now, we send each tcp packet separately, we call one system call per-packet. This patch allows to generate multiple tcp packets and send them by sendmmsg. The arguable part of this CL is a way how to handle multiple headers. This CL adds the next field to the Prepandable buffer. Nginx test results: Server Software: nginx/1.15.9 Server Hostname: 10.138.0.2 Server Port: 8080 Document Path: /10m.txt Document Length: 10485760 bytes w/o gso: Concurrency Level: 5 Time taken for tests: 5.491 seconds Complete requests: 100 Failed requests: 0 Total transferred: 1048600200 bytes HTML transferred: 1048576000 bytes Requests per second: 18.21 [#/sec] (mean) Time per request: 274.525 [ms] (mean) Time per request: 54.905 [ms] (mean, across all concurrent requests) Transfer rate: 186508.03 [Kbytes/sec] received sw-gso: Concurrency Level: 5 Time taken for tests: 3.852 seconds Complete requests: 100 Failed requests: 0 Total transferred: 1048600200 bytes HTML transferred: 1048576000 bytes Requests per second: 25.96 [#/sec] (mean) Time per request: 192.576 [ms] (mean) Time per request: 38.515 [ms] (mean, across all concurrent requests) Transfer rate: 265874.92 [Kbytes/sec] received w/o gso: $ ./tcp_benchmark --client --duration 15 --ideal [SUM] 0.0-15.1 sec 2.20 GBytes 1.25 Gbits/sec software gso: $ tcp_benchmark --client --duration 15 --ideal --gso $((1<<16)) --swgso [SUM] 0.0-15.1 sec 3.99 GBytes 2.26 Gbits/sec PiperOrigin-RevId: 276112677
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 09:13:39 +0000