summaryrefslogtreecommitdiffhomepage
path: root/runsc/boot
AgeCommit message (Collapse)Author
2020-01-08Add NIC.isLoopback()Bert Muthalaly
...enabling us to remove the "CreateNamedLoopbackNIC" variant of CreateNIC and all the plumbing to connect it through to where the value is read in FindRoute. PiperOrigin-RevId: 288713093
2019-12-17Leave minimum CPU number as a constantAleksandr Razumov
Remove introduced CPUNumMin config and hard-code it as 2.
2019-12-17Add minimum CPU number and only lower CPUs on --cpu-num-from-quotaAleksandr Razumov
* Add `--cpu-num-min` flag to control minimum CPUs * Only lower CPU count * Fix comments
2019-12-15Set CPU number to CPU quotaAleksandr Razumov
When application is not cgroups-aware, it can spawn excessive threads which often defaults to CPU number. Introduce a opt-in flag that will set CPU number accordingly to CPU quota (if available). Fixes #1391
2019-12-11Enable IPv6 in runscBhasker Hariharan
Fixes #1341 PiperOrigin-RevId: 285108973
2019-12-06Bump up Go 1.13 as minimum requirementFabricio Voznika
PiperOrigin-RevId: 284320186
2019-12-06Merge pull request #1233 from xiaobo55x:compatLoggVisor bot
PiperOrigin-RevId: 284305935
2019-12-06Add runtime tracing.Adin Scannell
This adds meaningful annotations to the trace generated by the runtime/trace package. PiperOrigin-RevId: 284290115
2019-12-06Make annotations OCI compliantFabricio Voznika
Changed annotation to follow the standard defined here: https://github.com/opencontainers/image-spec/blob/master/annotations.md PiperOrigin-RevId: 284254847
2019-12-03Support IP_TOS and IPV6_TCLASS socket options for hostinet sockets.Dean Deng
There are two potential ways of sending a TOS byte with outgoing packets: including a control message in sendmsg, or setting the IP_TOS/IPV6_TCLASS socket options (for IPV4 and IPV6 respectively). This change lets hostinet support the latter. Fixes #1188 PiperOrigin-RevId: 283550925
2019-12-03Enable runsc compatLog support on arm64.Haibo Xu
Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I3fd5e552f5f03b5144ed52647f75af3b8253b1d6
2019-11-27Add support for receiving TOS and TCLASS control messages in hostinet.Dean Deng
This involves allowing getsockopt/setsockopt for the corresponding socket options, as well as allowing hostinet to process control messages received from the actual recvmsg syscall. PiperOrigin-RevId: 282851425
2019-11-25Use mount hints to determine FileAccessTypeFabricio Voznika
PiperOrigin-RevId: 282401165
2019-11-25Merge pull request #1176 from xiaobo55x:runsc_bootgVisor bot
PiperOrigin-RevId: 282382564
2019-11-13Enable runsc/boot support on arm64.Haibo Xu
This patch also include a minor change to replace syscall.Dup2 with syscall.Dup3 which was missed in a previous commit(ref a25a976). Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I00beb9cc492e44c762ebaa3750201c63c1f7c2f3
2019-11-04Add NETLINK_KOBJECT_UEVENT socket supportMichael Pratt
NETLINK_KOBJECT_UEVENT sockets send udev-style messages for device events. gVisor doesn't have any device events, so our sockets don't need to do anything once created. systemd's device manager needs to be able to create one of these sockets. It also wants to install a BPF filter on the socket. Since we'll never send any messages, the filter would never be invoked, thus we just fake it out. Fixes #1117 Updates #1119 PiperOrigin-RevId: 278405893
2019-11-01Allow the watchdog to detect when the sandbox is stuck during setup.Nicolas Lacasse
The watchdog currently can find stuck tasks, but has no way to tell if the sandbox is stuck before the application starts executing. This CL adds a startup timeout and action to the watchdog. If Start() is not called before the given timeout (if non-zero), then the watchdog will take the action. PiperOrigin-RevId: 277970577
2019-10-31Merge pull request #1058 from cmingxu:mastergVisor bot
PiperOrigin-RevId: 277623766
2019-10-30Store endpoints inside multiPortEndpoint in a sorted orderAndrei Vagin
It is required to guarantee the same order of endpoints after save/restore. PiperOrigin-RevId: 277598665
2019-10-23fix typokevin.xu
fix a typo
2019-10-23remove duplicated periodkevin.xu
remove a duplicated period
2019-10-22netstack/tcp: software segmentation offloadAndrei Vagin
Right now, we send each tcp packet separately, we call one system call per-packet. This patch allows to generate multiple tcp packets and send them by sendmmsg. The arguable part of this CL is a way how to handle multiple headers. This CL adds the next field to the Prepandable buffer. Nginx test results: Server Software: nginx/1.15.9 Server Hostname: 10.138.0.2 Server Port: 8080 Document Path: /10m.txt Document Length: 10485760 bytes w/o gso: Concurrency Level: 5 Time taken for tests: 5.491 seconds Complete requests: 100 Failed requests: 0 Total transferred: 1048600200 bytes HTML transferred: 1048576000 bytes Requests per second: 18.21 [#/sec] (mean) Time per request: 274.525 [ms] (mean) Time per request: 54.905 [ms] (mean, across all concurrent requests) Transfer rate: 186508.03 [Kbytes/sec] received sw-gso: Concurrency Level: 5 Time taken for tests: 3.852 seconds Complete requests: 100 Failed requests: 0 Total transferred: 1048600200 bytes HTML transferred: 1048576000 bytes Requests per second: 25.96 [#/sec] (mean) Time per request: 192.576 [ms] (mean) Time per request: 38.515 [ms] (mean, across all concurrent requests) Transfer rate: 265874.92 [Kbytes/sec] received w/o gso: $ ./tcp_benchmark --client --duration 15 --ideal [SUM] 0.0-15.1 sec 2.20 GBytes 1.25 Gbits/sec software gso: $ tcp_benchmark --client --duration 15 --ideal --gso $((1<<16)) --swgso [SUM] 0.0-15.1 sec 3.99 GBytes 2.26 Gbits/sec PiperOrigin-RevId: 276112677
2019-10-21AF_PACKET support for netstack (aka epsocket).Kevin Krakauer
Like (AF_INET, SOCK_RAW) sockets, AF_PACKET sockets require CAP_NET_RAW. With runsc, you'll need to pass `--net-raw=true` to enable them. Binding isn't supported yet. PiperOrigin-RevId: 275909366
2019-10-16Fix problem with open FD when copy up is triggered in overlayfsFabricio Voznika
Linux kernel before 4.19 doesn't implement a feature that updates open FD after a file is open for write (and is copied to the upper layer). Already open FD will continue to read the old file content until they are reopened. This is especially problematic for gVisor because it caches open files. Flag was added to force readonly files to be reopenned when the same file is open for write. This is only needed if using kernels prior to 4.19. Closes #1006 It's difficult to really test this because we never run on tests on older kernels. I'm adding a test in GKE which uses kernels with the overlayfs problem for 1.14 and lower. PiperOrigin-RevId: 275115289
2019-10-08Remove stale TODOFabricio Voznika
PiperOrigin-RevId: 273630282
2019-10-08Ignore mount options that are not supported in shared mountsFabricio Voznika
Options that do not change mount behavior inside the Sentry are irrelevant and should not be used when looking for possible incompatibilities between master and slave mounts. PiperOrigin-RevId: 273593486
2019-10-07Implement IP_TTL.Ian Gudger
Also change the default TTL to 64 to match Linux. PiperOrigin-RevId: 273430341
2019-10-07Rename epsocket to netstack.Kevin Krakauer
PiperOrigin-RevId: 273365058
2019-09-25Merge pull request #765 from trailofbits:uds_supportgVisor bot
PiperOrigin-RevId: 271235134
2019-09-25Remove centralized registration of protocols.Kevin Krakauer
Also removes the need for protocol names. PiperOrigin-RevId: 271186030
2019-09-24Refactor command line options and remove the allowed terminology for udsRobert Tonic
2019-09-23Always set HOME env var with `runsc exec`.Nicolas Lacasse
We already do this for `runsc run`, but need to do the same for `runsc exec`. PiperOrigin-RevId: 270793459
2019-09-19Fix documentation, clean up seccomp filter installation, rename helpers.Robert Tonic
Filter installation has been streamlined and functions renamed. Documentation has been fixed to be standards compliant, and missing documentation added. gofmt has also been applied to modified files.
2019-09-19Place the host UDS mounting behind --fsgofer-host-uds-allowed.Robert Tonic
This commit allows the use of the `--fsgofer-host-uds-allowed` flag to enable mounting sockets and add the appropriate seccomp filters.
2019-09-16Bring back to life features lost in recent refactorFabricio Voznika
- Sandbox logs are generated when running tests - Kokoro uploads the sandbox logs - Supports multiple parallel runs - Revive script to install locally built runsc with docker PiperOrigin-RevId: 269337274
2019-09-12Update p9 to support flipcall.Adin Scannell
PiperOrigin-RevId: 268845090
2019-09-06Remove reundant global tcpip.LinkEndpointID.Ian Gudger
PiperOrigin-RevId: 267709597
2019-09-04Resolve flakes with TestMultiContainerDestroyFabricio Voznika
Some processes are reparented to the root container depending on the kill order and the root container would not reap in time. So some zombie processes were still present when the test checked. Fix it by running the second container inside a PID namespace. PiperOrigin-RevId: 267278591
2019-08-29Merge pull request #655 from praveensastry:feature/runsc-ref-chk-leakgVisor bot
PiperOrigin-RevId: 266226714
2019-08-27Mount volumes as super userFabricio Voznika
This used to be the case, but regressed after a recent change. Also made a few fixes around it and clean up the code a bit. Closes #720 PiperOrigin-RevId: 265717496
2019-08-22Add log prefix for better claritypraveensastry
2019-08-21Use tcpip.Subnet in tcpip.RouteTamir Duberstein
This is the first step in replacing some of the redundant types with the standard library equivalents. PiperOrigin-RevId: 264706552
2019-08-09Fix the Stringer for leak modepraveensastry
2019-08-08netstack: Don't start endpoint goroutines too soon on restore.Rahat Mahmood
Endpoint protocol goroutines were previously started as part of loading the endpoint. This is potentially too soon, as resources used by these goroutine may not have been loaded. Protocol goroutines may perform meaningful work as soon as they're started (ex: incoming connect) which can cause them to indirectly access resources that haven't been loaded yet. This CL defers resuming all protocol goroutines until the end of restore. PiperOrigin-RevId: 262409429
2019-08-06Remove traces option for ref leak modepraveensastry
2019-08-06Add option to configure reference leak checkingpraveensastry
2019-08-02Remove stale TODOFabricio Voznika
This was done in commit 04cbb13ce9b151cf906f42e3f18ce3a875f01f63 PiperOrigin-RevId: 261414748
2019-08-02Plumbing for iptables sockopts.Kevin Krakauer
PiperOrigin-RevId: 261413396
2019-08-02Stops container if gofer is killedFabricio Voznika
Each gofer now has a goroutine that polls on the FDs used to communicate with the sandbox. The respective gofer is destroyed if any of the FDs is closed. Closes #601 PiperOrigin-RevId: 261383725
2019-08-02Remove kernel.mounts.Nicolas Lacasse
We can get the mount namespace from the CreateProcessArgs in all cases where we need it. This also gets rid of kernel.Destroy method, since the only thing it was doing was DecRefing the mounts. Removing the need to call kernel.SetRootMountNamespace also allowed for some more simplifications in the container fs setup code. PiperOrigin-RevId: 261357060
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 10:30:27 +0000